This item was gifted to me by a relative as it was no longer working after many years of use and they wanted me to try to repair it. It does not power on and the repair methods I saw online seemed too complex for me. No guarantees that repairs will make it work again but there is a chance! Replacing this was something I am not comfortable with, but if you are, feel free to purchase as it is a great device when working. Only the device will be included in the sale. Message me with any questions or offers you have.

In very good condition Working tested Comes with remote From a clean pet free pest-free smoke-free environment Well packed and shipped FedEx ground Local pick up also available and encouraged

Received this item from a relative as they no longer had a need for it. Realized I do not need it as well and really have no way to test it other than plugging into power. Boots to standby mode (red light on power) but have no way to test its actual capabilities. Comes as is, buy if you know what you are buying. Comes with just the amp and the normal 125V power cord. I will try my best to answer any questions so feel free to reach out! My loss is your gain!

Received this item from a relative as they no longer had a need for it. Realized I do not need it as well and really have no way to test it other than plugging into power. Boots to standby mode (red light on power) but have no way to test its actual capabilities. Comes as is, buy if you know what you are buying. Comes with just the amp and the normal 125V power cord. I will try my best to answer any questions so feel free to reach out! My loss is your gain!

The Lexicon NT 212 Power Amplifier is made by Bryston in Canada and is the same as their 3B ST. This is a stereo amp, with each channel rated at 120 watts @ 8 Ohms and 200 watts @ 4 Ohms. Each channel has both RCA and balanced connections with a switch to determine which input you wish to use. The amplifier is THX certified. All channels tested & sounding great. One rear fin is slightly bent. All surfaces are in excellent condition. Please note that this amp will mildly cough for a while (up to 90 seconds) through the speakers after it is turned off. I have spoken to Bryston about this, and was assured that this was common in this series of Bryston amps, that I was just hearing the caps discharge, and there was no electronic problem or threat to speakers. This is the exact same amp as a Bryston 3B ST, just rebranded by Lexicon. It is truly an incredible sounding amp. If youre looking for a Bryston on the cheap, look no further. Includes power cord.

This is my second refurbished Lexicon MC-8 VER. 2 (Mic Board) that Im using as a spare part machine due to a bad power supply. I was going to order an new one but never got around to it. Doubt I ever will at this point. So I was keeping it with my other MC8 Ver. 2 that has a new power supply just in case I needed parts. Since I have an MC12 & MC12HD, I hardly use the MC8 even though I like the MC8s 5.1 switching which the MC12 doesnt have. So I have decided to part with it. Im thinking someone is interested in it as an MC8 ver. 2 upgrade but its a whole lot more than that. What it has1) Battery modification with new battery (See Photo). I removed the old battery and added a battery socket and installed a new battery.2) New Display. I found a source for the original displays and I bought them all. I replaced all the displays in my Lexicons. I sold off the old displays here on eBay for $50 each awhile back.3) Has the latest and greatest firmware on the firmware board thats next to the battery(See photo). Ill include all the Docs and firmware upgrades for the MC8 on a CD. 4) Has the RARE Ver. 2 Mic Board installed (See Photos). You just cant find them on eBay anymore! Thats one of the reasons I was keeping this unit. What it doesnt have1) Remote. Im keeping that as Im selling this as a Ver 2 Upgrade. Needed for setup. 2) Feet and Ears. I dont have the feet for this unit as it was rack mounted at one time. Also dont have the ears.3) Bottom cover plate for Balanced option. This unit originally came with the balanced option but I sold that upgrade off awhile back.4) Docs & Box. Im keeping the manual and box for my other unit.5) Working power supply. The one pictured comes with unit but do not use. I wanted to replace caps but these things are very difficult to work on. Its better to get a new one anyway. So power supply does not work. If youre looking for a refurbish MC-8 that will be like new then you will have to order a new power supply and remote. If youre looking for an MC8 upgrade for your MC8 Ver 1 then all you need to do is install the Mic board and firmware board into yours. I personally would just put in the power supply from your unit into this one as you get a new battery and display with this one. Then you can sell off yours to recovery the money spent for the upgrade. Im sticking with my price as I rather keep it for Oppo 5.1 SACD & DVD Audio analog switching if not for anything else. I have a Sony preamp that only does just that and it goes for BIG bucks. A lot of people dont realize that the MC8 can do 5.1 switching whereas the MC12 cannot. If it werent for the optional MC12 EQ card I would like the MC8 Ver 2 better. Im selling this unit as Upgrade parts! Upgrading and installing a new power supply does take some knowledge but just about anyone can do it as its pretty much plug and play. As with any upgrade its sold as is for parts. Attempt at your own risk. Please fell free to ask questions. Ill do my best to answer.

The Lexicon NT 312 Power Amplifier is made by Bryston in Canada and is the same as their 5B ST. There are three channels each rated at 120 watts @ 8 Ohms and 200 watts @ 4 Ohms. Each channel has both RCA and balanced connections with a switch to determine which input you wish to use. The amplifier is THX certified. All channels tested & sounding great. Some scratches on top panel, but all other surfaces are in excellent condition. Please note that this amp will cough for a while (up to 90 seconds) through the speakers after it is turned off. I have spoken to Bryston about this, and was assured that this was common in this series of Bryston amps, that I was just hearing the caps discharge, and there was no electronic problem or threat to speakers. This is the exact same amp as a Bryston 5B ST, just rebranded by Lexicon. It is truly an incredible sounding amp. If youre looking for a Bryston on the cheap, look no further. Includes power cord.

this is an excellent working preamp processor. this was sent back to the factory for Both updates. this included DTS as well as THX Ultra. i have seen some of these on ebay that have the DTS upgrade but have seen none that include the THX Ultra. this unit comes in its original box and original remote.

Please read!!! Lexicon CP-2 120 volts Selling for parts, not working properly. I dont know what the problem is Selling AS IS no reserve flat shipping rate for Canada and USA: 38$

Please read!!! Lexicon CP-2 120 volts Selling for parts, not working properly. I dont know what the problem is Selling AS IS no reserve flat shipping rate for Canada and USA: 38$

Please read!!! Lexicon CP-2 120 volts Selling for parts, not working properly. I dont know what the problem is Selling AS IS no reserve flat shipping rate for Canada and USA: 38$

Please read!!! Lexicon CP-2 120 volts Selling for parts, not working properly. I dont know what the problem is Selling AS IS no reserve flat shipping rate for Canada and USA: 38$

Please read!!! Lexicon CP-2 120 volts Selling for parts, not working properly. I dont know what the problem is Selling AS IS no reserve flat shipping rate for Canada and USA: 38$

Lexicon DD-8 eight channel power amplifier. Powers on (power button goes from red to blue) and all eight blue LEDs come on for each channel. No Sound Output - SOLD AS-IS.

This is my second refurbished Lexicon MC-8 VER. 2 (Mic Board) that Im using as a spare part machine due to a bad power supply. I was going to order an new one but never got around to it. Doubt I ever will at this point. So I was keeping it with my other MC8 Ver. 2 that has a new power supply just in case I needed parts. Since I have an MC12 & MC12HD, I hardly use the MC8 even though I like the MC8s 5.1 switching which the MC12 doesnt have. So I have decided to part with it. Im thinking someone is interested in it as an MC8 ver. 2 upgrade but its a whole lot more than that. What it has1) Battery modification with new battery (See Photo). I removed the old battery and added a battery socket and installed a new battery.2) New Display. I found a source for the original displays and I bought them all. I replaced all the displays in my Lexicons. I sold off the old displays here on eBay for $50 each awhile back.3) Has the latest and greatest firmware on the firmware board thats next to the battery(See photo). Ill include all the Docs and firmware upgrades for the MC8 on a CD. 4) Has the RARE Ver. 2 Mic Board installed (See Photos). You just cant find them on eBay anymore! Thats one of the reasons I was keeping this unit. What it doesnt have1) Remote. Im keeping that as Im selling this as a Ver 2 Upgrade. Needed for setup. 2) Feet and Ears. I dont have the feet for this unit as it was rack mounted at one time. Also dont have the ears.3) Bottom cover plate for Balanced option. This unit originally came with the balanced option but I sold that upgrade off awhile back.4) Docs & Box. Im keeping the manual and box for my other unit.5) Working power supply. The one pictured comes with unit but do not use. I wanted to replace caps but these things are very difficult to work on. Its better to get a new one anyway. So power supply does not work. If youre looking for a refurbish MC-8 that will be like new then you will have to order a new power supply and remote. If youre looking for an MC8 upgrade for your MC8 Ver 1 then all you need to do is install the Mic board and firmware board into yours. I personally would just put in the power supply from your unit into this one as you get a new battery and display with this one. Then you can sell off yours to recovery the money spent for the upgrade. Im sticking with my price as I rather keep it for Oppo 5.1 SACD & DVD Audio analog switching if not for anything else. I have a Sony preamp that only does just that and it goes for BIG bucks. A lot of people dont realize that the MC8 can do 5.1 switching whereas the MC12 cannot. If it werent for the optional MC12 EQ card I would like the MC8 Ver 2 better. Im selling this unit as Upgrade parts! Upgrading and installing a new power supply does take some knowledge but just about anyone can do it as its pretty much plug and play. As with any upgrade its sold as is for parts. Attempt at your own risk. Please fell free to ask questions. Ill do my best to answer.

Rare Vintage Lexicon Varispeech II. Powers Up, As Is For Parts. Read . It powers up as shown in the photos but nothing moves. Sold as is for parts. Only the shown parts are included. No return is accepted. Sold for parts

This is my second refurbished Lexicon MC-8 VER. 2 (Mic Board) that Im using as a spare part machine due to a bad power supply. I was going to order an new one but never got around to it. Doubt I ever will at this point. So I was keeping it with my other MC8 Ver. 2 that has a new power supply just in case I needed parts. Since I have an MC12 & MC12HD, I hardly use the MC8 even though I like the MC8s 5.1 switching which the MC12 doesnt have. So I have decided to part with it. Im thinking someone is interested in it as an MC8 ver. 2 upgrade but its a whole lot more than that. What it has1) Battery modification with new battery (See Photo). I removed the old battery and added a battery socket and installed a new battery.2) New Display. I found a source for the original displays and I bought them all. I replaced all the displays in my Lexicons. I sold off the old displays here on eBay for $50 each awhile back.3) Has the latest and greatest firmware on the firmware board thats next to the battery(See photo). Ill include all the Docs and firmware upgrades for the MC8 on a CD. 4) Has the RARE Ver. 2 Mic Board installed (See Photos). You just cant find them on eBay anymore! Thats one of the reasons I was keeping this unit. What it doesnt have1) Remote. Im keeping that as Im selling this as a Ver 2 Upgrade. Needed for setup. 2) Feet and Ears. I dont have the feet for this unit as it was rack mounted at one time. Also dont have the ears.3) Bottom cover plate for Balanced option. This unit originally came with the balanced option but I sold that upgrade off awhile back.4) Docs & Box. Im keeping the manual and box for my other unit.5) Working power supply. The one pictured comes with unit but do not use. I wanted to replace caps but these things are very difficult to work on. Its better to get a new one anyway. So power supply does not work. If youre looking for a refurbish MC-8 that will be like new then you will have to order a new power supply and remote. If youre looking for an MC8 upgrade for your MC8 Ver 1 then all you need to do is install the Mic board and firmware board into yours. I personally would just put in the power supply from your unit into this one as you get a new battery and display with this one. Then you can sell off yours to recovery the money spent for the upgrade. Im sticking with my price as I rather keep it for Oppo 5.1 SACD & DVD Audio analog switching if not for anything else. I have a Sony preamp that only does just that and it goes for BIG bucks. A lot of people dont realize that the MC8 can do 5.1 switching whereas the MC12 cannot. If it werent for the optional MC12 EQ card I would like the MC8 Ver 2 better. Im selling this unit as Upgrade parts! Upgrading and installing a new power supply does take some knowledge but just about anyone can do it as its pretty much plug and play. As with any upgrade its sold as is for parts. Attempt at your own risk. Please fell free to ask questions. Ill do my best to answer.

Rare Vintage Lexicon Varispeech II. Powers Up, As Is For Parts. Read . It powers up as shown in the photos but nothing moves. Sold as is for parts. Only the shown parts are included. No return is accepted. Sold for parts

** Please Read ** Only 3 of the 5 channels are working and remote turn on does not seem to work. I have owned this amp for about 8 years and have been using it for my surround Atmos speakers. I contacted Bryston and they will go through the amplifier for ~ $1000 + shipping. However, I added another pair of Atmos speakers and needed a 6-channel amp so I decided to go in a different direction. The amp was rack mounted and does NOT come with feet. I do not have the original box but it will be shipped double boxed in an Anthem Amplifier box. Please let me know if any questions.

This is revision of a previous ad as some of the items were sold.TERMS-Pickup in Santa Barbara, CA (no shipping or delivery)-Also for sale on USAM, potentially for a lower price, so this listing is subject to prior sale -The original MSRP for all items below was $30,575-Blue Book value is over $6,000, not including the Lexicon -Audiogon Blue Book for the Martin Logans alone is $2,271-Some items pictured are NOT included, please refer to complete list below-No haggling and no warranty-Must have two people and truck to transportMARTIN LOGAN REQUEST Hybrid Electrostatic loudspeakers, serial #REIC-006 and -007. Panels were replaced in 2018 ($2,250) and are like new/mint. Woofers are original and excellent. Natural oak trim pieces are near mint. Grille cloth has minor holes and fraying not particularly noticeable from listening position. Martin Logan emblems are fairly worn. Bi-wire terminal jumpers are not original but fine. Original retail price was $4,500-$4,800; Audiogon Blue Book average (for all conditions) is $2,271 (without new panels considered).HALES SYSTEM TWO SIGNATURE loudspeakers in walnut veneer with original outboard crossovers. Stereophile Class B component and editor Robert Harleys long term reference. Drivers are perfect and the speakers sound phenomenal. Cabinets are in fair/poor condition with numerous scuffs and scratches. Grill cloth is worn and loose. Crossovers are in great shape. Listen to them as they are for reference quality sound, or refinish them to new condition. Original retail price was $5,900; Audiogon Blue Book average is $1,734.TRIAD IN-ROOM LCR speakers. Near mint. Drivers are flawless. Originally $1,850 per pair, average Blue Book price is $606.39.REVEL CONCERTA B12 subwoofer. Driver is perfect, but plate amp is fried (will include it). Either needs the amp repaired or replaced, or an external amp. Originally $1,000.SPICA TC-50 loudspeakers, serial #3214 A and B, in walnut veneer with ultra rare Kinergetics Music Mate stands. Drivers are perfect. Cabinets show scattered signs of age but no major dings, dents, or scratches. Grille frames are free of any cracks and all pegs are intact. Grille cloth is clean with original Spica emblems. Kinergetics stands are fully functional but in just fair/poor condition with several chips in the black wood bases. No original spikes but after market spikes can be used. Spicas were originally $550 and stands were originally $250; Audiogon Blue Book average (for all conditions) is $309.66 for the TC-50s alone without stands.MIRAGE M-490 loudspeakers. Black ash finish. Drivers and grilles are perfect. Stereophile Class C recommended component, originally $600, Audiogon Blue Book average is $298.33. LEXICON MC-12HD Music and Cinema Processor. Power cuts in and out, likely needs new power supply. Originally $14,000. Connectivity is now dated but if repaired would make a very high end preamp or processor. RUSSOUND AP-48 8-channel power amplifiers (pair). Work perfectly. Originally $950 each. Blue Book is $278.83 each.

Lexicon MC-8 Digital Controller 7.1 XLR Balanced Outputs Tested Audiophile READ eBay Listing: Lexicon MC-8 Digital Controller overview Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] READ ****Excellent Cosmetic Condition - we are working on procuring a remote and XLR cables to test the remaining outputs - so far everything works with one Caveat - the volume will only decrease from its set position - I am hoping this is some type of Setting but I wont have further clarity until I can get a remote to access the menus and factory reset this. Remote arrives 3/25 - I will update the listing accordingly UPDATE 4/10/24 : WE have a remote and have tested it with an XLR Amplifier - the volume works from the remote however it is an off brand remote and has limited functionality - we have tested all the zone 1 and zone 2 inputs out outputs and all the XLR outputs with no issue This unit has rack mount brackets on it, they will be removed for shipping. All the lights work - we have photos of the circuit board - in one photo you can see a red light on the circuit the board - this is an indicator that the front power button is powered off but the main power is on. This currently is running V 1.0 - there is a free 2.0 upgrade available but I dont have a windows computer or running parallels to upgrade it.

Lexicon MC-8 Digital Controller 7.1 XLR Balanced Outputs Tested Audiophile READ READ ****Excellent Cosmetic Condition - we are working on procuring a remote and XLR cables to test the remaining outputs - so far everything works with one Caveat - the volume will only decrease from its set position - I am hoping this is some type of Setting but I wont have further clarity until I can get a remote to access the menus and factory reset this. Remote arrives 3/25 - I will update the listing accordingly UPDATE 4/10/24 : WE have a remote and have tested it with an XLR Amplifier - the volume works from the remote however it is an off brand remote and has limited functionality - we have tested all the zone 1 and zone 2 inputs out outputs and all the XLR outputs with no issue This unit has rack mount brackets on it, they will be removed for shipping. All the lights work - we have photos of the circuit board - in one photo you can see a red light on the circuit the board - this is an indicator that the front power button is powered off but the main power is on. This currently is running V 1.0 - there is a free 2.0 upgrade available but I dont have a windows computer or running parallels to upgrade it.

Lexicon MC-8 Digital Controller 7.1 XLR Balanced Outputs Tested Audiophile READ READ ****Excellent Cosmetic Condition - we are working on procuring a remote and XLR cables to test the remaining outputs - so far everything works with one Caveat - the volume will only decrease from its set position - I am hoping this is some type of Setting but I wont have further clarity until I can get a remote to access the menus and factory reset this. Remote arrives 3/25 - I will update the listing accordingly UPDATE 4/10/24 : WE have a remote and have tested it with an XLR Amplifier - the volume works from the remote however it is an off brand remote and has limited functionality - we have tested all the zone 1 and zone 2 inputs out outputs and all the XLR outputs with no issue This unit has rack mount brackets on it, they will be removed for shipping. All the lights work - we have photos of the circuit board - in one photo you can see a red light on the circuit the board - this is an indicator that the front power button is powered off but the main power is on. This currently is running V 1.0 - there is a free 2.0 upgrade available but I dont have a windows computer or running parallels to upgrade it.

Lexicon MC-8 Digital Controller 7.1 XLR Balanced Outputs Tested Audiophile READ READ ****Excellent Cosmetic Condition - we are working on procuring a remote and XLR cables to test the remaining outputs - so far everything works with one Caveat - the volume will only decrease from its set position - I am hoping this is some type of Setting but I wont have further clarity until I can get a remote to access the menus and factory reset this. Remote arrives 3/25 - I will update the listing accordingly This unit has rack mount brackets on it, they will be removed for shipping. All the lights work - we have photos of the circuit board - in one photo you can see a red light on the circuit the board - this is an indicator that the front power button is powered off but the main power is on. This currently is running V 1.0 - there is a free 2.0 upgrade available but I dont have a windows computer or running parallels to upgrade it.