GENUINE JBL REMOTE CONTROL FOR JBL DCR600 II A/V AUDIO/VIDEO RECEIVER.ITEM IS IN VERY GOOD COSMETIC AND PHYSICAL CONDITION.TESTED. IT WORKS GREAT BATTERY INCLUDED.INCLUDES ONLY ITEM PICTURED.PLEASE VIEW PHOTOS FOR MORE DETAILS AND EXACT COSMETIC AND PHYSICAL CONDITION.BUY WITH CONFIDENCE. WE ACCEPT PAYPAL AND SHIP ONLY WITHIN THE USA.RETURN ACCEPTED.ITEM WILL BE SHIPPED ONCE THE PAYMENT IS RECEIVED.GOOD LUCK BUYERS!

JBL Control 28T 8 60w 70v Commercial Indoor/Outdoor Speakers (ROC037141). ????????? ??????: Used. ?????????: USPS Ground Advantage.

I have 4 Pendant Subwoofer with Crossovers for sale.The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions. General SpecificationsFrequency Range (-10 dB)42 Hz – 350 HzFrequency Response (± 3 dB)55 Hz – 125 HzPower Capacity300 Watts Continuous Program Power, 100 hrs ; 150 Watts Continuous Pink Noise, 100 hrsNominal Sensitivity (2.83V/1m)88 dBRated Maximum SPL107 dB @ 1 m (3.3 ft) average, 113 dB peakRated Impedance8 ohmsTransformer Taps110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8Transformer Insertion Loss0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110WStandalone HookupConnect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Subwoofer-Satellite HookupFor either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16) regardless whether tap selector is set to low-Z or 70V/100V. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Transducer200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.EnvironmentalExceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof ratingTerminationSix removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.SuspensionTwo identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).Safety AgencySpeaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.Included AccessoriesTwo suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.Optional AccessoriesMTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire.DimensionsDiameter333 mm (13.1 in)Depth344 mm (13.6 in) height to top of cabinet ; 369 mm (14.5 in) to top of suspension bracket.Net Weight7.6 kg (16.7 lb)Shipping Weight17.6 kg (38.7 lbs) per pair-packed carton

I have 4 Pendant Subwoofer with Crossovers for sale.The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions. General SpecificationsFrequency Range (-10 dB)42 Hz – 350 HzFrequency Response (± 3 dB)55 Hz – 125 HzPower Capacity300 Watts Continuous Program Power, 100 hrs ; 150 Watts Continuous Pink Noise, 100 hrsNominal Sensitivity (2.83V/1m)88 dBRated Maximum SPL107 dB @ 1 m (3.3 ft) average, 113 dB peakRated Impedance8 ohmsTransformer Taps110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8Transformer Insertion Loss0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110WStandalone HookupConnect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Subwoofer-Satellite HookupFor either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16) regardless whether tap selector is set to low-Z or 70V/100V. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Transducer200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.EnvironmentalExceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof ratingTerminationSix removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.SuspensionTwo identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).Safety AgencySpeaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.Included AccessoriesTwo suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.Optional AccessoriesMTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire.DimensionsDiameter333 mm (13.1 in)Depth344 mm (13.6 in) height to top of cabinet ; 369 mm (14.5 in) to top of suspension bracket.Net Weight7.6 kg (16.7 lb)Shipping Weight17.6 kg (38.7 lbs) per pair-packed carton

I have 4 Pendant Subwoofer with Crossovers for sale.The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions. General SpecificationsFrequency Range (-10 dB)42 Hz – 350 HzFrequency Response (± 3 dB)55 Hz – 125 HzPower Capacity300 Watts Continuous Program Power, 100 hrs ; 150 Watts Continuous Pink Noise, 100 hrsNominal Sensitivity (2.83V/1m)88 dBRated Maximum SPL107 dB @ 1 m (3.3 ft) average, 113 dB peakRated Impedance8 ohmsTransformer Taps110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8Transformer Insertion Loss0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110WStandalone HookupConnect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Subwoofer-Satellite HookupFor either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16) regardless whether tap selector is set to low-Z or 70V/100V. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Transducer200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.EnvironmentalExceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof ratingTerminationSix removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.SuspensionTwo identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).Safety AgencySpeaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.Included AccessoriesTwo suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.Optional AccessoriesMTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire.DimensionsDiameter333 mm (13.1 in)Depth344 mm (13.6 in) height to top of cabinet ; 369 mm (14.5 in) to top of suspension bracket.Net Weight7.6 kg (16.7 lb)Shipping Weight17.6 kg (38.7 lbs) per pair-packed carton

Title: JBL Control 28 Black 60 W Wired Indoor/Outdoor Bookshelf Speakers Condition: Good - shows some signs of wear Functionality: Functionality not tested Condition of item is as pictured. Some scratches, scuffs, and other blemishes may exist in keeping with the items age. Please see images for added details and reach out with questions before making a bid! Combined Shipment: We offer combined shipping for select items containing multiple items. Not all items are eligible for combined shipping. Some items may be excluded from combined shipping rate adjustments. Thank you for your purchase from Americas Thrift Stores Online! Visit shopATS.com for unique secondhand treasures, gems, and one of a kind collectibles from Americas Thrift Stores, all posted daily! Enjoying your purchase? Please consider leaving us a review! Business Hours of Operation: Monday - Friday from 8 AM - 4 PM CT. Orders are shipped Monday - Friday during business hours. We do our best to get back to you in less than 24 hours. If you are contacting us on the weekend, please allow up to 1 Business day to receive a response. We care about your concerns and will get back to you as soon as possible!

Pair JBL Control 28 8 60w 70v Commercial Indoor/Outdoor Speakers In good condition please look at the pictures one of the whole cover in the speaker is missing as shown

One JBL Control 28T-60 High Output Indoor/ Outdoor Background/ Foreground Loudspeaker.Working, excellent sound.The Control® 28T is the largest of JBL Professional’s Control Contractor Series indoor/outdoor loudspeakers.FeaturesIsolation transformer for 70.7 V / 100 V distributed-line sound systems.Components: 8 in Polypropylene coated woofer, 1 in Titanium coated horn loaded tweeter.Built-in InvisiBall® mounting hardware*.Weather resistant enclosure and transducers.Readily paintable.90° x 90° high frequency horn.Overload Protection Circuitry.The Control® 28T is the largest of JBL Professional’s Control Contractor Series indoor/outdoor loudspeakers.Isolation transformer for 70.7 V / 100 V distributed-line sound systems.Components: 8 in Polypropylene coated woofer, 1 in Titanium coated horn loaded tweeter.Built-in InvisiBall® mounting hardware*.Weather resistant enclosure and transducers.Readily paintable.90° x 90° high frequency horn.Overload Protection Circuitry.SPECIFICATIONSFrequency Range: 55Hz to 15kHz (-10 dB)Power Capacity: 175 W Continuous Program Power; 87 W Continuous Pink NoiseTransformer Taps:100 V Line: 60 W, 30 W, 15 W70 V Line: 60 W, 30 W, 15 W, 7.5 WNominal Max Output by Tap (dB-SPL @ 1m) 100V Input:Tap#1: 102 dBTap#2: 105 dBTap#3: 107 dBTap#4: (do not use)Nominal Max Output by Tap (dB-SPL @ 1m) 70.7V Input:Tap#1: 99 dBTap#2: 102 dBTap#3: 105 dBTap#4: 107 dBCoverage Angle: 90° x 90°Directivity Factor (Q): 7.5 dBDirectivity Index (DI): 8.8 dBCrossover Frequency: 2.8kHzLF Driver: 200mm (8 in) Polypropylene cone with WeatherEdgeHF Driver: 25mm (1 in) Titanium coated polycarbonateEnclosure Material: HIPS (High Impact Polystyrene)Overload Protection: Full-Range power limiting to protect network and transducersTermination: Spring terminals, accepts banana plugEnvironmental: Conforms to Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating.Dimensions (H x W x D): 380 x 280 x 220 mm (15.0 x 11.0 x 8.6 in.)Net Weight (each): 6.5kg (14.3 lb)Shipping Weight (each): 15kg (33 lb)

I have 4 Pendant Subwoofer with Crossovers for sale.The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions. General SpecificationsFrequency Range (-10 dB)42 Hz – 350 HzFrequency Response (± 3 dB)55 Hz – 125 HzPower Capacity300 Watts Continuous Program Power, 100 hrs ; 150 Watts Continuous Pink Noise, 100 hrsNominal Sensitivity (2.83V/1m)88 dBRated Maximum SPL107 dB @ 1 m (3.3 ft) average, 113 dB peakRated Impedance8 ohmsTransformer Taps110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8Transformer Insertion Loss0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110WStandalone HookupConnect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Subwoofer-Satellite HookupFor either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16) regardless whether tap selector is set to low-Z or 70V/100V. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Transducer200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.EnvironmentalExceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof ratingTerminationSix removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.SuspensionTwo identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).Safety AgencySpeaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.Included AccessoriesTwo suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.Optional AccessoriesMTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire.DimensionsDiameter333 mm (13.1 in)Depth344 mm (13.6 in) height to top of cabinet ; 369 mm (14.5 in) to top of suspension bracket.Net Weight7.6 kg (16.7 lb)Shipping Weight17.6 kg (38.7 lbs) per pair-packed carton

One JBL Control 28T-60 High Output Indoor/ Outdoor Background/ Foreground Loudspeaker.Working, excellent sound.The Control® 28T is the largest of JBL Professional’s Control Contractor Series indoor/outdoor loudspeakers.FeaturesIsolation transformer for 70.7 V / 100 V distributed-line sound systems.Components: 8 in Polypropylene coated woofer, 1 in Titanium coated horn loaded tweeter.Built-in InvisiBall® mounting hardware*.Weather resistant enclosure and transducers.Readily paintable.90° x 90° high frequency horn.Overload Protection Circuitry.The Control® 28T is the largest of JBL Professional’s Control Contractor Series indoor/outdoor loudspeakers.Isolation transformer for 70.7 V / 100 V distributed-line sound systems.Components: 8 in Polypropylene coated woofer, 1 in Titanium coated horn loaded tweeter.Built-in InvisiBall® mounting hardware*.Weather resistant enclosure and transducers.Readily paintable.90° x 90° high frequency horn.Overload Protection Circuitry.SPECIFICATIONSFrequency Range: 55Hz to 15kHz (-10 dB)Power Capacity: 175 W Continuous Program Power; 87 W Continuous Pink NoiseTransformer Taps:100 V Line: 60 W, 30 W, 15 W70 V Line: 60 W, 30 W, 15 W, 7.5 WNominal Max Output by Tap (dB-SPL @ 1m) 100V Input:Tap#1: 102 dBTap#2: 105 dBTap#3: 107 dBTap#4: (do not use)Nominal Max Output by Tap (dB-SPL @ 1m) 70.7V Input:Tap#1: 99 dBTap#2: 102 dBTap#3: 105 dBTap#4: 107 dBCoverage Angle: 90° x 90°Directivity Factor (Q): 7.5 dBDirectivity Index (DI): 8.8 dBCrossover Frequency: 2.8kHzLF Driver: 200mm (8 in) Polypropylene cone with WeatherEdgeHF Driver: 25mm (1 in) Titanium coated polycarbonateEnclosure Material: HIPS (High Impact Polystyrene)Overload Protection: Full-Range power limiting to protect network and transducersTermination: Spring terminals, accepts banana plugEnvironmental: Conforms to Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating.Dimensions (H x W x D): 380 x 280 x 220 mm (15.0 x 11.0 x 8.6 in.)Net Weight (each): 6.5kg (14.3 lb)Shipping Weight (each): 15kg (33 lb)

I have 4 Pendant Subwoofer with Crossovers for sale.The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions. General SpecificationsFrequency Range (-10 dB)42 Hz – 350 HzFrequency Response (± 3 dB)55 Hz – 125 HzPower Capacity300 Watts Continuous Program Power, 100 hrs ; 150 Watts Continuous Pink Noise, 100 hrsNominal Sensitivity (2.83V/1m)88 dBRated Maximum SPL107 dB @ 1 m (3.3 ft) average, 113 dB peakRated Impedance8 ohmsTransformer Taps110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8Transformer Insertion Loss0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110WStandalone HookupConnect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Subwoofer-Satellite HookupFor either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16) regardless whether tap selector is set to low-Z or 70V/100V. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Transducer200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.EnvironmentalExceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof ratingTerminationSix removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.SuspensionTwo identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).Safety AgencySpeaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.Included AccessoriesTwo suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.Optional AccessoriesMTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire.DimensionsDiameter333 mm (13.1 in)Depth344 mm (13.6 in) height to top of cabinet ; 369 mm (14.5 in) to top of suspension bracket.Net Weight7.6 kg (16.7 lb)Shipping Weight17.6 kg (38.7 lbs) per pair-packed carton

One JBL Control 28T-60 High Output Indoor/ Outdoor Background/ Foreground Loudspeaker.Working, excellent sound.The Control® 28T is the largest of JBL Professional’s Control Contractor Series indoor/outdoor loudspeakers.FeaturesIsolation transformer for 70.7 V / 100 V distributed-line sound systems.Components: 8 in Polypropylene coated woofer, 1 in Titanium coated horn loaded tweeter.Built-in InvisiBall® mounting hardware*.Weather resistant enclosure and transducers.Readily paintable.90° x 90° high frequency horn.Overload Protection Circuitry.The Control® 28T is the largest of JBL Professional’s Control Contractor Series indoor/outdoor loudspeakers.Isolation transformer for 70.7 V / 100 V distributed-line sound systems.Components: 8 in Polypropylene coated woofer, 1 in Titanium coated horn loaded tweeter.Built-in InvisiBall® mounting hardware*.Weather resistant enclosure and transducers.Readily paintable.90° x 90° high frequency horn.Overload Protection Circuitry.SPECIFICATIONSFrequency Range: 55Hz to 15kHz (-10 dB)Power Capacity: 175 W Continuous Program Power; 87 W Continuous Pink NoiseTransformer Taps:100 V Line: 60 W, 30 W, 15 W70 V Line: 60 W, 30 W, 15 W, 7.5 WNominal Max Output by Tap (dB-SPL @ 1m) 100V Input:Tap#1: 102 dBTap#2: 105 dBTap#3: 107 dBTap#4: (do not use)Nominal Max Output by Tap (dB-SPL @ 1m) 70.7V Input:Tap#1: 99 dBTap#2: 102 dBTap#3: 105 dBTap#4: 107 dBCoverage Angle: 90° x 90°Directivity Factor (Q): 7.5 dBDirectivity Index (DI): 8.8 dBCrossover Frequency: 2.8kHzLF Driver: 200mm (8 in) Polypropylene cone with WeatherEdgeHF Driver: 25mm (1 in) Titanium coated polycarbonateEnclosure Material: HIPS (High Impact Polystyrene)Overload Protection: Full-Range power limiting to protect network and transducersTermination: Spring terminals, accepts banana plugEnvironmental: Conforms to Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating.Dimensions (H x W x D): 380 x 280 x 220 mm (15.0 x 11.0 x 8.6 in.)Net Weight (each): 6.5kg (14.3 lb)Shipping Weight (each): 15kg (33 lb)

Conquers Bass-deficient Sound Reproduction Suffering from bass-deficient sound reproduction? The JBL Control 60PS/T is the solution to your problem. This direct-radiating pendant-style subwoofer delivers high-impact low-end extension, and it includes a passive crossover for up to four satellite speakers. At Sweetwater, we appreciate the Control 60PS/T’s top-flight, low-distortion design. Its long-excursion 8 low-frequency driver boasts a butyl rubber surround for well-damped, tight sound quality and long-term reliability, along with a polypropylene-coated cone for humidity protection. What’s more, its high-temperature 2 voice coil and low-mass fiberglass coil former yield superior transient response and stability under high-power, high-duty cycle conditions. If you desire high-fidelity sound for your restaurant, retail store, music café, health club, theme bar, or leisure venue, the Control 60PS/T delivers the goods.JBL Control 60PS/T Pedant-style Subwoofer Features: 150-watt, 8-ohm, direct-radiating pendant-style subwoofer Delivers high-impact low-end extension with minimal distortion Passive crossover for up to 4 satellite speakers Long-excursion 8 Sweetwater is an Authorized JBL Dealer Genuine Open Box Item Sweetwaters 2-year warranty JBL Control 60PS/T Pendant Subwoofer Pair - Black 150-watt, 8-ohm Pendant-style Subwoofer with 8 Driver and Crossover - Black (pair) Conquers Bass-deficient Sound Reproduction Suffering from bass-deficient sound reproduction? The JBL Control 60PS/T is the solution to your problem. This direct-radiating pendant-style subwoofer delivers high-impact low-end extension, and it includes a passive crossover for up to four satellite speakers. At Sweetwater, we appreciate the Control 60PS/T’s top-flight, low-distortion design. Its long-excursion 8 low-frequency driver boasts a butyl rubber surround for well-damped, tight sound quality and long-term reliability, along with a polypropylene-coated cone for humidity protection. What’s more, its high-temperature 2 voice coil and low-mass fiberglass coil former yield superior transient response and stability under high-power, high-duty cycle conditions. If you desire high-fidelity sound for your restaurant, retail store, music café, health club, theme bar, or leisure venue, the Control 60PS/T delivers the goods.JBL Control 60PS/T Pedant-style Subwoofer Features: 150-watt, 8-ohm, direct-radiating pendant-style subwoofer Delivers high-impact low-end extension with minimal distortion Passive crossover for up to 4 satellite speakers Long-excursion 8 low-frequency driver yields top-flight sound Butyl rubber surround provides well-damped, tight sound quality and long-term reliability Polypropylene-coated cone ensures maximum humidity protection High-temperature 2 voice coil and low-mass fiberglass coil former yield superior transient response and stability Ideal for restaurants, retail stores, music cafés, health clubs, theme bars, and leisure venues SpecificationDetail Power Configuration Full-range LF Driver Size 8 Woofer Total Power 150W 70V/100V Output 70V/100V: 110W, 55W, 30W, 15W (70V only) Impedance 8 ohms Inputs 6 x Locking 2-pin Frequency Range (-10 dB)42 Hz - 350 Hz Maximum Peak SPL 107 dB SPL @ 1m Enclosure Material High-impact Polystyrene Application Indoor Mounting Options Suspended Height 13.6 Width 13.1 Weight 16.7 lbs. RETURN INFORMATION We want you to be completely happy with your purchase from Sweetwater. If you are not satisfied with your product, you may return it for a refund of the purchase price within 30 days. If your purchase was eligible for Free Shipping, the shipping cost will be deducted from your credit or refund. Returns must be in the complete and original packaging with all accessories and complete documentation (Owners Manual, warranty card, quick start guides, etc.), show no signs of wear or use, and include a Return Authorization number or be subject to a restocking fee. Fast, FREE Shipping! Nearly every order received by 3PM Eastern ships the SAME DAY! FREE shipping to lower 48 states. Our central location reaches most states in 1-4 business days 99.95% warehouse accuracy We are proud to provide some of the fastest turnaround times on eBay. We use FedEx or UPS for most items, and USPS for smaller items. Residents of Hawaii, Alaska, and Puerto Rico should contact us for a shipping quote. PLEASE NOTE: We cannot ship large items to PO boxes, please provide an alternate address. If you have questions, feel free to contact us. Buy with confidence! Sweetwaters been selling on eBay since 2001, with 99.9% positive feedback! More than 30 years in business World-class customer service Fast, FREE shipping Free 2-year warranty on nearly every product Free tech support from audio experts

I have 4 Pendant Subwoofer with Crossovers for sale.The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions. General SpecificationsFrequency Range (-10 dB)42 Hz – 350 HzFrequency Response (± 3 dB)55 Hz – 125 HzPower Capacity300 Watts Continuous Program Power, 100 hrs ; 150 Watts Continuous Pink Noise, 100 hrsNominal Sensitivity (2.83V/1m)88 dBRated Maximum SPL107 dB @ 1 m (3.3 ft) average, 113 dB peakRated Impedance8 ohmsTransformer Taps110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8Transformer Insertion Loss0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110WStandalone HookupConnect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Subwoofer-Satellite HookupFor either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16) regardless whether tap selector is set to low-Z or 70V/100V. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Transducer200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.EnvironmentalExceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof ratingTerminationSix removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.SuspensionTwo identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).Safety AgencySpeaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.Included AccessoriesTwo suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.Optional AccessoriesMTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire.DimensionsDiameter333 mm (13.1 in)Depth344 mm (13.6 in) height to top of cabinet ; 369 mm (14.5 in) to top of suspension bracket.Net Weight7.6 kg (16.7 lb)Shipping Weight17.6 kg (38.7 lbs) per pair-packed carton

I have 4 Pendant Subwoofer with Crossovers for sale.The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions. General SpecificationsFrequency Range (-10 dB)42 Hz – 350 HzFrequency Response (± 3 dB)55 Hz – 125 HzPower Capacity300 Watts Continuous Program Power, 100 hrs ; 150 Watts Continuous Pink Noise, 100 hrsNominal Sensitivity (2.83V/1m)88 dBRated Maximum SPL107 dB @ 1 m (3.3 ft) average, 113 dB peakRated Impedance8 ohmsTransformer Taps110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8Transformer Insertion Loss0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110WStandalone HookupConnect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Subwoofer-Satellite HookupFor either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16) regardless whether tap selector is set to low-Z or 70V/100V. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Transducer200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.EnvironmentalExceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof ratingTerminationSix removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.SuspensionTwo identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).Safety AgencySpeaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.Included AccessoriesTwo suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.Optional AccessoriesMTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire.DimensionsDiameter333 mm (13.1 in)Depth344 mm (13.6 in) height to top of cabinet ; 369 mm (14.5 in) to top of suspension bracket.Net Weight7.6 kg (16.7 lb)Shipping Weight17.6 kg (38.7 lbs) per pair-packed carton

One JBL Control 28T-60 High Output Indoor/ Outdoor Background/ Foreground Loudspeaker.Working, excellent sound.The Control® 28T is the largest of JBL Professional’s Control Contractor Series indoor/outdoor loudspeakers.FeaturesIsolation transformer for 70.7 V / 100 V distributed-line sound systems.Components: 8 in Polypropylene coated woofer, 1 in Titanium coated horn loaded tweeter.Built-in InvisiBall® mounting hardware*.Weather resistant enclosure and transducers.Readily paintable.90° x 90° high frequency horn.Overload Protection Circuitry.The Control® 28T is the largest of JBL Professional’s Control Contractor Series indoor/outdoor loudspeakers.Isolation transformer for 70.7 V / 100 V distributed-line sound systems.Components: 8 in Polypropylene coated woofer, 1 in Titanium coated horn loaded tweeter.Built-in InvisiBall® mounting hardware*.Weather resistant enclosure and transducers.Readily paintable.90° x 90° high frequency horn.Overload Protection Circuitry.SPECIFICATIONSFrequency Range: 55Hz to 15kHz (-10 dB)Power Capacity: 175 W Continuous Program Power; 87 W Continuous Pink NoiseTransformer Taps:100 V Line: 60 W, 30 W, 15 W70 V Line: 60 W, 30 W, 15 W, 7.5 WNominal Max Output by Tap (dB-SPL @ 1m) 100V Input:Tap#1: 102 dBTap#2: 105 dBTap#3: 107 dBTap#4: (do not use)Nominal Max Output by Tap (dB-SPL @ 1m) 70.7V Input:Tap#1: 99 dBTap#2: 102 dBTap#3: 105 dBTap#4: 107 dBCoverage Angle: 90° x 90°Directivity Factor (Q): 7.5 dBDirectivity Index (DI): 8.8 dBCrossover Frequency: 2.8kHzLF Driver: 200mm (8 in) Polypropylene cone with WeatherEdgeHF Driver: 25mm (1 in) Titanium coated polycarbonateEnclosure Material: HIPS (High Impact Polystyrene)Overload Protection: Full-Range power limiting to protect network and transducersTermination: Spring terminals, accepts banana plugEnvironmental: Conforms to Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating.Dimensions (H x W x D): 380 x 280 x 220 mm (15.0 x 11.0 x 8.6 in.)Net Weight (each): 6.5kg (14.3 lb)Shipping Weight (each): 15kg (33 lb)

I have 4 Pendant Subwoofer with Crossovers for sale.The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions. General SpecificationsFrequency Range (-10 dB)42 Hz – 350 HzFrequency Response (± 3 dB)55 Hz – 125 HzPower Capacity300 Watts Continuous Program Power, 100 hrs ; 150 Watts Continuous Pink Noise, 100 hrsNominal Sensitivity (2.83V/1m)88 dBRated Maximum SPL107 dB @ 1 m (3.3 ft) average, 113 dB peakRated Impedance8 ohmsTransformer Taps110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8Transformer Insertion Loss0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110WStandalone HookupConnect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Subwoofer-Satellite HookupFor either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16) regardless whether tap selector is set to low-Z or 70V/100V. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Transducer200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.EnvironmentalExceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof ratingTerminationSix removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.SuspensionTwo identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).Safety AgencySpeaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.Included AccessoriesTwo suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.Optional AccessoriesMTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire.DimensionsDiameter333 mm (13.1 in)Depth344 mm (13.6 in) height to top of cabinet ; 369 mm (14.5 in) to top of suspension bracket.Net Weight7.6 kg (16.7 lb)Shipping Weight17.6 kg (38.7 lbs) per pair-packed carton

JBL Control 30 Speaker Invisiball Ball Mount White Wall Ceiling 360 Pivot10.75 shaft to ball5-inch x 4.25-inch steel base with 4 opposing anchor holes. Return Policy:Must be returned within 30 days in same condition as sold. Buyer is responsible for return shipping. If item was Free shipping actual cost of shipping will be deducted from refund.If there is an issue with a product, please contact me immediately for a resolution. International bids only accepted if eBays Global Shipping Program is used. Buyer is responsible for any taxes, fees, tariffs or duties associated with this purchase. Contact eBay for further details.Shipping rates are for the continental US only. Alaska and Hawaii please check for shipping rates.Thanks for looking

I have 4 Pendant Subwoofer with Crossovers for sale.The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions. General SpecificationsFrequency Range (-10 dB)42 Hz – 350 HzFrequency Response (± 3 dB)55 Hz – 125 HzPower Capacity300 Watts Continuous Program Power, 100 hrs ; 150 Watts Continuous Pink Noise, 100 hrsNominal Sensitivity (2.83V/1m)88 dBRated Maximum SPL107 dB @ 1 m (3.3 ft) average, 113 dB peakRated Impedance8 ohmsTransformer Taps110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8Transformer Insertion Loss0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110WStandalone HookupConnect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Subwoofer-Satellite HookupFor either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16) regardless whether tap selector is set to low-Z or 70V/100V. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Transducer200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.EnvironmentalExceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof ratingTerminationSix removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.SuspensionTwo identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).Safety AgencySpeaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.Included AccessoriesTwo suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.Optional AccessoriesMTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire.DimensionsDiameter333 mm (13.1 in)Depth344 mm (13.6 in) height to top of cabinet ; 369 mm (14.5 in) to top of suspension bracket.Net Weight7.6 kg (16.7 lb)Shipping Weight17.6 kg (38.7 lbs) per pair-packed carton

One JBL Control 28T-60 High Output Indoor/ Outdoor Background/ Foreground Loudspeaker.Working, excellent sound.The Control® 28T is the largest of JBL Professional’s Control Contractor Series indoor/outdoor loudspeakers.FeaturesIsolation transformer for 70.7 V / 100 V distributed-line sound systems.Components: 8 in Polypropylene coated woofer, 1 in Titanium coated horn loaded tweeter.Built-in InvisiBall® mounting hardware*.Weather resistant enclosure and transducers.Readily paintable.90° x 90° high frequency horn.Overload Protection Circuitry.The Control® 28T is the largest of JBL Professional’s Control Contractor Series indoor/outdoor loudspeakers.Isolation transformer for 70.7 V / 100 V distributed-line sound systems.Components: 8 in Polypropylene coated woofer, 1 in Titanium coated horn loaded tweeter.Built-in InvisiBall® mounting hardware*.Weather resistant enclosure and transducers.Readily paintable.90° x 90° high frequency horn.Overload Protection Circuitry.SPECIFICATIONSFrequency Range: 55Hz to 15kHz (-10 dB)Power Capacity: 175 W Continuous Program Power; 87 W Continuous Pink NoiseTransformer Taps:100 V Line: 60 W, 30 W, 15 W70 V Line: 60 W, 30 W, 15 W, 7.5 WNominal Max Output by Tap (dB-SPL @ 1m) 100V Input:Tap#1: 102 dBTap#2: 105 dBTap#3: 107 dBTap#4: (do not use)Nominal Max Output by Tap (dB-SPL @ 1m) 70.7V Input:Tap#1: 99 dBTap#2: 102 dBTap#3: 105 dBTap#4: 107 dBCoverage Angle: 90° x 90°Directivity Factor (Q): 7.5 dBDirectivity Index (DI): 8.8 dBCrossover Frequency: 2.8kHzLF Driver: 200mm (8 in) Polypropylene cone with WeatherEdgeHF Driver: 25mm (1 in) Titanium coated polycarbonateEnclosure Material: HIPS (High Impact Polystyrene)Overload Protection: Full-Range power limiting to protect network and transducersTermination: Spring terminals, accepts banana plugEnvironmental: Conforms to Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating.Dimensions (H x W x D): 380 x 280 x 220 mm (15.0 x 11.0 x 8.6 in.)Net Weight (each): 6.5kg (14.3 lb)Shipping Weight (each): 15kg (33 lb)

I have 4 Pendant Subwoofer with Crossovers for sale.The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions. General SpecificationsFrequency Range (-10 dB)42 Hz – 350 HzFrequency Response (± 3 dB)55 Hz – 125 HzPower Capacity300 Watts Continuous Program Power, 100 hrs ; 150 Watts Continuous Pink Noise, 100 hrsNominal Sensitivity (2.83V/1m)88 dBRated Maximum SPL107 dB @ 1 m (3.3 ft) average, 113 dB peakRated Impedance8 ohmsTransformer Taps110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8Transformer Insertion Loss0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110WStandalone HookupConnect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Subwoofer-Satellite HookupFor either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16) regardless whether tap selector is set to low-Z or 70V/100V. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Transducer200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.EnvironmentalExceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof ratingTerminationSix removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.SuspensionTwo identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).Safety AgencySpeaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.Included AccessoriesTwo suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.Optional AccessoriesMTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire.DimensionsDiameter333 mm (13.1 in)Depth344 mm (13.6 in) height to top of cabinet ; 369 mm (14.5 in) to top of suspension bracket.Net Weight7.6 kg (16.7 lb)Shipping Weight17.6 kg (38.7 lbs) per pair-packed carton

I have 4 Pendant Subwoofer with Crossovers for sale.The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions. General SpecificationsFrequency Range (-10 dB)42 Hz – 350 HzFrequency Response (± 3 dB)55 Hz – 125 HzPower Capacity300 Watts Continuous Program Power, 100 hrs ; 150 Watts Continuous Pink Noise, 100 hrsNominal Sensitivity (2.83V/1m)88 dBRated Maximum SPL107 dB @ 1 m (3.3 ft) average, 113 dB peakRated Impedance8 ohmsTransformer Taps110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8Transformer Insertion Loss0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110WStandalone HookupConnect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Subwoofer-Satellite HookupFor either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16) regardless whether tap selector is set to low-Z or 70V/100V. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Transducer200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.EnvironmentalExceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof ratingTerminationSix removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.SuspensionTwo identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).Safety AgencySpeaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.Included AccessoriesTwo suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.Optional AccessoriesMTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire.DimensionsDiameter333 mm (13.1 in)Depth344 mm (13.6 in) height to top of cabinet ; 369 mm (14.5 in) to top of suspension bracket.Net Weight7.6 kg (16.7 lb)Shipping Weight17.6 kg (38.7 lbs) per pair-packed carton

JBL C1003P Tiefmitteltöner für JBL Control 1 Plus.Voll funktionsfähig (auf Wunsch ist ein Video vom Testlauf verfügbar) Privatverkauf unter Ausschluss jeglicher Gewährleistung!

I have 4 Pendant Subwoofer with Crossovers for sale.The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions. General SpecificationsFrequency Range (-10 dB)42 Hz – 350 HzFrequency Response (± 3 dB)55 Hz – 125 HzPower Capacity300 Watts Continuous Program Power, 100 hrs ; 150 Watts Continuous Pink Noise, 100 hrsNominal Sensitivity (2.83V/1m)88 dBRated Maximum SPL107 dB @ 1 m (3.3 ft) average, 113 dB peakRated Impedance8 ohmsTransformer Taps110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8Transformer Insertion Loss0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110WStandalone HookupConnect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Subwoofer-Satellite HookupFor either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16) regardless whether tap selector is set to low-Z or 70V/100V. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.Transducer200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.EnvironmentalExceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof ratingTerminationSix removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.SuspensionTwo identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).Safety AgencySpeaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.Included AccessoriesTwo suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.Optional AccessoriesMTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire.DimensionsDiameter333 mm (13.1 in)Depth344 mm (13.6 in) height to top of cabinet ; 369 mm (14.5 in) to top of suspension bracket.Net Weight7.6 kg (16.7 lb)Shipping Weight17.6 kg (38.7 lbs) per pair-packed carton