????Including & Condition Details: As shown in photos. ????Shipping: FedEx ?Product ContentsMICRO C-91 Dust CoverExternal Dimensions: Width 522 x Height 100 x Depth 407mmThickness: Approx. 4mm ?ConditionThere is no noticeable damage and it is transparent. ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

????Including & Condition Details: As shown in photos. ????Shipping: FedEx ?ConditionEach part has been polished/cleaned. The dust cover is polished with a special abrasive depending on the level of scratches, and the finish is polished to enhance transparency. The platter and metal parts are polished to remove dirt and rust as much as possible until they are as clean as possible. Dust cover/button, plate part/suction platter ?The cover is clear and beautiful with no noticeable scratches. ?The buttons and plates are also glossy and in good condition. ?The arm base also has minor scratches and no noticeable damage. ?The suction platter is also shiny, and there are no tears or deterioration in the rubber part, but there are a few scratches near the center of the top surface. Cabinet ?There is no major damage and it is shiny and beautiful. ?All four insulators are functioning, and the hinges are not damaged and can be kept open. Air Pump Unit ?There are no noticeable scratches overall. The tubes are soft and have no tears. Overall, it is in beautiful condition. Considering the aging, we judge it to be in good condition. ?We have performed comprehensive maintenance at our company for this sale. We replaced consumable electronic parts (electrolytic capacitors, etc.) and adjusted each part. It is in a condition that you can use with confidence. Turntable It works well, rotates normally, and you can switch between 33 and 45 revolutions/adjust the speed. The rotation stability has been confirmed with the attached stroboscope. ?There is no problem with the start/stop button response. ?There is no problem with the light turning on. *This item is common to 50/60Hz. Air Pump Unit It works well, connect the tube to the turntable and press the SUCTION button to adsorb the record normally. There are no problems with all of the above operations, and it is in good working order. ?Product Details Manufacturer: MICROModel Number: BL-99VFIIAir Pump Unit: RP-99V A-1201 base compatible tonearm ?MICRO MA-505, 505S, 505X, MA-707X ?AUDIO CRAFT AC-300MKII ?SAEC WE-407/23 ?Accessories ?Dust cover ?Rubber belt ?Instruction manual (copy ?For BL-99V.) ?Arm base (MICRO A-1201 Hole diameter: approx. 28mm) ?Disc pad for suction (This is the item that holds the record and suctions) ?Earth wire (approx. 1m) ?Stroboscope (MICRO) ?Transport screw for the Air Pump Unit(The transport screw will be attached when shipping. Please remove the red screw on the bottom of the pump before use.) ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

------------ Operation------------Comprehensive maintenance has been performed at our company for this sale.We have replaced consumable electronic parts (electrolytic capacitors, etc.) and adjusted each part.It is in good condition for safe use. Good operation The turntable rotates normally and can be switched between 33 and 45 rpm and the speed can be adjusted. The rotational stability has been confirmed with the attached stroboscope. The start/stop button response is also fine. No problem with start/stop button response and light illumination. ?Air pump works fine. Connect the tube to the turntable. When the tube is connected to the turntable and the SUCTION button is pressed, the record disc is adsorbed normally

Description MICRO BL-99VFII Pump RP-99V Suction Type Arm Base A-1201 MICRO BL-99VFII RP-99V Adsorption type turntable base A-1201/Transportation screws etc. included The BL-99VFII, which is an improved version of the BL-99VF (BL-99V+fidelity-research FR-64fx), has the same functionality as the turntable, but the tone arm has been improved. It was released at the time with the FR-64fxMKII installed as a genuine model. This time, it will be exhibited in armless specification. This player is equipped with a heavy turntable and record suction function. Condition: Each part has been polished/cleaned. Depending on the level of scratches, the dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polish the platter and metal parts until they are as clean as possible to remove dirt and rust. -The cover is clear and clean with no noticeable scratches. -The buttons and plates are also shiny and in good condition. -The arm base has only minor scratches and no noticeable damage. ?The suction platter is also glossy, and there are no signs of wear or deterioration on the rubber part. There are a few scratches near the center of the top. ?There are no major scratches and it is shiny and beautiful. ?All four insulators are functioning, The hinge also remains open without damage. ?There are no noticeable scratches overall. The tube is soft and has no fraying. It is in absolutely beautiful condition. Considering its age, we consider it to be in good condition. This is a used item that has been around for a number of years. Please be aware of the scratches/scratches/feelings due to age/use before bidding. The criteria for judging the condition check column is Our staff makes selections based on certain standards of our company, which handles vintage audio. There are individual differences in how the condition is perceived, so there may be differences from the customers standards. Please check the images carefully and make your decision. Please feel free to contact us if you have any questions regarding the condition. ?Operation To confirm operation, we perform aging for half a day to one day. For this sale, we are conducting comprehensive maintenance. We replaced consumable electronic parts (electrolytic capacitors, etc.) and made adjustments to each part. It is in a condition that you can use it with confidence. Good operation - Rotates normally and can be switched between 33 and 45 rotations/adjusted speed. The stability of rotation has also been confirmed using the included stroboscope. ?There is no problem with the start/stop button response. - There is no problem with the light turning on. *This item is common for 50/60Hz. Works well ?Connect the tube to the turntable Press the SUCTION button to suction the record normally. There are no problems with all of the above operations, and the product is in good working order. ?Product contents Manufacturer: MICRO Turntable model number: BL-99VFII Pump unit model number: RP-99V ?MICRO MA-505, 505S, 505X, MA-707X ?AUDIO CRAFT AC-300MKII ?SAEC WE-407/23 ?Accessories ?Dust cover ?Rubber belt ?Instruction manual (copy *For BL-99V.) ?Arm base (MICRO A-1201 hole diameter: approx. 28mm) ?Suction disc pad This is an item that holds and suctions the record. ?Earth wire (approx. 1m) ?Stroboscope (MICRO) ?Transport screw for pump unit When shipping, we will attach transportation screws. Please remove the red screw on the bottom of the pump before use. *All items shown in the photo other than our equipment in the background are included. Please check. If you have any question or concern, please do not hesitate to contact me. Thank you for visiting. Please Note for International Buyers We ship items from Japan. Import duties, taxes (example VAT, GST), and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check in advance about those additional costs in your customs office before buying. Generally, those additional costs will be charged by the carrier when you receive the item. We write the customs declaration correctly. No undervalue. No checkmark gift. Click here and go to my listings!

MICRO SEIKI MSB-100 Audio Shock Absorber 4pcs Our price is 100% negotiable!Please make an offer and we will give you the best price! Payment PayPal ONLY.Please pay within 5 days after auction is finished. Shipping We ONLY ship to buyers Paypal registered address. Please Note International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior.

MICRO SEIKI BL-99V FII Turntable RP-99V Air Pump Unit A-1201 Arm Base Set Used DescriptionOperation has been checked. PaymentPlease pay within 3days after your purchase.Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 3-7 business days. (except for Saturday, Sunday and national holiday in JAPAN ) Weekends are not available because FedEx or DHL are closedInternational Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

????PRODUCTS???? Product Details Manufacturer: MICRO Turntable Model: BL-99VFII Pump Unit Model: RP-99V < Tonearms Compatible with A-1201 Base >MICRO: MA-505, 505S, 505X, MA-707XAUDIO CRAFT: AC-300MKIISAEC: WE-407/23 AccessoriesDust CoverRubber BeltUser Manual (Copy, for BL-99V)JapaneseArm Base (MICRO A-1201, Hole Diameter: Approx. 28 mm (1.1 in))Vacuum Disc Pad (Used to hold records securely during vacuum operation.)Ground Wire (Approx. 1 m (39.4 in))Stroboscope (MICRO)Transport Screws for Pump Unit The pump unit will be shipped with transport screws installed. Before use, please remove the red screws located on the bottom of the pump. MICRO BL-99VFII RP-99V Vacuum Turntable with Base A-1201 The BL-99VFII is an improved version of the BL-99VF (BL-99V + Fidelity-Research FR-64fx). While retaining the functionality of the original turntable, the tonearm has been significantly upgraded, with the FR-64fxMKII originally mounted at the time of release. This listing is offered as an arm-less version, featuring a heavy-duty turntable with a record vacuum function for improved playback performance.Condition General: All parts have been polished and cleaned. Dust Cover / Buttons, Plate Section / Vacuum Platter:Dust Cover: Polished with a specialized compound to enhance clarity and gloss. No noticeable scratches; it is clean and transparent.Buttons & Plate: Retain their luster and are in excellent condition.Arm Base: Only minor scuffs, with no significant damage visible.Vacuum Platter: Glossy with no tears or deterioration on the rubber parts, though there are a few minor scuffs near the center of the surface. Cabinet:No significant damage; retains its gloss and is visually appealing.All four insulators function properly, and the hinges remain intact, holding the cover open. Air Pump:No noticeable scratches or damage.The tube is soft and undamaged.Operation The unit underwent aging tests for half a day to a full day to ensure functionality. Electronic components, such as electrolytic capacitors, have been replaced, and all parts have been adjusted for optimal performance. Turntable: Fully FunctionalOperates smoothly, with stable rotation at both 33 and 45 RPM, confirmed with the included stroboscope.The Start/Stop buttons are responsive.All lights are operational. Air Pump: Fully FunctionalWhen the tube is connected and the SUCTION button is pressed, records adhere to the platter as expected. The item supports both 50Hz and 60Hz frequencies. This turntable is fully operational, with all features tested and confirmed to work properly. It has been restored and maintained to provide a reliable and premium experience. ????PAYMENTS???? We accept PayPal and all major Debit / Credit Cards. We can only ship your item after your payment clears. We ship within 10 days of payment.????CHECKOUT???? Please check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed.????SHIPPING???? Packages:Box and Bubblerup Packages usually leave our warehouse within 10 days of payment. Weekend orders will ship on Monday or Tuesday. We provide valid Tracking Numbers for all orders.????International Packages:???? We ship to all US Territories, Europe and Asia and Middle East and Australia and Canada including Guam and Hawaii. All our international packages ship under the Fedex and Japan Post.????CUSTOMER SERVICE???? If you have any questions or issues, we are at your service. You can email us anytime through eBay messages.????RETURN INFORMATION???? We offer a standard FREE 30 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund.????Customs duty???? Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. We will reply to your question or invoice within 3 days. We cant not reply gifts or unreasonable requests such as declared amount.

MICRO SEIKI BL-99V FII Turntable RP-99V Air Pump Unit A-1201 Arm Base Set Japan Description Condition: Used Each part has been polished/cleaned.The dust cover is polished with a special abrasive depending on the level of scratches, and the finish is polished to enhance transparency. The platter and metal parts are polished to remove dirt and rust as much as possible until they are as clean as possible. Dust cover/button, plate part/suction platter?The cover is clear and beautiful with no noticeable scratches.?The buttons and plates are also glossy and in good condition.?The arm base also has minor scratches and no noticeable damage.?The suction platter is also shiny, and there are no tears or deterioration in the rubber part, but there are a few scratches near the center of the top surface.Cabinet?There is no major damage and it is shiny and beautiful.?All four insulators are functioning, and the hinges are not damaged and can be kept open.Air Pump Unit?There are no noticeable scratches overall. The tubes are soft and have no tears.Overall, it is in beautiful condition.Considering the aging, we judge it to be in good condition.?We have performed comprehensive maintenance at our company for this sale. We replaced consumable electronic parts (electrolytic capacitors, etc.) and adjusted each part. It is in a condition that you can use with confidence. TurntableIt works well, rotates normally, and you can switch between 33 and 45 revolutions/adjust the speed. The rotation stability has been confirmed with the attached stroboscope.?There is no problem with the start/stop button response.?There is no problem with the light turning on.*This item is common to 50/60Hz. Air Pump UnitIt works well, connect the tube to the turntable and press the SUCTION button to adsorb the record normally. There are no problems with all of the above operations, and it is in good working order.?Product DetailsManufacturer: MICROModel Number: BL-99VFIIAir Pump Unit: RP-99V A-1201 base compatible tonearm?MICRO MA-505, 505S, 505X, MA-707X?AUDIO CRAFT AC-300MKII?SAEC WE-407/23 ?Accessories?Dust cover?Rubber belt?Instruction manual (copy ?For BL-99V.)?Arm base (MICRO A-1201 Hole diameter: approx. 28mm)?Disc pad for suction (This is the item that holds the record and suctions)?Earth wire (approx. 1m)?Stroboscope (MICRO)?Transport screw for the Air Pump Unit(The transport screw will be attached when shipping. Please remove the red screw on the bottom of the pump before use.) Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

MICRO hinge pair for BL-91 BL-99V SX-111FV etc. compatible Tested Works well F/SDescriptionUsed ; It has been confirmed to work. There are some small scratches due to age-related use, but it is generally in very good condition. In good working condition Shipping Standard Shipping(Japan Post,FedEx,DHL) The package will arrive 5-14days after shipment.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

????PRODUCTS???? This is a used MICRO record player BL-99VF. Disc Attachment Method Belt drive Fidelity Research FR-64fx tone arm DENON cartridge “DL-103”, Ortofon phono cable Year: 1984 Accessories ?Air pump unit “BP-99V”, EP adapter, overhang gauge The item can still be used, although there are some scratches, scuffs, and stains in prominent parts and places, and the condition of the material itself has deteriorated.????PAYMENTS???? We accept PayPal and all major Debit / Credit Cards. We can only ship your item after your payment clears. We ship within 10 days of payment.????CHECKOUT???? Please check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed.????SHIPPING???? Packages:Box and Bubblerup Packages usually leave our warehouse within 10 days of payment. Weekend orders will ship on Monday or Tuesday. We provide valid Tracking Numbers for all orders.????International Packages???? We ship to all US Territories, Europe and Asia and Middle East and Australia and Canada including Guam and Hawaii. All our international packages ship under the Fedex and Japan Post.????CUSTOMER SERVICE???? If you have any questions or issues, we are at your service. You can email us anytime through eBay messages.????RETURN INFORMATION???? We offer a standard FREE 30 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund.????Customs duty???? Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. We will reply to your question or invoice within 3 days. We cant not reply gifts or unreasonable requests such as declared amount.

MICRO Compatible with BL-91, BL-99V, SX-111FV hinge pair rare Tested good F/S DescriptionUsed ; It has been confirmed to work. There are some small scratches due to age-related use, but it is generally in very good condition. It has been confirmed to work. There are some small scratches due to age-related use, but it is generally in very good condition. Shipping Standard Shipping(Japan Post,FedEx,DHL) The package will arrive 5-14days after shipment.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

MICRO SEIKI BL-99V Analog Turntable Fidelity Research FR-54 Tonearm Input Voltage : 100V Our price is 100% negotiable! The price just means ASK!Please make an offer and we will give you the best price! Attention Buyers!! The voltage for this electronic device is 100V and made for Japan use ONLY. We are not responsible for the damage of this device if you use it without a proper transformer. Payment PayPal ONLY.Please pay within 5 days after auction is finished. Shipping DHL shipping We ONLY ship to buyers Paypal registered address. Please Note International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior.

????Including & Condition Details: As shown in photos. ????Shipping: FedEx MICRO SEIKI BL-99V RP-99V Adsorption Type Turntable with A-1201 Arm Base, Transportation Screws ..etc. The belt drive player BL-99V was released by Micro Seiki around 1983. This player is equipped with a heavy turntable and record suction function. BL stands for belt drive and V stands for vacuum. Even now, it has gained considerable recognition as a popular brand not only in Japan but also overseas. It is no exaggeration to say that Micro Seikis ultra-precision processing technology is the pride of Japan. ?ConditionEach part has been polished/cleaned. The dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polished the platter and metal parts until they were as clean as possible to remove dirt and rust. Dust cover/button, plate part/adsorption platter - The cover is transparent and clean with no noticeable scratches. ?Buttons, plates, and suction platters are also glossy/glossy and in good condition. ?There is no wear or deterioration on the suction rubber part.?The arm base has no noticeable damage other than some scratches from arm installation. Cabinet?The entire cabinet is shiny and beautiful.?All four insulators are functioning, and the hinges remain open without damage. Air pump- There is no noticeable damage such as scratches or dents, and it is glossy. There are no signs of wear or tear on the tube. It is in absolutely beautiful condition. Considering its age, we consider it to be in very good condition. ?We perform aging for half a day to one day to confirm the operation.For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. TurntableWorks well, rotates normally, and can switch between 33 and 45 rotations/adjust speed. The stability of rotation has also been confirmed using the included stroboscope.?There is no problem with the start/stop button response.- There is no problem with the light turning on.*This item is common for 50/60Hz. Air pumpWorks well - When you connect the tube to the turntable and press the SUCTION button, the record will be suctioned normally. There are no problems with all of the above operations, and the product is in good working order. ?Product contentsManufacturer: MICROturntable Model number: BL-99VDimensions W530 x H200 x D420 (mm)Weight: 17.45kg Pump unit model number: RP-99VDimensions: W175 x H120 x D295 (mm)Weight: 3kg A-1201 Base compatible tonearm:?MICRO MA-505, 505S, 505X, MA-707X?AUDIO CRAFT AC-300MKII?SAEC WE-407/23 ?Accessories?Dust cover?Rubber belt?Instruction manual (original)?Arm base ( MICRO A-1201 hole diameter: approx. 28mm)?suction disc pad (this is an item that holds down the record and suctions it)?earth wire (approx. 1m)?stroboscope (MICRO)?transportation screw for pump unit shipped (We will attach the transportation screws and ship the item). Please remove the red screw on the bottom of the pump before use. ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Item TitleN7018 Good Appearance Compatible With Micro Bl-91 Bl-99V Sx-111Fv Etc. Hinge Pai Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

MICRO SEIKI BL-99V DescriptionMicro Seiki introduced the BL-99V belt drive player around 1983.This player has a heavy turntable and record suction function.BL stands for belt drive and V for vacuum.It is no exaggeration to say that Micro Seikis ultra-precision processing technology is the pride of Japan.Manufacturer: MICRO, Turntable model number: BL-99V, Dimensions W530 x H200 x D420 (mm), Weight: 17.45 kgPump unit model number: RP-99V, dimensions: W175 x H120 x D295 (mm), weight: 3 kgA-1201 base compatible tone arm: MICRO MA-505, 505S, 505X, MA-707X, AUDIO CRAFT AC-300MKII, SAEC WE-407/23 Operation checkWe have performed total maintenance and operation checks for this exhibit.We have measured electronic parts, lubricated spindle oil, cleaned each contact point, and adjusted each part.It is in good condition for safe use.The turntable rotates normally and can be switched between 33 and 45 rpm and the speed can be adjusted.The rotational stability has been confirmed with the included stroboscope.The start/stop button response is also fine.No problem with start/stop button response and light illumination.Connect the tube to the turntable.When the tube is connected to the turntable and the SUCTION button is pressed, the record disc is adsorbed normally.All of the above are in good working order.If you find any defects after arrival, please feel free to contact us for a free return. Please contact us for a free return policy (limited to 30 days after delivery). AccessoryDust coverRubber beltInstruction Manual (original)Arm base (MICRO A-1201, hole diameter: approx. 28mm)Disc pad for adsorption (This item is used to hold the record disc and adsorb it.)Ground wire (approx. 1m)Stroboscope (MICRO)Transport screws for pump unitThe pump unit will be shipped with the transport screws attached.Please remove the red screw on the bottom of the pump before use. PackagingWhen exporting overseas, we will ship the product in reinforced cardboard boxes to prevent damage during transportation. If the product comes with its original box, we will ship it with the original box protected. PrecautionsWhen using the product, please check the voltage supported by the product and the voltage in your area carefully. If the voltage is different from the product specifications, not only will the product not function properly, it may also damage the equipment. About Handling TimeShips within 5 business day.Please note that Saturdays, Sundays, and holidays do not count as business days. About Shipping PolicyWe ship via FedEx, DHL or Japan Post. International Buyers - Please Note:Duties, taxes, and fees are not included in the product price or shipping cost. You are responsible for paying any duties, taxes, or fees that may be incurred when importing products into your country. We also recommend that you check with your customs office in advance of your purchase to determine how much these additional costs will be.

Micro Seiki BL-99V Turntable Record Player Platter Pump. It works properly. It needs to be placed flat to work optimally because it is suspended with springs internally to dampen vibrations Tested and has suction.

Micro Seiki BL-99V Turntable Record Player Platter And Bearing. Pump Compatible Spins true and free.

Micro Seiki BL-99V Turntable Record Player feet.

Micro Seiki BL-99V Turntable Record Player feet.

Micro Seiki BL-99V Turntable Plinth Motor & Pump & Electronics. Pump Compatible All electronics worked before it was parted out. Plinth has a dent and that’s the reason it was returned to me. ThIS IS A 100 volt unit. You will need a step town transformer or variac.

MICRO SEIKI MSB-100 Audio Shock Absorber Weight Capacity : 8kg per unit / 32kg / 4 units Our price is 100% negotiable! The price just means ASK!Please make an offer and we will give you the best price! Payment PayPal ONLY.Please pay within 5 days after auction is finished. Shipping We ONLY ship to buyers Paypal registered address. Please Note International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior.

Micro Seiki BL-99V Turntable Record Player feet.

Micro Seiki BL-99V Turntable Record Player. 100 Volts. The table powers up It keeps Speed The belt is not original The motor cover is missing The suction pump works but there is some movement inside. As if the motor glue has come loose. It only matters when you move it once placed down there are no problems The dust cover has cracks. Sold as is. It may have other issues that I have not noticed.