Very rare pair of Musical Fidelity M250 mono block power amplifiers complete with all original factory packaging.Perfect operationally, near mint cosmetically.Tons of power with 250 watts into 8 ohms, 450 watts into 4 ohms, and 72 amps of peak current. Will drive any loudspeaker on the planet.Will ship for a flat $98 anywhere in the CONUS ($49 per box).Also for sale on US Audio Mart, so this listing may be ended at any time.

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

MUSIC FIDELITY KW250S INTEGRATED CD PLAYER AMP TUNER LONG DISCONTINUED AND HIGHLY SOUGHT AFTER MARCH 2008 RELEASE IN FULL WORKING ORDER AND TESTED TO SPEC. VERY GOOD - EXC. USED ORDER. WITH JUST A FEW MARKS/VERY MINOR SCUFFS TO THE TOP SPEC.. incorporating valve pre-amplifier, 2 monoblock amplifiers, a CD player and DAB/FM radio. The power output is impressive, 250W into 8 ohms. This is a high-quality piece of equipment from a top British manufacturer, with a very fine reputation. These were £5000 new NO BOX, SUPPLIED WITH THE ORIGINAL DEDICATED MAINS LEAD AND A NON ORIGINAL REMOTE CONTROL WHICH OPERATES MOST OF THE ESSENTIAL FEATURES DIMENSIONS - 48CM L X 17CM H X 43CM D COLLECTION SALE FROM SOUTH LEICS WITH PAYMENT THEREON, YOU CAN VIEW AND TEST ON PICK UP NO PROBLEM. NO POSTAGE OPTIONS / NO COURIERS / NO GLOBAL SHIPPING ETC... I MAY BE ABLE TO DELIVER IN PERSON TO LOCAL / LONDON RESIDENTIAL ADDRESSES AT A PRICE, BUT IF SO PAYMENT WOULD BE TAKEN ON DROP OFF, NOT ONLINE. NO SHIPPING HUBS / NO OVERSEAS / NO P+P OPTIONS / NO COURIERS

MUSICAL FIDELITY A308CR POWER AMPLIFIERRetail Price: $4700 Cdn Selling AS-IS I purchased this very rare and fantastic a308 series amplifier made by Musical Fidelity in England from a private sale. Considered to be the best power amplifier they ever made in terms of sound quality, with a fairly beefy output at 250 watts (8 ohm) per channel. Unfortunately, it seems the amplifier is not a good match with my equipment or was damaged during shipping as there is an apparent hum/buzzing when powered up. This has been extensively upgraded and updated with top of the line parts without any compromise from the original design. All capacitors have been replaced and wiring has been upgraded amongst others as listed:• Kemet ALS10S Slit Foil PSU capacitors 10,000uF 80v which are all bypassed with TDK foil capacitors 0.1uF 400VDC. In addition, the capacitors have Mundorf capactor pads on the underside and all caps are wrapped in copper foil• All other capacitors replaced with Nichicon’s Gold Series and assorted caps – matched uF rating but higher specifications and voltage ratings• Ceramic capacitors replaced with WIMA foil capacitors• All foil caps (x15) replaced with are highly reated TDK/EPCOS foil capacitors 0.1uf 400vdc• Bridge rectifiers replaced with modern and higher spec Onsemi GBPC3504W• Kimber cable TCX 15 awg hookup wire and twisted for speaker outputs• Kimber cable TCSS 19 awg hookup wire for all signal path including the input board• Heatsinks added to select transistors for added stability• Fully biased to proper specifications with stable current and voltages on all matched output transistors.• Brand new input AC power filter• New Keratherm Red 86/82 thermal pads for all output transistors• Silver solder used throughoutThe upgrade parts alone are worth around $500 plus labour costs – and I would assume at least 10-15 hours, so most likely $1000-$1500 in labour alone. A fantastic amp and a great deal for someone who has the knowledge to look into this! Very similar to the upgrades done by Russ Andrews https://www.russandrews.com/us/musical-fidelity-a308cr-power-amp-upgrade/The previous owner has provided me with receipts and the original parts which I can pass along to you. Due to the nature of the problem and goods, I am selling this item as-is.I can ship anywhere including internationally at buyers expense. Please contact me for accurate shipping costs prior to bidding. I will accept Paypal, wire transfer, email money transfer and cash if picked up locally.

Normal 0 false false false EN-GB X-NONE X-NONE Musical Fidelity M250 Monobloc Power Amplifier (Pair) Musical Fidelity M250 comes with power lead. In very good used condition with surface scratches and small marks. In full working order. Specifications Power output: 250 watts into 8? (mono) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.006% Damping factor: 180 Gain: 30 dB Input sensitivity: 1.42V Signal to noise ratio: 115dB Speaker load impedance: 3? (minimum) Dimensions: 192 x 125 x 460mm Weight: 12kg Please check all of the photographs as these helps to form part of the description. If you require any help with your order, please don’t hesitate to contact us by eBay contact form.

Normal 0 false false false EN-GB X-NONE X-NONE Musical Fidelity M250 Monobloc Power Amplifier (Pair) Musical Fidelity M250 comes with power lead. In very good used condition with surface scratches and small marks. In full working order. Specifications Power output: 250 watts into 8? (mono) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.006% Damping factor: 180 Gain: 30 dB Input sensitivity: 1.42V Signal to noise ratio: 115dB Speaker load impedance: 3? (minimum) Dimensions: 192 x 125 x 460mm Weight: 12kg Please check all of the photographs as these helps to form part of the description. If you require any help with your order, please don’t hesitate to contact us by eBay contact form.