Left overs from my Marantz HD660 speaker cabinet restoration days. I Could probably install them in something else, but, I need to widdle down the parts collection. Time for these to find a new home. Would call them in GREAT to EXCELLENT condition, but that depends on your opinion of course. Cant remember what all was checked way back when, fairly confident all the pots still work good, or I would have tossed them ages ago. Still, check them yourself before installing, no promises as to what works, or how well, etc. What you see, is what you get, two cross-overs with wiring, two control panel plates, four HARD TO FIND control knobs that were not unwrapped for the picture...attaching screws...and four pots/switches for base and treble adjustments. The original MARANTZ speaker wadding in the picture will be used as packing, so if it all fits into the box, you will get the wadding pictured too...or as much as I can fit into the box with the parts. Basically, you are getting it all, for the price of ONE NEW POT these days, in todays world anyway. =/....Assuming you could even find them NEW at all. =(..etc. So, thanks for stopping to take a look, and HAVE FUN EBAYING!!! =)

To whom ever is watching, this is your last chance, soon as my free listings are done, so are these parts. They will get donated to the round file, or to a local audiophile. Get them while you still can. Nuff said. =/ More from the ongoing clean out. Just do not need these drivers anymore, or the controllers, have had them for at least a decade...just sitting in the a/cd walk in closet. =/ Controls include all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD cabinets, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, and or controls, here you go folks. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo driver, made you know where today. =( Shipping will be flat rate. Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers anymore, or the controllers, have had them for at least a decade...just sitting in the a/cd walk in closet. =/ Controls include all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD cabinets, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, and or controls, here you go folks. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo driver, made you know where today. =( Shipping will be flat rate. Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/ Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

Parting Marantz HD660 Pair - Cabinets & Subs shot, all else good & available!! Grills - good condition. Could use a cleaning. Only one has emblem still and that one has very small tear on bottom. Tweeters - excellent! 1 gold, 1 silver Mids - excellent! Emblems - 1 gold, 1 silver Volume/Sound Adjustments knobs - 4 total Speaker wire inputs - 2 available Sub and Mid speaker metal frames - 2 each available “Square head” hardware all available I hooked them both and everything worked except for the subs (needed foam). Let me know what you need and we’ll work it out. Amplify your life! Thanks for supporting small businesses like mine on eBay! I am a professional refurbisher and dealer of home audio equipment and music media. This is another great listing from Twin City Smitty’s Vintage Audio in New Hope, Minnesota. I’d like to take a moment to recognize that most home audio dealers like me recycle the components that don’t work and are not rare. Please consider the time we put in when purchasing and testing this vintage audio gear (not everything makes it to eBay). I recycle as much as I possibly can from non-repairable components. I have refurbished, tested, and sold hundreds of home audio products. Please see my eBay ratings and feedback and bid/buy with confidence. Please also check my other listings for awesome vintage audio listings. I come across some really fun and unique gear sometimes. If you win this auction, this item will be professionally packaged with care and shipped very quickly via FedEx. I take great pride in providing excellent quality products and getting them to my customers safely. Keep in mind when you consider shipping charges, I have to pay for shipping supplies (as well as the actual logistics costs). As you can see by the pictures, I am a professional with an actual shop and do thoroughly test everything that I sell. I do offer a 30 day guarantee. I just love music and this is a 2nd job (but my true passion). I also purchase large home audio collections. I am a professional liquidator of this equipment and am happy to provide assistance in cleaning out hoards and large collections of home audio equipment. Thanks and God Bless, Shawn (Smitty) Twin City Smitty’s Vintage Audio

Marantz High Definition Speaker System HD660 Speakers. Used the cabinets are in good condition, they are working but the foams need to be replacing. One of the fronts is also loose. Collection only due to size and weight

Parting Marantz HD660 Pair - Cabinets & Subs shot, all else good & available!! Grills - good condition. Could use a cleaning. Only one has emblem still and that one has very small tear on bottom. Tweeters - excellent! 1 gold, 1 silver Mids - excellent! Emblems - 1 gold, 1 silver Volume/Sound Adjustments knobs - 4 total Speaker wire inputs - 2 available Sub and Mid speaker metal frames - 2 each available “Square head” hardware all available I hooked them both and everything worked except for the subs (needed foam). Let me know what you need and we’ll work it out. Amplify your life! Thanks for supporting small businesses like mine on eBay! I am a professional refurbisher and dealer of home audio equipment and music media. This is another great listing from Twin City Smitty’s Vintage Audio in New Hope, Minnesota. I’d like to take a moment to recognize that most home audio dealers like me recycle the components that don’t work and are not rare. Please consider the time we put in when purchasing and testing this vintage audio gear (not everything makes it to eBay). I recycle as much as I possibly can from non-repairable components. I have refurbished, tested, and sold hundreds of home audio products. Please see my eBay ratings and feedback and bid/buy with confidence. Please also check my other listings for awesome vintage audio listings. I come across some really fun and unique gear sometimes. If you win this auction, this item will be professionally packaged with care and shipped very quickly via FedEx. I take great pride in providing excellent quality products and getting them to my customers safely. Keep in mind when you consider shipping charges, I have to pay for shipping supplies (as well as the actual logistics costs). As you can see by the pictures, I am a professional with an actual shop and do thoroughly test everything that I sell. I do offer a 30 day guarantee. I just love music and this is a 2nd job (but my true passion). I also purchase large home audio collections. I am a professional liquidator of this equipment and am happy to provide assistance in cleaning out hoards and large collections of home audio equipment. Thanks and God Bless, Shawn (Smitty) Twin City Smitty’s Vintage Audio