looks very nice-very small use marks-powers up

AS-IS For Parts or Repair SALE INCLUDES: (Kenwood KA-2002A Solid State Stereo Amplifier Amp Sold as is *No Power*) DOES NOT COME WITH: Any other accessories not noted or shown in photos. *Unless noted or pictured, power cords or adapters are not included. AS-IS DisclaimerAS-IS items have been tested and are either not working, or do not have full functionality. As-Is items may power on, but have issues that keep them from functioning as they should. We do not have the facilities to diagnose every issue with such items. AS-IS items cannot be returned or exchanged for any reason. Buyer assumes all responsibility. These items are intended for parts or repair for professional buyers only. Because this item is used/AS-IS it will show minimum to moderate cosmetic wear. We would also advise viewing each of the pictures to get a better idea of condition specifics. Please read all policies below prior to sending an offer or making the purchase. Auction PoliciesCustomer Service:5 Star service is our number one priority. Our office hours are Monday-Friday 9:00AM to 5:00PM. Feel free to contact us anytime and we will do our best to address any questions or concerns. Shipping: There will be a shipping surcharge for items shipped to Alaska, Hawaii, and Puerto Rico. Please contact us for total cost before purchase. Thank you.Your purchase will be processed, professionally packaged, and quickly shipped by our shipping department. Your item(s) will be shipped via USPS, FedEx, or UPS. NOT ALL ITEMS ARE ELIGIBLE TO BE SHIPPED TO A P.O. BOX. A HOME OR BUSINESS ADDRESS MAY BE REQUIRED. PLEASE CONTACT US PRIOR TO PURCHASE IF A P.O. BOX IS YOUR ONLY OPTION Customer Pick Up: If you are in or around the Seattle area and would like to pick your purchase up in person, you can come by and pick it up during business hours. Just send us a message with the listing number and we will give you our address. As Is/Parts or repair: If repairs have been attempted on the item a 25% deduction will apply. Free returns are still accepted in these cases. Compatibility: Customers are responsible for checking compatibility of all parts. Returns due to incompatibility will be charged a 20% deduction could be applied. Refunds will be processed upon return of item in good working order and verification of serial numbers. Warranty Info: Warranties, if available, are listed in each item description. If you do not agree to these terms, do not make the purchase or send an offer.

We use a 48 hour courier service but please allow up to 3 days handling time as a lot of our items are large and timeconsuming to package. Many thanks :) Fully Working and tested KA-4002A vinatge stereo integrated amp. It has had it’s electrolytic caps changed a few years ago, along side new gold plated 4mm binding posts, so it has brought this proper old classic more up to date. Great sounding with gorgeous vintage looks. Cosmetically it’s superb, with only a couple of minor surface scratches to the top edge of the facia, other than that it is practically unmarked. specs. Power output: 18 watts per channel into 8? (stereo)Frequency response: 20Hz to 40kHzTotal harmonic distortion: 0.5%Damping factor: 50Input sensitivity: 2.5mV (MM), 150mV (line)Signal to noise ratio: 60dB (MM), 70dB (line)Output: 150mV (line), 30mV (DIN)Speaker load impedance: 4? to 16?Dimensions: 352 x 118 x 240mmWeight: 5.7kg Please inspect the pictures (please also use the zoom function on the photos) and be sure of what you are buying, please don’t buy this if you are at all unsure, I will answer any questions you have, just email BEFORE PURCHASING. This is a used item and has been fairly described to the best of our ability, it has not been serviced by us, just described in it’s current operational and cosmetic order. If you are not happy with any item, we can arrange collection from you for a full refund (even if you are outside the UK) We will not provide any partial refunds and will not cover any restoration, detailed or internal cleaning, repairs or modification costs. Any questions regarding out of eBay deals will be ignored Any items suspected missing in transit, must be reported to us within 10 days. Shipping We ship using a 24 hour courier. Please allow up to 3 days handling time as a lot of our items are large and take time to package well. Collections Collections from our unit in Bordon are available on Wednesdays and Fridays. Visit our storeHi-Fi Hangar Vintage hifi specialists Other PROJECTS, SPARES & REPAIRS HI-FI & AUDIO EQUIPMENT AMPLIFIERS DISK PLAYERS (CD/DVD/MD/SACD) TUNERS CASSETTE/TAPE DECKS SPEAKERS STUDIO EQUIPMENT TURNTABLES/RECORD PLAYERS CARTRIDGES TONEARMS MERCHANDISE T-SHIRTS ACCESSORIES Payment We take payment through the ebay managed payment system, Shipping We ship using a 24 hour courier. Please allow up to 3 days handling time as a lot of our items are large and take time to package well. _gsrx_vers_1652 (GS 9.7.4 (1652))

Vintage amplifier stéreo, manufactured in Japan. KENWOOD KA-2002A.Has been revised, lubricated pots, and changed fused lightbulb is the only actions.All inputs working.Specs ( from www) ( not guaranteed) Uutput Power: 13 watts per channel into 8 Ohms (stereo) Frequency response: 20Hz to 30kHz Total harmonic distortion: 0.8% Damping factor: 50 Input sensitivity: 2mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio: 60dB (MM), 70dB (DIN), 70dB (line) Output: 150mV (line), 30mV (DIN) Speaker load impedance: 4 to 16 Ohms Dimensions: 33 x 10 x 23 cm Weight: 11.9lbs

Kenwood KA-2002A Solid State Stereo Amplifier Amp Sold as SPARES/PARTS The unit is just sold as SPARES. The power cord has been cut from the unit. So please assume it has faults. There are NO cables included. Sold as SPARES.

Vintage amplifier stéreo, manufactured in Japan. KENWOOD KA-2002A.Has been revised, lubricated pots, and changed fused lightbulb is the only actions.All inputs working.Specs ( from www) ( not guaranteed) Uutput Power: 13 watts per channel into 8 Ohms (stereo) Frequency response: 20Hz to 30kHz Total harmonic distortion: 0.8% Damping factor: 50 Input sensitivity: 2mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio: 60dB (MM), 70dB (DIN), 70dB (line) Output: 150mV (line), 30mV (DIN) Speaker load impedance: 4 to 16 Ohms Dimensions: 33 x 10 x 23 cm Weight: 11.9lbs

KENWOOD L-02A NEW SEPARATE AMPLIFIER ORIGINAL SERVICE REPAIR MANUAL.

Ampli Kenwood Vintage KA-4002A. Superbe tat dorigine, les potentiomtres sont propres et ne craquent pas. Superbe fabrication, superbe son, belle tessiture, ar, enveloppant.... La led rouge ne sallume pas, mais lampli fonctionne parfaitement. Peut tre quelle ne sallume quen mode recording ? The Kenwood KA-4002 is the solid state stereo amplifier that packs a compact sized wallop. With 58 watts and intensely low distortion, this instrument guarantees top level performance of the highest proportions. Another remarkable example of Kenwoods complete, high quality circuitry, the KA-4002 also stresses modern, up to date design with its simple stylized exterior. Its unbeatable craftsmanship makes this model another testimony to Kenwoods deserved world fame. Specifications 4002 4002A Power output: 18 watts per channel into 8 (stereo) Frequency response: 20Hz to 40kHz Total harmonic distortion: 0.5% Damping factor: 50 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 60dB (MM), 70dB (line) Output: 150mV (line), 30mV (DIN) Speaker load impedance: 4 to 16 Semiconductors: 18 x transistors, 10 x diodes Dimensions: 13 x 4-5/8 x 9-7/16 inches Weight: 5.7kg

brand new I bought one too many never used. New open box all accessories including charging base and cable and belt adapter included Kenwood ProTalk NX-P1202AV VHF Two-Way Portable Radio (2 W), 64 Channels & 4 Zones, 1,000 mW Loud Speaker, 11 Mil-Spec Standards 810 (C/D/E/F/G) & IP54/55 Kenwood ProTalk NX-P1202AV Details BrandKenwood ColorBlack Number of Channels64 Special FeaturePortable Age Range (Description)Adult Tuner TechnologyVHF Water Resistance LevelWater Resistant Number of Batteries1 Lithium Ion batteries required. (included) Included ComponentsRadio International Protection RatingIP54, IP55 VHF Two-Way Portable Radio. Description Experience enhanced audio quality with minimal distortion with the Kenwood ProTalk NX-P1202AV VHF (Very High frequency) Analog Business Radio which delivers professional performance at an economical price point. Featuring 64 channels equally divided between 4 zones, this push-to-talk radio allows effortless communication in business and industry environment. The radio is equipped with a 16-code voice inversion scrambler that ensures complete confidentiality and security. Loaded with features like radio-to-radio cloning (requires optional cloning cable), adjustable microphone gain, channel scanning, button lock, time-out timer, low battery warning, voice announcement, and more, this device is acomplete package. Rated IP54/55 for water/dust resistance, and designed to meet 11 Military Standards 810, it ensures optimal performance even in rigorous work environments. Features & details CLEAR AND CONFIDENT - The Kenwood ProTalk NX-P1202AV VHF Analog Radio (2 W) features 64 channels (with 4 zones) and offers clear audio with minimal distortions. Voice announcement, and more, this device is a complete package. Rated IP54/55 for water/dust resistance, and designed to meet 11 Military Standards 810, it ensures optimal performance even in rigorous work environments.

brand new I bought one too many never used. New open box all accessories including charging base and cable and belt adapter included Kenwood ProTalk NX-P1202AV VHF Two-Way Portable Radio (2 W), 64 Channels & 4 Zones, 1,000 mW Loud Speaker, 11 Mil-Spec Standards 810 (C/D/E/F/G) & IP54/55 Kenwood ProTalk NX-P1202AV Details BrandKenwood ColorBlack Number of Channels64 Special FeaturePortable Age Range (Description)Adult Tuner TechnologyVHF Water Resistance LevelWater Resistant Number of Batteries1 Lithium Ion batteries required. (included) Included ComponentsRadio International Protection RatingIP54, IP55 VHF Two-Way Portable Radio. Description Experience enhanced audio quality with minimal distortion with the Kenwood ProTalk NX-P1202AV VHF (Very High frequency) Analog Business Radio which delivers professional performance at an economical price point. Featuring 64 channels equally divided between 4 zones, this push-to-talk radio allows effortless communication in business and industry environment. The radio is equipped with a 16-code voice inversion scrambler that ensures complete confidentiality and security. Loaded with features like radio-to-radio cloning (requires optional cloning cable), adjustable microphone gain, channel scanning, button lock, time-out timer, low battery warning, voice announcement, and more, this device is acomplete package. Rated IP54/55 for water/dust resistance, and designed to meet 11 Military Standards 810, it ensures optimal performance even in rigorous work environments. Features & details CLEAR AND CONFIDENT - The Kenwood ProTalk NX-P1202AV VHF Analog Radio (2 W) features 64 channels (with 4 zones) and offers clear audio with minimal distortions. Voice announcement, and more, this device is a complete package. Rated IP54/55 for water/dust resistance, and designed to meet 11 Military Standards 810, it ensures optimal performance even in rigorous work environments.