Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio JBL COL800-WH 32 White 70V Commercial Slim Column Wall Mount Array Speaker --> Click Thumbnails to Enlarge Condition and Warranty Condition: OPEN BOX Warranty: 1 YEAR AUDIOSAVINGS Product Description Description: The JBL COL800 is an elegant 32-inch (800 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage of most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor. A combination of stylish design and outstanding performance features makes the COL800 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Four 5-inch x 2.25-inch racetrack woofers provide maximum radiating area in a column form factor. Dual tweeters are located at top of the array for less obstructed coverage of the listening space, and they are aimed at a 10° down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall. A 60-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 150W continuous (600W peak, 2 hrs). The 85 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech. Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall). The COL800 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Features:Four 5-inch x 2.25-inch (125 x 55 mm) racetrack woofers & two 0.8-inch (20 mm) tweeters 32 inches tall with shallow 3.7-inch (93 mm) cabinet depth Wide 160° horizontal and focused 60° vertical coverage 10° downward tilt to dispersion aim for covering most listening areas without requiring physical down-tilting of the cabinet 150W continuous pink noise power handling (600W peak) 85 Hz – 20 kHz frequency range Built-in 60W 70V/100V multi-tap transformer, plus 8 ohm direct input 116 dB peak SPL (110 dB continuous), 2 hrs Dual tweeters near top of column for unobstructed coverage of listening space Versatile mounting brackets included -- both close-to-wall L-brackets and low-profile swivel(pan)/tilt wall bracketColor: White Common Applications: The JBL COL800 slim column loudspeaker is ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Specifications: Frequency Range (-10 dB)¹: 85 Hz – 20 kHz Frequency Response (+/-3 dB): 125 Hz – 18 kHz Power Rating (8? setting)2: 300W Continuous Program (2 hrs) 150W (600W peak) Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs) Sensitivity (2.83V @ 1m): 88 dB Coverage Pattern: Vertical 60° [1 kHz-4 kHz average]; 10° down-tilt to vertical aiming axis for +20°/-40° coverage in relation to physical cabinet aim Horizontal 160° [1 kHz – 4 kHz average] Directivity (Q): 8.1 Directivity Index (DI): 9.1 dB Rated Maximum SPL: 110 dB Continuous (116 dB peak) @ 1m Nominal Impedance: 8? (in Thru/direct mode) Minimum Impedance: 7.7 ?@ 290 Hz Transformer Taps: 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8? thru, selectable via switch Transformer Insertion Loss: Less than 1 dB for all taps Maximum Input Voltage: 33 V RMS (2 hrs), 66 V peak Recommended Protective High-Pass: 75 Hz for 8 ? operation; 60 Hz for all transformer tap settings (60W, 30W, 15W and 7.5W). Drivers: Four 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers Two 20 mm (0.8 in.) tweeters (tweeters located at top of array for better coverage of listening space) Enclosure Material: PC + ABS, UL94-V0 flammability rating Grille: Plated SPCC with polyester powder coat finish Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE Environmental Rating: IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006] Terminals: 4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in) Insert Points: Back Panel: 2 threaded insert points for WALL BRACKET, attaches via included M6 x 20 mm bolts, flat washers, & lock washers; plus 1 threaded insert point for secondary safety cable, M6 threaded x 20 mm deep. Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKET; attaches via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.)[Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 28 mm deep.] Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKET; attaches via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.] Mounting: Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall). WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attached together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method. Dimensions (H x W x D): 800 x 102 x 93 mm (31.5 x 4.1 x 3.7 inches) Net Weight: 5.2 kg (11.5 lbs) each Shipping Weight: 6.4 kg (14.0 lbs) each (packed 1 speaker per carton) Included Accessories:Low-profile SWIVEL (PAN) / TILT WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: JBL-COL800-WH* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio JBL COL800-BK 32 Black 70V Commercial Slim Column Wall Mount Array Speaker --> Click Thumbnails to Enlarge Condition and Warranty Condition: OPEN BOX Warranty: 1 YEAR AUDIOSAVINGS Product Description Description: The JBL COL800 is an elegant 32-inch (800 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage of most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor. A combination of stylish design and outstanding performance features makes the COL800 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Four 5-inch x 2.25-inch racetrack woofers provide maximum radiating area in a column form factor. Dual tweeters are located at top of the array for less obstructed coverage of the listening space, and they are aimed at a 10° down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall. A 60-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 150W continuous (600W peak, 2 hrs). The 85 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech. Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall). The COL800 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Features:Four 5-inch x 2.25-inch (125 x 55 mm) racetrack woofers & two 0.8-inch (20 mm) tweeters 32 inches tall with shallow 3.7-inch (93 mm) cabinet depth Wide 160° horizontal and focused 60° vertical coverage 10° downward tilt to dispersion aim for covering most listening areas without requiring physical down-tilting of the cabinet 150W continuous pink noise power handling (600W peak) 85 Hz – 20 kHz frequency range Built-in 60W 70V/100V multi-tap transformer, plus 8 ohm direct input 116 dB peak SPL (110 dB continuous), 2 hrs Dual tweeters near top of column for unobstructed coverage of listening space Versatile mounting brackets included -- both close-to-wall L-brackets and low-profile swivel(pan)/tilt wall bracketColor: Black Common Applications: The JBL COL800 slim column loudspeaker is ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Specifications: Frequency Range (-10 dB)¹: 85 Hz – 20 kHz Frequency Response (+/-3 dB): 125 Hz – 18 kHz Power Rating (8? setting)2: 300W Continuous Program (2 hrs) 150W (600W peak) Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs) Sensitivity (2.83V @ 1m): 88 dB Coverage Pattern: Vertical 60° [1 kHz-4 kHz average]; 10° down-tilt to vertical aiming axis for +20°/-40° coverage in relation to physical cabinet aim Horizontal 160° [1 kHz – 4 kHz average] Directivity (Q): 8.1 Directivity Index (DI): 9.1 dB Rated Maximum SPL: 110 dB Continuous (116 dB peak) @ 1m Nominal Impedance: 8? (in Thru/direct mode) Minimum Impedance: 7.7 ?@ 290 Hz Transformer Taps: 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8? thru, selectable via switch Transformer Insertion Loss: Less than 1 dB for all taps Maximum Input Voltage: 33 V RMS (2 hrs), 66 V peak Recommended Protective High-Pass: 75 Hz for 8 ? operation; 60 Hz for all transformer tap settings (60W, 30W, 15W and 7.5W). Drivers: Four 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers Two 20 mm (0.8 in.) tweeters (tweeters located at top of array for better coverage of listening space) Enclosure Material: PC + ABS, UL94-V0 flammability rating Grille: Plated SPCC with polyester powder coat finish Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE Environmental Rating: IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006] Terminals: 4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in) Insert Points: Back Panel: 2 threaded insert points for WALL BRACKET, attaches via included M6 x 20 mm bolts, flat washers, & lock washers; plus 1 threaded insert point for secondary safety cable, M6 threaded x 20 mm deep. Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKET; attaches via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.)[Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 28 mm deep.] Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKET; attaches via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.] Mounting: Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall). WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attached together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method. Dimensions (H x W x D): 800 x 102 x 93 mm (31.5 x 4.1 x 3.7 inches) Net Weight: 5.2 kg (11.5 lbs) each Shipping Weight: 6.4 kg (14.0 lbs) each (packed 1 speaker per carton) Included Accessories: Low-profile SWIVEL (PAN) / TILT WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: JBL-COL800-BK* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio JBL COL800-WH 32 White 70V Commercial Slim Column Wall Mount Array Speaker --> Click Thumbnails to Enlarge Condition and Warranty Condition: OPEN BOX Warranty: 1 YEAR AUDIOSAVINGS Product Description Description: The JBL COL800 is an elegant 32-inch (800 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage of most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor. A combination of stylish design and outstanding performance features makes the COL800 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Four 5-inch x 2.25-inch racetrack woofers provide maximum radiating area in a column form factor. Dual tweeters are located at top of the array for less obstructed coverage of the listening space, and they are aimed at a 10° down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall. A 60-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 150W continuous (600W peak, 2 hrs). The 85 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech. Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall). The COL800 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Features:Four 5-inch x 2.25-inch (125 x 55 mm) racetrack woofers & two 0.8-inch (20 mm) tweeters 32 inches tall with shallow 3.7-inch (93 mm) cabinet depth Wide 160° horizontal and focused 60° vertical coverage 10° downward tilt to dispersion aim for covering most listening areas without requiring physical down-tilting of the cabinet 150W continuous pink noise power handling (600W peak) 85 Hz – 20 kHz frequency range Built-in 60W 70V/100V multi-tap transformer, plus 8 ohm direct input 116 dB peak SPL (110 dB continuous), 2 hrs Dual tweeters near top of column for unobstructed coverage of listening space Versatile mounting brackets included -- both close-to-wall L-brackets and low-profile swivel(pan)/tilt wall bracketColor: White Common Applications: The JBL COL800 slim column loudspeaker is ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Specifications: Frequency Range (-10 dB)¹: 85 Hz – 20 kHz Frequency Response (+/-3 dB): 125 Hz – 18 kHz Power Rating (8? setting)2: 300W Continuous Program (2 hrs) 150W (600W peak) Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs) Sensitivity (2.83V @ 1m): 88 dB Coverage Pattern: Vertical 60° [1 kHz-4 kHz average]; 10° down-tilt to vertical aiming axis for +20°/-40° coverage in relation to physical cabinet aim Horizontal 160° [1 kHz – 4 kHz average] Directivity (Q): 8.1 Directivity Index (DI): 9.1 dB Rated Maximum SPL: 110 dB Continuous (116 dB peak) @ 1m Nominal Impedance: 8? (in Thru/direct mode) Minimum Impedance: 7.7 ?@ 290 Hz Transformer Taps: 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8? thru, selectable via switch Transformer Insertion Loss: Less than 1 dB for all taps Maximum Input Voltage: 33 V RMS (2 hrs), 66 V peak Recommended Protective High-Pass: 75 Hz for 8 ? operation; 60 Hz for all transformer tap settings (60W, 30W, 15W and 7.5W). Drivers: Four 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers Two 20 mm (0.8 in.) tweeters (tweeters located at top of array for better coverage of listening space) Enclosure Material: PC + ABS, UL94-V0 flammability rating Grille: Plated SPCC with polyester powder coat finish Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE Environmental Rating: IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006] Terminals: 4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in) Insert Points: Back Panel: 2 threaded insert points for WALL BRACKET, attaches via included M6 x 20 mm bolts, flat washers, & lock washers; plus 1 threaded insert point for secondary safety cable, M6 threaded x 20 mm deep. Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKET; attaches via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.)[Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 28 mm deep.] Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKET; attaches via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.] Mounting: Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall). WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attached together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method. Dimensions (H x W x D): 800 x 102 x 93 mm (31.5 x 4.1 x 3.7 inches) Net Weight: 5.2 kg (11.5 lbs) each Shipping Weight: 6.4 kg (14.0 lbs) each (packed 1 speaker per carton) Included Accessories:Low-profile SWIVEL (PAN) / TILT WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: JBL-COL800-WH* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio JBL COL800-BK 32 Black 70V Commercial Slim Column Wall Mount Array Speaker --> Click Thumbnails to Enlarge Condition and Warranty Condition: OPEN BOX Warranty: 1 YEAR AUDIOSAVINGS Product Description Description: The JBL COL800 is an elegant 32-inch (800 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage of most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor. A combination of stylish design and outstanding performance features makes the COL800 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Four 5-inch x 2.25-inch racetrack woofers provide maximum radiating area in a column form factor. Dual tweeters are located at top of the array for less obstructed coverage of the listening space, and they are aimed at a 10° down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall. A 60-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 150W continuous (600W peak, 2 hrs). The 85 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech. Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall). The COL800 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Features:Four 5-inch x 2.25-inch (125 x 55 mm) racetrack woofers & two 0.8-inch (20 mm) tweeters 32 inches tall with shallow 3.7-inch (93 mm) cabinet depth Wide 160° horizontal and focused 60° vertical coverage 10° downward tilt to dispersion aim for covering most listening areas without requiring physical down-tilting of the cabinet 150W continuous pink noise power handling (600W peak) 85 Hz – 20 kHz frequency range Built-in 60W 70V/100V multi-tap transformer, plus 8 ohm direct input 116 dB peak SPL (110 dB continuous), 2 hrs Dual tweeters near top of column for unobstructed coverage of listening space Versatile mounting brackets included -- both close-to-wall L-brackets and low-profile swivel(pan)/tilt wall bracketColor: Black Common Applications: The JBL COL800 slim column loudspeaker is ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Specifications: Frequency Range (-10 dB)¹: 85 Hz – 20 kHz Frequency Response (+/-3 dB): 125 Hz – 18 kHz Power Rating (8? setting)2: 300W Continuous Program (2 hrs) 150W (600W peak) Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs) Sensitivity (2.83V @ 1m): 88 dB Coverage Pattern: Vertical 60° [1 kHz-4 kHz average]; 10° down-tilt to vertical aiming axis for +20°/-40° coverage in relation to physical cabinet aim Horizontal 160° [1 kHz – 4 kHz average] Directivity (Q): 8.1 Directivity Index (DI): 9.1 dB Rated Maximum SPL: 110 dB Continuous (116 dB peak) @ 1m Nominal Impedance: 8? (in Thru/direct mode) Minimum Impedance: 7.7 ?@ 290 Hz Transformer Taps: 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8? thru, selectable via switch Transformer Insertion Loss: Less than 1 dB for all taps Maximum Input Voltage: 33 V RMS (2 hrs), 66 V peak Recommended Protective High-Pass: 75 Hz for 8 ? operation; 60 Hz for all transformer tap settings (60W, 30W, 15W and 7.5W). Drivers: Four 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers Two 20 mm (0.8 in.) tweeters (tweeters located at top of array for better coverage of listening space) Enclosure Material: PC + ABS, UL94-V0 flammability rating Grille: Plated SPCC with polyester powder coat finish Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE Environmental Rating: IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006] Terminals: 4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in) Insert Points: Back Panel: 2 threaded insert points for WALL BRACKET, attaches via included M6 x 20 mm bolts, flat washers, & lock washers; plus 1 threaded insert point for secondary safety cable, M6 threaded x 20 mm deep. Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKET; attaches via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.)[Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 28 mm deep.] Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKET; attaches via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.] Mounting: Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall). WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attached together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method. Dimensions (H x W x D): 800 x 102 x 93 mm (31.5 x 4.1 x 3.7 inches) Net Weight: 5.2 kg (11.5 lbs) each Shipping Weight: 6.4 kg (14.0 lbs) each (packed 1 speaker per carton) Included Accessories: Low-profile SWIVEL (PAN) / TILT WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: JBL-COL800-BK* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Lautsprecher Mitteltner JBL 705G, fr TI 5000, TI3000, L90, L80 usw.. Jeglicher Ausschluss von Sachmangelhaftung und Garantie Keine Rcknnahme

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio JBL COL800-WH 32 White 70V Commercial Slim Column Wall Mount Array Speaker --> Click Thumbnails to Enlarge Condition and Warranty Condition: OPEN BOX Warranty: 1 YEAR AUDIOSAVINGS Product Description Description: The JBL COL800 is an elegant 32-inch (800 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage of most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor. A combination of stylish design and outstanding performance features makes the COL800 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Four 5-inch x 2.25-inch racetrack woofers provide maximum radiating area in a column form factor. Dual tweeters are located at top of the array for less obstructed coverage of the listening space, and they are aimed at a 10° down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall. A 60-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 150W continuous (600W peak, 2 hrs). The 85 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech. Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall). The COL800 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Features:Four 5-inch x 2.25-inch (125 x 55 mm) racetrack woofers & two 0.8-inch (20 mm) tweeters 32 inches tall with shallow 3.7-inch (93 mm) cabinet depth Wide 160° horizontal and focused 60° vertical coverage 10° downward tilt to dispersion aim for covering most listening areas without requiring physical down-tilting of the cabinet 150W continuous pink noise power handling (600W peak) 85 Hz – 20 kHz frequency range Built-in 60W 70V/100V multi-tap transformer, plus 8 ohm direct input 116 dB peak SPL (110 dB continuous), 2 hrs Dual tweeters near top of column for unobstructed coverage of listening space Versatile mounting brackets included -- both close-to-wall L-brackets and low-profile swivel(pan)/tilt wall bracketColor: White Common Applications: The JBL COL800 slim column loudspeaker is ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Specifications: Frequency Range (-10 dB)¹: 85 Hz – 20 kHz Frequency Response (+/-3 dB): 125 Hz – 18 kHz Power Rating (8? setting)2: 300W Continuous Program (2 hrs) 150W (600W peak) Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs) Sensitivity (2.83V @ 1m): 88 dB Coverage Pattern: Vertical 60° [1 kHz-4 kHz average]; 10° down-tilt to vertical aiming axis for +20°/-40° coverage in relation to physical cabinet aim Horizontal 160° [1 kHz – 4 kHz average] Directivity (Q): 8.1 Directivity Index (DI): 9.1 dB Rated Maximum SPL: 110 dB Continuous (116 dB peak) @ 1m Nominal Impedance: 8? (in Thru/direct mode) Minimum Impedance: 7.7 ?@ 290 Hz Transformer Taps: 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8? thru, selectable via switch Transformer Insertion Loss: Less than 1 dB for all taps Maximum Input Voltage: 33 V RMS (2 hrs), 66 V peak Recommended Protective High-Pass: 75 Hz for 8 ? operation; 60 Hz for all transformer tap settings (60W, 30W, 15W and 7.5W). Drivers: Four 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers Two 20 mm (0.8 in.) tweeters (tweeters located at top of array for better coverage of listening space) Enclosure Material: PC + ABS, UL94-V0 flammability rating Grille: Plated SPCC with polyester powder coat finish Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE Environmental Rating: IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006] Terminals: 4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in) Insert Points: Back Panel: 2 threaded insert points for WALL BRACKET, attaches via included M6 x 20 mm bolts, flat washers, & lock washers; plus 1 threaded insert point for secondary safety cable, M6 threaded x 20 mm deep. Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKET; attaches via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.)[Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 28 mm deep.] Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKET; attaches via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.] Mounting: Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall). WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attached together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method. Dimensions (H x W x D): 800 x 102 x 93 mm (31.5 x 4.1 x 3.7 inches) Net Weight: 5.2 kg (11.5 lbs) each Shipping Weight: 6.4 kg (14.0 lbs) each (packed 1 speaker per carton) Included Accessories:Low-profile SWIVEL (PAN) / TILT WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: JBL-COL800-WH* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio JBL COL800-BK 32 Black 70V Commercial Slim Column Wall Mount Array Speaker --> Click Thumbnails to Enlarge Condition and Warranty Condition: OPEN BOX Warranty: 1 YEAR AUDIOSAVINGS Product Description Description: The JBL COL800 is an elegant 32-inch (800 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage of most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor. A combination of stylish design and outstanding performance features makes the COL800 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Four 5-inch x 2.25-inch racetrack woofers provide maximum radiating area in a column form factor. Dual tweeters are located at top of the array for less obstructed coverage of the listening space, and they are aimed at a 10° down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall. A 60-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 150W continuous (600W peak, 2 hrs). The 85 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech. Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall). The COL800 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Features:Four 5-inch x 2.25-inch (125 x 55 mm) racetrack woofers & two 0.8-inch (20 mm) tweeters 32 inches tall with shallow 3.7-inch (93 mm) cabinet depth Wide 160° horizontal and focused 60° vertical coverage 10° downward tilt to dispersion aim for covering most listening areas without requiring physical down-tilting of the cabinet 150W continuous pink noise power handling (600W peak) 85 Hz – 20 kHz frequency range Built-in 60W 70V/100V multi-tap transformer, plus 8 ohm direct input 116 dB peak SPL (110 dB continuous), 2 hrs Dual tweeters near top of column for unobstructed coverage of listening space Versatile mounting brackets included -- both close-to-wall L-brackets and low-profile swivel(pan)/tilt wall bracketColor: Black Common Applications: The JBL COL800 slim column loudspeaker is ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Specifications: Frequency Range (-10 dB)¹: 85 Hz – 20 kHz Frequency Response (+/-3 dB): 125 Hz – 18 kHz Power Rating (8? setting)2: 300W Continuous Program (2 hrs) 150W (600W peak) Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs) Sensitivity (2.83V @ 1m): 88 dB Coverage Pattern: Vertical 60° [1 kHz-4 kHz average]; 10° down-tilt to vertical aiming axis for +20°/-40° coverage in relation to physical cabinet aim Horizontal 160° [1 kHz – 4 kHz average] Directivity (Q): 8.1 Directivity Index (DI): 9.1 dB Rated Maximum SPL: 110 dB Continuous (116 dB peak) @ 1m Nominal Impedance: 8? (in Thru/direct mode) Minimum Impedance: 7.7 ?@ 290 Hz Transformer Taps: 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8? thru, selectable via switch Transformer Insertion Loss: Less than 1 dB for all taps Maximum Input Voltage: 33 V RMS (2 hrs), 66 V peak Recommended Protective High-Pass: 75 Hz for 8 ? operation; 60 Hz for all transformer tap settings (60W, 30W, 15W and 7.5W). Drivers: Four 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers Two 20 mm (0.8 in.) tweeters (tweeters located at top of array for better coverage of listening space) Enclosure Material: PC + ABS, UL94-V0 flammability rating Grille: Plated SPCC with polyester powder coat finish Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE Environmental Rating: IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006] Terminals: 4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in) Insert Points: Back Panel: 2 threaded insert points for WALL BRACKET, attaches via included M6 x 20 mm bolts, flat washers, & lock washers; plus 1 threaded insert point for secondary safety cable, M6 threaded x 20 mm deep. Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKET; attaches via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.)[Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 28 mm deep.] Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKET; attaches via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.] Mounting: Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall). WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attached together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method. Dimensions (H x W x D): 800 x 102 x 93 mm (31.5 x 4.1 x 3.7 inches) Net Weight: 5.2 kg (11.5 lbs) each Shipping Weight: 6.4 kg (14.0 lbs) each (packed 1 speaker per carton) Included Accessories: Low-profile SWIVEL (PAN) / TILT WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: JBL-COL800-BK* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

JBL 035TI TITANIUM DOME TWEETER/ 4312A 4406 4408 4410 4412 L20T L60T L80T L100T. Used in good working conditions. Cosmetically it shows some normal used. Please see pictures for details.

Gebrauchter JBL 050TI Hochtöner stammt aus der L Serie. Daher ist auch die entsprechende Blende dabei.Für die TI Serie muß der TI Ring vom Hochtöner umgeklebt werden, aber Kenner wissen das.Der Draht ist oben geteilt und nicht gebrochen. Ich habe zwei Hochtöner und beide an der gleichen Stelle geteiltist kein Zufall.Optisch gut siehe Fotos und technisch einwandfrei. Die Ware wird unter Ausschluß jeglicher Gewährleistung verkauft, da Privatverkauf

This listing is for a single (1) JBL 035Ti titanium dome tweeter, removed from a L20T speaker I have parted out. Tweeter has been tested prior to removal & sounds great. It is in very good working condition. The titanium dome is in fantastic shape with no dents. Cosmetic condition is good for its age. DCR = 4.3. Tweeter will be packaged with a plastic cap over the screen to protect it during shipping.

This listing is for a single (1) original JBL speaker logo/emblem /badge. I have 2 available at the start of the listing. IF YOU WANT BOTH, ENTER QTY. 2 AT CHECKOUT. These were removed from a pair of L20T speakers I have parted out, & were used on many different models. Each badge measures 1 3/16 by 1. Both stick pins are intact.Badges are metal (not aluminum).

2 JBL L80T. Bottom risers

2 JBL 104H-2 Midrange L80T.

2 JBL 104H-2 Midrange L80T.

2 JBL L80T. Bottom risers

~Vintage~ JBL 104 H-2 Original Midrange speaker for L80 Ti3 L100 T 4410 4412 Excellent Condition Attention: We Ship UPS, USPS and depending on the item. Please, always view pics closely before bidding ! We are a reputable Stereo Store with 45 years experience. Professionally Serviced, Cleaned and Tested by our Technicians. World Class packaging guaranteed to arrive as shown in the pictures. Lower 48 States only Please.

For Sale is a original JBL titanium dome Tweeter Speaker not working for parts or repair. It was removed from a L5 this may fit in many other speakers in the L series. There are no dents or pushed in dome there are no tears or scratches. SOLD AS IS FOR PARTS OR REPAIR NO RETURNS. Comes as you see it with screws. Please see photos for complete details. weight: 3 lbs. Part # 035TIA. also listing other L5 parts. Flat rate shipping of $8.00 to the lower 48 states. I do take pride in packaging and I will pack with great care at no extra charge, poly bags, foam shims, wire ties, Bubble wrap etc. I prefer paypal, cashier ck, payment within 3 days after auction, Please buy with confidence see my feedbacks, Sold as is. Good luck and Thanks for looking, Chris Track Page Views WithAuctivas Counter

Pair of Original JBL L80T 5 MIDRANGE driver #104H-2 4410 4412 4410a Drivers test strong on multimeter and are in very good cosmetic condition. Please see photos for close ups and more details. Let me know if you have any questions. Will be carefully packed for a safe arrival. Thanks!

GS Audio Inc. is not the owner or seller of these goods, but merely a bailee acting on behalf of the seller to facilitate the sale of the goods by holding the goods until such time as a sale is completed and the goods are shipped to the buyer. GS Audio Inc. has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type, condition and image of the goods at the time of sale. GS Audio Inc. makes no express or implied warranties or representations regarding the condition or suitability of the goods and to the extent allowed by law, specifically disclaims any express or implied warranties, including but not limited to any warranty of merchantability or fitness for purpose. GS Audio Inc. reserves the right to cancel bids on any item due to feedback. This Listing Powered By

Came off 4410 monitorscome as seentested and both do not workone of the screens is loose on one side as seensold AS-IS for repairNo Returns

~Vintage~ JBL 104 H-2 Original Midrange speaker for L80 Ti3 L100 T 4410 4412 Excellent Condition Attention: We Ship UPS, USPS and depending on the item. Please, always view pics closely before bidding ! We are a reputable Stereo Store with 45 years experience. Professionally Serviced, Cleaned and Tested by our Technicians. World Class packaging guaranteed to arrive as shown in the pictures. Lower 48 States only Please.

jbl lautsprecher boxen L80 T Gi, Die Boxen sind gebraucht, und haben leichte Gebrauchsspuren. Vor 5 Jhren wurden die Basslautsprecher ausgetauscht, weil die Membrane wegen Altersschwäche porös waren. Das wurde in einem HiFigeschäft gemacht. Daher vielleicht auch die Beschädigung. Die Boxen haben einen außergewöhnlichen Klang und sind voll funktionstüchtig. Das ist ein Privatverkauf, daher gibt es keine Rücknahme.Ich weiß nicht wie ich die Boxen verschicken kann, deswegen würde ich mit dem Käufer gerne abklären wie wir vorgehen. Bei Selbstbholung erübrigt sich alles weitere.

JBL 104H-2 Midrange Speaker Studio Monitor 4410 4412 L80T L100T, Track Page Views WithAuctivas Counter