T.MSD309.B21B - LC420DUN - MAIN BOARD FOR BLAUPUNKT 42/131J-GB-1B-F3HCU-UK TV COMES WITH 30 DAYS WARRANTY, FULL WORKING ORDER

BLAUPUNKT 32-56I-GB-1B-F3HBKU-DE STUCK IN STANDBY? SPI FLASH IC UF11 FOR T.MSD309.B21BPLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your BLAUPUNKT 32-56I-GB-1B-F3HBKU-DE TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is only suitable for the following Blaupunkt 32-56I-GB-1B-F3HBKU-DE with main board number T.MSD309.B21B with screen LG FHD-3D. After fitting the kit you will need to carry out the first time installation for access to your local digital Freeview channels. Please ensure your leds are fully functional as this TV also suffers from the LEDS failing resulting in no backlight and no image on the screen. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC smd component. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SMD (Surface Mount Device) SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch.Any questions ask away.

BLAUPUNKT 32/56J-GB-1B-HKUP-EU STUCK IN STANDBY? SPI FLASH IC UF11 T.MSD309.B21B PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/56J led TV has a corrupted flash ic UF11 it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following TV sets: BLAUPUNKT 32/56J-GB-1B-HKUP-EU OR B32FA56HK Main Board: T.MSD309.B21B Screen number: LTA320AP05 Postage to Europe is £2.50 untracked service delivery 3 to 5 working days. After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder thesupplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32-56I-GB-1B-F3HBKU-DE STUCK IN STANDBY? SPI FLASH IC UF11 FOR T.MSD309.B21BPLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your BLAUPUNKT 32-56I-GB-1B-F3HBKU-DE TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is only suitable for the following Blaupunkt 32-56I-GB-1B-F3HBKU-DE with main board number T.MSD309.B21B with screen LG FHD-3D. After fitting the kit you will need to carry out the first time installation for access to your local digital Freeview channels. Please ensure your leds are fully functional as this TV also suffers from the LEDS failing resulting in no backlight and no image on the screen. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC smd component. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SMD (Surface Mount Device) SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch.Any questions ask away.

Scheda principale power supply Tv Qbell qxt.39ef T.msd309.b21b

BLAUPUNKT 32/56I-GB-1B-HBKUP-DE STUCK IN STANDBY? SPI FLASH IC UF11 T.MSD309.B21B PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/56I-GB-1B-HBKUP-DE led TV has a corrupted flash ic UF11 it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following TV sets:Any questions ask away. BLAUPUNKT 32/56I-GB-1B-HBKUP-DE OR B32SHE56TC Main Board: T.MSD309.B21B Screen number: LC320WXN SC B1 After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. If you are not in the UK and would like the programmed spi flash ic then please contact me for postage. Europe is £2.50 extra for a non- tracked delivery taking around 5 working days contact me if you wish to proceed and I will adjust the listing to allow you to do so. If you use ebays global shipping services there charges will be around £10!

BLAUPUNKT 32/56J-GB-1B-HKUP-EU STUCK IN STANDBY? SPI FLASH IC UF11 T.MSD309.B21B PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/56J led TV has a corrupted flash ic UF11 it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following TV sets: BLAUPUNKT 32/56J-GB-1B-HKUP-EU OR B32FA56HK Main Board: T.MSD309.B21B Screen number: LTA320AP05 Postage to Europe is £2.50 untracked service delivery 3 to 5 working days. After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder thesupplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32-56I-GB-1B-F3HBKU-DE STUCK IN STANDBY? SPI FLASH IC UF11 FOR T.MSD309.B21BPLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your BLAUPUNKT 32-56I-GB-1B-F3HBKU-DE TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is only suitable for the following Blaupunkt 32-56I-GB-1B-F3HBKU-DEwith main board number T.MSD309.B21B with screen LC320WUN (SE) (P2). After fitting the kit you will need to carry out the first time installation for access to your local digital Freeview channels. Please ensure your leds are fully functional as this TV also suffers from the LEDS failing resulting in no backlight and no image on the screen. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC smd component. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way roundthe ic should be fitted). Good soldering skills are required to fit this SMD (Surface Mount Device) SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch.Any questions ask away.

BLAUPUNKT 32-56I-GB-1B-F3HBKU-DE STUCK IN STANDBY? SPI FLASH IC UF11 FOR T.MSD309.B21BPLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your BLAUPUNKT 32-56I-GB-1B-F3HBKU-DE TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is only suitable for the following Blaupunkt 32-56I-GB-1B-F3HBKU-DE with main board number T.MSD309.B21B with screen LG FHD-3D. After fitting the kit you will need to carry out the first time installation for access to your local digital Freeview channels. Please ensure your leds are fully functional as this TV also suffers from the LEDS failing resulting in no backlight and no image on the screen. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC smd component. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SMD (Surface Mount Device) SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch.Any questions ask away.

BLAUPUNKT 42/131J-GB-1B-F3HCU-UK STUCK IN STANDBY? SPI FLASH UF11 T.MSD309.B21BPLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD !As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your BLAUPUNKT 42/131J-GB-1B-F3HCU-UK TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is only suitable for the following Blaupunkt 42/131J-GB-1B-F3HCU-UK with main board number T.MSD309.B21B with screen LC420DUN (SF) (U2). After fitting the kit you will need to carry out the first time installation for access to your local digital Freeview channels. Please ensure your leds are fully functional as this TV also suffers from the LEDS failing resulting in no backlight and no image on the screen. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC smd component. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SMD (Surface Mount Device) SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch.Any questions ask away.

BLAUPUNKT 32/56J-GB-1B-HKUP-EU STUCK IN STANDBY? SPI FLASH IC UF11 T.MSD309.B21B PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/56J led TV has a corrupted flash ic UF11 it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following TV sets: BLAUPUNKT 32/56J-GB-1B-HKUP-EU OR B32FA56HK Main Board: T.MSD309.B21B Screen number: LTA320AP05 Postage to Europe is £2.50 untracked service delivery 3 to 5 working days. After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder thesupplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32/56I-GB-1B-HBKUP-DE STUCK IN STANDBY? SPI FLASH IC UF11 T.MSD309.B21B PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/56I-GB-1B-HBKUP-DE led TV has a corrupted flash ic UF11 it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following TV sets:Any questions ask away. BLAUPUNKT 32/56I-GB-1B-HBKUP-DE OR B32SHE56TC Main Board: T.MSD309.B21B Screen number: LC320WXN SC B1 After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. If you are not in the UK and would like the programmed spi flash ic then please contact me for postage. Europe is £2.50 extra for a non- tracked delivery taking around 5 working days contact me if you wish to proceed and I will adjust the listing to allow you to do so. If you use ebays global shipping services there charges will be around £10!