Extron MPA 152 Plus Stereo Amplifier (60-844-03) with Power Supply Used Used Tested and Working Cosmetic wear - Amplifier and Box have scratches and scuffs (See Photos) Includes Extron MPA 152 Plus Stereo Amplifier Extron Power Supply Extron Safety Guide and Setup Guide Extron Power Supply and Power Cables Screw Down Terminals Sold as picturedMez-B47-cwb-5000-dw

New in box, unopened. The Extron MPA 152 Plus is a quarter rack width, stereo integrated mini power amplifier that delivers 15 watts rms per channel. The MPA 152 Plus features a 90 dB signal-to-noise ratio with 0.1% THD+N, offering exceptional performance for speaker systems requiring compact, economical audio amplification. The MPA 152 Plus is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be fanless and operate in environments with little or no ventilation.This mini power amplifier is ideal for small audio systems intended to provide a significant step-up in sound quality over the amplifiers and speakers built into displays. The MPA 152 Plus features significant performance capabilities in terms of signal-to-noise ratio and THD+N. It also features a maximum input level +12 dBu for balanced signals and +9 dBV for unbalanced signals.Energy Efficient Amplifier with Auto Power-DownThe MPA 152 Plus ENERGY STAR qualified amplifier is an energy efficient product that conserves energy and reduces costs. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes 4 watts when idle and less than 1 watt in standby mode.The MPA 152 Plus is housed in a compact 1U, quarter rack width enclosure. This amplifier is UL 2043 plenum rated, allowing for a concealed installation above a drop ceiling to prevent theft while providing convenient placement of AV equipment.The MPA 152 Plus delivers 15 watts rms per channel into 4 ohms and 8 watts rms into 8 ohms. It is optimized for driving four 8 ohm ceiling speakers, two in parallel per channel.The MPA 152 Plus accepts balanced and unbalanced stereo input signals, and provides stereo or dual mono outputs. Three individually buffered inputs are available so three separate sources can be connected without altering performance. The front panel includes controls for bass, treble, and input level, and a switch for stereo or dual mono operation. An advanced, automatic clip limiter protects speakers from clipping distortion. For applications requiring volume adjustment and muting control from a location other than the amplifier, remote control capability is available using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.FeaturesInputs: Balanced or unbalanced stereo on a captive screw connector; unbalanced stereo on RCA connectors and a 3.5 mm stereo mini jackSpeaker Outputs: 5 mm captive screw connector30 watts rms output power:2 x 15 watts @ 4 ohms, or 2 x 8 watts @ 8 ohms — The MPA 152 Plus is designed for use in classrooms and other applications requiring compact, economical audio solutions that provide a significant step-up in sound quality over the speakers built into displays.ENERGY STAR® qualified amplifier — The MPA 152 Plus is an ENERGY STAR qualified amplifier and energy efficient product that conserves energy and reduces costs.90 dB signal-to-noise ratio with 0.1% THD+N — The MPA 152 Plus ensures quiet, low-noise amplification and maintains audio signal integrity for exceptional performance in a compact, economical amplifier.Defeatable auto power-down timer for 24/7 applications — Ensures amplifier is always active for 24/7 operation in critical applications, while still retaining ENERGY STAR qualification.Extron Patented CDRS™ - Class D Ripple Suppression — CDRS is an Extron Patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.Bass, treble, and input level controlsStereo/dual mono toggle switch — Allows the user to choose between stereo output, or to sum the left and right channels into dual mono outputs.UL 2043 plenum rated — The MPA 152 Plus meets UL 2043 for smoke and heat release for installation within a plenum airspace above a drop ceiling – power supply excluded. Above-the-ceiling placement conceals the amplifier to prevent theft, and is convenient for installing equipment when space inside the room is limited.Balanced and unbalanced buffered audio inputs — Accepts balanced or unbalanced audio input signals on a captive screw connector, and unbalanced audio on both RCA connectors and a 3.5 mm stereo mini jack. The three inputs are individually buffered, and can be connected to three separate sources at the same time without altering performance.Convection cooled, fanless operation — The MPA 152 Plus does not require internal fans or vents for cooling, ensuring quiet, reliable operation. It generates substantially less heat than conventional power amplifiers, making it ideal for rack-mount applications.Auto power-down with fast power-up — The MPA 152 Plus meets ENERGY STAR qualification requirements with an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, dramatically reducing power consumption. It quickly returns to full power status in less than one second upon signal detection. This auto power-down feature can be defeated to allow for 24/7 operation.Automatic clip limiter — Detects actual onset of clipping by comparing input and output waveforms. Gain is automatically reduced without audible artifacts to protect speakers from clipping distortion.Remote volume and mute control port — In basic installations without control systems, this port allows the MPA 152 Plus to be remotely controlled using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.Rack-mountable 1U, quarter rack width metal enclosureExternal Extron Everlast power supply included, replacement part #70-1259-01 — Provides worldwide power compatibility with high?demonstrated reliability and low power consumption

Extron MPA 152 Plus Mini Power AMP with DTP HDMI 230 Tx Rack Mounted & Adapters MANUFACTURER: Extron MODEL NUMBER: MPA 152 PART NUMBER: Does not apply PHYSICAL CONDITION: Good Condition: Unit may have some scratches, scuffs, and/or slight discoloration from normal use and storage. Review pictures for more details. ITEM CONDITION: Used: Good Condition. INCLUDED: The unit comes with (1) MPA 152 Plus Mini Power Amplifier with Adapter & (1) DTP HDMI 230 Tx Transmitter with Adapter SKU Number: 178316 | SN: ** 5 SALE TERMS We are an IT/Electronic Surplus Reseller. For a lot of items we receive and sell our staff may have limited knowledge to guarantee that the item is fully functional. As a result, we like to pass the savings on to our customers and sell at below cost. We strive to list each item accurately to the best ability and post high quality pictures to give our customers a good idea of what they are bidding on. The listing is for the item described above only. If the listing states unit only, it does not come with any accessories. Do not assume, that some accessories are used for listing purposes only. If for any reason you have a problem or concern with an item you purchased from us please contact us and we will try to resolve it for you. Returns Our goal is to provide each one of our customers with a great shopping experience. If at any time you have any problems with your order, rest assured that we will try to resolve your concerns quickly and fairly All of our items come with a 30 calendar return policy (unless stated otherwise). All returns may be subject to a 20% restocking fee. If you receive an item that was not as described we will issue a return label and a replacement or refund (at the sellers discretion) within 3 business days after we receive the unit and it is verified by one of our technicians. RMAs are required for all returns. Returns/refunds are void for international buyers. Dont hesitate to get in touch with us via email or our eBay messaging system for instructions using Other. Shipping We ship all items via UPS/USPS from 30058 and ship to a confirmed Paypal address only. A signature is required for items over $100. Please get in touch with us before checking out if you need a combined shipping rate. Shipping cut-off time is 1 PM EST - Most items (except large/freight items) will be shipped within two (2) business days (excluding weekends and holidays). Customers will be contacted in the event of this exception. Our shipping system will automatically update your eBay account and send you an email with tracking information. Our warehouse is not open to the public; thus we do not offer local pickups except for freight items. All freight shipments are subject to a packaging fee starting at $25 (depending on packaging needs) which is non-negotiable. Buyers may arrange their shipping or contact us for a quote. *Please note that shipments to residential addresses or commercial addresses with limited access or no loading docks may require additional fees* If you have any special requests, please contact us via the eBay message system, our shipping department may not see it if it is added to the checkout notes. Payment Payments are made directly through eBay. Payment must be received within 3 days and unpaid cases open automatically on the 4th day. Contact Us Hours/Contact: Monday - Friday 9:00 AM to 5:30 PM EST (excluding all major holidays/weekends). Do not hesitate to contact us, if you are unsure about a price, have questions about an item or an image, or need more information regarding a listing. Contact us via the eBay message system. We will try to reply as soon as possible at the latest, the next business day. Our goal is to provide exceptional service. Do not hesitate to contact us if we do not meet that expectation!

New in box, unopened. The Extron MPA 152 Plus is a quarter rack width, stereo integrated mini power amplifier that delivers 15 watts rms per channel. The MPA 152 Plus features a 90 dB signal-to-noise ratio with 0.1% THD+N, offering exceptional performance for speaker systems requiring compact, economical audio amplification. The MPA 152 Plus is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be fanless and operate in environments with little or no ventilation.This mini power amplifier is ideal for small audio systems intended to provide a significant step-up in sound quality over the amplifiers and speakers built into displays. The MPA 152 Plus features significant performance capabilities in terms of signal-to-noise ratio and THD+N. It also features a maximum input level +12 dBu for balanced signals and +9 dBV for unbalanced signals.Energy Efficient Amplifier with Auto Power-DownThe MPA 152 Plus ENERGY STAR qualified amplifier is an energy efficient product that conserves energy and reduces costs. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes 4 watts when idle and less than 1 watt in standby mode.The MPA 152 Plus is housed in a compact 1U, quarter rack width enclosure. This amplifier is UL 2043 plenum rated, allowing for a concealed installation above a drop ceiling to prevent theft while providing convenient placement of AV equipment.The MPA 152 Plus delivers 15 watts rms per channel into 4 ohms and 8 watts rms into 8 ohms. It is optimized for driving four 8 ohm ceiling speakers, two in parallel per channel.The MPA 152 Plus accepts balanced and unbalanced stereo input signals, and provides stereo or dual mono outputs. Three individually buffered inputs are available so three separate sources can be connected without altering performance. The front panel includes controls for bass, treble, and input level, and a switch for stereo or dual mono operation. An advanced, automatic clip limiter protects speakers from clipping distortion. For applications requiring volume adjustment and muting control from a location other than the amplifier, remote control capability is available using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.FeaturesInputs: Balanced or unbalanced stereo on a captive screw connector; unbalanced stereo on RCA connectors and a 3.5 mm stereo mini jackSpeaker Outputs: 5 mm captive screw connector30 watts rms output power:2 x 15 watts @ 4 ohms, or 2 x 8 watts @ 8 ohms — The MPA 152 Plus is designed for use in classrooms and other applications requiring compact, economical audio solutions that provide a significant step-up in sound quality over the speakers built into displays.ENERGY STAR® qualified amplifier — The MPA 152 Plus is an ENERGY STAR qualified amplifier and energy efficient product that conserves energy and reduces costs.90 dB signal-to-noise ratio with 0.1% THD+N — The MPA 152 Plus ensures quiet, low-noise amplification and maintains audio signal integrity for exceptional performance in a compact, economical amplifier.Defeatable auto power-down timer for 24/7 applications — Ensures amplifier is always active for 24/7 operation in critical applications, while still retaining ENERGY STAR qualification.Extron Patented CDRS™ - Class D Ripple Suppression — CDRS is an Extron Patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.Bass, treble, and input level controlsStereo/dual mono toggle switch — Allows the user to choose between stereo output, or to sum the left and right channels into dual mono outputs.UL 2043 plenum rated — The MPA 152 Plus meets UL 2043 for smoke and heat release for installation within a plenum airspace above a drop ceiling – power supply excluded. Above-the-ceiling placement conceals the amplifier to prevent theft, and is convenient for installing equipment when space inside the room is limited.Balanced and unbalanced buffered audio inputs — Accepts balanced or unbalanced audio input signals on a captive screw connector, and unbalanced audio on both RCA connectors and a 3.5 mm stereo mini jack. The three inputs are individually buffered, and can be connected to three separate sources at the same time without altering performance.Convection cooled, fanless operation — The MPA 152 Plus does not require internal fans or vents for cooling, ensuring quiet, reliable operation. It generates substantially less heat than conventional power amplifiers, making it ideal for rack-mount applications.Auto power-down with fast power-up — The MPA 152 Plus meets ENERGY STAR qualification requirements with an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, dramatically reducing power consumption. It quickly returns to full power status in less than one second upon signal detection. This auto power-down feature can be defeated to allow for 24/7 operation.Automatic clip limiter — Detects actual onset of clipping by comparing input and output waveforms. Gain is automatically reduced without audible artifacts to protect speakers from clipping distortion.Remote volume and mute control port — In basic installations without control systems, this port allows the MPA 152 Plus to be remotely controlled using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.Rack-mountable 1U, quarter rack width metal enclosureExternal Extron Everlast power supply included, replacement part #70-1259-01 — Provides worldwide power compatibility with high?demonstrated reliability and low power consumption

17 Extron MPA 152 122 152 Plus Mini Power Amplifier & 13 Power Supplies 13 MPA 1523 MPA 1221 MPA 152 Plus13 power adapters without power plug endsships free ground GS rack 1 top

Extron MPA 152 PLUS W/ POWER SUPPLY

YOU ARE BIDDING ON A Extron MPA 152 Plus Mini Power Amplifier w/ Power Supply. 60-844-03 WE CONSIDER THIS UNIT TO BE:B-C4 F3 (Used Good) POWER SUPPLY INCLUDED WITHOUT THE STANDARD PLUG-IN CORD. UNIT POWERS ON BUT COULD NOT BE TESTED. NO ADDITIONAL HARDWARE OR COMPONENTS WILL BE INCLUDED! PLEASE SEE PICTURES! WE LOOK FORWARD TO SHIPPING YOUR Power Amplifier ! Vantage Point I.T.A.D. is an R2 V3 Certified CompanyWe are a global provider of innovative and environmentally friendly strategies for the remarketing and recycling of information technology hardware. We strive for continual opportunity to grow our business practices through education and commitment to excellence. ***SEE STORE FOR DETAILED GRADING*** All of our items are backed by a 30 day (from day of delivery) money back guarantee. (exclusions do apply)If there is something wrong with your item PLEASE message us first and allow us to correct any possible mistake.Our grading scale is reflective of the cosmetic condition of the items, please note the individual descriptions and pictures where applicable. We do not embellish descriptions, we try our best to accurately describe anything wrong with the item, but we are not experts in the devices.Items sold FOR PARTS/REPAIR are described to the best of our knowledge. Any changes to the invoice must be requested prior to paymentThank you for shopping and we look forward to meeting and hopefully exceeding your expectations!FAQ Q. What do I do if there is a problem with my order? A. Contact us immediately, we are here to help! Any issue we strive to rectify any possible issue with our valued clientele as soon as we are able! Please reach out to us! Q. When will my order ship? A. The day after the order is paid at 3pm CST. Friday shipments may go out same day but are not guaranteed. Our hours of operation are Monday-Friday 8am-5pm CST. Q. Does Vantage Point I.T.A.D. ship internationally? A. Only through Ebay GSP. All shipments (except those that go to a P.O. box) will be processed through FedEx.Q. Does my product come with any additional hardware, components or cables? A. Please check the description as all of this information will be covered, any cables or components will be specifically described and pictured!Q. Can I change the address after purchase? A. Shipping address cannot be changed after purchase. We will not ship to unverified addresses.

New in box, unopened. The Extron MPA 152 Plus is a quarter rack width, stereo integrated mini power amplifier that delivers 15 watts rms per channel. The MPA 152 Plus features a 90 dB signal-to-noise ratio with 0.1% THD+N, offering exceptional performance for speaker systems requiring compact, economical audio amplification. The MPA 152 Plus is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be fanless and operate in environments with little or no ventilation.This mini power amplifier is ideal for small audio systems intended to provide a significant step-up in sound quality over the amplifiers and speakers built into displays. The MPA 152 Plus features significant performance capabilities in terms of signal-to-noise ratio and THD+N. It also features a maximum input level +12 dBu for balanced signals and +9 dBV for unbalanced signals.Energy Efficient Amplifier with Auto Power-DownThe MPA 152 Plus ENERGY STAR qualified amplifier is an energy efficient product that conserves energy and reduces costs. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes 4 watts when idle and less than 1 watt in standby mode.The MPA 152 Plus is housed in a compact 1U, quarter rack width enclosure. This amplifier is UL 2043 plenum rated, allowing for a concealed installation above a drop ceiling to prevent theft while providing convenient placement of AV equipment.The MPA 152 Plus delivers 15 watts rms per channel into 4 ohms and 8 watts rms into 8 ohms. It is optimized for driving four 8 ohm ceiling speakers, two in parallel per channel.The MPA 152 Plus accepts balanced and unbalanced stereo input signals, and provides stereo or dual mono outputs. Three individually buffered inputs are available so three separate sources can be connected without altering performance. The front panel includes controls for bass, treble, and input level, and a switch for stereo or dual mono operation. An advanced, automatic clip limiter protects speakers from clipping distortion. For applications requiring volume adjustment and muting control from a location other than the amplifier, remote control capability is available using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.FeaturesInputs: Balanced or unbalanced stereo on a captive screw connector; unbalanced stereo on RCA connectors and a 3.5 mm stereo mini jackSpeaker Outputs: 5 mm captive screw connector30 watts rms output power:2 x 15 watts @ 4 ohms, or 2 x 8 watts @ 8 ohms — The MPA 152 Plus is designed for use in classrooms and other applications requiring compact, economical audio solutions that provide a significant step-up in sound quality over the speakers built into displays.ENERGY STAR® qualified amplifier — The MPA 152 Plus is an ENERGY STAR qualified amplifier and energy efficient product that conserves energy and reduces costs.90 dB signal-to-noise ratio with 0.1% THD+N — The MPA 152 Plus ensures quiet, low-noise amplification and maintains audio signal integrity for exceptional performance in a compact, economical amplifier.Defeatable auto power-down timer for 24/7 applications — Ensures amplifier is always active for 24/7 operation in critical applications, while still retaining ENERGY STAR qualification.Extron Patented CDRS™ - Class D Ripple Suppression — CDRS is an Extron Patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.Bass, treble, and input level controlsStereo/dual mono toggle switch — Allows the user to choose between stereo output, or to sum the left and right channels into dual mono outputs.UL 2043 plenum rated — The MPA 152 Plus meets UL 2043 for smoke and heat release for installation within a plenum airspace above a drop ceiling – power supply excluded. Above-the-ceiling placement conceals the amplifier to prevent theft, and is convenient for installing equipment when space inside the room is limited.Balanced and unbalanced buffered audio inputs — Accepts balanced or unbalanced audio input signals on a captive screw connector, and unbalanced audio on both RCA connectors and a 3.5 mm stereo mini jack. The three inputs are individually buffered, and can be connected to three separate sources at the same time without altering performance.Convection cooled, fanless operation — The MPA 152 Plus does not require internal fans or vents for cooling, ensuring quiet, reliable operation. It generates substantially less heat than conventional power amplifiers, making it ideal for rack-mount applications.Auto power-down with fast power-up — The MPA 152 Plus meets ENERGY STAR qualification requirements with an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, dramatically reducing power consumption. It quickly returns to full power status in less than one second upon signal detection. This auto power-down feature can be defeated to allow for 24/7 operation.Automatic clip limiter — Detects actual onset of clipping by comparing input and output waveforms. Gain is automatically reduced without audible artifacts to protect speakers from clipping distortion.Remote volume and mute control port — In basic installations without control systems, this port allows the MPA 152 Plus to be remotely controlled using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.Rack-mountable 1U, quarter rack width metal enclosureExternal Extron Everlast power supply included, replacement part #70-1259-01 — Provides worldwide power compatibility with high?demonstrated reliability and low power consumption

New in box, unopened. The Extron MPA 152 Plus is a quarter rack width, stereo integrated mini power amplifier that delivers 15 watts rms per channel. The MPA 152 Plus features a 90 dB signal-to-noise ratio with 0.1% THD+N, offering exceptional performance for speaker systems requiring compact, economical audio amplification. The MPA 152 Plus is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be fanless and operate in environments with little or no ventilation.This mini power amplifier is ideal for small audio systems intended to provide a significant step-up in sound quality over the amplifiers and speakers built into displays. The MPA 152 Plus features significant performance capabilities in terms of signal-to-noise ratio and THD+N. It also features a maximum input level +12 dBu for balanced signals and +9 dBV for unbalanced signals.Energy Efficient Amplifier with Auto Power-DownThe MPA 152 Plus ENERGY STAR qualified amplifier is an energy efficient product that conserves energy and reduces costs. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes 4 watts when idle and less than 1 watt in standby mode.The MPA 152 Plus is housed in a compact 1U, quarter rack width enclosure. This amplifier is UL 2043 plenum rated, allowing for a concealed installation above a drop ceiling to prevent theft while providing convenient placement of AV equipment.The MPA 152 Plus delivers 15 watts rms per channel into 4 ohms and 8 watts rms into 8 ohms. It is optimized for driving four 8 ohm ceiling speakers, two in parallel per channel.The MPA 152 Plus accepts balanced and unbalanced stereo input signals, and provides stereo or dual mono outputs. Three individually buffered inputs are available so three separate sources can be connected without altering performance. The front panel includes controls for bass, treble, and input level, and a switch for stereo or dual mono operation. An advanced, automatic clip limiter protects speakers from clipping distortion. For applications requiring volume adjustment and muting control from a location other than the amplifier, remote control capability is available using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.FeaturesInputs: Balanced or unbalanced stereo on a captive screw connector; unbalanced stereo on RCA connectors and a 3.5 mm stereo mini jackSpeaker Outputs: 5 mm captive screw connector30 watts rms output power:2 x 15 watts @ 4 ohms, or 2 x 8 watts @ 8 ohms — The MPA 152 Plus is designed for use in classrooms and other applications requiring compact, economical audio solutions that provide a significant step-up in sound quality over the speakers built into displays.ENERGY STAR® qualified amplifier — The MPA 152 Plus is an ENERGY STAR qualified amplifier and energy efficient product that conserves energy and reduces costs.90 dB signal-to-noise ratio with 0.1% THD+N — The MPA 152 Plus ensures quiet, low-noise amplification and maintains audio signal integrity for exceptional performance in a compact, economical amplifier.Defeatable auto power-down timer for 24/7 applications — Ensures amplifier is always active for 24/7 operation in critical applications, while still retaining ENERGY STAR qualification.Extron Patented CDRS™ - Class D Ripple Suppression — CDRS is an Extron Patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.Bass, treble, and input level controlsStereo/dual mono toggle switch — Allows the user to choose between stereo output, or to sum the left and right channels into dual mono outputs.UL 2043 plenum rated — The MPA 152 Plus meets UL 2043 for smoke and heat release for installation within a plenum airspace above a drop ceiling – power supply excluded. Above-the-ceiling placement conceals the amplifier to prevent theft, and is convenient for installing equipment when space inside the room is limited.Balanced and unbalanced buffered audio inputs — Accepts balanced or unbalanced audio input signals on a captive screw connector, and unbalanced audio on both RCA connectors and a 3.5 mm stereo mini jack. The three inputs are individually buffered, and can be connected to three separate sources at the same time without altering performance.Convection cooled, fanless operation — The MPA 152 Plus does not require internal fans or vents for cooling, ensuring quiet, reliable operation. It generates substantially less heat than conventional power amplifiers, making it ideal for rack-mount applications.Auto power-down with fast power-up — The MPA 152 Plus meets ENERGY STAR qualification requirements with an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, dramatically reducing power consumption. It quickly returns to full power status in less than one second upon signal detection. This auto power-down feature can be defeated to allow for 24/7 operation.Automatic clip limiter — Detects actual onset of clipping by comparing input and output waveforms. Gain is automatically reduced without audible artifacts to protect speakers from clipping distortion.Remote volume and mute control port — In basic installations without control systems, this port allows the MPA 152 Plus to be remotely controlled using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.Rack-mountable 1U, quarter rack width metal enclosureExternal Extron Everlast power supply included, replacement part #70-1259-01 — Provides worldwide power compatibility with high?demonstrated reliability and low power consumption

Lot of 3 Extron MPA 152 Plus Mini Power Amplifier w/ Power Supply. 60-844-03 . Cosmetic Description: C9 (see chart below)Functionality Description: F7 (see chart below)

Lot of 3 Extron MPA 152 Plus Mini Power Amplifier w/ Power Supply. 60-844-03 . Cosmetic Description: C9 (see chart below)Functionality Description: F7 (see chart below)

New in box, unopened. The Extron MPA 152 Plus is a quarter rack width, stereo integrated mini power amplifier that delivers 15 watts rms per channel. The MPA 152 Plus features a 90 dB signal-to-noise ratio with 0.1% THD+N, offering exceptional performance for speaker systems requiring compact, economical audio amplification. The MPA 152 Plus is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be fanless and operate in environments with little or no ventilation.This mini power amplifier is ideal for small audio systems intended to provide a significant step-up in sound quality over the amplifiers and speakers built into displays. The MPA 152 Plus features significant performance capabilities in terms of signal-to-noise ratio and THD+N. It also features a maximum input level +12 dBu for balanced signals and +9 dBV for unbalanced signals.Energy Efficient Amplifier with Auto Power-DownThe MPA 152 Plus ENERGY STAR qualified amplifier is an energy efficient product that conserves energy and reduces costs. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes 4 watts when idle and less than 1 watt in standby mode.The MPA 152 Plus is housed in a compact 1U, quarter rack width enclosure. This amplifier is UL 2043 plenum rated, allowing for a concealed installation above a drop ceiling to prevent theft while providing convenient placement of AV equipment.The MPA 152 Plus delivers 15 watts rms per channel into 4 ohms and 8 watts rms into 8 ohms. It is optimized for driving four 8 ohm ceiling speakers, two in parallel per channel.The MPA 152 Plus accepts balanced and unbalanced stereo input signals, and provides stereo or dual mono outputs. Three individually buffered inputs are available so three separate sources can be connected without altering performance. The front panel includes controls for bass, treble, and input level, and a switch for stereo or dual mono operation. An advanced, automatic clip limiter protects speakers from clipping distortion. For applications requiring volume adjustment and muting control from a location other than the amplifier, remote control capability is available using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.FeaturesInputs: Balanced or unbalanced stereo on a captive screw connector; unbalanced stereo on RCA connectors and a 3.5 mm stereo mini jackSpeaker Outputs: 5 mm captive screw connector30 watts rms output power:2 x 15 watts @ 4 ohms, or 2 x 8 watts @ 8 ohms — The MPA 152 Plus is designed for use in classrooms and other applications requiring compact, economical audio solutions that provide a significant step-up in sound quality over the speakers built into displays.ENERGY STAR® qualified amplifier — The MPA 152 Plus is an ENERGY STAR qualified amplifier and energy efficient product that conserves energy and reduces costs.90 dB signal-to-noise ratio with 0.1% THD+N — The MPA 152 Plus ensures quiet, low-noise amplification and maintains audio signal integrity for exceptional performance in a compact, economical amplifier.Defeatable auto power-down timer for 24/7 applications — Ensures amplifier is always active for 24/7 operation in critical applications, while still retaining ENERGY STAR qualification.Extron Patented CDRS™ - Class D Ripple Suppression — CDRS is an Extron Patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.Bass, treble, and input level controlsStereo/dual mono toggle switch — Allows the user to choose between stereo output, or to sum the left and right channels into dual mono outputs.UL 2043 plenum rated — The MPA 152 Plus meets UL 2043 for smoke and heat release for installation within a plenum airspace above a drop ceiling – power supply excluded. Above-the-ceiling placement conceals the amplifier to prevent theft, and is convenient for installing equipment when space inside the room is limited.Balanced and unbalanced buffered audio inputs — Accepts balanced or unbalanced audio input signals on a captive screw connector, and unbalanced audio on both RCA connectors and a 3.5 mm stereo mini jack. The three inputs are individually buffered, and can be connected to three separate sources at the same time without altering performance.Convection cooled, fanless operation — The MPA 152 Plus does not require internal fans or vents for cooling, ensuring quiet, reliable operation. It generates substantially less heat than conventional power amplifiers, making it ideal for rack-mount applications.Auto power-down with fast power-up — The MPA 152 Plus meets ENERGY STAR qualification requirements with an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, dramatically reducing power consumption. It quickly returns to full power status in less than one second upon signal detection. This auto power-down feature can be defeated to allow for 24/7 operation.Automatic clip limiter — Detects actual onset of clipping by comparing input and output waveforms. Gain is automatically reduced without audible artifacts to protect speakers from clipping distortion.Remote volume and mute control port — In basic installations without control systems, this port allows the MPA 152 Plus to be remotely controlled using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.Rack-mountable 1U, quarter rack width metal enclosureExternal Extron Everlast power supply included, replacement part #70-1259-01 — Provides worldwide power compatibility with high?demonstrated reliability and low power consumption

Lot of 3 Extron MPA 152 Plus Mini Power Amplifier w/ Power Supply. 60-844-03 . Cosmetic Description: C9 (see chart below)Functionality Description: F7 (see chart below)

Lot of 3 Extron MPA 152 Plus Mini Power Amplifier w/ Power Supply. 60-844-03 . Cosmetic Description: C9 (see chart below)Functionality Description: F7 (see chart below)

Lot of 3 Extron MPA 152 Plus Mini Power Amplifier w/ Power Supply. 60-844-03 . Cosmetic Description: C9 (see chart below)Functionality Description: F7 (see chart below)

Unit powers on. No other testing has been done. Selling AS IS, please see photos There is a sticker on each unit saying Lounge. No visible scratches. Comes in original box. Comes with manual

New in box, unopened. The Extron MPA 152 Plus is a quarter rack width, stereo integrated mini power amplifier that delivers 15 watts rms per channel. The MPA 152 Plus features a 90 dB signal-to-noise ratio with 0.1% THD+N, offering exceptional performance for speaker systems requiring compact, economical audio amplification. The MPA 152 Plus is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be fanless and operate in environments with little or no ventilation.This mini power amplifier is ideal for small audio systems intended to provide a significant step-up in sound quality over the amplifiers and speakers built into displays. The MPA 152 Plus features significant performance capabilities in terms of signal-to-noise ratio and THD+N. It also features a maximum input level +12 dBu for balanced signals and +9 dBV for unbalanced signals.Energy Efficient Amplifier with Auto Power-DownThe MPA 152 Plus ENERGY STAR qualified amplifier is an energy efficient product that conserves energy and reduces costs. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes 4 watts when idle and less than 1 watt in standby mode.The MPA 152 Plus is housed in a compact 1U, quarter rack width enclosure. This amplifier is UL 2043 plenum rated, allowing for a concealed installation above a drop ceiling to prevent theft while providing convenient placement of AV equipment.The MPA 152 Plus delivers 15 watts rms per channel into 4 ohms and 8 watts rms into 8 ohms. It is optimized for driving four 8 ohm ceiling speakers, two in parallel per channel.The MPA 152 Plus accepts balanced and unbalanced stereo input signals, and provides stereo or dual mono outputs. Three individually buffered inputs are available so three separate sources can be connected without altering performance. The front panel includes controls for bass, treble, and input level, and a switch for stereo or dual mono operation. An advanced, automatic clip limiter protects speakers from clipping distortion. For applications requiring volume adjustment and muting control from a location other than the amplifier, remote control capability is available using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.FeaturesInputs: Balanced or unbalanced stereo on a captive screw connector; unbalanced stereo on RCA connectors and a 3.5 mm stereo mini jackSpeaker Outputs: 5 mm captive screw connector30 watts rms output power:2 x 15 watts @ 4 ohms, or 2 x 8 watts @ 8 ohms — The MPA 152 Plus is designed for use in classrooms and other applications requiring compact, economical audio solutions that provide a significant step-up in sound quality over the speakers built into displays.ENERGY STAR® qualified amplifier — The MPA 152 Plus is an ENERGY STAR qualified amplifier and energy efficient product that conserves energy and reduces costs.90 dB signal-to-noise ratio with 0.1% THD+N — The MPA 152 Plus ensures quiet, low-noise amplification and maintains audio signal integrity for exceptional performance in a compact, economical amplifier.Defeatable auto power-down timer for 24/7 applications — Ensures amplifier is always active for 24/7 operation in critical applications, while still retaining ENERGY STAR qualification.Extron Patented CDRS™ - Class D Ripple Suppression — CDRS is an Extron Patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.Bass, treble, and input level controlsStereo/dual mono toggle switch — Allows the user to choose between stereo output, or to sum the left and right channels into dual mono outputs.UL 2043 plenum rated — The MPA 152 Plus meets UL 2043 for smoke and heat release for installation within a plenum airspace above a drop ceiling – power supply excluded. Above-the-ceiling placement conceals the amplifier to prevent theft, and is convenient for installing equipment when space inside the room is limited.Balanced and unbalanced buffered audio inputs — Accepts balanced or unbalanced audio input signals on a captive screw connector, and unbalanced audio on both RCA connectors and a 3.5 mm stereo mini jack. The three inputs are individually buffered, and can be connected to three separate sources at the same time without altering performance.Convection cooled, fanless operation — The MPA 152 Plus does not require internal fans or vents for cooling, ensuring quiet, reliable operation. It generates substantially less heat than conventional power amplifiers, making it ideal for rack-mount applications.Auto power-down with fast power-up — The MPA 152 Plus meets ENERGY STAR qualification requirements with an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, dramatically reducing power consumption. It quickly returns to full power status in less than one second upon signal detection. This auto power-down feature can be defeated to allow for 24/7 operation.Automatic clip limiter — Detects actual onset of clipping by comparing input and output waveforms. Gain is automatically reduced without audible artifacts to protect speakers from clipping distortion.Remote volume and mute control port — In basic installations without control systems, this port allows the MPA 152 Plus to be remotely controlled using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.Rack-mountable 1U, quarter rack width metal enclosureExternal Extron Everlast power supply included, replacement part #70-1259-01 — Provides worldwide power compatibility with high?demonstrated reliability and low power consumption

New in box, unopened. The Extron MPA 152 Plus is a quarter rack width, stereo integrated mini power amplifier that delivers 15 watts rms per channel. The MPA 152 Plus features a 90 dB signal-to-noise ratio with 0.1% THD+N, offering exceptional performance for speaker systems requiring compact, economical audio amplification. The MPA 152 Plus is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be fanless and operate in environments with little or no ventilation.This mini power amplifier is ideal for small audio systems intended to provide a significant step-up in sound quality over the amplifiers and speakers built into displays. The MPA 152 Plus features significant performance capabilities in terms of signal-to-noise ratio and THD+N. It also features a maximum input level +12 dBu for balanced signals and +9 dBV for unbalanced signals.Energy Efficient Amplifier with Auto Power-DownThe MPA 152 Plus ENERGY STAR qualified amplifier is an energy efficient product that conserves energy and reduces costs. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes 4 watts when idle and less than 1 watt in standby mode.The MPA 152 Plus is housed in a compact 1U, quarter rack width enclosure. This amplifier is UL 2043 plenum rated, allowing for a concealed installation above a drop ceiling to prevent theft while providing convenient placement of AV equipment.The MPA 152 Plus delivers 15 watts rms per channel into 4 ohms and 8 watts rms into 8 ohms. It is optimized for driving four 8 ohm ceiling speakers, two in parallel per channel.The MPA 152 Plus accepts balanced and unbalanced stereo input signals, and provides stereo or dual mono outputs. Three individually buffered inputs are available so three separate sources can be connected without altering performance. The front panel includes controls for bass, treble, and input level, and a switch for stereo or dual mono operation. An advanced, automatic clip limiter protects speakers from clipping distortion. For applications requiring volume adjustment and muting control from a location other than the amplifier, remote control capability is available using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.FeaturesInputs: Balanced or unbalanced stereo on a captive screw connector; unbalanced stereo on RCA connectors and a 3.5 mm stereo mini jackSpeaker Outputs: 5 mm captive screw connector30 watts rms output power:2 x 15 watts @ 4 ohms, or 2 x 8 watts @ 8 ohms — The MPA 152 Plus is designed for use in classrooms and other applications requiring compact, economical audio solutions that provide a significant step-up in sound quality over the speakers built into displays.ENERGY STAR® qualified amplifier — The MPA 152 Plus is an ENERGY STAR qualified amplifier and energy efficient product that conserves energy and reduces costs.90 dB signal-to-noise ratio with 0.1% THD+N — The MPA 152 Plus ensures quiet, low-noise amplification and maintains audio signal integrity for exceptional performance in a compact, economical amplifier.Defeatable auto power-down timer for 24/7 applications — Ensures amplifier is always active for 24/7 operation in critical applications, while still retaining ENERGY STAR qualification.Extron Patented CDRS™ - Class D Ripple Suppression — CDRS is an Extron Patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.Bass, treble, and input level controlsStereo/dual mono toggle switch — Allows the user to choose between stereo output, or to sum the left and right channels into dual mono outputs.UL 2043 plenum rated — The MPA 152 Plus meets UL 2043 for smoke and heat release for installation within a plenum airspace above a drop ceiling – power supply excluded. Above-the-ceiling placement conceals the amplifier to prevent theft, and is convenient for installing equipment when space inside the room is limited.Balanced and unbalanced buffered audio inputs — Accepts balanced or unbalanced audio input signals on a captive screw connector, and unbalanced audio on both RCA connectors and a 3.5 mm stereo mini jack. The three inputs are individually buffered, and can be connected to three separate sources at the same time without altering performance.Convection cooled, fanless operation — The MPA 152 Plus does not require internal fans or vents for cooling, ensuring quiet, reliable operation. It generates substantially less heat than conventional power amplifiers, making it ideal for rack-mount applications.Auto power-down with fast power-up — The MPA 152 Plus meets ENERGY STAR qualification requirements with an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, dramatically reducing power consumption. It quickly returns to full power status in less than one second upon signal detection. This auto power-down feature can be defeated to allow for 24/7 operation.Automatic clip limiter — Detects actual onset of clipping by comparing input and output waveforms. Gain is automatically reduced without audible artifacts to protect speakers from clipping distortion.Remote volume and mute control port — In basic installations without control systems, this port allows the MPA 152 Plus to be remotely controlled using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.Rack-mountable 1U, quarter rack width metal enclosureExternal Extron Everlast power supply included, replacement part #70-1259-01 — Provides worldwide power compatibility with high?demonstrated reliability and low power consumption

New in box, unopened. The Extron MPA 152 Plus is a quarter rack width, stereo integrated mini power amplifier that delivers 15 watts rms per channel. The MPA 152 Plus features a 90 dB signal-to-noise ratio with 0.1% THD+N, offering exceptional performance for speaker systems requiring compact, economical audio amplification. The MPA 152 Plus is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be fanless and operate in environments with little or no ventilation.This mini power amplifier is ideal for small audio systems intended to provide a significant step-up in sound quality over the amplifiers and speakers built into displays. The MPA 152 Plus features significant performance capabilities in terms of signal-to-noise ratio and THD+N. It also features a maximum input level +12 dBu for balanced signals and +9 dBV for unbalanced signals.Energy Efficient Amplifier with Auto Power-DownThe MPA 152 Plus ENERGY STAR qualified amplifier is an energy efficient product that conserves energy and reduces costs. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes 4 watts when idle and less than 1 watt in standby mode.The MPA 152 Plus is housed in a compact 1U, quarter rack width enclosure. This amplifier is UL 2043 plenum rated, allowing for a concealed installation above a drop ceiling to prevent theft while providing convenient placement of AV equipment.The MPA 152 Plus delivers 15 watts rms per channel into 4 ohms and 8 watts rms into 8 ohms. It is optimized for driving four 8 ohm ceiling speakers, two in parallel per channel.The MPA 152 Plus accepts balanced and unbalanced stereo input signals, and provides stereo or dual mono outputs. Three individually buffered inputs are available so three separate sources can be connected without altering performance. The front panel includes controls for bass, treble, and input level, and a switch for stereo or dual mono operation. An advanced, automatic clip limiter protects speakers from clipping distortion. For applications requiring volume adjustment and muting control from a location other than the amplifier, remote control capability is available using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.FeaturesInputs: Balanced or unbalanced stereo on a captive screw connector; unbalanced stereo on RCA connectors and a 3.5 mm stereo mini jackSpeaker Outputs: 5 mm captive screw connector30 watts rms output power:2 x 15 watts @ 4 ohms, or 2 x 8 watts @ 8 ohms — The MPA 152 Plus is designed for use in classrooms and other applications requiring compact, economical audio solutions that provide a significant step-up in sound quality over the speakers built into displays.ENERGY STAR® qualified amplifier — The MPA 152 Plus is an ENERGY STAR qualified amplifier and energy efficient product that conserves energy and reduces costs.90 dB signal-to-noise ratio with 0.1% THD+N — The MPA 152 Plus ensures quiet, low-noise amplification and maintains audio signal integrity for exceptional performance in a compact, economical amplifier.Defeatable auto power-down timer for 24/7 applications — Ensures amplifier is always active for 24/7 operation in critical applications, while still retaining ENERGY STAR qualification.Extron Patented CDRS™ - Class D Ripple Suppression — CDRS is an Extron Patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.Bass, treble, and input level controlsStereo/dual mono toggle switch — Allows the user to choose between stereo output, or to sum the left and right channels into dual mono outputs.UL 2043 plenum rated — The MPA 152 Plus meets UL 2043 for smoke and heat release for installation within a plenum airspace above a drop ceiling – power supply excluded. Above-the-ceiling placement conceals the amplifier to prevent theft, and is convenient for installing equipment when space inside the room is limited.Balanced and unbalanced buffered audio inputs — Accepts balanced or unbalanced audio input signals on a captive screw connector, and unbalanced audio on both RCA connectors and a 3.5 mm stereo mini jack. The three inputs are individually buffered, and can be connected to three separate sources at the same time without altering performance.Convection cooled, fanless operation — The MPA 152 Plus does not require internal fans or vents for cooling, ensuring quiet, reliable operation. It generates substantially less heat than conventional power amplifiers, making it ideal for rack-mount applications.Auto power-down with fast power-up — The MPA 152 Plus meets ENERGY STAR qualification requirements with an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, dramatically reducing power consumption. It quickly returns to full power status in less than one second upon signal detection. This auto power-down feature can be defeated to allow for 24/7 operation.Automatic clip limiter — Detects actual onset of clipping by comparing input and output waveforms. Gain is automatically reduced without audible artifacts to protect speakers from clipping distortion.Remote volume and mute control port — In basic installations without control systems, this port allows the MPA 152 Plus to be remotely controlled using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.Rack-mountable 1U, quarter rack width metal enclosureExternal Extron Everlast power supply included, replacement part #70-1259-01 — Provides worldwide power compatibility with high?demonstrated reliability and low power consumption

All 13 are in excellent working condition No cords FREE SHIPPING HD2

Extron DTP HDMI 230 RX Receiver AND MPA 152 Plus Mini Power Amp ---No Cords CC3

Extrinsic Mini Power Amplifier MPA 152 With Power Supply 28-113-05LF.

Extron Mini Power Amplifier 15 Watt/Channel Manufacturer - Extron Model - MPA 152 PLUS Part No. - 60-844-03 Condition - Used Manufacturers Description: The Extron MPA 152 Plus is a quarter rack width, stereo integrated mini power amplifier that delivers 15 watts rms per channel. The MPA 152 Plus features a 90 dB signal-to-noise ratio with 0.1% THD+N, offering exceptional performance for speaker systems requiring compact, economical audio amplification. The MPA 152 Plus is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be fanless and operate in environments with little or no ventilation. The unit is used but in good condition and perfect working order.