Description
A compact and multifunctional D/A converter with USB compatibilityThe DA-200 is a compact 2-channel PCM D/A converter of the same size as the 200 series (E-200/P-200), equipped with a USB terminal and capable of inputting USB digital audio signals from a PC/Mac, etc. It has a wide range of inputs and outputs, both digital and analog, and can be used as a multifunctional control center that can be enjoyed in a variety of environments, such as PC audio. High-quality sound circuit transplanted from SACD playerThe DAC peripheral circuit and analog output amplifier are equipped with circuits that boast the same scale and sound quality as the SACD player D-05. The DAC chip uses the Burr-Brown PCM1792A, which is well-known for its sound quality, to achieve high-grade sound quality that combines thickness and high resolution. Supports high-resolution sound sourcesThe digital input supports sampling frequencies of 32kHz to 192kHz (USB up to 96kHz) and quantization bit depths of 16bit, 20bit, and 24bit (USB is 16bit, 24bit). It is possible to play not only ripped CD data, but also high-resolution sound sources available through distribution, etc. with high precision. Low clock jitter and D/D converter functionThe input digital data is upsampled to 192kHz by asynchronous processing of the built-in sample rate converter to reduce jitter. It also has a D/D converter function that can connect to an external high-performance D/A converter by through-outputting digital inputs including USB. Built-in headphone amplifier and preamp circuitThe DA-200 can also be used as a powerful, high-quality headphone amplifier. In addition, the preamp that is effective when outputting at a variable level has a built-in full-fledged circuit inherited from the latest integrated amplifier. It is also possible to build a compact system by directly connecting a power amplifier or active speakers. Balanced output terminalEquipped with an XLR balanced output terminal with a fully balanced circuit extracted from the differential output of the DAC chip (only digital input is valid, always fixed output level). Balanced connection with excellent noise resistance performance is possible with high-grade amplifier systems, etc. Sampling frequency display by 7-segment LEDThe front panel is equipped with a large 3-digit 7-segment LED with excellent visibility. It is possible to monitor the sampling frequency of the digital input signal in real time. Adoption of Luxmans traditional high-quality sound technologyLuxmans traditional round pattern board, spiral wrap shield internal wiring, original custom parts, etc. are abundantly used. Various technologies and know-how have been generously invested in achieving high sound quality. Reference power cable includedThe Luxman genuine power cable JPA-10000 with a non-twisted structure aiming for a natural tone is included. The AC inlet is a 3-pin type, realizing stable cable attachment and retention. Supported PC/Mac environmentUSB connection with PC and Mac is compatible with each OS standard driver from Windows XP onwards, Mac OS X onwards, so you can start using it immediately without needing to install drivers or software. Apple, Mac, Mac OS, and Macintosh are registered trademarks or trademarks of Apple, Inc. in the United States. Microsoft and Windows are registered trademarks or trademarks in the United States and other countries. Luxman DA-200 SpecificationsType: 2-channel D/A converterSupported sampling frequencies: COAX/OPT input: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzUSB input: 32kHz, 44.1kHz, 48kHz, 96kHz*16-24bit 2ch PCMDigital input: USB (B type), COAX, OPTDigital output: COAX, OPTAnalog input: 2 unbalancedAnalog output: 1 unbalanced (with fixed/variable output level switch)1 balanced (output level is always fixed, pin 3 HOT)1 headphoneLine input sensitivity/input impedance: 290mV/24k?Line output voltage: Unbalanced: Digital input (fixed output) 2.5V (Variable output) 8.7V, Analog input (fixed output) 290mV (Variable output) 1.0V (Maximum output 10.0V) Balanced: 2.5V Headphone output 130mW+130mW (600?), 80mW+80mW (32?), 40mW+40mW (16?) Line output Impedance Unbalanced: 400?, Balanced: 600? Frequency response Digital input: 2Hz to 60kHz (+0, -3.0dB) Analog input: 3Hz to 130kHz (+0, -3.0dB) Total harmonic distortion Digital input: 0.0009% (unbalanced), 0.0006% (balanced) Analog input: 0.003% (1kHz) S/N ratio (IHF-A) Digital input: 119dB, Analog input: 103dBPower supply voltage AC100V (50/60Hz)Power consumption 11WSize 364 (width) x 81 (height) x 279 (depth) mmWeight 5.1kg
Live search