Marantz HD 660 Highend Lautsprecher. 2 Stück (1 Paar). Technisch voll funktionsfähig. Optisch guter gebrauchter Zustand mit normalen Gebrauchsspuren. Siehe Fotos.Gebrauchsspuren hauptsächlich unten an einer Ecke und an den Abdeckungen. Siehe Fotos. Zubehör: BedienungsanleitungKein weiteres Zubehör dabei. Maße ca.: Höhe 65cm, Breite 35cm, Tiefe 28,5cm Gewicht 1 Stück ca: 11,5 Kg. Abholung möglich. Europaweiter Versand. Alle Markennamen, Warenzeichen bzw. eingetragenen Warenzeichen sind Eigentum Ihrer rechtmäßigen Eigentümer und dienen hier nur der Geräte-Identifikation. Irrtum und Darstellungsfehler vorbehalten

Working, clean sound and clear pictures.Has issues: HDMI PORT NOT WORKING.Comes with AV Cables.NO REMOTE OR MANUAL.• Plays Back DVD-Video/Audio, SACD-Stereo/Multi-channel, DVD-R/RW, CD, CD-R/RW, SVCD, VCD, MP3, WMAJPEG and DivX Discs• Built-in progressive scan (w/3:2 Pull down)/scaler for 480p, 1080i and 720p Output• Faroudja DCDiTM Processing• 108MHz/12-Bit Video D/A Converter• 192kHz/24-Bit Audio D/A Converters• HDMI Output• Audio EX Mode (Video Off)• Dolby Digital®/DTS Decoder• On Screen Display• Parental Control• Menu Operation From Front Panel• Discrete Power On/Off• Component, S-Video, Composite Outputs • 5.1 ch Analog Audio Output• Stereo Analog Audio Output• Digital Audio Outputs (coaxial, optical)• D-BUS (RC-5 In/Out) Remote Connection

>> marantz DV6600 SACD / CD / DVD Player der Spitzenklasse inkl Original Fernbedienung << Model : marantz DV6600 Made in - Color : Silber Voltage : AC220/240V /50Hz Regional Code 2 ?Geprüft & Getestet | Gewartet und Gereinigt ?Schalter Regler Buttons ?Eject, FF, REW, Prog, Rec, CD/DVD/DivX SACD Playback ?Video & Audio Wiedergabe Lieferung : marantz DV6600 DVD Player mit Fernbedienung • Übernahme Gewährleistung 12 Monate

Working, clean sound and clear pictures.Has issues: HDMI PORT NOT WORKING.Comes with AV Cables.NO REMOTE OR MANUAL.• Plays Back DVD-Video/Audio, SACD-Stereo/Multi-channel, DVD-R/RW, CD, CD-R/RW, SVCD, VCD, MP3, WMAJPEG and DivX Discs• Built-in progressive scan (w/3:2 Pull down)/scaler for 480p, 1080i and 720p Output• Faroudja DCDiTM Processing• 108MHz/12-Bit Video D/A Converter• 192kHz/24-Bit Audio D/A Converters• HDMI Output• Audio EX Mode (Video Off)• Dolby Digital®/DTS Decoder• On Screen Display• Parental Control• Menu Operation From Front Panel• Discrete Power On/Off• Component, S-Video, Composite Outputs • 5.1 ch Analog Audio Output• Stereo Analog Audio Output• Digital Audio Outputs (coaxial, optical)• D-BUS (RC-5 In/Out) Remote Connection

Working, clean sound and clear pictures.Has issues: HDMI PORT NOT WORKING.Comes with AV Cables.NO REMOTE OR MANUAL.• Plays Back DVD-Video/Audio, SACD-Stereo/Multi-channel, DVD-R/RW, CD, CD-R/RW, SVCD, VCD, MP3, WMAJPEG and DivX Discs• Built-in progressive scan (w/3:2 Pull down)/scaler for 480p, 1080i and 720p Output• Faroudja DCDiTM Processing• 108MHz/12-Bit Video D/A Converter• 192kHz/24-Bit Audio D/A Converters• HDMI Output• Audio EX Mode (Video Off)• Dolby Digital®/DTS Decoder• On Screen Display• Parental Control• Menu Operation From Front Panel• Discrete Power On/Off• Component, S-Video, Composite Outputs • 5.1 ch Analog Audio Output• Stereo Analog Audio Output• Digital Audio Outputs (coaxial, optical)• D-BUS (RC-5 In/Out) Remote Connection

Working, clean sound and clear pictures.Has issues: HDMI PORT NOT WORKING.Comes with AV Cables.NO REMOTE OR MANUAL.• Plays Back DVD-Video/Audio, SACD-Stereo/Multi-channel, DVD-R/RW, CD, CD-R/RW, SVCD, VCD, MP3, WMAJPEG and DivX Discs• Built-in progressive scan (w/3:2 Pull down)/scaler for 480p, 1080i and 720p Output• Faroudja DCDiTM Processing• 108MHz/12-Bit Video D/A Converter• 192kHz/24-Bit Audio D/A Converters• HDMI Output• Audio EX Mode (Video Off)• Dolby Digital®/DTS Decoder• On Screen Display• Parental Control• Menu Operation From Front Panel• Discrete Power On/Off• Component, S-Video, Composite Outputs • 5.1 ch Analog Audio Output• Stereo Analog Audio Output• Digital Audio Outputs (coaxial, optical)• D-BUS (RC-5 In/Out) Remote Connection

To whom ever is watching, this is your last chance, soon as my free listings are done, so are these parts. They will get donated to the round file, or to a local audiophile. Get them while you still can. Nuff said. =/ More from the ongoing clean out. Just do not need these drivers anymore, or the controllers, have had them for at least a decade...just sitting in the a/cd walk in closet. =/ Controls include all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD cabinets, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, and or controls, here you go folks. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo driver, made you know where today. =( Shipping will be flat rate. Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers anymore, or the controllers, have had them for at least a decade...just sitting in the a/cd walk in closet. =/ Controls include all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD cabinets, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, and or controls, here you go folks. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo driver, made you know where today. =( Shipping will be flat rate. Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/....Now including the controllers, all six pots, all six knobs, both panels, and all the wiring you see pictured. One price for all of it, including all four mids/drivers/speakers, etc. Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

More from the ongoing clean out. Just do not need these drivers, have had them for at least a decade..just sitting in the closet. =/ Acquired these back when I was restoring my HD550, now they need a new home. These probably fit all of the larger MARANTZ HD series cabinets as far as I can recall. Some of them came from bigger cabinets that I parted out, HD880, etc, etc. The ohms readings are written on the back of the magnets as you can see, took those readings a decade ago. Had a good fluke meter at that time, do not have a working meter presently. Have not tested them as of late, have no reason to believe they have any issues. All my stuff sits in a climate controlled walk in closet when not in use. =) If you need/want some original HD series, VINTAGE mids, here you go folks. Get them now, before they get traded for something else, donated to the local Goodwill, or taken to the curb for the scrap man. Im done looking at them, need them gone asap. Am packing for a move I plan to make within two years, so I am ridding myself of ALL unneeded stuff NOW. =) Here is your chance to have all four VINTAGE MARANTZ drivers, for basically the expense of one Elcheapo, made in you know where today. =( Shipping will be flat rate, I am not taking a bath on shipping these. They will take time to properly package, and Im already basically giving them away at this asking amount. =/ Thanks for stopping to take a look, and as always, have fun EBAYING!!! =)

2-pc - vintage MARANTZ- mid range speakers- removed from HD 770 - marked on back 841-1067-000 excellent clean - tested working- sounds good- light used- clean cones- both have metal surround rings- see pix- ALL offers welcomesee my many other Marantrz speaker - parts - auctions- will combine shipping-

Parting Marantz HD660 Pair - Cabinets & Subs shot, all else good & available!! Grills - good condition. Could use a cleaning. Only one has emblem still and that one has very small tear on bottom. Tweeters - excellent! 1 gold, 1 silver Mids - excellent! Emblems - 1 gold, 1 silver Volume/Sound Adjustments knobs - 4 total Speaker wire inputs - 2 available Sub and Mid speaker metal frames - 2 each available “Square head” hardware all available I hooked them both and everything worked except for the subs (needed foam). Let me know what you need and we’ll work it out. Amplify your life! Thanks for supporting small businesses like mine on eBay! I am a professional refurbisher and dealer of home audio equipment and music media. This is another great listing from Twin City Smitty’s Vintage Audio in New Hope, Minnesota. I’d like to take a moment to recognize that most home audio dealers like me recycle the components that don’t work and are not rare. Please consider the time we put in when purchasing and testing this vintage audio gear (not everything makes it to eBay). I recycle as much as I possibly can from non-repairable components. I have refurbished, tested, and sold hundreds of home audio products. Please see my eBay ratings and feedback and bid/buy with confidence. Please also check my other listings for awesome vintage audio listings. I come across some really fun and unique gear sometimes. If you win this auction, this item will be professionally packaged with care and shipped very quickly via FedEx. I take great pride in providing excellent quality products and getting them to my customers safely. Keep in mind when you consider shipping charges, I have to pay for shipping supplies (as well as the actual logistics costs). As you can see by the pictures, I am a professional with an actual shop and do thoroughly test everything that I sell. I do offer a 30 day guarantee. I just love music and this is a 2nd job (but my true passion). I also purchase large home audio collections. I am a professional liquidator of this equipment and am happy to provide assistance in cleaning out hoards and large collections of home audio equipment. Thanks and God Bless, Shawn (Smitty) Twin City Smitty’s Vintage Audio

Marantz High Definition Speaker System HD660 Speakers. Used the cabinets are in good condition, they are working but the foams need to be replacing. One of the fronts is also loose. Collection only due to size and weight

Parting Marantz HD660 Pair - Cabinets & Subs shot, all else good & available!! Grills - good condition. Could use a cleaning. Only one has emblem still and that one has very small tear on bottom. Tweeters - excellent! 1 gold, 1 silver Mids - excellent! Emblems - 1 gold, 1 silver Volume/Sound Adjustments knobs - 4 total Speaker wire inputs - 2 available Sub and Mid speaker metal frames - 2 each available “Square head” hardware all available I hooked them both and everything worked except for the subs (needed foam). Let me know what you need and we’ll work it out. Amplify your life! Thanks for supporting small businesses like mine on eBay! I am a professional refurbisher and dealer of home audio equipment and music media. This is another great listing from Twin City Smitty’s Vintage Audio in New Hope, Minnesota. I’d like to take a moment to recognize that most home audio dealers like me recycle the components that don’t work and are not rare. Please consider the time we put in when purchasing and testing this vintage audio gear (not everything makes it to eBay). I recycle as much as I possibly can from non-repairable components. I have refurbished, tested, and sold hundreds of home audio products. Please see my eBay ratings and feedback and bid/buy with confidence. Please also check my other listings for awesome vintage audio listings. I come across some really fun and unique gear sometimes. If you win this auction, this item will be professionally packaged with care and shipped very quickly via FedEx. I take great pride in providing excellent quality products and getting them to my customers safely. Keep in mind when you consider shipping charges, I have to pay for shipping supplies (as well as the actual logistics costs). As you can see by the pictures, I am a professional with an actual shop and do thoroughly test everything that I sell. I do offer a 30 day guarantee. I just love music and this is a 2nd job (but my true passion). I also purchase large home audio collections. I am a professional liquidator of this equipment and am happy to provide assistance in cleaning out hoards and large collections of home audio equipment. Thanks and God Bless, Shawn (Smitty) Twin City Smitty’s Vintage Audio