The surround receiver is used, but in very good condition. Everything works as it should. It comes double-packaged so it is well protected during transport. I do not offer a guarantee or returns.It comes in its original packaging, remote control, calibration microphone, etc. It is also available elsewhere, I will end this on ebay if it is sold elsewhere. Shipping to Germany with GLS 50,-Euro For other country please ask. Der Surround-Receiver ist gebraucht, aber in sehr gutem Zustand. Alles funktioniert wie es soll. Es wird in einer Doppelverpackung geliefert, sodass es beim Transport gut geschützt ist. Ich biete keine Garantien oder Rücksendungen an.Es wird in Originalverpackung, Fernbedienung, Kalibrierungsmikrofon usw. geliefert. Es steht auch woanders zum Verkauf, ich werde es hier bei eBay beenden, wenn es woanders verkauft wird. Versand nach Deutschland mit GLS 50,-Euro. Für andere Länder fragen Sie. Audio section Power amplifier Rated output: Front: 125 W + 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Center: 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 125 W + 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Surround back / Height1 / Height2: 125 W + 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Output connectors: 4 – 16 ?/ohmsAp Analog Input sensitivity: 200 mV Frequency response: 10 Hz – 100 kHz — +1, –3 dB (Direct mode) S/N: 100 dB (IHF–A weighted, Direct mode) Distortion: 0.005 % (20 Hz – 20 kHz) (Direct mode) Rated output: 1.2 V Digital D/A output: Rated output — 2 V (at 0 dB playback) Total harmonic distortion — 0.008 % (1 kHz, at 0 dB) S/N ratio — 102 dB Dynamic range — 100 dB Digital input: Format — Digital audio interface Phono equalizer Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (IHF-A) Distortion factor: 0.03 % (1 kHz, 3 V)ix Video section Standard video connectors Input/output level and impedance: 1 Vp-p, 75 ?/ohms Frequency response: 5 Hz – 10 MHz — 0, –3 dB Color component video connector Input/output level and impedance: Y signal — 1 Vp-p, 75 ?/ohms PB / CB signal — 0.7 Vp-p, 75 ?/ohms PR / CR signal — 0.7 Vp-p, 75 ?/ohms Frequency response: 5 Hz – 60 MHz — 0, –3 dB Tuner section [FM] [AM] (Note: ?V at 75 ?/ohms, 0 dBf = 1 x 10 –15 W) Reception frequency range: 87.5 MHz – 108.0 MHz 522 kHz – 1611 kHz Effective sensitivity: 1.2 ?V (12.8 dBf) 18 ?V 50 dB sensitivity: MONO ? 2.8 ?V (20.2 dBf) S/N ratio: MONO ? 70 dB (IHF–A weighted, Direct mode) STEREO ? 67 dB (IHF–A weighted, Direct mode) Distortion: MONO ? 0.7 % (1 kHz) STEREO ? 1.0 % (1 kHz) Wireless LAN section Network type (wireless LAN standard): Conforming to IEEE 802.11a/b/g/n (Wi-Fi® compliant) z1 Security: WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Used frequency range: 2.4 GHz, 5 GHz *1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance. Bluetooth section Communications system: Bluetooth Specification Version 3.0 + EDR (Enhanced Data Rate) Transmission power: Bluetooth Specification Power Class 1 Maximum communication range: Approx. 30 m in line of sight z2 Used frequency range: 2.4 GHz Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.5 Corresponding codec: SBC Transmission range (A2DP): 20 Hz – 20,000 Hz *2 The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc. General Power supply: AC 230 V, 50/60 Hz Power consumption: 710 W Power consumption in standby mode: 0.2 W Power consumption in CEC standby mode: 0.5 W For purposes of improvement, specifications and design are subject to change without notice.

The surround receiver is used, but in very good condition. Everything works as it should. It comes double-packaged so it is well protected during transport. I do not offer a guarantee or returns.It comes in its original packaging, remote control, calibration microphone, etc. It is also available elsewhere, I will end this on ebay if it is sold elsewhere. Shipping to Germany with GLS 50,-Euro For other country please ask. Der Surround-Receiver ist gebraucht, aber in sehr gutem Zustand. Alles funktioniert wie es soll. Es wird in einer Doppelverpackung geliefert, sodass es beim Transport gut geschützt ist. Ich biete keine Garantien oder Rücksendungen an.Es wird in Originalverpackung, Fernbedienung, Kalibrierungsmikrofon usw. geliefert. Es steht auch woanders zum Verkauf, ich werde es hier bei eBay beenden, wenn es woanders verkauft wird. Versand nach Deutschland mit GLS 50,-Euro. Für andere Länder fragen Sie. Audio section Power amplifier Rated output: Front: 125 W + 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Center: 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 125 W + 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Surround back / Height1 / Height2: 125 W + 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Output connectors: 4 – 16 ?/ohmsAp Analog Input sensitivity: 200 mV Frequency response: 10 Hz – 100 kHz — +1, –3 dB (Direct mode) S/N: 100 dB (IHF–A weighted, Direct mode) Distortion: 0.005 % (20 Hz – 20 kHz) (Direct mode) Rated output: 1.2 V Digital D/A output: Rated output — 2 V (at 0 dB playback) Total harmonic distortion — 0.008 % (1 kHz, at 0 dB) S/N ratio — 102 dB Dynamic range — 100 dB Digital input: Format — Digital audio interface Phono equalizer Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (IHF-A) Distortion factor: 0.03 % (1 kHz, 3 V)ix Video section Standard video connectors Input/output level and impedance: 1 Vp-p, 75 ?/ohms Frequency response: 5 Hz – 10 MHz — 0, –3 dB Color component video connector Input/output level and impedance: Y signal — 1 Vp-p, 75 ?/ohms PB / CB signal — 0.7 Vp-p, 75 ?/ohms PR / CR signal — 0.7 Vp-p, 75 ?/ohms Frequency response: 5 Hz – 60 MHz — 0, –3 dB Tuner section [FM] [AM] (Note: ?V at 75 ?/ohms, 0 dBf = 1 x 10 –15 W) Reception frequency range: 87.5 MHz – 108.0 MHz 522 kHz – 1611 kHz Effective sensitivity: 1.2 ?V (12.8 dBf) 18 ?V 50 dB sensitivity: MONO ? 2.8 ?V (20.2 dBf) S/N ratio: MONO ? 70 dB (IHF–A weighted, Direct mode) STEREO ? 67 dB (IHF–A weighted, Direct mode) Distortion: MONO ? 0.7 % (1 kHz) STEREO ? 1.0 % (1 kHz) Wireless LAN section Network type (wireless LAN standard): Conforming to IEEE 802.11a/b/g/n (Wi-Fi® compliant) z1 Security: WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Used frequency range: 2.4 GHz, 5 GHz *1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance. Bluetooth section Communications system: Bluetooth Specification Version 3.0 + EDR (Enhanced Data Rate) Transmission power: Bluetooth Specification Power Class 1 Maximum communication range: Approx. 30 m in line of sight z2 Used frequency range: 2.4 GHz Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.5 Corresponding codec: SBC Transmission range (A2DP): 20 Hz – 20,000 Hz *2 The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc. General Power supply: AC 230 V, 50/60 Hz Power consumption: 710 W Power consumption in standby mode: 0.2 W Power consumption in CEC standby mode: 0.5 W For purposes of improvement, specifications and design are subject to change without notice.

The surround receiver is used, but in very good condition. Everything works as it should. It comes double-packaged so it is well protected during transport. I do not offer a guarantee or returns.It comes in its original packaging, remote control, calibration microphone, etc. It is also available elsewhere, I will end this on ebay if it is sold elsewhere. Shipping to Germany with GLS 50,-Euro For other country please ask. Der Surround-Receiver ist gebraucht, aber in sehr gutem Zustand. Alles funktioniert wie es soll. Es wird in einer Doppelverpackung geliefert, sodass es beim Transport gut geschützt ist. Ich biete keine Garantien oder Rücksendungen an.Es wird in Originalverpackung, Fernbedienung, Kalibrierungsmikrofon usw. geliefert. Es steht auch woanders zum Verkauf, ich werde es hier bei eBay beenden, wenn es woanders verkauft wird. Versand nach Deutschland mit GLS 50,-Euro. Für andere Länder fragen Sie. Audio section Power amplifier Rated output: Front: 125 W + 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Center: 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 125 W + 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Surround back / Height1 / Height2: 125 W + 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Output connectors: 4 – 16 ?/ohmsAp Analog Input sensitivity: 200 mV Frequency response: 10 Hz – 100 kHz — +1, –3 dB (Direct mode) S/N: 100 dB (IHF–A weighted, Direct mode) Distortion: 0.005 % (20 Hz – 20 kHz) (Direct mode) Rated output: 1.2 V Digital D/A output: Rated output — 2 V (at 0 dB playback) Total harmonic distortion — 0.008 % (1 kHz, at 0 dB) S/N ratio — 102 dB Dynamic range — 100 dB Digital input: Format — Digital audio interface Phono equalizer Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (IHF-A) Distortion factor: 0.03 % (1 kHz, 3 V)ix Video section Standard video connectors Input/output level and impedance: 1 Vp-p, 75 ?/ohms Frequency response: 5 Hz – 10 MHz — 0, –3 dB Color component video connector Input/output level and impedance: Y signal — 1 Vp-p, 75 ?/ohms PB / CB signal — 0.7 Vp-p, 75 ?/ohms PR / CR signal — 0.7 Vp-p, 75 ?/ohms Frequency response: 5 Hz – 60 MHz — 0, –3 dB Tuner section [FM] [AM] (Note: ?V at 75 ?/ohms, 0 dBf = 1 x 10 –15 W) Reception frequency range: 87.5 MHz – 108.0 MHz 522 kHz – 1611 kHz Effective sensitivity: 1.2 ?V (12.8 dBf) 18 ?V 50 dB sensitivity: MONO ? 2.8 ?V (20.2 dBf) S/N ratio: MONO ? 70 dB (IHF–A weighted, Direct mode) STEREO ? 67 dB (IHF–A weighted, Direct mode) Distortion: MONO ? 0.7 % (1 kHz) STEREO ? 1.0 % (1 kHz) Wireless LAN section Network type (wireless LAN standard): Conforming to IEEE 802.11a/b/g/n (Wi-Fi® compliant) z1 Security: WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Used frequency range: 2.4 GHz, 5 GHz *1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance. Bluetooth section Communications system: Bluetooth Specification Version 3.0 + EDR (Enhanced Data Rate) Transmission power: Bluetooth Specification Power Class 1 Maximum communication range: Approx. 30 m in line of sight z2 Used frequency range: 2.4 GHz Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.5 Corresponding codec: SBC Transmission range (A2DP): 20 Hz – 20,000 Hz *2 The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc. General Power supply: AC 230 V, 50/60 Hz Power consumption: 710 W Power consumption in standby mode: 0.2 W Power consumption in CEC standby mode: 0.5 W For purposes of improvement, specifications and design are subject to change without notice.

Sie bieten auf einen AV Netzwerk Receiver SR7012 in der Farbe silber der Marke Marantz. Fehlerbild: Keine Tonwiedergabe Das Gerät ist gebraucht, aber in gutem Zustand Lieferumfang: Transportsichere Verpackungohne Fernbedienungohne weiteres Zubehör

The surround receiver is used, but in very good condition. Everything works as it should. It comes double-packaged so it is well protected during transport. I do not offer a guarantee or returns.It comes in its original packaging, remote control, calibration microphone, etc. It is also available elsewhere, I will end this on ebay if it is sold elsewhere. Shipping to Germany with GLS 50,-Euro For other country please ask. Der Surround-Receiver ist gebraucht, aber in sehr gutem Zustand. Alles funktioniert wie es soll. Es wird in einer Doppelverpackung geliefert, sodass es beim Transport gut geschützt ist. Ich biete keine Garantien oder Rücksendungen an.Es wird in Originalverpackung, Fernbedienung, Kalibrierungsmikrofon usw. geliefert. Es steht auch woanders zum Verkauf, ich werde es hier bei eBay beenden, wenn es woanders verkauft wird. Versand nach Deutschland mit GLS 50,-Euro. Für andere Länder fragen Sie. Audio section Power amplifier Rated output: Front: 125 W + 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Center: 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 125 W + 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Surround back / Height1 / Height2: 125 W + 125 W (8 ?/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 ?/ohms, 1 kHz with 0.7 % T.H.D.) Output connectors: 4 – 16 ?/ohmsAp Analog Input sensitivity: 200 mV Frequency response: 10 Hz – 100 kHz — +1, –3 dB (Direct mode) S/N: 100 dB (IHF–A weighted, Direct mode) Distortion: 0.005 % (20 Hz – 20 kHz) (Direct mode) Rated output: 1.2 V Digital D/A output: Rated output — 2 V (at 0 dB playback) Total harmonic distortion — 0.008 % (1 kHz, at 0 dB) S/N ratio — 102 dB Dynamic range — 100 dB Digital input: Format — Digital audio interface Phono equalizer Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (IHF-A) Distortion factor: 0.03 % (1 kHz, 3 V)ix Video section Standard video connectors Input/output level and impedance: 1 Vp-p, 75 ?/ohms Frequency response: 5 Hz – 10 MHz — 0, –3 dB Color component video connector Input/output level and impedance: Y signal — 1 Vp-p, 75 ?/ohms PB / CB signal — 0.7 Vp-p, 75 ?/ohms PR / CR signal — 0.7 Vp-p, 75 ?/ohms Frequency response: 5 Hz – 60 MHz — 0, –3 dB Tuner section [FM] [AM] (Note: ?V at 75 ?/ohms, 0 dBf = 1 x 10 –15 W) Reception frequency range: 87.5 MHz – 108.0 MHz 522 kHz – 1611 kHz Effective sensitivity: 1.2 ?V (12.8 dBf) 18 ?V 50 dB sensitivity: MONO ? 2.8 ?V (20.2 dBf) S/N ratio: MONO ? 70 dB (IHF–A weighted, Direct mode) STEREO ? 67 dB (IHF–A weighted, Direct mode) Distortion: MONO ? 0.7 % (1 kHz) STEREO ? 1.0 % (1 kHz) Wireless LAN section Network type (wireless LAN standard): Conforming to IEEE 802.11a/b/g/n (Wi-Fi® compliant) z1 Security: WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Used frequency range: 2.4 GHz, 5 GHz *1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance. Bluetooth section Communications system: Bluetooth Specification Version 3.0 + EDR (Enhanced Data Rate) Transmission power: Bluetooth Specification Power Class 1 Maximum communication range: Approx. 30 m in line of sight z2 Used frequency range: 2.4 GHz Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.5 Corresponding codec: SBC Transmission range (A2DP): 20 Hz – 20,000 Hz *2 The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc. General Power supply: AC 230 V, 50/60 Hz Power consumption: 710 W Power consumption in standby mode: 0.2 W Power consumption in CEC standby mode: 0.5 W For purposes of improvement, specifications and design are subject to change without notice.

Excellent condition Marantz SR7012 receiver! This receiver is highly rated and for good reason. A powerhouse of a receiver that delivers a level of clarity and precision you can expect from a Marantz. An array of inputs, outputs, smart technology customization and support for up to 11.2 channel configurations cement this receivers place in any home theatre system you have! One owner and well cared for! Includes the receiver, remote, antenna and the Audyssey microphone. See my feedback and buy with confidence! Orders will ship within 3 business days (M-F)Shipping cost is for contiguous 48 states only. If you are in Alaska, Hawaii, or any US Territory please contact me prior to purchasing. Please review all photos and description prior to purchasing and reach out if you have any questions.

This amp recently stopped working. The HDMI out to TV was not working. I took it to the dealer where I purchased it and found out it was out of warranty. So I bought another amp. THIS AMP IS NOT WORKING, it needs repair and is in protection mode. Video of start up available.

Verkaufe hier einen Marantz SR7012 funktioniert einwandfrei wurde nicht schwer beansprucht nur ein kleiner Kratzer vorne an der Front oben links (siehe Bilder) Verkaufe es weil ich mir ein SR 8015 gebraucht gekauft habe

Der Marantz SR7012 ist ein erstklassiger Verstärker für ein beeindruckendes Heimkinoerlebnis. Mit Unterstützung für Dolby Atmos liefert dieser Reciever einen klaren und leistungsstarken Sound für Filme, Musik und Spiele. Mit 11.2 Kanälen bietet er eine immersive Surround-Sound-Erfahrung, die jeden Raum füllt. Dieses Gerät ist in einem neuwertigen Zustand und bereit, Ihr Unterhaltungssystem auf das nächste Level zu bringen. Abholung oder Versand möglich

ITEM DESCRIPTION This is a Marantz SR7012 A/V Home Theater Receiver w/Dolby Atmos 8K HDMI inputs - NOT WORKING & FOR PARTS ONLY.This item is in good cosmetic condition with minor scratches.This Marantz SR7012 A/V Receiver will not power on. Issue is consistent. Checked the unit as well as the outlets. Issue continues to persist.This Marantz SR7012 A/V Receiver I heard a clicking sound and the receiver restarted. I am not getting any sound from the speakers.This Marantz SR7012 A/V Receiver only has passthrough HDMI on picture, not getting any multizone HDMI to work to other tv.This Marantz SR7012 A/V Receiver has a serial number AVG27180809055.This Marantz SR7012 A/V Receiver is considered NOT WORKING AND BEING SOLD FOR PARTS ONLY.This Marantz SR7012 A/V Receiver HAS NO ACCESSORIES AND IS SOLD AS SHOWN IN THE PHOTOS. THIS ITEM IS SOLD AS-IS REF 1822950 If you have any question or problem about your transaction, please give us the opportunity to resolve any problem before leaving negative feedback. 100% Customer satisfaction is our #1 Goal.In most cases when a buyer has a problem with his purchase we can reach a resolution that will make both buyer and seller happy. Please feel free to contact us on eBays Internal Message System for any questions or concerns you may have.If you are satisfied with your purchase, please leave positive feedback.

This Marantz SR7012 A/V Home Theater Receiver receiver features Dolby Atmos and DTS-HD Master Audio formats, along with Dolby TrueHD and DTS:X surround sound options. With 9.2 channels and HDMI inputs, you can connect multiple devices and enjoy a seamless home theater experience. The sleek black design complements any room decor. This receiver is being sold for parts only. Damaged faceplate dent on the top lid, slight scratches and dents please see pictures for more on the physical condition of unit.

Used in non-smoking household. Clean, no cosmetic issues. Ships in original double box. Includes Audessey mic, cardboard stand, power cord and remote. Updated with latest firmware. If you are going to use an amp with XLR inputs, Ill throw in 8, 3ft Premiere RCA to XLR cables from Monoprice, an $88 value. See Monoprice product ID 4777.

Used in non-smoking household. Clean, no cosmetic issues. Ships in original double box. Includes Audessey mic, cardboard stand, power cord and remote. Updated with latest firmware. If you are going to use an amp with XLR inputs, Ill throw in 8, 3ft Premiere RCA to XLR cables from Monoprice, an $88 value. See Monoprice product ID 4777.

Marantz SR7012 11.2-Channel Home Theater - Black - TESTED Tested Working: Unit powers on and both screens light up without issues. I tested the analog audio inputs along with the various speaker outputs. I also tested all the HDMI ports, and factory reset the unit and went through setup to make sure the controls were working as intended. Physical Condition: Unit is in good physical condition with various smaller scratches on the units surface, mostly located on the top face of the unit, but no major damage or dents on the unit. (see photos) Comes with standard C13 power cable NO original packaging, manuals, or other accessories included Feel free to message with any questions related to this listing. Units sold have a 30 day money back return policy, (buyer pays return shipping) If you have any questions or issues with items purchased please contact us immediately before starting a return.We only reply to direct messages and ship packages during our business hours of Monday-Friday 9AM-5PM PST.

Amazing, too powerful for my needs. Has remote. Will ship with tons of protected and packed by local pro

Marantz SR7012 - 9.2-Kanal-A/V-Receiver, funktioniert - Lautstärkeregler ungenau Funktion ist gegeben mit nachfolgend aufgeführten Mängeln festgestellte Mängel : Lautstärkeregler mit Aussetzern während der Regelung, wobei der Fehler bei lauter-Regelung wesentlich stärker auftritt als bei leiser - siehe VideoDie LS-Regelung über Fernbedienung ( nicht im Lieferumfang ) funktioniert Aufgrund der aufgeführten Mängel und Defekte, wird das Gerät alsdefekte Bastlerware / Ersatzteilspender angeboten - unter Ausschluss jeglicher Gewährleistung ! ! Versand aufgrund der Maße und Gewicht teurer als üblich !! Verkauf nur nach Deutschland !! no shipping to foreign countries - Germany only ! Versand per Hermes versichertAbholung bei Vorkasse nach Vereinbarung möglichSie erhalten auf Wunsch eine Rechnung mit ausgewiesener Mwst. ( als pdf )Der Umwelt zuliebe verwenden wir bevorzugt recycelte Versandverpackungen und Polstermaterial

This Marantz SR7012 A/V Receiver is a great choice for those who want to enhance their home theater experience. With 9.2 channels and a range of surround sound formats including DTS, Dolby TrueHD, and DTS-HD Master Audio, you can enjoy high-quality audio that immerses you in the middle of the action. The receiver also supports Dolby Atmos and DTS-HD, making it a versatile device for all your home entertainment needs. In addition, the Marantz SR7012 comes in a sleek black color and is perfect for those who want to upgrade their home audio setup. Although this item is being sold for parts or needs work, it has the potential to be a great addition to any home theater system. Boots up and then power light flashes

This original Marantz remote controller is designed for use with the SR 7010, SR70011, and SR7012 models. It provides wireless control with a range of 5-10 meters and features a sleek black design. The unit is compatible with Marantz brand products and is made in Malaysia. The RC026SR remote control is an essential accessory for your Marantz audio system. It allows you to control your music and audio equipment with ease, without having to get up from your seat. Its wireless feature ensures that you can control your audio equipment from a distance without any hassle. Get your hands on this Marantz remote controller today and enjoy the convenience of wireless control.

Up for sale is a Marantz SR 7012 receiver that is in perfect working condition. No physical damage and was used in a non-smoking home inside a well-ventilated BDI console. Item comes with stock accessories such as the Audyssey microphone, power cord, antennas, and manual. It will be shipped in a well padded SR 8015 box.

This is a used marantz receiver SR7012 that has been refurbished. It is perfect working condition. Sold AS IS and shown in the photos.

Marantz SR 7012 9.2 channel 4k AV receiver with Dolby Atmos. In pristine condition, no scratches or blemishes. I have upgraded to a newer model. Comes with original remote control, antennas, setup microphone. It will be packed carefully in oversized box for maximum protection and shipped insured. Apart from the 8k HDMI inputs, this unit is virtually identical to the newest model. Lots of power to drive even the most demanding speakers.

Der Marantz AV Surround Receiver SR7012 in silber bietet ein herausragendes Klangerlebnis fr Ihr Heimkino. Mit modernster Technologie und einer Leistung von 200 Watt pro Kanal liefert dieser A/V-Receiver eine beeindruckende Audioqualitt. Das Modell SR7012 verfgt ber zahlreiche Anschlussmglichkeiten und untersttzt die neuesten Audio-Formate fr ein immersives Filmerlebnis. Ein elegantes Design und die hochwertige Verarbeitung machen diesen Receiver zu einem echten Hingucker in Ihrem Wohnzimmer. Mit den richtigen Lautsprechern baust du dir damit ein professionelles Heimkino auf. Alle Details: https://www.marantz.com/en-us/product/archive-av-receivers/sr7012/810253.html Testbericht: https://www.testberichte.de/p/marantz-tests/sr7012-testbericht.html Das Gert ist technisch und optisch in sehr gutem Zustand. Ich kann keine Gebrauchsspuren erkennen. Zubehr, Anleitung und Originalkarton vollstndig dabei. Privatverkauf unter Ausschluss von Garantien und Gewhrleistungen.

Original Marantz Remote Control SR026SR for Marantz Receivers SR 7010, SR70011, SR7012, in PERFECT condition, not one scratch