MICRO SEIKI RX-5000 Analog TurntableRY5500 MotorSAEC WE-506/30 Tonearm Input Voltage : 100V Our price is 100% negotiable! The price just means ASK!Please make an offer and we will give you the best price! Attention Buyers!! The voltage for this electronic device is 100V and made for Japan use ONLY. We are not responsible for the damage of this device if you use it without a proper transformer. Payment PayPal ONLY.Please pay within 5 days after auction is finished. Shipping DHL shipping We ONLY ship to buyers Paypal registered address. Please Note International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior.

Micro Seiki MA 100S Tonearm For Turntable Cartridge. Parts Or Fix The bearing needs attention. There is a TINY bit of play. It might need Tightening. I can’t get the bearing screw off and will leave this to an expert. The bias guide rod is missing Continuity is good. Pretty clean and will look even better after a proper polish I did not do a deep clean. No cable These are fantastic Tonearms when brought up to spec and super super rare Sold as seen.

This highly regarded and sought after vintage unit features exceptional engineering, minimalist design and incredible sound. Included in the sale are:DDX-1000 turntable with control and power unit, including original operating manualMicro MA-505 MK III Dynamic Balance Tonearm, with original operating and service manualsTonearm MountCardas cable interfaceBlue Point Special EVO III cartridge (very low listening hours)The turntable will be disassembled for shipping: Platter removed and wrapped, control unit wrapped, tonearm packaged in a foam formed box. Cartridge will be removed only at buyers request and packaged separately.

Vintage Platter Only For Micro Seiki MB-10 Turntable. Previously owned part. Platter removed from Micro Seiki MB-10 belt drive turntable. May fit other Micro Seiki Models.

DQX-1000... ...dieses voll funktionsfähiges Plattenspielerlaufwerk zieht ruhig und souverän seine Runden.... . Die Optik ist sehr gut, an einem Standfuß und auf dem Plattenteller gibt es die üblichen, altersbedingeten Flecken was aber kein Drama ist. ...this fully working turntable turns smoothly and sovereign.... . The optical condition is very good, there is light stain at one feet and the platter due to its age which is no drama. Sorry NO shipment outside EU. fast forward hifi bietet Ihnen folgenden Service:100% funktionsfähige Geräte eine objektive Artikelbeschreibung bei Bedarf werden die Komponenten einer sanften Innenreinigung mit Druckluft unterzogen. Sie erhalten ein staubfreies Gerät alle Geräte werden außen aufwändig gereinigt, sind sofort einsatzbereit und voll wohnzimmertauglichjeder Artikel wird sachgerecht und bruchsicher verpackt diskussionsfreie Rücknahme der Geräte innerhalb von 14 Tagen - siehe hierzu meine AGBs Dies ist ein gewerblicher Verkauf, bitte beachten Sie die AGBs und Ihr Rückgaberecht!

Ohne Aluminiumteller kann der Preis reduziert sein. Relisted item due to cancellation of reservation.Artikel aufgrund Stornierung der Reservierung erneut eingestellt. Micro Seiki BL-10X Belt Drive Auto Lift Up Plattenspieler (1983), 100V Das Kit enthält zwei Matten, Carbon und Aluminium. Ein recht seltenes Exemplar in unserer Gegend. In diesem Zustand kommt es einmal im Jahr vor.Völlig autark, benötigt nichts weiter als die Schallplatte selbst!Das Gerät ist in ausgezeichnetem technischen und optischen Zustand.Völlig geräuschlos. Fantastischer Motor von Micro!Alles funktioniert wie es soll. Alle Tasten funktionieren einwandfrei. Hauptmerkmale dieses Players:- Riemenantrieb- Monolithischer Verbundrahmen- „Einzelradaufhängung“ mit dreifacher Dämpfung (Feder, Gummi, Silikon). Die Nivellierung erfolgt durch Änderung der Federvorspannung.- Elektrischer Tonarmlift, der keinerlei Wartung erfordert.- Automatisches Anheben des Tonarms nach Ende der Schallplatte.- Abnehmbares Tonarmrohr- Der Griff des beweglichen Teils des Tonarms befindet sich nicht entlang des Rohrs, sondern entlang des Tonarmkörpers.- Sehr bequemer Zugang zu allen Komponenten und Platinen durch eine leicht abnehmbare obere Abdeckung. Der Plattenspieler wurde gründlich getestet und gewartet: 1. Ein neuer Riemen. Thakker, hergestellt in Deutschland.2. Das Schmiermittel der Hauptwelle wurde gemäß Benutzerhandbuch durch ein neues ersetzt. 3. Beide Geschwindigkeiten zeigten während des mehrstündigen Tests eine stabile Leistung.4. Die Motoraufhängung hat ihre Elastizität nicht verloren und ist in einwandfreiem Zustand.5. Tonarm überprüft. Alles ist in Ordnung, Antiskating zeigt die richtige Kraft.6. Die Kappe ist in gutem Zustand. Einige kleine Kratzer sind kaum sichtbar.7. Das Kit enthält zwei Matten, Carbon und Aluminium. Ein sehr wenig benutzter Plattenspieler von Micro Seiki aus den 80er Jahren.Der Plattenspieler ist mit allen möglichen Vorsichtsmaßnahmen in einem großen Karton verpackt. Achtung! Die Versorgungsspannung des Spielers beträgt 100 Volt. Versand: nur EUDeutschland: 26,85 Euro EU: 59,80 Euro

This highly regarded and sought after vintage unit features exceptional engineering, minimalist design and incredible sound. Included in the sale are:DDX-1000 turntable with control and power unit, including original operating manualMicro MA-505 MK III Dynamic Balance Tonearm, with original operating and service manualsTonearm MountCardas cable interfaceBlue Point Special EVO III cartridge (very low listening hours)The turntable will be disassembled for shipping: Platter removed and wrapped, control unit wrapped, tonearm packaged in a foam formed box. Cartridge will be removed only at buyers request and packaged separately.

Micro Seiki DDX-1000 with its MD-1000 power supply The record player is in good working order. The aesthetic condition is excellent, just small signs of use and age, please check the photos, they are part of the description. Bases for applying SME arms are included2 Micro AX-2 units1 Micro AX-4 unit Mini LP adapter included Professional packaging included The DDX-1000s three large isolators form a unique absorbent mechanism that not only completely eliminates the risk of external vibration, but also serves to isolate the tonearm from the turntable. Up to three high-quality arms can be mounted simultaneously and the arms are changed quickly and easily. The power supply and transformer are completely isolated in a separate control unit, thus eliminating any feedback or humming interference. These unique design concepts have been extensively researched and tested by our engineers. All manufacturing and assembly steps meet the highest quality standards to produce this ultimate turntable system. The result is certainly that the DDX-1000 is one of the best turntables available, with absolutely excellent mechanical stability and precision. SpecificationsDrive system: direct drive, frequency-controlled DC servo motor Speeds: 33,33 and 45 rpm Dish: 31cm, 2kg aluminum alloy Wow and vibration: less than 0.025% Signal to noise ratio: more than 63db Speed ??adjustment range: +-6% of rated speed Weight: 10kg without control unit Shipping Worldwide available.

This Micro Seiki AX-1 Armboard is a high-quality part for your DQX 1000 turntable. It is designed for precise and reliable performance, ensuring that your vinyl records will sound their best. The brand name Micro Seiki is known for its excellence in audio equipment, and this armboard is no exception.Crafted with precision, this armboard is made to last. It is compatible with a variety of turntables and cartridges, making it a versatile addition to your audio setup. Whether youre a seasoned audiophile or just starting out, this Micro Seiki AX-1 Armboard is a great choice for your DQX 1000 turntable as well as other Micro Seiki turntables that use a pole mount for the armboard. Includes black 3 hole/slits washer. Has some marring from the base plate of a Micro Seiki 505 Tonearm that was mounted on it. Sold as is, an estate sale, no returns, refunds or exchanges.

This Micro Seiki Microsorber Turntable Feet set is a great addition to your record player setup. It is designed to provide a secure and stable base for your turntable, ensuring optimal sound quality. The feet are compatible with universal brands and are made from high-quality materials, making them durable and long-lasting. Whether youre a music enthusiast or a professional audiophile, this turntable feet is a must-have accessory for your record player. It is easy to install and use, and will provide a significant improvement to your listening experience. Get your hands on this Micro Seiki Microsorber Turntable Feet today and take your record listening to the next level! Some marring from previous arm boards that were mounted to it. Sold as is for an estate, no refunds, exchanges or returns.

Vintage Platter Only For Micro Seiki MB-10 Turntable. Previously owned part. Platter removed from Micro Seiki MB-10 belt drive turntable. May fit other Micro Seiki Models.

Micro Seiki XP-10SC, Gerader Arm für Plattenspieler BL-10X (1983), Neu, Dies ist ein neues Produkt, ein originaler gerader Arm für den Micro Seiki BL-10X Plattenspieler.Neben dem Rohr selbst enthält das Kit das Hauptgewicht,das Seitengewicht und die Tonabnehmerschrauben. Versand: nur EUDeutschland: 6,85 Euro EU: 19,80 Euro

This highly regarded and sought after vintage unit features exceptional engineering, minimalist design and incredible sound. Included in the sale are:DDX-1000 turntable with control and power unit, including original operating manualMicro MA-505 MK III Dynamic Balance Tonearm, with original operating and service manualsTonearm MountCardas cable interfaceBlue Point Special EVO III cartridge (very low listening hours)The turntable will be disassembled for shipping: Platter removed and wrapped, control unit wrapped, tonearm packaged in a foam formed box. Cartridge will be removed only at buyers request and packaged separately.

Micro Seiki BL-10X Strait arm (1983), 100V Dies ist ein neues Produkt, ein originaler gerader Arm für den Micro Seiki BL-10X Plattenspieler.Er wird mit Originalfett und -verpackung geliefert.Neben dem Rohr selbst enthält das Kit das Hauptgewicht, das Seitengewicht und die Tonabnehmerbefestigungsschrauben. Versand: nur EUDeutschland: 6,85 Euro EU: 19,80 Euro

Vintage Platter Only For Micro Seiki MB-10 Turntable. Previously owned part. Platter removed from Micro Seiki MB-10 belt drive turntable. May fit other Micro Seiki Models.

Micro Seiki DDX-1000 with its MD-1000 power supply The record player is in good working order. The aesthetic condition is excellent, just small signs of use and age, please check the photos, they are part of the description. Bases for applying SME arms are included2 Micro AX-2 units1 Micro AX-4 unit Mini LP adapter included Professional packaging included The DDX-1000s three large isolators form a unique absorbent mechanism that not only completely eliminates the risk of external vibration, but also serves to isolate the tonearm from the turntable. Up to three high-quality arms can be mounted simultaneously and the arms are changed quickly and easily. The power supply and transformer are completely isolated in a separate control unit, thus eliminating any feedback or humming interference. These unique design concepts have been extensively researched and tested by our engineers. All manufacturing and assembly steps meet the highest quality standards to produce this ultimate turntable system. The result is certainly that the DDX-1000 is one of the best turntables available, with absolutely excellent mechanical stability and precision. SpecificationsDrive system: direct drive, frequency-controlled DC servo motor Speeds: 33,33 and 45 rpm Dish: 31cm, 2kg aluminum alloy Wow and vibration: less than 0.025% Signal to noise ratio: more than 63db Speed ??adjustment range: +-6% of rated speed Weight: 10kg without control unit Shipping Worldwide available.

Micro Seiki BL-10X Belt Drive Auto Lift Up Plattenspieler (1983), 100VDas Kit enthält zwei Matten, Carbon und Aluminium. Ein recht seltenes Exemplar in unserer Gegend. In diesem Zustand kommt es einmal im Jahr vor.Völlig autark, benötigt nichts weiter als die Schallplatte selbst!Das Gerät ist in ausgezeichnetem technischen und optischen Zustand.Völlig geräuschlos. Fantastischer Motor von Micro!Alles funktioniert wie es soll. Alle Tasten funktionieren einwandfrei. Hauptmerkmale dieses Players:- Riemenantrieb- Monolithischer Verbundrahmen- „Einzelradaufhängung“ mit dreifacher Dämpfung (Feder, Gummi, Silikon). Die Nivellierung erfolgt durch Änderung der Federvorspannung.- Elektrischer Tonarmlift, der keinerlei Wartung erfordert.- Automatisches Anheben des Tonarms nach Ende der Schallplatte.- Abnehmbares Tonarmrohr- Der Griff des beweglichen Teils des Tonarms befindet sich nicht entlang des Rohrs, sondern entlang des Tonarmkörpers.- Sehr bequemer Zugang zu allen Komponenten und Platinen durch eine leicht abnehmbare obere Abdeckung. Der Plattenspieler wurde gründlich getestet und gewartet: 1. Ein neuer Riemen. Thakker, hergestellt in Deutschland.2. Das Schmiermittel der Hauptwelle wurde gemäß Benutzerhandbuch durch ein neues ersetzt. 3. Beide Geschwindigkeiten zeigten während des mehrstündigen Tests eine stabile Leistung.4. Die Motoraufhängung hat ihre Elastizität nicht verloren und ist in einwandfreiem Zustand.5. Tonarm überprüft. Alles ist in Ordnung, Antiskating zeigt die richtige Kraft.6. Die Kappe ist in gutem Zustand. Einige kleine Kratzer sind kaum sichtbar.7. Das Kit enthält zwei Matten, Carbon und Aluminium. Ein sehr wenig benutzter Plattenspieler von Micro Seiki aus den 80er Jahren.Der Plattenspieler ist mit allen möglichen Vorsichtsmaßnahmen in einem großen Karton verpackt. Achtung!Die Versorgungsspannung des Spielers beträgt 100 Volt. Versand: nur EUDeutschland: 26,85 Euro EU: 59,80 Euro

Micro Seiki BL-10X Strait arm (1983), 100V Dies ist ein neues Produkt, ein originaler gerader Arm für den Micro Seiki BL-10X Plattenspieler.Er wird mit Originalfett und -verpackung geliefert.Neben dem Rohr selbst enthält das Kit das Hauptgewicht, das Seitengewicht und die Tonabnehmerbefestigungsschrauben. Versand: nur EUDeutschland: 6,85 Euro EU: 19,80 Euro

This is a reprint of an original Review from 1977. An amazing turntable, capable of having 3 tonearms mounted on it! One of the first ESOTERIC audio components, the high end was born here! A piece of Audio History! This review has a full test of the product, full specs, and commentary. I have many more PSB Ads and Reviews on my Ebay Store. THANKS! -Each Page is 8.5 by 11 -Shipping is $3 in the USA and $6 ANYWHERE else, I ship WORLDWIDE! Each additional item is only $1 more to ship! -As always, your satisfaction is GUARANTEED at Electronics Archives! If you are unhappy with any purchase, email and I will get you a resolution or a refund! -Email me with any questions, I put 10-20 new Ads and Brochures on my site EVERY DAY! THANK YOU! Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

This highly regarded and sought after vintage unit features exceptional engineering, minimalist design and incredible sound. Included in the sale are:DDX-1000 turntable with control and power unit, including original operating manualMicro MA-505 MK III Dynamic Balance Tonearm, with original operating and service manualsTonearm MountCardas cable interfaceBlue Point Special EVO III cartridge (very low listening hours)The turntable will be disassembled for shipping: Platter removed and wrapped, control unit wrapped, tonearm packaged in a foam formed box. Cartridge will be removed only at buyers request and packaged separately.

Vintage Platter Only For Micro Seiki MB-10 Turntable. Previously owned part. Platter removed from Micro Seiki MB-10 belt drive turntable. May fit other Micro Seiki Models.

Micro Seiki MA 100S Tonearm For Turntable Cartridge. Parts Or Fix The bearing needs attention. There is a TINY bit of play. It might need Tightening. I can’t get the bearing screw off and will leave this to an expert. The bias guide rod is missing Continuity is good. Pretty clean and will look even better after a proper polish I did not do a deep clean. No cable These are fantastic Tonearms when brought up to spec and super super rare Sold as seen.

This is a reprint of an original Review from 1977. An amazing turntable, capable of having 3 tonearms mounted on it! One of the first ESOTERIC audio components, the high end was born here! A piece of Audio History! This review has a full test of the product, full specs, and commentary. I have many more PSB Ads and Reviews on my Ebay Store. THANKS! -Each Page is 8.5 by 11 -Shipping is $3 in the USA and $6 ANYWHERE else, I ship WORLDWIDE! Each additional item is only $1 more to ship! -As always, your satisfaction is GUARANTEED at Electronics Archives! If you are unhappy with any purchase, email and I will get you a resolution or a refund! -Email me with any questions, I put 10-20 new Ads and Brochures on my site EVERY DAY! THANK YOU! Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Micro Seiki MA 100S Tonearm For Turntable Cartridge. Parts Or Fix The bearing needs attention. There is a TINY bit of play. It might need Tightening. I can’t get the bearing screw off and will leave this to an expert. The bias guide rod is missing Continuity is good. Pretty clean and will look even better after a proper polish I did not do a deep clean. No cable These are fantastic Tonearms when brought up to spec and super super rare Sold as seen.