Description
This is one set Brand New not used before Marantz PM-K1 Ruby Signature Reference Integrated amplifier in Gold color. MADE IN JAPAN in 230V. The PM-KI Ruby is an analogue amplifier; all digital duties are handled by the partnering SA-KI Ruby SACD/CD player and DAC reviewed in the January issue (168). It only has single-ended inputs, which differentiates it from the rather more pricey PM-10 (externally and internally, the PM-10 is a balanced amplifier). But there are two pairs of inputs that stand out by virtue of silver plating instead of the ubiquitous gold finish, silver being a better conductor but one that’s rarely used because of its tendency to tarnish. The second pair of silver terminals is for a phono stage, and not just an MM one at that. In fact, it’s a rather special part of the amplifier that Ishiwata is particularly proud of; it’s a discrete, cascaded design with an initial gain stage for MC that acts like a head amp before the EQ stage, which is a very rare approach outside of tube preamplifiers. Ken has long been a tube fan so it’s not surprising, but the fact that it’s a superior phono stage to the one in the PM-10 according to Ken is surprising. Switching between MM and MC settings is done via the display, you can’t adjust gain or impedance and unusually the MM impedance is set at 39 kOhms rather than the standard 47 kOhms. Other features accessible via the setup include bass and treble trim and different levels of attenuation applied when ‘mute’ is selected. The back panel includes four line inputs atop the fancy silver pair, two recorder outputs and ‘power amp in’, which could be used with a better preamplifier or an AV processor as it effectively goes straight to the power amp section of the PM-KI Ruby and allows it to be integrated into a surround system. My first experience with this amplifier was in tandem with the matching SA-KI Ruby disc player/DAC and Revel 126Be loudspeakers, which produced an extremely polished and refined result but not one that was in danger of causing the listener to break a sweat. This was a case of three rights not adding up to a wrong but neither was it a successful combo, so I concentrated on the player in a variety of systems and left the amplifier to fend for itself. And it fended rather well once I had found a sympathetic speaker. That said it didn’t do badly with my usual choice of transducer, the PMC Fact.8, which brought out the musical skills of the PM-KI Ruby rather well. I spent some time listening to vinyl spun on a Rega RP10 with Aphelion MC cartridge and was pleased to find that the MC stage on the amp had sufficient gain to produce a dynamic result where the recording warranted it. Not all my favourite music is that well produced, however, and where compression has been used the Marantz will make it fairly clear. It’s a usefully transparent amplifier albeit one with a refined presentation that can fool you into thinking that it’s smoothing over the fine detail. In fact, it’s just very fine grained and revealing – put on something raw and it will sound that way. There’s decent power and drive on Ryley Walker’s Primrose Green[Dead Oceans] but it is reined in by the annoying powers of limiting. And yet that doesn’t get in the way of the music, which is close to the performance you’d expect from a decent standalone phono stage. Bill Evans’ Waltz for Debby[Riverside] sounds its age after that but also reveals the nuances of playing from Evans and his band in the context of a distinctly live setting, one that must surely have influenced that old hi-fi favourite Jazz at the Pawnshop{Proprius]. It did occur to me as I pushed the volume to the mid-twenties on the minus decibel scale that it would be alarming if I were to switch to the line input and put on a high level digital recording, which I’ve done enough times now to be wary, but it makes a good case for each input to remember the level it was last used at. The half dB volume scale is very nice though; even with the remote you can make fine adjustments with ease. I did switch over to a Naim NDX 2 to see what the Evans would sound like from that source and have to say that it made a good case for seeking out the vinyl. At this point I switched to a loudspeaker that Ken Ishiwata seems to like, the Q Acoustics Concept 500, which he was using in his fabulous demonstration room last time I visited back in 2017. This partnership has an openness and warmth that’s very appealing with excellent bass extension and control, the double bass on ‘Waltz for Debby (Take 2)’ being particularly eloquent and the voices in the background unusually realistic. For a change I tried Codename: Dustsuckerby Bark Psychosis [Fire], who picked up where Talk Talk left off, ish. This was as fulsome as ever but nicely controlled so that you could hear into the mix; in fact, you could almost swim into it, such is the thickness of the low end. But when a distorted guitar cuts in there is plenty of edge on it, but not so much as to discourage high level listening and I had to let the track run. The same went for several other pieces, it’s clear that this Marantz has a facility for opening up the music so that you can hear what’s good about it. It doesn’t do this with a charming balance but by letting all the important details through in a coherent and fluid fashion. It reveals big contrasts in recording sound, Lou Reed’s voice on ‘Walk on the Wild Side’ [Transformer, RCA] is very nice, a little sweetened perhaps but engaging nonetheless, whereas the acoustic guitar that Joni Mitchell plays on ‘A Case of You’ [Miles of Aisles, Asylum] sounds positively scrawny, but the beauty of the performance is clear and wide. This is especially the case when the band plays ‘Carey’ with her and the stage opens up to let some remarkable playing take place. At an age when many hang up their interconnects, Ken Ishiwata is still doing great things with audio electronics. And he’s doing it for a company that knows how to build very serious pieces of kit, chattering relays notwithstanding. The PM-KI Ruby is a far more musical and enthralling amplifier than it first seems; give it some time and you’ll fall under its spell. TECHNICAL SPECIFICATIONSType: Solid-state, two-channel integrated amplifier with built-in phono stage, and headphone amplifierAnalogue inputs: One MM/MC phono input (via RCA jacks), five single-ended line-level inputs (via RCA jacks), one preamp input (via RCA jacks)Analogue outputs: Two tape outputs (via RCA jacks), one headphone output (via 6.35mm jack)Input impedance:High-level: 220 mV/13 k?/kohmsPhono: MM 2.3 mV/39 k?/kohms, MC 250 µV / 100 ?/ohmsPower amp: 1.1V/13 kOhmsOutput impedance (preamp): N/AHeadphone Loads: Not specifiedPower Output: 100Wpc @ 8 Ohms, 200Wpc @ 4 OhmsBandwidth: Not specifiedDistortion: THD 1 kHz, simultaneous drive of both channels, 100 W, 8 ?/ohms load 0.005%.Signal to Noise Ratio: line 107 dB (Rated output)Dimensions (H×W×D): 127 ×440 ×453mmWeight: 15.7kg SHIPPING TO WORLDWIDE BY EXPEDITED AIR PARCEL WITH TRACKING INFORMATION AT US$300.00International Buyer and/or recipient are responsible for paying all customs taxes/VATs/import duties that MAY be imposed by your countrys customs bureau. More information can be obtained by contacting your local customs office.If you have any questions, please do not hesitate to contact me.
Live search