Elevate your home theater experience with the Klipsch RW-8 subwoofer. This powerful and compact subwoofer boasts a driver size of 8 inches and a maximum RMS power of 125 watts, delivering deep, rich bass to your favorite movies and music. The subwoofer is housed in a sleek black wood material and has a rectangular shape that blends seamlessly into any room. With stereo L/R RCA and banana jack audio inputs, connecting the subwoofer to your audio system is a breeze. The Klipsch RW-8 subwoofer has been used and tested for quality assurance, ensuring that it will perform at its best in your home theater setup. Add this subwoofer to your system and take your audio experience to the next level.

Ceiling speakers: Armed with explosive dynamics that wont disrupt your homes decor, the THX® Ultra2-certified KL-7502-THX in-ceiling speaker creates realistic audio experiences that rival those found in large movie theaters and concert halls.Perfect for left center or right channel useMakes a great back channel surroundBrings superior sound to larger roomsDelivers a uniform coverage patternMaximum installation reliabilityMix and match with our other THX Ultra2 modelsThese top-of-the-line in-ceiling LCR speaker the KL-7502-THX uses highly respected certification patented technology and premium materials to deliver compelling audio experiences that are second to none. In fact most in-ceiling speakers can’t “fool” listeners into believing the sound is coming directly at them rather than from above. But that’s not a problem for the KL-7502-THX as it offers articulate detail powerful impact and excellent localization.The KL-7502-THX employs dual 5.25-inch Cerametallic woofers that operate in an enclosed tuned-port chamber. These exclusive woofer cones offer superb damping characteristics that will not flex or resonate at frequencies within the drivers’ operating ranges resulting in consistent bass response regardless of the installation or ceiling air space.A 1-inch titanium tweeter in a patented 60-90-110-degree horn that features Variable Coverage Technology or VCT allows the speaker to create precise imaging and localized sound fields.Adding to its first-class sound the KL-7502-THX also has a premium look and feel with its grille off featuring a deluxe MDF baffle with aluminum fascia. But when covered the speaker’s paintable grille allows it to blend in perfectly with any home décor. All-new sure-grip mounting dogs offer even pressure against drywall for long-term installation reliability.Furthermore the KL-7502-THX comes with a lot of options. It is timbre matched to all of our THX Ultra2-certified products so you can mix and match for the discreet stereo or home theater system that’s just right for you.CUTOUT DIMENSIONS: 13.25 (33.7cm) diaDIMENSIONS: 15.25 (38.7cm) diaENCLOSURE MATERIAL: MDF & Aluminum motorboard / ABS shellENCLOSURE TYPE: Bass-reflex via front-firing portFINISHES: White paintable frame and grilleFREQUENCY RESPONSE: 45Hz-20kHz +/-3dBHIGH FREQ CROSSOVER: 1800Hz & 1200HzHIGH FREQUENCY DRIVERS: 1 (2.5cm) Titanium diaphragm compression driver mated to 60 - 90 - 110 VCT variable coverage technology skewed hornLOW FREQUENCY DRIVERS: Dual 5.25 (13.3cm) high-output, Cerametallic cone woofersMOUNTING DEPTH: 9.5 (24.1cm)NOMINAL IMPEDANCE: 8 ohms compatiblePOWER HANDLING: 100W continuous / 400W peakSENSITIVITY: 93dB @ 2.83V / 1mWEIGHT: 12lbs (5.4kg)Subwoofer:bass-reflex (ported) enclosure350-watt RMS digital hybrid amplifier12 front-firing Cerametallic™ driverCornerPort™ technology3 equalization modes (Punch, Depth, and Flat)3 user-defined preset modes (Movie, Music, and Night)back-panel IR sensor for use with remote control extender systems (not included)frequency response 24-120 Hz (±3dB)variable 40-120 Hz crossoverphase adjustmentauto on/offline level/LFE (low frequency effects) inputspeaker-level inputs14-5/8W x 19-1/16H x 23-5/16D

NEW CONDITION. PLEASE SEE ALL PHOTOS FOR DESCRIPTION AND DETAILS. PLEASE MSSG ME W/ ANY QUESTIONS, CONCERNS, OR ADDITIONAL PHOTOS!!

Verkaufe meine Klipsch Standlautsprecher RF15 8ohm 100watt + Subwoofer RW8. Die Lautsprecher sind technisch einwandfrei. Die Gehuse in schwarz Esche Optik haben kleine Gebrauchsspuren. Die Abdeckungen sind an einigen Stellen am Stoff beschdigt. Dies ist ein Privatverkauf!!! Keine Garantie und keine Rcknahme. Kein Versand nur Abholung!

Klipsch RW 12D - 350 Watt POWERED SUBWOOFER *FREE SHIPPING - TESTED AND PERFORMS FLAWLESSLY - GREAT COSMETIC CONDITION AS SEEN IN ACTUAL PICTURES - ITEMS ALWAYS PACKED WITH CARE FOR SAFE DELIVERY SEE OUR STELLAR FEEDBACK

Klipsch RW-51M WISA powered monitor speakers. These are immaculate, in original box etc. Must be used with axiim transmitter, can be purchased from me separately if required. Non returnable if you are using something else. Happy to demonstrate them if local. Collection also possible. Grab a bargain as these are 800+ speakers

Klipsch RW-8 120V Black Powered Home Theater Subwoofer - Used/tested. SPECS AMPLIFIER Class A/B Discrete (w/Switch Mode Power Supply) FTC Rated Power: 125 watts continuous @ <2%THD Dynamic Power*: 270 watts BANDWIDTH 32-120Hz 3dB MAXIMUM OUTPUT 103dB @ 30Hz 1/8 space, 1 meter LOW PASS Continuously variable from 40-120Hz CROSSOVER 24dB/octave slope above 120Hz INPUTS Two high level speaker binding posts, two line level RCA phono jacks, one line level LFE jack OUTPUTS None PHASE Continuously variable from 0-180 degrees DRIVE COMPONENTS One 8 (20.3cm) front-firing Cerametallic cone woofer

Klipsch RW-51M WISA powered monitor speakers. These are immaculate, in original box etc. Must be used with axiim transmitter, can be purchased from me separately if required. Non returnable if you are using something else. Happy to demonstrate them if local. Collection also possible. Grab a bargain as these are 800+ speakers

Klipsch RW-51M WISA powered monitor speakers. These are immaculate, in original box etc. Must be used with axiim transmitter, can be purchased from me separately if required. Non returnable if you are using something else. Happy to demonstrate them if local. Collection also possible. Grab a bargain as these are 800+ speakers

Donated item in support of Austin Habitat For Humanity Condition: Pre-OwnedThe speaker has been tested, works and sounds good.Appearance does show some obvious use with scratches, scrapes and spots around the body.May need addition hardware for proper install/mounting.(see photos for examples) All sales within Texas will require sales tax. About Us:When you shop here, you shop for a cause. Every purchase benefits the creation of affordable homes and keeps valuable, reusable materials out of landfills. Thank you for supporting Austin Habitat for Humanity and our mission to build strong, stable, and self-reliant communities. Shipping:We ship within the United States only. Returns:Returns are accepted within 14-days of delivery, for a full refund of your purchase price.Buyer is to pay return shipping fee.

Donated item in support of Austin Habitat For Humanity Condition: Pre-OwnedThe speaker has been tested, works and sounds good.Appearance does show some obvious use with scratches, scrapes and spots around the body.May need addition hardware for proper install/mounting.(see photos for examples) All sales within Texas will require sales tax. About Us:When you shop here, you shop for a cause. Every purchase benefits the creation of affordable homes and keeps valuable, reusable materials out of landfills. Thank you for supporting Austin Habitat for Humanity and our mission to build strong, stable, and self-reliant communities. Shipping:We ship within the United States only. Returns:Returns are accepted within 14-days of delivery, for a full refund of your purchase price.Buyer is to pay return shipping fee.

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.

Klipsch RW-51M WISA powered monitor speakers. These are immaculate, in original box etc. Grab a bargain!

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.

Klipsch RW-5802 Passive Subwoofer.

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.

Klipsch RW 10 Powered 10 Subwoofer (Black) Great Buy Shipping International! Actual photos, looks great. Sounds great. PAYMENT INFO: Payment is due immediately after the auction end. If you cannot pay immediately after the auction but want to bid please contact me and let me know when you will be able to send payment and I will let you know if you can bid. If your feedback is less than 10, please contact me before bidding just to let me know that you are a real person and not someone that is going to bid and not pay. If you do not contact me before bidding, I will try to contact you and if you do not respond then I will cancel your bids and block your user id. SHIPPING INFO I will ship this out by the next day via FedEx after the payment is received. Your tracking number will be automatically sent to you when it goes out. I always pack well and insurance is always included! INTERNATIONAL BUYERS This will be fully insured. I do have express shipping available so feel free to ask for a quote. I dont lie on customs forms so please dont ask me to mark down invoices. Customs, taxes and or duties may apply. Thanks For Looking!

Klipsch RF-25 Speakers amd RW-12 Subwoofer. The speakers sound amazing and are in perfect working condition. The cloth on the speaker grilles needs to be replaced.

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.