Musical Fidelity A308CR Dual Mono Stereo Amp. This made in the UK amp is in excellent cosmetic and operational condition. Has 2 RCA inputs and 2 sets of speaker outputs. The sound of the amp is sublime, specially in the lower frequencies. The amp has some minor marks and scratches (please see the pictures). Amp will be shipped in custom made box with Insta-Pak foam inserts.

A dear friend left me his high end audio equipment when he passed. He was an audiophile and only bought the best for his sound room. This unit is a lot more than I need and I would love for it to go to a good home. Power cord included. If you would like more photos please contact me. The Music Fidelity A3CR is a dual mono power amplifier that puts out 120 watts per channel into 8 Ohms or 210 watts per channel into 4 Ohms. SpecificationsPower output (0.5% distortion) 120 watts per channel into 8 Ohms 210 watts per channel into 4 OhmsTHD 20Hz - 20KHz: < 0.005% at 1KHz ‘A’ weighted Frequency response: 10Hz - 20KHz +0.5dB Frequency response: 10Hz - 100KHz +2dB Channel separation: >-85dB 20Hz-20kHzInput sensitivity: 1000mV Input impedance: 31KOhm S/N ratio (Ref 1W): > -98dB ‘A’ weightedS/N ratio (dull output): > -120dB ‘A’ weightedPower consumption: 600W Max Power requirements: 100/115/230V AC 50/60Hz (Factory preset) Standard accessories: IEC type mains lead In excellent condition. Works great and remote is included! Please see photos.

Ive moved to an integrated amplifier and am selling this wonderful amplifier. It sounds and looks amazing and with its full mono design, high peak to peak current and a damping factor greater than 170, this amplifier can drive speakers with ease. I am sure you will enjoy its sound as much as I have.This will be double boxed and shipped with power cord and original box.The Musical Fidelity A3.2cr amplifier received rave reviews. Class A rating in Stereophile, “Among the best in the world,” by Hi-Fi World and “The sound shows total confidence…on a very strong emotional level” in Grammaphone are among the many accolades.The A3.2cr amplifier uses a choke regulated power supply for each channel to deliver superb fidelity. Voltage RMS 32 Volts 20Hz to 20kHzPeak 90 VoltsPower Output Single or both channels driven130 Watts per channel into 8 OhmsPeak-to-peak output current 72 AmpsDamping factor 170Gain: 30 dbSignal to noise ratio: 120dB

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

Musical Fidelity A3cr Dual Mono Power Amplifier Manual & Original Box This unit is in excellent cosmetic condition and Perfect working condition with original box and manual. I have taken pictures of all sides, top and bottom.Please ask any questions you may have. SpecificationsPower output (0.5% distortion) 120 watts per channel into 8 Ohms 210 watts per channel into 4 OhmsTHD 20Hz - 20KHz: < 0.005% at 1KHz ‘A’ weighted Frequency response: 10Hz - 20KHz +0.5dB Frequency response: 10Hz - 100KHz +2dB Channel separation: >-85dB 20Hz-20kHzInput sensitivity: 1000mV Input impedance: 31KOhm S/N ratio (Ref 1W): > -98dB ‘A’ weightedS/N ratio (dull output): > -120dB ‘A’ weightedPower consumption: 600W Max Power requirements: 100/115/230V AC 50/60Hz (Factory preset) Standard accessories: IEC type mains lead I do have 2 of these units available so check out my other listings. UPDATE: other one already Sold 11/1/23 This item will be professionally packed and shipped FedEx Insured with signature for delivery for the price quoted above or is available for FREE local pickup in Greenville, S.C. ( It can be demoed on local pickup)

Musical Fidelity A3cr Dual Mono Power Amplifier Manual & Original Box This unit is in excellent cosmetic condition and Perfect working condition with original box and manual. I have taken pictures of all sides, top and bottom.Please ask any questions you may have. SpecificationsPower output (0.5% distortion) 120 watts per channel into 8 Ohms 210 watts per channel into 4 OhmsTHD 20Hz - 20KHz: < 0.005% at 1KHz ‘A’ weighted Frequency response: 10Hz - 20KHz +0.5dB Frequency response: 10Hz - 100KHz +2dB Channel separation: >-85dB 20Hz-20kHzInput sensitivity: 1000mV Input impedance: 31KOhm S/N ratio (Ref 1W): > -98dB ‘A’ weightedS/N ratio (dull output): > -120dB ‘A’ weightedPower consumption: 600W Max Power requirements: 100/115/230V AC 50/60Hz (Factory preset) Standard accessories: IEC type mains lead I do have 2 of these units available so check out my other listings. This item will be professionally packed and shipped FedEx Insured with signature for delivery for the price quoted above or is available for FREE local pickup in Greenville, S.C. ( It can be demoed on local pickup)

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

Musical Fidelity A3cr Dual Mono Power Amplifier. This item has not been used for many years. I switched it on for the first time to test prior to listing. Hooked it up to an av pre out and it works fine. Both channels are fine. It is moved house with me a few times so it does have minor light scratches only a few and noticeable at close range. Overall it is in good condition. There is no power cable with this as it got lost. They are easily available.Due to no box and weight it is only for collection from Market Harborough. Sorry, but I won’t post this. Cash on collection is fine.

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

Musical Fidelity a3cr Power Amplifier. Silver trim. The black case is a little loose at the front where it is in contact with the front facia. It was like that from when I purchased it from a dealer many years ago as ex demo item. Not been used many years. Works as it should. There is no power cable. I only have one which I need for testing so cannot include the one pictured. It’s just a kettle lead. That’s all that is needed. Fancy cables do nothing more. Please expect light markings as this is many years old. I can’t see anything significant. It’s only for collection. There is no box and I won’t get involved in packing and couriers. This is not hi end audio, of course, but a good sound for sure. It has been unused for many years and it currently works. I cannot offer any guarantee about future reliability. Collection from Market Harborough only. Thanks for your interest.

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

Musical Fidelity A300CR Dual Mono Power Amplifier. Excellent condition. Very highly reviewed and superb sounding Power Amplifier with a massive 225 Watts per channel into 8 ohms. I have owned this Amplifier for 10 years and it has been faultless. Fully Dual Mono and Choke regulated, with 3 massive toroidal transformers and 2 chokes, this Amplifier weighs nearly 30 kg, so it is for pick up only. I can hardly carry it to the front door, let alone to the post office! I do not have the original box. PICK UP ONLY

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

Follow us| Sign up for our newsletter Musical Fidelity A308 CR - Audiophile Integrated Power Amplifier w Orig Box + Remote For over 20 years High End Audio Auctions has been selling the finest HiFi online, but did you know that we BUY your HiFi equipment as well? Contact our sister company STEREOBUYERS for a fair quote today! All items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available Musical Fidelity A308 CR Details & Testing Notes Cosmetic Condition:7/10: Good - some signs of wear, looks used but well-maintainedCosmetic Notes:Unit shows minor marks on faceplate. Good overall physical condition. Please see all high resolution photographs below.Functional Notes:Functions as intended and sounds great.Other Notes:MM Phonostage.Voltage:115V 50/60HzSerial #:BDY0224Original Box:YesManual:NoRemote:YesPower Cord:YesShipping Method:FedEx Ground (Domestic) / USPS Priority, Ebay Standard Delivery (International)Shipping Weight (lbs):46 (21x21x9) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1516 (GS 9.3 (1516))

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

We own this power amp from new, serviced with Musical Fidelity just before the company changed hands in 2018, all capacitors are new, replaced and installed from the factory. Recently upgrade our system with an McIntosh MC462 power Amp. A lot more money for not a significant upgrade, an upgrade nevertheless. And that came with a bit of a surprise, as it clearly shows what the MCA370.2 is capable of. Relevant info* https://www.petervis.com/hi-fi-info/musical-fidelity-1986/a370.html

Here is my Musical Fidelity A370 class A power amplifier In very good condition has been restored and completely rebuilt by JSA Audio to a very high standard. The only reason I’m selling is because I’ve moved house and so I’m downsizing everything including my speakers. Any questions just ask also collection only as it weighs around 40kg. Good luck

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

Musical Fidelity A308cr Dual Mono Pre Amplifier with power supplysome marks but generally in very good presentable condition for agewould prefer collection from EN1 but will post worldwide at cost.will be packed to export qualityin perfect working order. please see my other listings for leads & more Musical Fidelity equipment please see all photos as part of the condition & description of all items sent signed for - everywhere!Postage is an estimate and i will refund any difference. I do not charge any extra for postage and packing. You pay what the post office charges and no more.Check out my other items! Happy to answer any questions

Normal 0 false false false EN-GB X-NONE X-NONE Musical Fidelity A3 CR Dual Mono Power Amplifier Musical Fidelity A3 CR still in original packaging. Comes with manual and power lead. In very good used condition with surface scratches and small marks. In full working order. Power output (0.5% distortion) 120 watts per channel into 8 Ohms 210 watts per channel into 4 Ohms THD 20Hz - 20KHz < 0.005% at 1KHz ‘A’ weigthed Frequency response 10Hz - 20KHz +0.5dB Frequency response 10Hz - 100KHz +2dB Channel separation >-85dB 20Hz-20kHz Input sensitivity 1000mV Input impedance 31KOhm S/N ratio > -98dB ‘A’ weighted (Ref 1W) > -120dB ‘A’ weighted (full output) Power consumption 600W Max Dimensions Amplifier 440 x 95 x 400mm (W x H x D) Weight 15 kg Please check all of the photographs as these helps to form part of the description. If you require any help with your order, please don’t hesitate to contact us by eBay contact form.

MUSICAL FIDELITY A3cr DUAL MONO POWER AMPLIFIER SPARES. Used in my personal setup for many years. One day there was some distortion on the left channel and the then a burning smell like a struck match. The left channel is dead and will need to be repaired, Im using it as an excuse to upgrade. The unit has some scratches to the top of the fascia , the lid is dented towards the front from having the pre amplifier sat on top, can easily be hammered out flat. Overall in very good condition. Item will be professionally packaged so as to avoid any damage in transit **SPARES AND REPAIRS** Good luck and Happy Bidding