????Including & Condition Details: As shown in photos. MICRO BL-101 Turntable Arm base A1205/Rubber belt included A turntable was released in 1982. This is a belt drive type short arm exclusive model, and the arm base is compatible with the MICRO A-1200 series. Produces a lingering sound unique to belt drives. ?Condition Each part has been polished/cleaned. Depending on the level of scratches, the dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polish the platter and metal parts until they are as clean as possible to remove dirt and rust. Dust cover/lever, plate section/platter/rubber mat - The cover has no noticeable scratches and is transparent and clean. ?Buttons and panels are also glossy. ?The platter is also glossy with only a few dull spots remaining. ?The rubber mat is also in a soft condition with no deterioration or warping. ?There are some scratches on the arm base, but no major damage is visible. Cabinet - Although it will not be visible after the outer platter is set, ?there are some faint linear marks on the inner platter. ?Other than that, there is no noticeable damage and it is shiny. ?Hinges also remain open without damage. -The rubber inside the insulator is elastic and functions without problems. It is in good overall condition. Considering its age, we judge it to be a good product. We perform aging for half a day to one day to confirm the operation. For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. Turntable Works well, rotates normally, and can switch between 33 and 45 rotations/adjust speed. The stable rotation has also been confirmed using a stroboscope. ?There is no problem with strobe lighting. ?Product contents Manufacturer: MICRO Model number: BL-101 Dimensions: Width 532x Height 215x Depth 420mm Weight: 18kg Tonearm compatible with the A-1205 base ?MICRO MA-505XII, 505SII, 505MKIII, 808X ?AUDIO CRAFT AC-3000MC ?Accessories ?Dust cover ?Platter fixing screw x 3 ?Rubber mat ?Rubber belt ?Instruction manual (copy) ?Arm base (MICRO A1205 hole Diameter: approx. 37mm) ?Ground wire ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Template CDGSlightly scratched and dirtyBLU Description MICRO BL-101 It has a few scratches on the corners, but other than that its in great condition. The belt may be deteriorated, so it is the current condition. Payment We accept PayPal only. Please make a payment within 3 days after send my invoice. Shipping Free shipping! We will ship by EMS?FedEx?DHL(Insured, Trackable, Including handling cost.) EMS (takes 4~7 days, includes with insurance & a tracking number). EMS (Express Mail Service) is international mailing service by Japan Post Office. We will ship your item within 2-5 business days, after your payment. We can ship ONLY to your Paypal address. About Us Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. International Buyers - Please Note: ?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.

Original Micro Seiki armboard A-1205 for Micro Seiki BL and SX Serie from BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120.Made in gunmetal. Micro Seiki model compatibility: BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120 Tonearm compatibility: MICRO/MA-505X2, 505S2, 505MK2, MA-808X, Audio Craft/AC-3000MC Mounting hole diameter ~37mm Located in the Czech Republic, no special fees for EU customers. Express Shipping : 3 - 10 days.Standard Shipping : 7 -14 days.Economy Shipping : 10 - 28 days. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. If you have any other questions, please do not hesitate to contact us.

Original Micro Seiki armboard A-1205 for Micro Seiki BL and SX Serie from BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120.Made in gunmetal. Micro Seiki model compatibility: BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120 Tonearm compatibility: MICRO/MA-505X2, 505S2, 505MK2, MA-808X, Audio Craft/AC-3000MC Mounting hole diameter ~37mm Located in the Czech Republic, no special fees for EU customers. Express Shipping : 3 - 10 days.Standard Shipping : 7 -14 days.Economy Shipping : 10 - 28 days. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. If you have any other questions, please do not hesitate to contact us.

Original Micro Seiki armboard A-1205 for Micro Seiki BL and SX Serie from BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120.Made in gunmetal. Micro Seiki model compatibility: BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120 Tonearm compatibility: MICRO/MA-505X2, 505S2, 505MK2, MA-808X, Audio Craft/AC-3000MC Mounting hole diameter ~37mm Located in the Czech Republic, no special fees for EU customers. Express Shipping : 3 - 10 days.Standard Shipping : 7 -14 days.Economy Shipping : 10 - 28 days. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. If you have any other questions, please do not hesitate to contact us.

Original Micro Seiki armboard A-1205 for Micro Seiki BL and SX Serie from BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120.Made in gunmetal. Micro Seiki model compatibility: BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120 Tonearm compatibility: MICRO/MA-505X2, 505S2, 505MK2, MA-808X, Audio Craft/AC-3000MC Mounting hole diameter ~37mm Located in the Czech Republic, no special fees for EU customers. Express Shipping : 3 - 10 days.Standard Shipping : 7 -14 days.Economy Shipping : 10 - 28 days. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. If you have any other questions, please do not hesitate to contact us.

Original Micro Seiki armboard A-1205 for Micro Seiki BL and SX Serie from BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120.Made in gunmetal. Micro Seiki model compatibility: BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120 Tonearm compatibility: MICRO/MA-505X2, 505S2, 505MK2, MA-808X, Audio Craft/AC-3000MC Mounting hole diameter ~37mm Located in the Czech Republic, no special fees for EU customers. Express Shipping : 3 - 10 days.Standard Shipping : 7 -14 days.Economy Shipping : 10 - 28 days. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. If you have any other questions, please do not hesitate to contact us.

Original Micro Seiki armboard A-1205 for Micro Seiki BL and SX Serie from BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120.Made in gunmetal. Micro Seiki model compatibility: BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120 Tonearm compatibility: MICRO/MA-505X2, 505S2, 505MK2, MA-808X, Audio Craft/AC-3000MC Mounting hole diameter ~37mm Located in the Czech Republic, no special fees for EU customers. Express Shipping : 3 - 10 days.Standard Shipping : 7 -14 days.Economy Shipping : 10 - 28 days. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. If you have any other questions, please do not hesitate to contact us.

Original Micro Seiki armboard A-1205 for Micro Seiki BL and SX Serie from BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120.Made in gunmetal. Micro Seiki model compatibility: BL-91, BL-101, BL-111, SX-111 FV, SX-555 FVW and DQL-120 Tonearm compatibility: MICRO/MA-505X2, 505S2, 505MK2, MA-808X, Audio Craft/AC-3000MC Mounting hole diameter ~37mm Located in the Czech Republic, no special fees for EU customers. Express Shipping : 3 - 10 days.Standard Shipping : 7 -14 days.Economy Shipping : 10 - 28 days. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. If you have any other questions, please do not hesitate to contact us.

DescriptionAll items in my store are 100% authentic.Please contact me if you have any questions.ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.FedEx or DHL or Japan Post serviceShip our within 10 business days once receive payment About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. These charges are normally collected by the delivering freight company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.Thank you for your understanding.KJ

Micro Seiki A-1206 , armboard for BL-77, BL-91, BL-101, BL-111, with SME tonearm ,( its not original) - made exactly according to the original - material anodized aluminum - new piece in perfect condition, high quality- weight 465g