More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

Marantz AV8801 11.2 Channel Home Theater Preamp/Processor - See Details Has Remote Control and Power Cord Only Plus Unit. You get the unit in pictures Unit has Been Tested When first hooked up i was getting out of audio through the HDMI ports, when I moved the cable I lost audio and never got it back. Video works on hdmi but no audio. I was able to get through the menu. I couldnt find anything that would be causing it. I believe the HDMI board needs to be replaced. See Pictures for more Details Being Sold AS is No returns - being sold for parts due to unit not working 100%. Check out my other listing. MA_4128 Please review all information in the description and in the pictures. Most of our items are found in purchased storage units and are mostly one-of-a-kind items. You will receive the item in the photos. We do not know the history of any of all the items we sell. We try to describe the item to the best of our knowledge. Final assumption of products condition must be made by the buyers review and research of the item for sale. Please refer to the description on if an item was tested and how. Please feel free to ask any questions before bidding or purchasing an item. All our items are sold in as in condition and we do not accept returns. Once an item has shipped it may not be returned. Happy Bidding or Purchasing. Thanks in Advance. We Always Send Out Reviews Once Item is Delivered.

Great condition Marantz 8801 with original packing and all accessories (CD, remote, set-up mic, etc) 11.2 channels balanced and unbalanced outputs Dolby® TrueHD, DTS-HD™ Master Audio, Dolby® Digital Plus, DTS-HD™ High Resolution Audio, Pro Logic® IIz, ES Discrete/Matrix, Neo:X, 96/24Audyssey Laboratories MultEQ XT32 auto setup and room calibration system (microphone included)Audyssey DSX processing for enhanced surround sound height and width effects using additional front speakersAudyssey Dynamic Volume mode to maintain steady listening levelsAudyssey Dynamic EQ™ for fuller surround sound at lower volumesAudyssey Sub EQ HT optimizes dual-subwoofer setups for smooth, dynamic response4K pass-throughThis receiver is not HDCP 2.2-compliant and will not support copy-protected 4K video content.4K upscaling of SD and HD sources for compatibility with emerging TV technology3D pass-through for 3D programming on compatible HDTVs

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

Pulled form a fully working system Audio control 7channel savoy amp G3 Small scratch on front see photos All have factory racks mounts Local pick up only

Voll funktionsfähig und in gutem Zustand. Das Furnier hat kleinere Macken, löst sich aber nicht ab. Vor etwa 7 Jahren habe ich die vier Bass-Lautsprecherchassis ausgetauscht, diese sind nicht mehr original. Einbeaut sind 4x Renkforce CPA PA-10 10 Zoll 25.4 cm Tiefmitteltöner 150 W 8 ? von Conrad. Ansonsten keine Veränderung, die Frequenzweiche und alles andere sind original/unangetastet. Die Mittel- und Hochtöner funktionieren gut. Gerne vorbei kommen und antesten. Nur Abholung, kein Versand möglich (auch nicht auf Nachfrage). Es handelt sich um einen Privatverkauf. Die Ware wird unter Ausschluss jeglicher Gewährleistung verkauft.

All functions have been tested and are in working order. Purchase includes the tweeters as shown only. The units do have some light signs of use. No screws or other accessories are included unless shown in the photos.