Beschreibung:Wertiger Stereo Endverstärker wie im Titel benannt und original fotografiert. Läuft gut. Der abgebildete ist exakt der angebotene Power-Amplifier. Bilder zeigen den kompletten Auktionsumfang.Zustand: technisch funktionsfähig. Äusserlich Front noch ordentlich erhalten, Macke in Oberkante, Deckelblech mit Gebrauchsspuren, vgl. Bilder.Kein Versand ausserhalb Deutschland. Versand nur an die bei eBay fest hinterlegte Versandadresse! Nur DPD-Versand, Keine Packstation. No shipping outside Germany - were sorry! Sofort-Kaufen Anfragen zwecklos!English: item is running. Abholung ist nicht möglich! etope 8

Please read below so you know what you are paying for! This is a very well regarded 220watts per channel power amplifier from the Glory days of the 70s and 80s. The Kenwood Basic M2a Stereo Power amplifier. Condition: Excellent condition, immaculate. I have had dozens of M2as pass through my bench over the years for servicing, this is one of the best ones. Barely much to report. There are some signs of age as you would expect, but otherwise, a very very desirable condition. She is a keeper. Servicing: - Fully serviced/ Cleaned- Solder reflowed as with age some of the high current joints can start to go- DC offset adjusted. It is now set to below 2mV or 0.002volts.- Bias set to optimal levels. Tested it for several hours and got it dialed in perfectly.- Meters calibrated, and luminosity set to 70% (better life and wont hurt the eyes at night)- Tested the fan thermostat, triggered at the right time- Controls cleaned and lubricated- Functionally there is nothing wrong with it- Tested power outputs as follows: (All before clipping at 1kHz) 288 watts x2 into 8 ohms 361 watts x 2 into 4 ohms 484 watts x1 into 4 ohms Upgrades: I have done the following upgrades to the unit. Installed Premium Banana Speaker binding posts. These Jacks have a unique look that go with the RCA Jacks. The OEM posts do not accept banana jacks, just bare wire. These ones accept bare wire, banana jacks, Spade lugs and other connectors. I chose ones that match the RCA jacks. Installed Gold plated Audiophile grade RCA Jacks (to Match the speaker posts).RECAPPED all signal path capacitors with a combination of Nichicon Fine Gold UKZ, Panasonic low ESR FC and Nichicon Muse. These are purposely selected good quality capacitors that are fit for purpose. 6-8 hours of time went into this unit. Price that at whatever you feel is a fair price. You will not find a better sounding Kenwood M2a!

Please read below so you know what you are paying for! This is a very well regarded 220watts per channel power amplifier from the Glory days of the 70s and 80s. The Kenwood Basic M2a Stereo Power amplifier. Condition: Excellent condition, immaculate. I have had dozens of M2as pass through my bench over the years for servicing, this is one of the best ones. Barely much to report. There are some signs of age as you would expect, but otherwise, a very very desirable condition. She is a keeper. Servicing: - Fully serviced/ Cleaned- Solder reflowed as with age some of the high current joints can start to go- DC offset adjusted. It is now set to below 2mV or 0.002volts.- Bias set to optimal levels. Tested it for several hours and got it dialed in perfectly.- Meters calibrated, and luminosity set to 70% (better life and wont hurt the eyes at night)- Tested the fan thermostat, triggered at the right time- Controls cleaned and lubricated- Functionally there is nothing wrong with it- Tested power outputs as follows: (All before clipping at 1kHz) 288 watts x2 into 8 ohms 361 watts x 2 into 4 ohms 484 watts x1 into 4 ohms Upgrades: I have done the following upgrades to the unit. Installed Premium Banana Speaker binding posts. These Jacks have a unique look that go with the RCA Jacks. The OEM posts do not accept banana jacks, just bare wire. These ones accept bare wire, banana jacks, Spade lugs and other connectors. I chose ones that match the RCA jacks. Installed Gold plated Audiophile grade RCA Jacks (to Match the speaker posts).RECAPPED all signal path capacitors with a combination of Nichicon Fine Gold UKZ, Panasonic low ESR FC and Nichicon Muse. These are purposely selected good quality capacitors that are fit for purpose. 6-8 hours of time went into this unit. Price that at whatever you feel is a fair price. You will not find a better sounding Kenwood M2a!

Amp sounds great A + B speakers tested and working Headphone jack works Switched and Unswitched outlets working Hold buttons for graphics working Local pick up in Los Angeles or shipping via UPS Ground with signature required.

Amp sounds great A + B speakers tested and working Headphone jack works Switched and Unswitched outlets working Hold buttons for graphics working Face plate has some stains /spots and a streak on graphics window. Sticker residue to the right of graphics window See pictures for best description and details

POWERS ONSHIPPING IS 50.00

Kenwood Basic M2A Endstufees ist alles voll funktionstüchtig - es gibt keine Beschädigung an der Elektronikaußen am Power-Schalter fehlt die Blende - Schalter funktioniert trotzdemaugenscheinlich mit diversen Gebrauchsspuren - wie z.B. Schleif- und Kratzspurendie bereitgestellten Fotos zeigen den angebotenen Artikelaußerdem zeigen sie die Bestandteile der Lieferung!!! ohne Netzkabel !!!weitere Artikel finden Sie in meinem Shop

Kenwood Stereo Amplifier Basic M2AAllgemeinHersteller: KenwoodModell: Basic M 2 ATyp: Stereo EndverstärkerBaujahre: 1987 - 1990Hergestellt in:Farbe: SchwarzFernbedienung: neinLeistungsaufnahme: 500 WAbmessungen: 440 x 158 x 373 mm (BxHxT)Gewicht: 15,5 kgNeupreis ca.: 1.500,- DM Anschlüsse Anzahl der Eingänge:1 x Line InAnzahl der Ausgänge:2 x Lautsprecher Technische Daten Nennleistung8 Ohm: 2x 220 W RMS (20Hz - 20kHz, bei 0.004% THD)Dauerleistung (bei Klirrfaktor)8 Ohm: 2x 230 W (bei 0.7% THD, 63Hz - 12,5kHz, nach IEC/NF Norm; bei 1% THD, 1kHz, nach DIN Norm)4 Ohm: 2x 250 W (bei 1% THD, 1kHz, nach DIN Norm)Dynamikleistung8 Ohm: 2x 346 W4 Ohm: 2x 526 WGesamtklirrfaktor:0,004% bei Nennleistung (20Hz - 20kHz, 8 Ohm)0,001% bei Nennleistung (1kHz, 8 Ohm)Intermodulationsverzerrungen0.004% bei Nennleistung (60Hz:7kHz = 4:1, 8 Ohm)Dämpfungsfaktor: 1.000 (50Hz, 8 Ohm)Anstiegszeit 1,6 µSek.Eingang (Empfindlichkeit/Impedanz):1V/47kOhmFrequenzgang: 0 - 300 kHz (+0, -3dB)Signalrauschabstand:120dB (nach IHF-66)70dB (nach IEC/NF)Stereokanaltrennung: 70dB (nach IEC/NF) Besondere Ausstattungen Kanalgetrennte PegelreglerLeistungsanzeige mit Peak-Hold (abschaltbar und umschaltbar 1/3 Sek.)KopfhöreranschlussTechnischer Zustand: Vollfunktionsfähig Optischer Zustand: GebrauchtLieferumfang: Kenwood Basic M2Awie auf den Fotos Alle Fotos sind Originalfotos. Shipment to EU I/F/B 35 EuroDie ersteigerten Sachen können auch gern abgeholt werden.

KENWOOD Stereo Power Amplifier BASIC M2A. IN BUONISSIMO STATO.Lo vendo funzionante. Era di mio padre ,e lui lha usato fino alla sua scomparsa.Da allora circa 3 anni ,non è mai piu stato usato.