Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Up for sale a perfect working ML-1 preamp power supply PLS-150 with an upgrade/ toggle switch see pictures. Im not the original owner. It was the original owner that had the preamp power supply modification done. It looks clean and in my opinion is perfect. Preamp from what the original owner stated is its set up to play MM and MC for the phono section. I never verified that being I only have a MM carriage. Preamp is clean a few cosmetics see pics. Preamp feet are missing because it came with the wood case. The case was sold to a friend. I like the open clean look of the ml-1 not a fan of the wood box. Im adding 4 isolation feat. See pics. Umbilical cord on one end shows it pulled away see pics from Fischer connector has no bearing on its function its just cosmetic. No original box, comes with power cord and a couple of camac connectors. Unit will be packed like a tank for safe arrival. Selling only because I have 3 other preamps and sadly one has to go. You wont be disappointed in this classic that never dies.Levinson vintage is my favorite audio. Thanks for considering price is fair compared to the others on eBay asking way to much in my opinion. Also free shipping, Cheers.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 preamp Original modules. Tested and everything appears to working well. Please note that due to the nature of vintage electronics, we cannot make any guarantees to its full functionality. There are no returns or refunds. Please review photos carefully and ask any questions before bidding. Thank you.

Mark Levinson LNC-2 Frequency Dividing NetworkCrossover : 250Hz 110V INPUT from JAPAN Our price is 100% negotiable! The price only means ASK!Please make an offer and we will give you the best price! Payment PayPal ONLY. Please pay within 5 days after auction is finished. Shipping We ONLY ship to buyers Paypal registered address. ReturnsItems that are faulty beyond the description given on our auction site should be returned for a full refund.Please contact us by e-mail if items delivered are faulty. However, please send the item back to us. About usOur product is 100% authentic! We dispatch items from Japan. We provide our goods and services based on our motto “Your complete satisfaction is our ultimate goal”. Therefore, please rest assured and make your bid with ease. Please Note International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior.

Mark Levinson ML-1 preamp Original modules. Tested and everything appears to working well. Please note that due to the nature of vintage electronics, we cannot make any guarantees to its full functionality. There are no returns or refunds. Please review photos carefully and ask any questions before bidding. Thank you.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

This is a set of Mark Levinson 33H amps, designed to deliver high-quality audio performance. The brand is known for its exceptional attention to detail and craftsmanship, ensuring that each component of the amps is carefully chosen and tuned for optimal sound quality. The amps belong to the category of amplifiers and preamps, which are essential for delivering powerful and clear sound to your home audio system. Whether you're a music enthusiast, a movie buff, or a gamer, these amps are sure to enhance your listening experience. The amps are in good working order and ready to be connected to your speakers. These amps have not been re-capped as Levinson has reported no history of output caps ever failing. Flat shipping charge includes handling and insurance. Specifications Description:Solid-state monoblock power amplifier. Rated continuous-power outputs: 150W into 8 ohms (21.8dBW), 300W into 4 ohms (21.8dBW), 600W into 2 ohms (21.8dBW), 1200W into 1 ohm (21.8dBW). Frequency response: 20Hz-20kHz, <0.5% THD. S/N ratio: better than 80dB (ref. 1W), better than 105dB (ref. full output). Input impedance: 100k ohms balanced, 50k ohms unbalanced. Output impedance: <0.05 ohms, 20Hz-20kHz. Damping factor: greater than 800 at 20Hz. Input sensitivity: 130mV for 2.83V output, 1.59V for full-rated output. Voltage gain: 26.8dB. Typical power consumption: 540W ±5% at idle, 210W ±5% in standby. Mains voltages: 100V, 120V, 200V, 210V, 220V, 230V, or 240V AC mains operation at 50 or 60Hz, set at factory. Dimensions: 11 (279mm) W by 18.5 (470mm) H by 22.88 (581mm) D. Shipping weight: 220 lbs. each.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Sie bieten auf o.g. Preisliste. Privat-Verkauf, d.h. keine Garantie ,keine Rückgabe , kein Umtausch

Items marked as standard shipping can also be delivered by express delivery, so please contact us. We are a Japanese antique dealer company.Japan antique dealer number: 921060000398We only sell authentic products, so please buy with confidence.Description In 2003, Mark Levinson released a slim body mono power amplifier from RED ROSE MUSIC.It is complete and exquisite with no noticeable damage to the appearance.AC cable included Maintained at a cost of 14,850 yen in November 2023. << Product Specifications >> Output: 50W (8?), 100W (4?)Frequency response: 20Hz~20kHz ±0.5dBInput impedance: 47 k?Input sensitivity: 0.4VInput terminal: Unbalanced RCA x 1Dimensions & Weight: 70W x 134H x 445D mm 4.5kg / 1 unit ShippingWe do not accept returns, so please contact us with any questions before purchasing!Handling time is set longer just in case, but we will ship in the shortest possible time. We always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Thank you for your understanding.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Sie bieten auf o.g. Preisliste. Privat-Verkauf, d.h. keine Garantie ,keine Rückgabe , kein Umtausch

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson LNC-2 Frequency Dividing NetworkCrossover : 250Hz 110V INPUT from JAPAN Our price is 100% negotiable! The price only means ASK!Please make an offer and we will give you the best price! Payment PayPal ONLY. Please pay within 5 days after auction is finished. Shipping We ONLY ship to buyers Paypal registered address. ReturnsItems that are faulty beyond the description given on our auction site should be returned for a full refund.Please contact us by e-mail if items delivered are faulty. However, please send the item back to us. About usOur product is 100% authentic! We dispatch items from Japan. We provide our goods and services based on our motto “Your complete satisfaction is our ultimate goal”. Therefore, please rest assured and make your bid with ease. Please Note International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior.