Immedia RPM 1 #35 audiophile grade turntable (no tonearm).This is a beautiful table with belt drive and heavy platter .Allen Perkins design and build started in 1990.Immedia of Berkeley CA ,was the first company making tables of Allen’s design before he started Spiral Groove.This table has the same concept with very heavy 35 lbs platter spun by external power supply and belt drive motor.I believe this table was made in 1999 based on rough serial number on the bottom.This is a piece of HiFi history that I purchased a few years ago and have used sparingly with a The Wand tonearm that was mounted on the wood arm board seen in photos.The black arm board is the stock unit and I have not mounted an arm but it does have a small hole drilled in the center.This table comes in the original box and I have secured the platter with the two shipping screws in the bottom to keep the platter off the Safire bearing.You must remove the two bolts in the bottom of the table for platter to function.Table has two speed 33 and 45 both can be adjusted by pots in power supply.Please feel free to ask questions and do your own research on this table I don’t think you could copy it for les then $10,000 if you look at Spiral Groove and other Immedia on line you will find this to be a very rare table.The feet on the table are tall and probably no original I have used a small stack of cork under the motor to compensate for the height.I will include those with the table or you can create your own solution.I ONLY ACCEPT BIDS AND SHIP TO LOWER 48 USA.This is a heavy table in a large box I’m happy to ship it but the cost is fixed please know this before bidding.The tonearm I used was 10.5” The Wand with Denon 103 cart and it fit fine but I believe the table to be made for 9” arms in general.