LINN DIREKTOR PE- AMPLIFIER VOR-VERSTÄRKER Frequenzgang: 20 Hz bis 20 kHz Verstärkung: 12dB (Line) Abmessungen: 320 x 80 x 326 mm MIT FERNBEDIENUNG MIT NETZKABEL WIE ABGEBILDET VOLL FUNKTIONSTÜCHTIG TOPZUSTAND etope 8

Linn Direktor This can be used as an Integrated Amplifier or Multi Room Amplifier within a Linn Knekt system Has been used as a Bedroom amplifier as per display No Remote, Tested & working, please see attached photos Collection in person welcome if required. Or packaged well for posting No returns, I have too many toys. The settings / input names are as they are, if you wanted to change them you’d likely need the services of a Linn dealer so probably best left as it is

Please note: this unit has been designed to be used in conjunction with a Linn Knekt receiver and as part of the Linn HiFi set-up.Fully functional and in good cosmetic condition. An old-school analogue, multi-zone Integrated Amp by Linn, and as is synonymous with this manufacturer, the unit will not disappoint when it comes sound reproduction.A UK power cable will be provided along with the remote. Specifications.Type: Line Receiver / Stereo Power Amplifier / Built-in RCULine level inputs: Input impedance 9kO. Maximum input 5V rmsTape output: Output impedance 100O. Output level = Line input levelMain system input: Balanced audio and communications for connection only to a KnektAudio Output: Variable output with 60dB of gain control range. Maximum gain 12dB. Output impedance 100OInfrared outputs: Constant current modulated drives. Drive level 6mA, carrier frequency range 30-60kHz, internally adjustedLoudspeaker outputs: Output power 25W 4O, 20W 8O, per channelMains input: Switchable for 115V or 230V operation. 100V version availablePower consumption: Idling 5W. Maximum input power 70WProtection: Fully protected against short circuit on loudspeaker outputs and over-heating. Automatic recover after protection shutdown.Fuse Rating: 115V T800mA 230V T400mAMains input voltage: 230V setting: 207Vac to 252Vac. 50/60HzRCU connector: RJ 45 connectorSize: 80 mm (H) x 326 mm (W) x 320 mm (D)Weight: 3.75 kg [eBay code: JK 88 KL]

Please note: this unit has been designed to be used in conjunction with a Linn Knekt receiver and as part of the Linn HiFi set-up.Fully functional and in good cosmetic condition. An old-school analogue, multi-zone Integrated Amp by Linn, and as is synonymous with this manufacturer, the unit will not disappoint when it comes sound reproduction.A UK power cable will be provided along with the remote. Specifications.Type: Line Receiver / Stereo Power Amplifier / Built-in RCULine level inputs: Input impedance 9kO. Maximum input 5V rmsTape output: Output impedance 100O. Output level = Line input levelMain system input: Balanced audio and communications for connection only to a KnektAudio Output: Variable output with 60dB of gain control range. Maximum gain 12dB. Output impedance 100OInfrared outputs: Constant current modulated drives. Drive level 6mA, carrier frequency range 30-60kHz, internally adjustedLoudspeaker outputs: Output power 25W 4O, 20W 8O, per channelMains input: Switchable for 115V or 230V operation. 100V version availablePower consumption: Idling 5W. Maximum input power 70WProtection: Fully protected against short circuit on loudspeaker outputs and over-heating. Automatic recover after protection shutdown.Fuse Rating: 115V T800mA 230V T400mAMains input voltage: 230V setting: 207Vac to 252Vac. 50/60HzRCU connector: RJ 45 connectorSize: 80 mm (H) x 326 mm (W) x 320 mm (D)Weight: 3.75 kg [eBay code: JK 88 KL]

Normal 0 false false false EN-GB X-NONE X-NONE Please note: this unit has been designed to be used in conjunction with a Linn Knekt receiver and as part of the Linn HiFi set-up. Fully functional and in good cosmetic condition. An old-school analogue, multi-zone Integrated Amp by Linn, and as is synonymous with this manufacturer, the unit will not disappoint when it comes sound reproduction. A UK power cable will be provided. Specifications. Type: Line Receiver / Stereo Power Amplifier / Built-in RCU Line level inputs: Input impedance 9kO. Maximum input 5V rms Tape output: Output impedance 100O. Output level = Line input level Main system input: Balanced audio and communications for connection only to a Knekt Audio Output: Variable output with 60dB of gain control range. Maximum gain 12dB. Output impedance 100O Infrared outputs: Constant current modulated drives. Drive level 6mA, carrier frequency range 30-60kHz, internally adjusted Loudspeaker outputs: Output power 25W 4O, 20W 8O, per channel Mains input: Switchable for 115V or 230V operation. 100V version available Power consumption: Idling 5W. Maximum input power 70W Protection: Fully protected against short circuit on loudspeaker outputs and over-heating. Automatic recover after protection shutdown. Fuse Rating: 115V T800mA 230V T400mA Mains input voltage: 230V setting: 207Vac to 252Vac. 50/60Hz RCU connector: RJ 45 connector Size: 80 mm (H) x 326 mm (W) x 320 mm (D) Weight: 3.75 kg [eBay code: JK 57 KL]

Linn Multi-Room System - 1x Intersekt, 3x Direktor, RCU - With Programming Tools Condition is as Seen in Pictures of the actual items for sale. Fully Tested, Serviced and Cleaned using Servisol Super 10 Switch and Contact Cleaner Shown Working in Windows 10 using Linstall 2.16 Software (See Pictures) Package contents 1x Linn Intersekt 8x8 - Tested Working (See Pictures) 3x Linn Direktor - Full Complete Units- Tested Working (See Pictures) 1x Handmade D9 - RJ12 PC to Intersekt Programming Cable - Tested Working 1x Handmade Flip switched Ethernet Cable - Intersekt to Direktor/RCU Programming Cable - Tested Working 1x HP Compaq NC8000 Laptop (Fresh, Clean, Updated Windows XP SP3)(No Lid/Screen) with PSU for Programming the System - Tested Working 1x CD With various version of Linstall along with very rare Knekt Holy Grail Linn documentation, including cable schematics etc 2x RCU Wall Units, 1x working, 1x non working 12x BNC Speaker plugs for connecting to Linn Direktors 1x Handmade Knekt Knife Unlike other ebay Listings, these Linn Direktors are complete Units, they include internal RCU units along with Balance Line Recievers and Power Amps These Direktor Units can be used in a multitude of ways 1. As part of a multiroom system that allows the Direktor to be located in a remote room and control the main Audio system that is set up in the Main Room, controlling 8 remote sources along with 3 internal line inputs. 2. As a Standalone 3 line input Integrated amplifier 3.. As a Standalone 3 line input Pre-amplifier, or part of a multiroom setup that uses seperate Power Amplifier 4. As a Standalone Power amplifier Sale is Cash on Collection Only, No Using Paypal I was forced to add the option !! Price Is Firm, May consider P/X but only from reputable dealers I will be happy to teach the new owner how to program these units from the floor up, to a specification that suits their existing home sources If you have any questions, please feel free to ask, anyone asking if I can supply them with the Linstall Software/Documentation will be ignored and added to my block list, so do not ask as rejection often offends. International Buyers should feel free to contact me to arrange Overseas Postage costs, if required. *** Thank you for looking at my listings.***

Please note: this unit has been designed to be used in conjunction with a Linn Knekt receiver and as part of the Linn HiFi set-up.Fully functional and in good cosmetic condition. An old-school analogue, multi-zone Integrated Amp by Linn, and as is synonymous with this manufacturer, the unit will not disappoint when it comes sound reproduction.A UK power cable will be provided along with the remote. Specifications.Type: Line Receiver / Stereo Power Amplifier / Built-in RCULine level inputs: Input impedance 9kO. Maximum input 5V rmsTape output: Output impedance 100O. Output level = Line input levelMain system input: Balanced audio and communications for connection only to a KnektAudio Output: Variable output with 60dB of gain control range. Maximum gain 12dB. Output impedance 100OInfrared outputs: Constant current modulated drives. Drive level 6mA, carrier frequency range 30-60kHz, internally adjustedLoudspeaker outputs: Output power 25W 4O, 20W 8O, per channelMains input: Switchable for 115V or 230V operation. 100V version availablePower consumption: Idling 5W. Maximum input power 70WProtection: Fully protected against short circuit on loudspeaker outputs and over-heating. Automatic recover after protection shutdown.Fuse Rating: 115V T800mA 230V T400mAMains input voltage: 230V setting: 207Vac to 252Vac. 50/60HzRCU connector: RJ 45 connectorSize: 80 mm (H) x 326 mm (W) x 320 mm (D)Weight: 3.75 kg [eBay code: JK 88 KL]

Normal 0 false false false EN-GB X-NONE X-NONE Please note: this unit has been designed to be used in conjunction with a Linn Knekt receiver and as part of the Linn HiFi set-up. Fully functional and in good cosmetic condition. An old-school analogue, multi-zone Integrated Amp by Linn, and as is synonymous with this manufacturer, the unit will not disappoint when it comes sound reproduction. A UK power cable will be provided. Specifications. Type: Line Receiver / Stereo Power Amplifier / Built-in RCU Line level inputs: Input impedance 9kO. Maximum input 5V rms Tape output: Output impedance 100O. Output level = Line input level Main system input: Balanced audio and communications for connection only to a Knekt Audio Output: Variable output with 60dB of gain control range. Maximum gain 12dB. Output impedance 100O Infrared outputs: Constant current modulated drives. Drive level 6mA, carrier frequency range 30-60kHz, internally adjusted Loudspeaker outputs: Output power 25W 4O, 20W 8O, per channel Mains input: Switchable for 115V or 230V operation. 100V version available Power consumption: Idling 5W. Maximum input power 70W Protection: Fully protected against short circuit on loudspeaker outputs and over-heating. Automatic recover after protection shutdown. Fuse Rating: 115V T800mA 230V T400mA Mains input voltage: 230V setting: 207Vac to 252Vac. 50/60Hz RCU connector: RJ 45 connector Size: 80 mm (H) x 326 mm (W) x 320 mm (D) Weight: 3.75 kg [eBay code: JK 57 KL]

Normal 0 false false false EN-GB X-NONE X-NONE Please note: this unit has been designed to be used in conjunction with a Linn Knekt receiver and as part of the Linn HiFi set-up. Fully functional and in good cosmetic condition. An old-school analogue, multi-zone Integrated Amp by Linn, and as is synonymous with this manufacturer, the unit will not disappoint when it comes sound reproduction. A UK power cable will be provided. Specifications. Type: Line Receiver / Stereo Power Amplifier / Built-in RCU Line level inputs: Input impedance 9kO. Maximum input 5V rms Tape output: Output impedance 100O. Output level = Line input level Main system input: Balanced audio and communications for connection only to a Knekt Audio Output: Variable output with 60dB of gain control range. Maximum gain 12dB. Output impedance 100O Infrared outputs: Constant current modulated drives. Drive level 6mA, carrier frequency range 30-60kHz, internally adjusted Loudspeaker outputs: Output power 25W 4O, 20W 8O, per channel Mains input: Switchable for 115V or 230V operation. 100V version available Power consumption: Idling 5W. Maximum input power 70W Protection: Fully protected against short circuit on loudspeaker outputs and over-heating. Automatic recover after protection shutdown. Fuse Rating: 115V T800mA 230V T400mA Mains input voltage: 230V setting: 207Vac to 252Vac. 50/60Hz RCU connector: RJ 45 connector Size: 80 mm (H) x 326 mm (W) x 320 mm (D) Weight: 3.75 kg [eBay code: JK 57 KL]

Linn Multi-Room System - 1x Intersekt, 3x Direktor, RCU - With Programming Tools Condition is as Seen in Pictures of the actual items for sale. Fully Tested, Serviced and Cleaned using Servisol Super 10 Switch and Contact Cleaner Shown Working in Windows 10 using Linstall 2.16 Software (See Pictures) Package contents 1x Linn Intersekt 8x8 - Tested Working (See Pictures) 3x Linn Direktor - Full Complete Units- Tested Working (See Pictures) 1x Handmade D9 - RJ12 PC to Intersekt Programming Cable - Tested Working 1x Handmade Flip switched Ethernet Cable - Intersekt to Direktor/RCU Programming Cable - Tested Working 1x HP Compaq NC8000 Laptop (Fresh, Clean, Updated Windows XP SP3)(No Lid/Screen) with PSU for Programming the System - Tested Working 1x CD With various version of Linstall along with very rare Knekt Holy Grail Linn documentation, including cable schematics etc 2x RCU Wall Units, 1x working, 1x non working 12x BNC Speaker plugs for connecting to Linn Direktors 1x Handmade Knekt Knife Unlike other ebay Listings, these Linn Direktors are complete Units, they include internal RCU units along with Balance Line Recievers and Power Amps These Direktor Units can be used in a multitude of ways 1. As part of a multiroom system that allows the Direktor to be located in a remote room and control the main Audio system that is set up in the Main Room, controlling 8 remote sources along with 3 internal line inputs. 2. As a Standalone 3 line input Integrated amplifier 3.. As a Standalone 3 line input Pre-amplifier, or part of a multiroom setup that uses seperate Power Amplifier 4. As a Standalone Power amplifier Sale is Cash on Collection Only, No Using Paypal I was forced to add the option !! Price Is Firm, May consider P/X but only from reputable dealers I will be happy to teach the new owner how to program these units from the floor up, to a specification that suits their existing home sources If you have any questions, please feel free to ask, anyone asking if I can supply them with the Linstall Software/Documentation will be ignored and added to my block list, so do not ask as rejection often offends. International Buyers should feel free to contact me to arrange Overseas Postage costs, if required. *** Thank you for looking at my listings.***

Normal 0 false false false EN-GB X-NONE X-NONE Please note: this unit has been designed to be used in conjunction with a Linn Knekt receiver and as part of the Linn HiFi set-up. Fully functional and in good cosmetic condition. An old-school analogue, multi-zone Integrated Amp by Linn, and as is synonymous with this manufacturer, the unit will not disappoint when it comes sound reproduction. A UK power cable will be provided. Specifications. Type: Line Receiver / Stereo Power Amplifier / Built-in RCU Line level inputs: Input impedance 9kO. Maximum input 5V rms Tape output: Output impedance 100O. Output level = Line input level Main system input: Balanced audio and communications for connection only to a Knekt Audio Output: Variable output with 60dB of gain control range. Maximum gain 12dB. Output impedance 100O Infrared outputs: Constant current modulated drives. Drive level 6mA, carrier frequency range 30-60kHz, internally adjusted Loudspeaker outputs: Output power 25W 4O, 20W 8O, per channel Mains input: Switchable for 115V or 230V operation. 100V version available Power consumption: Idling 5W. Maximum input power 70W Protection: Fully protected against short circuit on loudspeaker outputs and over-heating. Automatic recover after protection shutdown. Fuse Rating: 115V T800mA 230V T400mA Mains input voltage: 230V setting: 207Vac to 252Vac. 50/60Hz RCU connector: RJ 45 connector Size: 80 mm (H) x 326 mm (W) x 320 mm (D) Weight: 3.75 kg [eBay code: JK 57 KL]