Description
Preowned McIntosh Audiophile Stereo Receiver W/ Original Box & Remote PLEASE READ. Used, but in very good condition. Please see pictures. The remote is also in good condition. Please note there is a “film” or something on the remote, so it’ll need some time with a Q-Tip and alcohol, but the film does come off. The remote was lost some time ago and, was under a couch or something, so it got really dirty and dusty. It does function though. Comes with original box & remote. Pease note I am selling this as is, for parts or repair only, with no returns. Here’s why: * I am not familiar with these units at all. * I was unable to test it with speakers. I did not have the required cables. I did put it on AM and FM, and it tuned in stations well (I hooked up an antenna). I plugged in headphones, and it sounded great. The VU meters responded as they should. * All lights seem to function well. * The VU meters work as they should when put on “Outputs 1”, but when I switch to “Outputs 2”, the VU meters do not do anything. Again, maybe I just don’t understand these, but I wanted to disclose it. * I’m unsure what the percentage figure means, but it reads in the 20’s in the pictures. * Just comes with what’s in pictures. No cords are included. * It powers up and lights up. All functions seem to work. * The primary reason I am selling this as is, is because I can not fully test it. I am sorry shipping is so much, but this unit is HEAVY, and it will have to be insured as well, and for an item this expensive, it’s kinda pricy. If you are local or close, you are welcome to pick it up, for no shipping charges. Please, if you decide to make an offer, no comments are necessary in the comment section in regards to its condition or worth, etc., in efforts to have the offer accepted, or to explain it. Also please do not ask me what my minimum price is. I am very sorry if this appears rude or terse, but I am just trying to save you time. Thank you for understanding. Specifications: 200 watts x 2 channels into 2, 4, or 8 ohms total harmonic distortion: 0.005% at 20-20,000 Hz frequency response: 10-100,000 Hz (+0, -3dB) signal-to-noise ratio: 95dB (line level), 82dB (phono MM) 80dB (phono MC), 113dB (power amp) wide-band damping factor: greater than 40 DA1 Digital Audio Module can be replaced by future modules to update receiver with the latest digital audio technologies module is equipped with an 8-channel, 32-bit/192kHz Quad Balanced DAC AM/FM tuner with 20 presets per radio band built-in High Drive headphone amplifier large power transformer with multiple filter capacitors and regulated power supply ensures stable, noise-free operation patented McIntosh output Autoformers ensure every connected speaker receives full power regardless of its impedance patented McIntosh Power Guard circuit prevents amplifier clipping to protect speakers Sentry Monitor and Thermal Protection circuits provide long amplifier operating life and protection against overheating Home Theater Pass Through mode allows receiver's amplifier to become part of a multichannel sound system fiber optic illuminated glass front panel for a beautiful appearance and long-term durability adjustable front-panel display brightness settings illuminated power meters (with illumination on/off settings) handcrafted at McIntosh's Binghamton, New York factory Inputs: digital audio inputs on DA1 module: USB (Type B) input for connection to a computer supports high-res PCM files up to 32-bit/284kHz, DSD files up to 11.2 MHz, and DXD files 2 optical and 2 coaxial inputs supported bit depth and sample rates: up to 24-bit/192kHz proprietary MCT input for connecting compatible McIntosh components like a McIntosh MCT450 stereo/SACD/CD transport analog audio inputs: 1 set of balanced stereo XLR inputs 5 stereo RCA audio inputs separate RCA phono inputs for moving magnet (MM) and moving coil (MC) cartridges adjustable input impedance loading for optimum sonic performance with a range of MC cartridges (50-, 100-, 200-, 400-, and 1000-ohm settings) Outputs: custom McIntosh gold-plated binding-post speaker connectors with 2-ohm, 4-ohm, and 8-ohm output taps to match speaker impedance full-size headphone output (100-600 ohms recommended impedance) RCA preamp out/power amp input jacks Other Info and Specs: bass and treble controls with tone control circuitry bypass settings for each individual input source Power Control output provides convenient turn-on/off of McIntosh source components 6 Data Ports provide remote control of connected McIntosh source components RS-232 input for use with external controllers IR in and 12-volt triggers remote 17-1/2W x 7-5/8H x 22D Weight: 75 lbs. Shipping is to the 48 states. Alaska and Hawaii are extra. Please contact me for shipping quote prior to purchase if you do not want it shipped within the continental 48 US States. Thank you. Please note the handling time posted in the the listing. Although we try to ship out as quickly as possible, sometimes we take the entire time window stated in the posting. This listing has an (up to) ten-business-day window before it’s shipped. Please note when we marked an item as shipped, we did not just purchase the shipping label. It means we purchased the shipping label, and it is going out that day. Please note we often use recycled boxes and packing materials. While it is all clean—especially the interior packing material; the packing paper is often new—sometimes it’s used. The boxes may show wear. Most of the time the boxes are used. Please forgive us in advance for this. We are expert packers, so your item will arrive safely (unless the carriers do a number on it, which they do occasionally :(, but to keep our costs down (which serendipitously is good for the environment too), we do this. Thank you in advance for understanding. Please note, if this is a large item, and is sent via freight, it will be sent port to port, to the nearest port to you, and not to your doorstep. If you would like it shipped to your doorstep, please contact us and we will provide you a quote. Thank you. I don't enjoy saying this, but due to a few bad apples almost spoiling eBay for all of us, a seller must protect themselves as well--especially on the higher-dollar items, so the stereo’s serial number and information is logged, and “mapped (fully) with detailed pictures, in the event a return is attempted with a different stereo, or a part is changed or removed. Again, please accept my apologies for this statement. It's only directed toward the 1%. PLEASE NOTE THE STEREO WILL BE SHIPPED IN ITS ORIGINAL BOX. SO THE BOX MAY SHOW SOME ADDITIONAL WEAR FROM TRANSIT. IF YOU WOULD LIKE IT DOUBLE-BOXED TO PROTECT ITS FACTORY BOX, PLEASE NOTIFY ME BEFORE PURCHASE, AND I WILL ADJUST THE PRICE UPWARDS BY $45.00. THANK YOU FOR UNDERSTANDING. Ref: 17226On Jan-19-24 at 17:01:09 PST, seller added the following information: UPDATE 01-19-24: I hooked up a speaker (I could only find a cheap speaker), and hooked up one side at a time to the speaker. It works. Volume cranks and gets loud, but with the cheap speaker, it didn’t sound great, of course, but all sounded decent and clear. No over-modulation, or blown channel, etc. I did not try Output 2, but Output 1 worked fine. On a side note, that percentage readout “mystery” at the bottom of the display I had mentioned in the listing is for volume. Of course I am sure the viewers knew this already. Sorry. I can’t believe I didn’t put two and two together in that regard when I did this posting. Please also note I just located the original power cord for it.
Live search