Dies ist wirklich einer der klassischen Marantz-Receiver aus den 1970er Jahren Es hat eine erstaunliche Klangqualität. Es wurde innen und außen gereinigt. Der Verstärker wurde neu gekappt (Kondensatoren wurden ersetzt). Alle Schalter und Potentiometer wurden gereinigt. Die Beleuchtung wurde durch die neuen LED-Leuchten ersetzt. Die Offset- und Verstärkerspannungen wurden laut Serviceanleitung eingestellt. Alle notwendigen Wartungsarbeiten wurden durchgeführt. Der Verstärker funktioniert wie er soll. Bitte beachten Sie die Bilder für eine zusätzliche Beschreibung. Sie hat normale Gebrauchsspuren, wenn man an das Alter denkt. Bitte zögern Sie nicht für Fragen. Alle angemessenen Angebote werden berücksichtigt. Viel Spaß beim Bieten.This is a really one of the Classic Marantz Receivers from 1970’sIt has an amazing sound quality.It got cleaned inside and outside.The amplifier got recapped ( Capacitors got replaced).All the switches and potentiometers got cleaned.The lights got replaced with the new LED lights.The offset and amplifier voltages got adjusted in according to service manual.All the necessary maintenance has been performed.The amplifier works as it should be.Please refer to the pictures for an additional description.It has normal wear and tear when you think about the age.Please don’t hesitate for any question.All the reasonable offers will be considered.Happy bidding.

You are bidding on four brand new (New Old Stock) American made 1 high feet that are the perfect size replacement feet for Marantz receivers such as the 2215, 2230, 2238, 2240, 2245, 2250, 2252, 2270, 2385, 2500, 2600, 4230, 4270, 4415, 4430, and all other full size Marantz items from the 1970s and 1980s. These American made feet are much better quality than the original plastic Marantz feet that were manufactured overseas. They will include the correct length Marantz metric screws. These feet also work well with brands such as McIntosh, Fisher, Crown, Heathkit, Dynaco, Harman Kardon, Scott, Sansui, Lafayette, Sherwood, Kenwood, Sony, Technics, Pioneer and many more. They are the exact same material and brand of feet that McIntosh audio equipment has used for close to 50 years. These slightly tapered feet measure 1” high by 7/8” across the top by 1 1/8” across the bottom. These are the exact same original high quality polyethylene feet, by the same American manufacturer that many of the high-end companies from the 1960’s, 1970’s, and 1980s used. These feet were made to be almost indestructible! They will work well with almost any brand of audio equipment, and are much better quality than original plastic feet that tend to crack if over tightened. They will not dry out and eventually flatten, like rubber feet have a tendency to do. These American made feet are the best quality audio feet I have ever come across, and were manufactured to last a lifetime! Shipping and handling will be free anywhere in the U.S.A. Thank you.

You are bidding on eight brand new (New Old Stock) American made 1 high feet that are the perfect size replacement feet for Marantz receivers such as the 2215, 2230, 2238, 2240, 2245, 2250, 2252, 2270, 2385, 2500, 2600, 4230, 4270, 4415, 4430, and all other full size Marantz items from the 1970s and 1980s. These American made feet are much better quality than the original plastic Marantz feet that were manufactured overseas. They will include the correct length Marantz metric screws. These feet also work well with brands such as McIntosh, Fisher, Crown, Heathkit, Dynaco, Harman Kardon, Scott, Sansui, Lafayette, Sherwood, Kenwood, Sony, Technics, Pioneer and many more. They are the exact same material and brand of feet that McIntosh audio equipment has used for close to 50 years. These slightly tapered feet measure 1” high by 7/8” across the top by 1 1/8” across the bottom. These are the exact same original high quality polyethylene feet, by the same American manufacturer that many of the high-end companies from the 1960’s, 1970’s, and 1980s used. These feet were made to be almost indestructible! They will work well with almost any brand of audio equipment, and are much better quality than original plastic feet that tend to crack if over tightened. They will not dry out and eventually flatten, like rubber feet have a tendency to do. These American made feet are the best quality audio feet I have ever come across, and were manufactured to last a lifetime! Shipping and handling will be $5.00 anywhere in the U.S.A. Thank you.

You are bidding on four brand new (New Old Stock) American made 1 high feet that are the perfect size replacement feet for Marantz receivers such as the 2215, 2230, 2238, 2240, 2245, 2250, 2252, 2270, 2385, 2500, 2600, 4230, 4270, 4415, 4430, and all other full size Marantz items from the 1970s and 1980s. These American made feet are much better quality than the original plastic Marantz feet that were manufactured overseas. They will include the correct length Marantz metric screws. These feet also work well with brands such as McIntosh, Fisher, Crown, Heathkit, Dynaco, Harman Kardon, Scott, Sansui, Lafayette, Sherwood, Kenwood, Sony, Technics, Pioneer and many more. They are the exact same material and brand of feet that McIntosh audio equipment has used for close to 50 years. These slightly tapered feet measure 1” high by 7/8” across the top by 1 1/8” across the bottom. These are the exact same original high quality polyethylene feet, by the same American manufacturer that many of the high-end companies from the 1960’s, 1970’s, and 1980s used. These feet were made to be almost indestructible! They will work well with almost any brand of audio equipment, and are much better quality than original plastic feet that tend to crack if over tightened. They will not dry out and eventually flatten, like rubber feet have a tendency to do. These American made feet are the best quality audio feet I have ever come across, and were manufactured to last a lifetime! Shipping and handling will be $4.00 anywhere in the U.S.A. Thank you.

You are bidding on eight brand new (New Old Stock) American made 1 high feet that are the perfect size replacement feet for Marantz receivers such as the 2215, 2230, 2238, 2240, 2245, 2250, 2252, 2270, 2385, 2500, 2600, 4230, 4270, 4415, 4430, and all other full size Marantz items from the 1970s and 1980s. These American made feet are much better quality than the original plastic Marantz feet that were manufactured overseas. They will include the correct length Marantz metric screws. These feet also work well with brands such as McIntosh, Fisher, Crown, Heathkit, Dynaco, Harman Kardon, Scott, Sansui, Lafayette, Sherwood, Kenwood, Sony, Technics, Pioneer and many more. They are the exact same material and brand of feet that McIntosh audio equipment has used for close to 50 years. These slightly tapered feet measure 1” high by 7/8” across the top by 1 1/8” across the bottom. These are the exact same original high quality polyethylene feet, by the same American manufacturer that many of the high-end companies from the 1960’s, 1970’s, and 1980s used. These feet were made to be almost indestructible! They will work well with almost any brand of audio equipment, and are much better quality than original plastic feet that tend to crack if over tightened. They will not dry out and eventually flatten, like rubber feet have a tendency to do. These American made feet are the best quality audio feet I have ever come across, and were manufactured to last a lifetime! Shipping and handling will be $5.00 anywhere in the U.S.A. Thank you.

You are bidding on four brand new (New Old Stock) American made 1 high feet that are the perfect size replacement feet for Marantz receivers such as the 2215, 2230, 2238, 2240, 2245, 2250, 2252, 2270, 2385, 2500, 2600, 4230, 4270, 4415, 4430, and all other full size Marantz items from the 1970s and 1980s. These American made feet are much better quality than the original plastic Marantz feet that were manufactured overseas. They will include the correct length Marantz metric screws. These feet also work well with brands such as McIntosh, Fisher, Crown, Heathkit, Dynaco, Harman Kardon, Scott, Sansui, Lafayette, Sherwood, Kenwood, Sony, Technics, Pioneer and many more. They are the exact same material and brand of feet that McIntosh audio equipment has used for close to 50 years. These slightly tapered feet measure 1” high by 7/8” across the top by 1 1/8” across the bottom. These are the exact same original high quality polyethylene feet, by the same American manufacturer that many of the high-end companies from the 1960’s, 1970’s, and 1980s used. These feet were made to be almost indestructible! They will work well with almost any brand of audio equipment, and are much better quality than original plastic feet that tend to crack if over tightened. They will not dry out and eventually flatten, like rubber feet have a tendency to do. These American made feet are the best quality audio feet I have ever come across, and were manufactured to last a lifetime! Shipping and handling will be free anywhere in the U.S.A. Thank you.

You are bidding on four brand new (New Old Stock) American made 1 high feet that are the perfect size replacement feet for Marantz receivers such as the 2215, 2230, 2238, 2240, 2245, 2250, 2252, 2270, 2385, 2500, 2600, 4230, 4270, 4415, 4430, and all other full size Marantz items from the 1970s and 1980s. These American made feet are much better quality than the original plastic Marantz feet that were manufactured overseas. They will include the correct length Marantz metric screws. These feet also work well with brands such as McIntosh, Fisher, Crown, Heathkit, Dynaco, Harman Kardon, Scott, Sansui, Lafayette, Sherwood, Kenwood, Sony, Technics, Pioneer and many more. They are the exact same material and brand of feet that McIntosh audio equipment has used for close to 50 years. These slightly tapered feet measure 1” high by 7/8” across the top by 1 1/8” across the bottom. These are the exact same original high quality polyethylene feet, by the same American manufacturer that many of the high-end companies from the 1960’s, 1970’s, and 1980s used. These feet were made to be almost indestructible! They will work well with almost any brand of audio equipment, and are much better quality than original plastic feet that tend to crack if over tightened. They will not dry out and eventually flatten, like rubber feet have a tendency to do. These American made feet are the best quality audio feet I have ever come across, and were manufactured to last a lifetime! Shipping and handling will be $4.00 anywhere in the U.S.A. Thank you.

You are bidding on four brand new (New Old Stock) American made 1 high feet that are the perfect size replacement feet for Marantz receivers such as the 2215, 2230, 2238, 2240, 2245, 2250, 2252, 2270, 2385, 2500, 2600, 4230, 4270, 4415, 4430, and all other full size Marantz items from the 1970s and 1980s. These American made feet are much better quality than the original plastic Marantz feet that were manufactured overseas. They will include the correct length Marantz metric screws. These feet also work well with brands such as McIntosh, Fisher, Crown, Heathkit, Dynaco, Harman Kardon, Scott, Sansui, Lafayette, Sherwood, Kenwood, Sony, Technics, Pioneer and many more. They are the exact same material and brand of feet that McIntosh audio equipment has used for close to 50 years. These slightly tapered feet measure 1” high by 7/8” across the top by 1 1/8” across the bottom. These are the exact same original high quality polyethylene feet, by the same American manufacturer that many of the high-end companies from the 1960’s, 1970’s, and 1980s used. These feet were made to be almost indestructible! They will work well with almost any brand of audio equipment, and are much better quality than original plastic feet that tend to crack if over tightened. They will not dry out and eventually flatten, like rubber feet have a tendency to do. These American made feet are the best quality audio feet I have ever come across, and were manufactured to last a lifetime! Shipping and handling will be $4.00 anywhere in the U.S.A. Thank you.