Infinity RSII Reference Speakers. These are floor standing. Both grills are included. These speakers are in great shape with minimal scuffs, scrapes. They look great and sound incredible. The frame of the grill on one of the speakers is cracked but can be easily repaired. See photos. The foam woofer surrounds will need to be replaced due to natural aging. These well regarded vintage Infinity speakers have one of the most unique driver configurations out there. There are 3 ribbon midrange drivers radiating front and back, two forward tweeters and one rear facing tweeter, and 2 poly woofers. While these are not the most accurate speakers ever made, many connoisseurs love them for their musicality and ability to engage the listener. These are full range speakers and are capable of deep bass. The controls on the back let you dial in all 3 frequency ranges to match your room listening position and taste. SHIPPING: WILLING TO DELIVER FOR $200 WITHIN 200 MILES OF NAPERVILLE, IL. IF YOU PREFER TO HAVE THEM SHIPPED YOU MAY CONTACT ME TO MAKE ARRANGEMENTS TO SHIP THEM AT YOUR EXPENSE. PLEASE NOTE THAT SHIPPING WEIGHT IS 200LBS PER SPEAKER AND THE DIMENSIONS FOR ONE SPEAKER AND ARE 24 X 24 X 48 INCHES. Link to manual:http://www.infinity-classics.de/technik/manuals/RS_IIA_technical_sheet.pdfACOUSTIC & ELECTRICAL SPECIFICATIONS:• Drivers: For each channel: Two 10-inch polypropylene woofers. Three EMIT tweeters, one facing rearward, and three EMIM midrange drivers• Frequency Response: 29 to 32,000 Hz ±2 dB Suggested for use with amplifiers or receivers of: 60 through 250 watts per channel RMS• Crossover Frequencies: 150Hz, 800 Hz, 4,000 Hz, and 8,000 Hz • Nominal Impedance: 4 ohms• Finish: Hand rubbed oak veneers and solids • Dimensions: 48 inches x 22 3/4 wide x 18 deep (160.6 cm x 66.25 wide x 36.25)• Shipping Weight: 200 lbs per system• Introduced in 1984• Discontinued in 1987• Original Retail Price: $2,700.00DRIVERS (TRANSDUCERS):EMIM Mid Rev. B/C .902...0012B10” WFR Poly Clear .902...2279A (Substitute only)EMIT Twt Sq/Blk .902...5086 Diaph Assy. Kit Tweeter .751...3722EMIT Diaph. Assy. Midrange .751...3806ItemIncludedOriginal BoxNot IncludedManualOnlineRemoteNot ApplicableCablesNot Included

Hello, I have for sale my Infinity Pair of Polydome RSIIIA RS IIIA 4 5 6 These are in working condition.These are in As Pictured physical condition.These will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!

Hello, I have for sale my Infinity Pair of Polydome RSIIIA RS IIIA 4 5 6 These are in working condition.These are in As Pictured physical condition.These will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!

Hello, I have for sale my Infinity Pair of Polydome RSIIIA RS IIIA 4 5 6 These are in working condition.These are in As Pictured physical condition.These will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!

Infinity EMIM Midrange Ribbon Speaker From RSIIB RS2B Reference Speaker Tested guaranteed working from large speakers parted out will be well packed and insured.

1 Infinity EMIM Midrange Ribbon Speaker RS1B RSIIB RS2B Speaker Tested. Working and Sound as It Should. ???emailortext818-3141658.

Hello, I have for sale my Infinity Pair of Polydome RSIIIA RS IIIA 4 5 6 These are in working condition.These are in As Pictured physical condition.These will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!

Pulled from a RSIIIb speaker, works properly. Foam surround was replaced at some point. I epoxied a few spots around magnet for safe shipping.

Pulled from a RSIIIb speaker, works properly. Foam surround was replaced at some point, whoever did it did a nice job. I epoxied a few spots around magnet for safe shipping.

For sale is one Infinity 10 inch woofer for RS3b speakers. newly foamed january 2024. Hello, I tested it and works perfectly. It is four ohms. Any questions, please ask. Thank you for looking.

Hello, I have for sale my Infinity Pair of Polydome RSIIIb RS IIIB 4 5 6 BThese are in working condition.These are in As Pictured physical condition.These will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!

Hello, I have for sale my Infinity Pair of Polydome RSIIIb RS IIIB 4 5 6 BThese are in working condition.These are in As Pictured physical condition.These will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!

Hello, I have for sale my Infinity Pair of Polydome RSIIIb RS IIIB 4 5 6 BThese are in working condition.These are in As Pictured physical condition.These will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!

Hello, I have for sale my Infinity Pair of Polydome RSIIIb RS IIIB 4 5 6 BThese are in working condition.These are in As Pictured physical condition.These will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!

this is for a SINGLE emit tweeter pulled from RSii speakers. if you need 2, please change the qty to 2, or 3 or 4 if you want all of them. the picture is of all the tweeters i have, and is for reference. you will receive only 1 of them. tweeter works as it should. these should fit other models listed, but do your homework before you buy. this magnet is thicker than the 490123 tweeter but should fit, it just has a litle higher power handling. again, this is for ( 1 ) tweeter only

pair of used working crossover networks for infinity RSii speakers.

Hello, I have for sale my Infinity Pair of Polydome RSIIIb RS IIIB 4 5 6 BThese are in working condition.These are in As Pictured physical condition.These will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!

Hello, I have for sale my Infinity Pair of Polydome RSIIIb RS IIIB 4 5 6 BThese are in working condition.These are in As Pictured physical condition.These will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!

Vintage used Infinity EMIM Ribbon midrange from a working RSIIa speaker. Midrange only, not the entire speaker. Very good condition, working properly. Last photo is shown for reference only, to show the model speaker this was removed from. Shipping to lower 48 states and internationally using the eBay Global Shipping Program. Free local pickup from SW Florida 33917. Please no bidders with zero transactions. Please see my feedback. Will be carefully packed. Bid with confidence.

Infinity EMIM midrange speaker pulled from a RS2B cabinet. I have all 6 EMIM speakers pulled from the two cabinets. They have all been tested for Ohms and they all range between 2.9 ohms and 3.4ohms with most of them sitting at 3.3-3.4ohms. I have not tested any for sound or audio quality. The only guarantee with these speakers is that they have continuity and will read within the ohm specs stated above. They all have a little hole or 2 in the black fabric (some kinda moth or something must have ate it) but they are not damaged on the ribbon. Some of the steel parts have slight surface rust that can be cleaned up easily. These have not been taken apart or modified. If you want a specific OHM range please let me know at checkout. If you buy multiple and want matching impedance let me know. Ask questions before checkout, there will be no returns for any reason besides damage in shipping. You must have a quality multimeter with clamping probes to prove the ribbon lost continuity from damage during shipping to start a damage return. They all have invisible to the naked eye markings to identify them to avoid fraudulent returns from part swappers. I believe they fit these models : Reference Standard 1- RS1 Reference Standard 1B-RS1A/b Reference Standard RS2A/B RS2 RS2.5 RS4.5

This listing is for ONE complete emblem. These are the original 2-piece emblems that sandwich between the speaker cover fabric. Both have all their parts including original clips. Aluminum faceplate, polymer backing plate and metal retaining clips. Came off RS-IIB set of speakers but were used in a couple different models around that time. Measures 3.5” X 1.25”

Pair of woofers from Infinity RS-IIb speakers. They need refoaming but they still transmit sound and read 3.4-3.5 ohms on every speaker. The only damage is on the foam parts and some of the paint is peeling. All the other components on the speaker are in good shape. At the time of listing I have 2 pairs available, all in the same condition. I can combine shipping if you buy all 4. You’ll have to message me first and let me know that’s what you want to do, or we can do combined shipping thru invoice/partial refund

Infinity RSIIIA Lautsprecher speakers Sicken sehen gut aus... insgesamt guter optischer Zustand Liefen noch vor 3 Wochen an ner Anlage Bitte nur Abholung in Gttingen. Das kann auch die nchsten drauf Wochen erfolgen, wenn die Zahlung sofort erfolgt. Evtl kann ich die Richtung Flensburg ab Mitte September Mal mit hoch bringen...

Hello, I am selling my Infinity RSIIIb Woofer AS-IS Scratchy Voice Coil needs re- Foam as pictured This is in As Pictured physical condition.This will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!