????Including & Condition Details: As shown in photos. ????Shipping: FedEx This is a suction specification that incorporates the suction modification kit “MK-91V”?exclusively for BL-91. It looks and feels heavy, and the arms can be rearranged to your liking, so you can enjoy it in a wide variety of ways. ?ConditionEach part has been polished/cleaned.The dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polished the platter and metal parts until they were as clean as possible to remove dirt and rust. Dust cover, operation plate section, platter, and rubber mat- There are no noticeable scratches on the cover and it is transparent and clean.?The operation plate/valve part is also in very good condition.?The suction platter is also shiny with no major damage.?The suction rubber is soft with no tears or deterioration.?The arm base is also glossy. Cabinet?The cabinet is glossy overall and there is no noticeable damage.?Hinges also remain open without damage.?The rubber inside the insulator has some wear due to aging, but it has not hardened and is elastic and functions without problems. Pump unit- The front sheet on the right side of the button panel is slightly offset. There is no other major damage, and it is shiny and in good condition. Overall condition is very good. Considering its age, we judge it to be a very good product. ?We perform aging for half a day to one day to confirm the operation.For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. Turntable?Works well, rotates normally, and can switch between 33 and 45 rotations/adjust speed. The stable rotation has also been confirmed using a stroboscope.?The pulley operates normally using the ON/OFF knob.?There is no problem with the light turning on.*This item is common for 50/60Hz. Pump/Valve Parts?Works well- When you connect the tube to the pump unit, press the POWER button, and turn on the valve dial, the record will be suctioned normally.- There is no problem with the light turning on. There are no problems with all of the above operations, and the product is in good working order. ?Product ContentsManufacturer: MICROModel number: BL-91Dimensions: Width 532 x Height 175 x Depth 440mmTonearms compatible with A-1201 base: MICRO MA-505, 505S, 505X, 707X AUDIO CRAFT AC-300MKII, AC-300A Technics EPA-99..etc ?Accessories?Dust cover?Rubber belt?Platter (RT-2000VA)?Spindle (S-1500V / installed)?Valve parts (MK-91V / installed)?Pump unit (RV-1090)?Arm Base (MICRO A1201 hole diameter: approx. 28mm)?instruction manual (copy for BL-91)?instruction manual (copy for MK-91V)?transportation screw x 3 (When shipped, transportation screws will be attached. Please remove it before use.) ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

????Including & Condition Details: As shown in photos. ????Shipping: FedEx ?ConditionEach part has been polished/cleaned.Depending on the level of scratches, the dust cover is polished with a special abrasive and the finish is polished to enhance transparency. Polished the platter and metal parts until they were as clean as possible to remove dirt and rust. Dust cover/Operation plate section/Platter/Rubber mat?There is no major damage and it is transparent and clean.?The rubber mat is soft and shows no signs of deterioration or warping.?The platter/arm base/operation plate part is also in very good condition.?The lettering on the control plate shows slight fading in two places. Cabinet?There is some light fading and a few scratches/scratches due to age, but overall there are no major scratches and the cabinet is in a glossy condition.?Hinges also remain open without damage.?The internal rubber of the insulator has some deterioration and wear, but it is elastic and is currently functioning without any problems. ?We perform aging for half a day to one day to confirm the operation.For this listing, we have carried out a comprehensive maintenance/operation check at our company. We measured electronic parts, applied spindle oil, cleaned each contact, and adjusted each part. It is in a condition that you can use it with confidence. TurntableWorks well, rotates normally, and can switch between 33 and 45 rotations/adjust speed.?The stable rotation has also been confirmed using a stroboscope.?The pulley operates normally using the ON/OFF knob.?There is no problem with the light turning on.*This item is common for 50/60Hz.There are no problems with all of the above operations, and the product is in very good working order. ?Product ContentsManufacturer: MICROModel number: BL-91Dimensions: Width 532 x Height 175 x Depth 440mm Tonearm compatible with A-1201 base:?MICRO MA-505, 505S, 505X, MA-707X?AUDIO CRAFT AC-300MKII?SAEC WE-407/23 ?Accessories?Dust cover?Rubber mat?Rubber belt?Platter?Arm base (MICRO A1201 hole diameter: approx. 28mm)?Instruction manual (copy)?Transportation screw x 3 (Attach the transportation screw when shipping We will ship it to you. Please remove the 3 red screws under the operation panel before use.) ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

????Including & Condition Details: As shown in photos. ?Operation We installed it on our MICRO record player and confirmed that the platter rotates smoothly without any abnormal noise. There is no problem with the operation. ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

DescriptionThank you for your watching our products! We have carefully selected products. We deliver quality products at lower prices, carefully, and quickly. This is our mission.Please NotePlease refrain from the bid of a nervous person. Please click the photo to enlarge, check each photos very carefully for condition details.International BuyersImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Other information a seller may wish to include: These charges are normally collected by the delivering freight(shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts? US and International government regulations prohibit such behavior.ShippingItems will be shipped from Japan by FedEx. All shipping method has tracking number. Usually ship it within 3 to 10 business days. (Saturdays,Sundays and holidays are not included.) Additional shipping charges apply for deliveries to remote area.ContactsPlease contact us by eBay message. If you have any problem or question,Please contact to us ASAP.

MICRO S-1500 Adsorption Suction Shaft Assembly for BL-91 RX-3000 w/washer & nut Description Condition: Used There is some metal dullness, butThere are no major scratches and it looks shiny.Attach to MICRO record playerWe confirmed that the platter rotates smoothly without any abnormal noise.There is no problem with operation. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

.Record player MICRO BL-91MA-505X Serviced Outer Drive Type JAPAN JP. Drive system Belt drive Rotational Speed 33/45 rotation Stylus pressure adjustment range Stylus pressure: 0-3g Tone arm type Dynamic balance type Included cartridge No cartridge Compatible cartridges: 13.5 to 19.5 g Maintenance completed in June 2023 There are cracks in the cabinet paint and scratches and dirt on the dust cover. Mow Motor Law NIPPON NOTESPlease check the Photo.We will answer your questions promptly.Feel free to !!You can add multiple products to the cart and set them to be included. Please contact !{!!!}All the products we handle are products released in Japan. Make sure you can play with the playback device you have. PAYMENT POLICY Within 96 hours after purchase and successful bid. We ships from Japan this product.Import duties,taxes,and charges are not included in the item price or shipping cost.please note that tariffs may be higher in some countries.These caharges are the Buyers responsibillity.please check with your countrys customs office to detemine what these additional costs will be prior to bidding or buying.We do not mark merchandise values below value or mark items as giftsWe will declare the price of the unit, excluding shipping.SHIPPING POLICY Handling Time : 10 business days after payment Shipping Method : FedEX Express Shipping Duration : 13-20 Days Cost : 0$ RETURN POLICY You can return in 60 days. Return cost will be Sellers responsibility. CONTACT DETAILS We will always try to solve problem so please contact us before you open a case.

Item TitleN7018 Good Appearance Compatible With Micro Bl-91 Bl-99V Sx-111Fv Etc. Hinge Pai Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

Item TitleN7755 Micro Bl-91 Turntable Dedicated Control Panel Plate With Fixing Screws Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

DescriptionAll items are shown in the pictures. If you cannot tell from the pictures please contact us. Due to differences in region codes some games CDs DVDs etc. may not ?be available. The voltage of some electrical products may be different. Please make sure to check before purchasing. PaymentPlease pay within 2 days of winning the auction. Shipping There have been delays in delivery due to the global pandemic. There may be a significant delay in the scheduled delivery date. Delivery Time Economy delivery? 3 to 4 weeks (Tracking numbers are not reflected in Australia Canada and some regions.) Standard delivery 2 to 3 weeks Terms of Sale If payment is not confirmed within 2 days of purchase the order will be cancelled. Returns are accepted within 60 days.International Buyers - Please Note: Import duties and taxes are not included in the item price or shipping cost. Please check with your countrys customs office for additional costs before bidding or purchasing. Duties and taxes are not collected by the shipping company. Please check with your countrys customs office for additional costs before bidding or purchasing. The act of declaring goods at a lower value or declaring goods as gifts is prohibited by international governments.

MICRO SEIKI BL-91 Turntable w/ A1202 Arm Base Dust Cover Excellent Japan Description Condition: Used MICRO SEIKI BL-91 Turntable with Arm Base A1202/rubber belt/transport screws ..etc.?ConditionEach part has been polished/cleaned.The dust cover is polished with a special abrasive depending on the level of scratches, and the finish is polished to enhance transparency. The platter and metal parts are polished to remove dirt and rust as much as possible.Dust cover/operation plate part/platter/rubber mat?The cover is clean and transparent with no major scratches.?The platter/arm base/operation plate parts are also in good condition.?The rubber mat is also soft and has no deterioration or warping.Cabinet- There are a few dotted linear marks on the top surface, but overall there is no major damage and it is shiny.- The hinges remain open without any damage.- The rubber inside the insulator is also elastic and functions without any problems.Overall it is in good condition. Considering the age, we judge it to be a good product.We have carried out a total maintenance/operation check in preparation for this listing. We measured the electronic parts/lubricated the spindle with oil/cleaned each contact and adjusted each part. It is in a condition that you can use with confidence.TurntableWorks well, rotates normally, and can be switched between 33 and 45 rpm/adjusted. The stable rotation has been confirmed with a stroboscope.- The pulley operates normally with the ON/OFF knob.- There is no problem with the light turning on.*This item is common to 50/60Hz.There are no problems with the above operations and it works well.?Product DetailsManufacturer: MICROModel Number: BL-91Dimensions : Width 532 x Height 175 x Depth 440mmA-1202 Arm Base compatible Tonearm:?SAEC WE-308, WE-308SX, WE-317?Accessories?Dust cover?Rubber mat (MICRO DISK-SE 22M)?Rubber belt?Stroboscope (MICRO MST-105)?Platter?Arm base (MICRO A1202 hole diameter: approx. 28mm)?Instruction manual (original)?Transport screws x 3 (The transport screws will be attached when shipped. Please remove the three red screws under the operation panel before use.) Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

MICRO SEIKI S-1500 Shaft Assembly for BL-91 Tested Works well from Japan F/S DescriptionUsed ; It has been confirmed to work. It is in very good condition with no noticeable scratches or stains. Manufacturer?MICROModel Number?S-1500 This shaft assembly is used for the 1500 series, some BL series/RX series, etc. Shipping Standard Shipping(Japan Post,FedEx) The package will arrive 5-14days after shipment.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Product Details Brand: MICRO SEIKI Model: BL-91 MPN: N/A Serial Number: 9020218 Size (L×H×D): 17.5 x 43 x 44 cm Weight: 16,000g Bundle Item: N/A Country of Manufacture: Japan Condition Functionality: Does not work Appearance: Scratches, Stain, Cover is broken see the photo Condition Rank Brand New Brand new, never been used Mint Pre-owned, like new Near Mint Pre-owned, almost no signs of use Excellent Pre-owned, minimal signs of use Very Good Very good condition, with some signs of use Good Works okay, with some signs of use Normal Works okay, with heavy signs of use For Parts It does not work normally Shipping Shipping Carrier: DHL(From Japan) Expedited Shipping (Outside US) We usully ship within 3 business days of reciving cleared payment.(Japan Time) Buyers Responsibility **International Buyers Please Read Carefully:** Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. About Us: We are mojax inc. We sell reuse items such as luxury brand items, electronics products, and toys. We rediscover the value in reuse items and share it with the world. We belong to The Association Against Counterfeit Product Distribution which aims to prevent and eliminate the distribution of counterfeit and illegal products. We strive to sell only genuine products to our customers.