Mark Levinson Power Supply PLS 226 Audio 105-125VAC Preamplifier Power SupplyTested, in working conditionIn good cosmetic condition!Previous owner said they stored it for approximately 5 years44th unit made (0044)Power cable will be includedFree priority shippingWhat is shown in the pictures is what will be included unless mentioned otherwise

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson Power Supply PLS 226 Audio 105-125VAC Preamplifier Power SupplyTested, in working conditionIn good cosmetic condition!Previous owner said they stored it for approximately 5 years44th unit made (0044)Power cable will be includedFree priority shippingWhat is shown in the pictures is what will be included unless mentioned otherwise

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson LNC-2 Frequency Dividing NetworkCrossover : 250Hz 110V INPUT from JAPAN Our price is 100% negotiable! The price only means ASK!Please make an offer and we will give you the best price! Payment PayPal ONLY. Please pay within 5 days after auction is finished. Shipping We ONLY ship to buyers Paypal registered address. ReturnsItems that are faulty beyond the description given on our auction site should be returned for a full refund.Please contact us by e-mail if items delivered are faulty. However, please send the item back to us. About usOur product is 100% authentic! We dispatch items from Japan. We provide our goods and services based on our motto “Your complete satisfaction is our ultimate goal”. Therefore, please rest assured and make your bid with ease. Please Note International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior.

Mark Levinson Power Supply PLS 226 Audio 105-125VAC Preamplifier Power SupplyTested, in working conditionIn good cosmetic condition!Previous owner said they stored it for approximately 5 years44th unit made (0044)Power cable will be includedFree priority shippingWhat is shown in the pictures is what will be included unless mentioned otherwise

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

MARK LEVINSON DUAL MONAURAL PREAMPLIFIER PREAMP N26Working condition, I just remove it from my setup to upgrade to one with phono preamp- please note: it look like there is a bal/xlr input - I dont understand how to use it or there is no bal input there is no phono input! there is a plock when you plug or remove the plug of the preamp - it is normally always power on but I prefer to hard stop it I have had it since some years and never recap it. look like that everything look ok inside but may be some piece can be changed!power supply is for 220V -> not for usa japan etc -> It sounds very good for me no return for this item!!! sold as is See pictures for cosmetic 7-8/10 The photos are those of the item, you receive what is in the photos (unless otherwise described)All the pictures are from the objectWhat you see is what you will receive (of in the description)! You are welcome to test/look at the item before bidding!Youre welcome to test it before to bid You can pick up the item in Rixensart (Belgium) / send by bpost.You can take the object in Rixensart (Belgium) / sending with the post Not happy ? -> you can return the item within 15 days -> the announcement was not clear? I forgot something? -> I will refund you in full + return costs! -> do you change your mind? -> I will reimburse you for the price of the item! Not happy? -> You can return it within 15 days -I forgot to mention something? -> I will paid for sending back and full refund -You change your mind -> I will refund the cost of the object.!!!No partial refund!!!!

These units were leftover inventory from when Fort Worths most respected high-end electronics store closed. They are still in their original shipping boxes. They come exactly as pictured.THE UNIT IS UNTESTED. IT IS BEING SOLD AS-IS FOR PARTS OR REPAIR. It may function properly but I have not fully tested it so I am selling it FOR PARTS OR REPAIR IN “AS-IS” CONDITION WITH ABSOLUTELY NO RETURNS ACCEPTED!

These units were leftover inventory from when Fort Worths most respected high-end electronics store closed. They are still in their original shipping boxes. They come exactly as pictured.THE UNIT IS UNTESTED. IT IS BEING SOLD AS-IS FOR PARTS OR REPAIR. It may function properly but I have not fully tested it so I am selling it FOR PARTS OR REPAIR IN “AS-IS” CONDITION WITH ABSOLUTELY NO RETURNS ACCEPTED!

Heute biete ich Ihnen folgendes an: Mark Levinson no 30.6 Reference DAC DA-Wandler + PLS-330 Power Supply / Netzteil / Neupreis 15000,00 Euro technischer Zustand: guter Zustand optischer Zustand: guter Zustand / minimale optische Gebrauchsspuren Falls Sie den oben aufgeführten Artikel ersteigern und diesen persönlich bei mir abholen, so können wir diesen sehr gerne gemeinsam auf den von mir angegebenen Zustand hin überprüfen. Kein Versand an Packstationen oder Paketshops !!! No shipping to USA

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson Pre Amp No. 26 and Power Supply PLS-226 tested and working, comes with OEM power cable, connector cable, and service and operating manuals. Also comes with 4 sets of Nakamichi Mark Levinson audio cables. Due to the nature of vintage electronics of this age, which could need service at anytime, and the few unscrupulous buyers out there that change parts, this is sold as parts or repair needed, as is, no returns, no refunds. I hope you understand this with vintage electronics.  This Mark Levinson power amplifier and preamp set, along with the PLS 226 power supply and cables, is a rare find for audiophiles seeking top-quality sound. The brand is known for its unparalleled performance, making this set a must-have for serious music enthusiasts. The model number 26 & 226 ensures compatibility with a variety of cables and devices, making it a versatile addition to any home audio setup. Whether you're a seasoned collector or new to the world of high-end audio, this Mark Levinson set is sure to impress.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson Pre Amp No 26 AND Power Supply PLS 226 IN OPEN BOXThese units were leftover inventory from when Fort Worths most respected high-end electronics store closed. They are still in their original shipping boxes. They come exactly as pictured.

Follow us| Sign up for our newsletter Mark Levinson LNC-2 - Audiophile Quality Active Crossover with PLS-151 PSU For over 20 years High End Audio Auctions has been selling the finest HiFi online, but did you know that we BUY your HiFi equipment as well? Contact our sister company STEREOBUYERS for a fair quote today! All items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available Mark Levinson LNC-2 with PLS-151 Power Supply Details & Testing Notes Cosmetic Condition:7/10: Good - some signs of wear, looks used but well-maintained. Unit shows light signs of use. Good overall physical condition. Please see all high resolution photographs, including detailed inside shows, below.Functional Notes:Functions as intended and sounds excellent.Voltage:105-125V 50/60HzSerial #:822Original Box:NoManual:NoPower Cord:YesShipping Method:FedEx Ground (Domestic) / USPS Priority, Ebay Standard Delivery (International)Shipping Weight (lbs):10 (22x18x10) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1516 (GS 9.3 (1516))

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson Pre Amp No 26 AND Power Supply PLS 226 IN OPEN BOXThese units were leftover inventory from when Fort Worths most respected high-end electronics store closed. They are still in their original shipping boxes. They come exactly as pictured.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson Pre Amp No 26 AND Power Supply PLS 226 NEW IN OPEN BOXThese units were leftover inventory from when Fort Worths most respected high-end electronics store closed. They are still in their original shipping boxes. They come exactly as pictured.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.