Sie bieten hier auf ein Set der Edelschmiede KEF fivetwo-Systems, das mit zwei Lautsprechern einen echten 5-Kanal-Raumklang realisieren kann. Die Lautsprecher haben mir sehr viel Freude bereitet, einfach nur ein Genuss. Für den, der auf zusätzliche hintere und seitliche Lautsprecher z.B. aus Platzgründen verzichten will, ist dieses System eine perfekte Lösung. Die Lautsprecher sind voll funktionsfähig und ohne Beschädigungen. Der Neupreis betrug damals über 1000 Euro! Für kleine bis mittel große Räume dürften diese Lautsprecher perfekt sein. Da es sich um einen Privatverkauf handelt, gibt es keine Garantie oder Rücknahme. Produktbeschreibung der KEF FIVE TWO 11 StandlautsprecherMan muss nur ins Kino gehen um zu merken, was fehlt, wenn man Kinofilme vor dem heimischen Bildschirm anschaut ohne ein passendes Heimkinosystem zu haben. Für viele Filmfreunde sind konventionelle Heimkinosysteme aber zu aufwendig in der Installation. Die KEF fivetwo series bietet echten 5-Kanal-Raumklang mit nur zwei Lautsprechern – für ein hochwertiges 3D-Klangbild, egal wo Sie sitzen: „dabei sein“ im wahrsten Sinne des Wortes! Wie bei allen großartigen Ideen ist das Konzept einfach. Die vertikalen Flat Panels hinter den Hauptlautsprechern dienen als Rear-Lautsprecher, während die Uni-QChassis vorne für die perfekte Links-/Center-/Rechts-Abbildung sorgen – wie im richtigen Kino. Der Effekt ist natürlich beeindruckend, messerscharfe Dialoge und verblüffende Raumklangeffekte. Hauptmerkmal der akustischen Leistungsfähigkeit ist KEFs „sit anywhere“ Uni-QTechnologie. Sie verteilt den Klang extrem gleichmäßig im gesamten Raum, so dass Sie den optimalen 3D-Klang genießen können – egal wo Sie sitzen. Technische Daten der KEF fivetwo 11 Modell: Model 11 Design: Raumklang-Standlautsprecher Chassis Realer Center-Kanal: 1 x 75mm Uni-Q Chassis mit 1 x 15mm HF, 1 x 75mm LF Chassis Front Links-/Rechts-Kanal: 1 x 75mm Uni-Q Chassis mit 1 x 15mm HF, 4 x 75mm LF Chassis Rear Links-/Rechts-Kanal: 2 x Vertikales Flat Panel Frequenzgang: 90 Hz – 30 kHz Magnetisch abgeschirmt Empfindlichkeit (2,83 V/1m): 85 dB Maximaler Schalldruck: 105 dB Impedanz: 8 Ohm Gewicht: 11,3 kg Maße (H x B x T): 1020 x 210 x 230 mm Die Verbindungskabel für den Anschluss an jeden üblichen AV-Verstärker/Receiver sind im Lieferumfang enthalten Da es sich um ein Privatverkauf handelt, gibt es keine Garantie und Rücknahme.

KEF FiveTwo Model 11, Subwoofer KEF HTB2SE-W Ein Klangerlebnis muss man nicht sehen, also sollte die für den Surround-Sound benötigte Ausstattung so unauffällig wie möglich sein. Daher hat KEF eine Alternative zu den herkömmlichen Heimkino-Systemen mit fünf Lautsprechern entwickelt. Wie der Name bereits vermuten lässt, verspricht die neue fivetwo-Serie einen Surround-Sound einer vollständigen 5.1-Konfiguration mit nur zwei Lautsprechern und einem Subwoofer. Wir haben alles in die Lautsprecher der fivetwo series gepackt, was wir in den vergangenen 45 Jahren innovativen und preisgekrönten Lautsprecherbaus gelernt haben. Das Ergebnis ist Klang für den heutigen „way of life“. Wie bei allen großartigen Ideen ist das Konzept einfach. Die vertikalen Flat Panels hinter den Hauptlautsprechern dienen als Rear-Lautsprecher, während die Uni-Q®-Chassis vorne für die perfekte Links- / Center- /Rechts-Abbildung sorgen - wie im richtigen Kino. Der Effekt ist natürlich beeindruckend, messerscharfe Dialoge und verblüffende Raumklangeffekte. Hauptmerkmal der akustischen Leistungsfähigkeit ist KEFs „sit anywhere“ Uni-Q-Technologie. Sie verteilt den Klang extrem gleichmäßig im gesamten Raum, sodass Sie den optimalen 3D-Klang genießen können - egal wo Sie sitzen. Technische Daten der KEF fivetwo 11 Modell: Model 11 Design: Raumklang-Standlautsprecher Chassis Realer Center-Kanal: 1 x 75mm Uni-Q Chassis mit 1 x 15mm HF, 1 x 75mm LF Chassis Front Links-/Rechts-Kanal: 1 x 75mm Uni-Q Chassis mit 1 x 15mm HF, 4 x 75mm LF Chassis Rear Links-/Rechts-Kanal: 2 x Vertikales Flat Panel Frequenzgang: 90 Hz – 30 kHz Magnetisch abgeschirmt Empfindlichkeit (2,83 V/1m): 85 dB Maximaler Schalldruck: 105 dB Impedanz: 8 Ohm Gewicht: 11,3 kg Maße (H x B x T): 1020 x 210 x 230 mm Die Verbindungskabel für den Anschluss an jeden üblichen AV-Verstärker/Receiver sind im Lieferumfang enthalten. Allgemeines zum Subwoofer HTB 2/ HTB 2 SE von KEF: Der äußerst zuverlässige, hoch effiziente 250-Watt-Verstärker der Klasse D spielt laut und klar, den ganzen Tag wenn gewünscht. 250-mm-Chassis mit einem passivem Radiator (Auxiliary Bass Radiator). Technische Daten des KEF HTB2SE: Design: Aktiver Subwoofer mit passivem Radiator Chassis 1 x 250 mm , 1 x 250 mm ABR Frequenzbereich (+/-3dB) 30 Hz - 250 Hz Max. Schalldruck 110 dB SPL Innenvolumen 15 l Amplifier 250 W, eingebaut, Klasse D Gewicht 11,3 kg Abmessungen (H x B x T): Vertikal: 390 x 440 x 195 mm - Horizontal: 227 x 440 x 385 mm

Up for sale is a pair of unique, high quality Vintage KEF Model 103.2 Reference Series speakers - these are handmade in England, and are quite the speakers for any audiophile. Both speakers were tested and perform very nicely, all drivers tested well. Reference Series Model 103.2 (1980-85) Model 103.2 was the successor to the highly regarded 103, and continued with the same two-way closed-box format, using an 8” bextrene coned bass driver which used the new three mounting-point chassis to allow mechanical decoupling from the cabinet. It was designed using KEF’s ‘total system design’ approach where drive units, filter networks and enclosures are studied and developed together to achieve a targeted response. The result was a loudspeaker which achieved a broad frequency response with optimum efficiency and yet a surprisingly small enclosure of just 19 litres. Consistent with all models in the Reference range, 103.2 included S-Stop protection circuitry, and all production systems benefited from KEF’s Reference methodology which matched the response of every system to within 1dB of the design reference, with each pair matched to within 0.5dB of each other.

Pair of KEF model 107/2 type SP3119 Speaker Towers. I purchased a house and these were in the home. As you can see in the pictures, one of the towers was mid repair on both speakers . I have not tested either of them. I am selling them as is just as they sit. The exterior portion of the boxes is quite nice with only a couple minor blemishes. It would appear that the speakers were either being replaced, or repaired Otherwise seem complete. I am not a audio person so I apologize for my lack of description. What you see is what you get. I will strongly consider all offers No returns

Up for sale is a pair of unique, high quality Vintage KEF Model 103.2 Reference Series speakers - these are handmade in England, and are quite the speakers for any audiophile. Both speakers were tested and perform very nicely, all drivers tested well. Reference Series Model 103.2 (1980-85) Model 103.2 was the successor to the highly regarded 103, and continued with the same two-way closed-box format, using an 8” bextrene coned bass driver which used the new three mounting-point chassis to allow mechanical decoupling from the cabinet. It was designed using KEF’s ‘total system design’ approach where drive units, filter networks and enclosures are studied and developed together to achieve a targeted response. The result was a loudspeaker which achieved a broad frequency response with optimum efficiency and yet a surprisingly small enclosure of just 19 litres. Consistent with all models in the Reference range, 103.2 included S-Stop protection circuitry, and all production systems benefited from KEF’s Reference methodology which matched the response of every system to within 1dB of the design reference, with each pair matched to within 0.5dB of each other.

Nice set of lightly used KEF Reference Series 101 speakers. Nice overall cosmetic condition. The black terminal on one of the speakers needs attention/replacement (see last pic). Despite this defect, the speaker still works but the connection isn’t as secure as it would normally be. Many owners of these opt to install higher end binding posts anyway. Both cabinets exhibit some minor blems here and there . Cosmetic condition is highly subjective so please carefully review all the pics before bidding.

Up for sale is a pair of unique, high quality Vintage KEF Model 103.2 Reference Series speakers - these are handmade in England, and are quite the speakers for any audiophile. Both speakers were tested and perform very nicely, all drivers tested well. Reference Series Model 103.2 (1980-85) Model 103.2 was the successor to the highly regarded 103, and continued with the same two-way closed-box format, using an 8” bextrene coned bass driver which used the new three mounting-point chassis to allow mechanical decoupling from the cabinet. It was designed using KEF’s ‘total system design’ approach where drive units, filter networks and enclosures are studied and developed together to achieve a targeted response. The result was a loudspeaker which achieved a broad frequency response with optimum efficiency and yet a surprisingly small enclosure of just 19 litres. Consistent with all models in the Reference range, 103.2 included S-Stop protection circuitry, and all production systems benefited from KEF’s Reference methodology which matched the response of every system to within 1dB of the design reference, with each pair matched to within 0.5dB of each other.

Pair of 2 - KEF Model 103.2 Speakers / Wood Cab / Type SP1121 / Made In England 0 false 18 pt 18 pt 0 0 false false false Pair of speakers are in very good condition. A few scratches and dings that can be easily sanded out. Also, one speaker has a faint watermark on top (see photos). Speakers tested and sound great. 8 ohms, matching serial No. 2917. Speaker dimensions are 20” tall, 10.5” wide, and 10” deep with face cover on. No tears to speaker fabric, no dings in speaker hardware. Please completely read the item description before bidding. If there is an issue with your item after you receive it, contact me immediately and I will do my best to clear up any problems and earn 5-star ratings from you. Shipping: Winning bidder to pay $XXXXXXX for USPS shipping or FedEx Home Delivery plus delivery confirmation to U.S. only. If auction exceeds $250, shipping will include insurance and signature confirmation as well.International shipping MAY be available on smaller items. Please ask before bidding as some items are quite expensive to ship outside the U.S. Payments: Paypal only -- expected within 3 days after end of the auction. Click Here to View my Other Auctions!

Up for sale is a pair of unique, high quality Vintage KEF Model 103.2 Reference Series speakers - these are handmade in England, and are quite the speakers for any audiophile. Both speakers were tested and perform very nicely, all drivers tested well. Reference Series Model 103.2 (1980-85) Model 103.2 was the successor to the highly regarded 103, and continued with the same two-way closed-box format, using an 8” bextrene coned bass driver which used the new three mounting-point chassis to allow mechanical decoupling from the cabinet. It was designed using KEF’s ‘total system design’ approach where drive units, filter networks and enclosures are studied and developed together to achieve a targeted response. The result was a loudspeaker which achieved a broad frequency response with optimum efficiency and yet a surprisingly small enclosure of just 19 litres. Consistent with all models in the Reference range, 103.2 included S-Stop protection circuitry, and all production systems benefited from KEF’s Reference methodology which matched the response of every system to within 1dB of the design reference, with each pair matched to within 0.5dB of each other.

If you are looking at these, then you know what they are and how spectacular they sound. The heavy duty speaker terminals are really nice because they can do spades or banana plugs and they easily tighten for a solid connection. These have been tested and both speakers are in working order. They are black and in good cosmetic condition. Please see the pictures where there are some minor scratches with a few small dings. Pardon the grandiosity here, but these speakers have made me who I am today. My career as a recording engineer spans over the course of 32 years and these are the only speakers I can trust. Each speaker will be carefully packaged in separate boxes. Please feel free to ask me any questions.

Up for sale is a pair of unique, high quality Vintage KEF Model 103.2 Reference Series speakers - these are handmade in England, and are quite the speakers for any audiophile. Both speakers were tested and perform very nicely, all drivers tested well. Reference Series Model 103.2 (1980-85) Model 103.2 was the successor to the highly regarded 103, and continued with the same two-way closed-box format, using an 8” bextrene coned bass driver which used the new three mounting-point chassis to allow mechanical decoupling from the cabinet. It was designed using KEF’s ‘total system design’ approach where drive units, filter networks and enclosures are studied and developed together to achieve a targeted response. The result was a loudspeaker which achieved a broad frequency response with optimum efficiency and yet a surprisingly small enclosure of just 19 litres. Consistent with all models in the Reference range, 103.2 included S-Stop protection circuitry, and all production systems benefited from KEF’s Reference methodology which matched the response of every system to within 1dB of the design reference, with each pair matched to within 0.5dB of each other.

Up for sale is a pair of unique, high quality Vintage KEF Model 103.2 Reference Series speakers - these are handmade in England, and are quite the speakers for any audiophile. Both speakers were tested and perform very nicely, all drivers tested well. Reference Series Model 103.2 (1980-85) Model 103.2 was the successor to the highly regarded 103, and continued with the same two-way closed-box format, using an 8” bextrene coned bass driver which used the new three mounting-point chassis to allow mechanical decoupling from the cabinet. It was designed using KEF’s ‘total system design’ approach where drive units, filter networks and enclosures are studied and developed together to achieve a targeted response. The result was a loudspeaker which achieved a broad frequency response with optimum efficiency and yet a surprisingly small enclosure of just 19 litres. Consistent with all models in the Reference range, 103.2 included S-Stop protection circuitry, and all production systems benefited from KEF’s Reference methodology which matched the response of every system to within 1dB of the design reference, with each pair matched to within 0.5dB of each other.