Icom IC - 718
- Condition: Used
- Price: 156.55 EUR
- Status: sold
- Item number: 305755157852
- Bids: 7
- Seller: blumengarten2014 (2429|99.7%)
- Seller information: non commercial
- Item location: Elmenhorst
- Ships to: DE
- Shipping: 4,95 EUR
- on EBAY
This listing is for an Icom FL-96 2.8KHz SSB Narrow FilterReplaces the FL-44 filter for wider, smoother sounding SSB.Tested and working perfectly. It is guaranteed good or your money back!The hard to find FL-96 is known as the 2.8KHz Wide SSB filter and gives a very pleasing sounding SSB. Couple this with a FL-70 in the 9Mhz IF and you will have some of the best audio on HF. It also makes a pretty decent narrow AM filter.You will receive the EXACT item shown in the picture.Thanks for looking!!! _gsrx_vers_1516 (GS 9.3 (1516))
This listing is for a new old stock Icom FL-53A 250Hz CW Narrow FilterTested and working perfectly. It is guaranteed good or your money back!Note, this is the newest version and it works in all Icoms calling for a FL-53 or FL-53A.You will receive the EXACT item shown in the picture.Thanks for looking!!! _gsrx_vers_1436 (GS 9.0.5 (1436))
ICOM CW NARROW FILTER FL 52A FOR IC 751 765 761 718. Condition is Used. Shipped with USPS Ground Advantage.
This listing is for an Icom FL-52A 500Hz CW Narrow FilterTested and working perfectly. It is guaranteed good or your money back!Note, this is the newest version and it works in all Icoms calling for a FL-52 or FL-52A.You will receive the EXACT item shown in the picture.Thanks for looking!!! _gsrx_vers_1516 (GS 9.3 (1516))
Icom UT-106 DSP unit for the IC-706 706MKIIG, the IC-718, 910, R75, as well as the PCR1000 and PCR1500 receivers. Works as it should, and adds value when using any of these rigs.
NO AS-IS NONSENSE I TRUST HAMS Guaranteed to work properly or your money back if you pay for insured return shipping within 48 hours of receiving it. Here is my Icom IC-718 Serial #0216630 that works great and has the MARS MOD. It has some scratches and scuffs. It comes with the UT-106 DSP module, mic, power cord and fair condition worn manual. Nothing else is included. Over 24 years on eBay and 100% positive feedback. The photos are of the actual item(s) you will receive. Please place your mouse over the photos to see larger images. Please see my other listings. Thanks a lot.73, Roger N7YV.com
Icom FL-53ADescriptionAbout This ItemsAppearance condition: averageNo accessoriesCW filterAppearancePlease judge by looking at the photo.ConditionUsed.Operation confirmed.Included ItemsShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight companies are closed.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding. Copyright (c) 2022 Fine Cycle LLC. All Rights Reserved.
This listing is for an Icom FL-53A 250Hz CW Narrow FilterTested and working perfectly. It is guaranteed good or your money back!Comes with mounting hardware and stock lead length. Works in all Icoms calling for a FL-53 or FL-53A.You will receive the EXACT item shown in the picture.Thanks for looking!!! _gsrx_vers_1516 (GS 9.3 (1516))
Icom AT-180 HF automatic antenna tuner with interface cable. Excellent match to the IC-706, 700, 718, and a few other series Icom rigs. Rated to 120 watts from 160-6 meters. Power is supplied by the radio through the included cable for a nice clean operation.
This unit is being sold as-is for parts or repair. It was previously sold to another buyer who claimed that the audio went mute when the DSP was engaged. SHIPPING/PACKAGING: All orders ship within one business day. We use only premium packaging materials and have invested in a $5000 foam-in-place system. The bottom line is this... youll receive your item on time and in perfect condition regardless of how big, heavy, or delicate your item may be! Please note that this item will ship with either USPS, FedEx, or UPS. If you have a preference regarding which carrier is used, please let us know before completing the purchase. WHATS INCLUDED IN THE SALE: You will only receive what is shown in the photographs. If you do not see it in the photos, it is likely not included in the sale. That includes manuals, packaging, power cords, etc. If you have questions about what is included, please ask before making a purchase and well be happy to clarify. ABOUT US: Our company, Ham & HiFi, is located in Sparks, NV. Everyone in the shop is a ham operator and some have been licensed for more than 50 years. Weve been selling used equipment on eBay for over ten years, and in that time weve sold well over 56,000 items and have maintained a 100% positive feedback rating. We list new items all the time, so click here to visit our eBay Store and see the latest additions to our inventory!
HM-36 Microphone Car Radio Mic 8 Pin for ICOM IC-718 IC-7200 IC-7600 G4T5 1. & high quality2. Speaker Microphone for ICOM Mobile Radio 8-Pin Plug HM-36Compatible Models: for ICOM IC-718 IC-7200 IC-7600Material: ABScolour: blackPackage Contents:1 x HM-36 MicrophoneOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
This listing is for an Icom UT-106 DSP UnitTested and working perfectly. It is guaranteed good or your money back!Note, this is the newest version and it works in all Icoms calling for a UT-106You will receive the EXACT item shown in the picture.Thanks for looking!!! _gsrx_vers_1436 (GS 9.0.5 (1436))
ICOM IC-718 100 Watts HF Transceiver. Clean radio. Seems to work right. Transmit 100% and tuner works. MARS mod. My antenna is down but RX checked good too. All knobs and VFO track right. I can send a video ans might try and figure out how to upload it. Thx. Comes with power cord and microphone and box. I can send functioning video of this radio. Sold as is.
Icom IC-718 22 Ham Radio Transceiver.
HM-36 Hand Speaker Mic microphone for ICOM Radio IC-718 IC-78 IC-765 IC-761 ICh & high quality.Clear sound and accurate communication.Comfortable to holding.Speaker microphone for ICOM Mobile Radio 8-Pin Plug HM-36Compatible with ICOM radios:IC-718 IC-78 IC-765 IC-761 IC-7200 IC-7600Material:PC + metalcolour:blackPackage Contents:1 * HM-36 8 Pin microphone For ICOM IC-28 IC-78 IC-755 IC-7200 IC-7600 Radio
ICOM IC-718 100 Watts HF Transceiver. Clean radio. Seems to work right. Transmit 100% and tuner works. MARS mod. My antenna is down but RX checked good too. All knobs and VFO track right. I can send a video ans might try and figure out how to upload it. Thx. Comes with power cord and microphone and box. I can send functioning video of this radio. Sold as is.
Product Description Details: * brand new and high quality *Compatible with Icom OPC-025D, Kenwood PG-2Z *Compatible transceiver use 6 pin power plug *Compatible model: For Kenwood: TS-50s TS-60s TS-140 TS-440, TS-450, TS-570, T 000 etc. For Icom: IC-706 IC-718 IC-746 IC-756 etc. For Alinco: DX-70T DX-70TH DX-77 etc. *16AWG wire, 30Amp fuse *Cable length: 1m (Approx.) Package Contents: 1*Power Cord Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Payment Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.Delivery details We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address. Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Contact us We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via Ask seller a question . We will reply your email within 24 working hours.
HM-36 Hand Speaker Mic microphone for ICOM Radio IC-718 IC-78 IC-765 IC-761 G8J8 & high quality.Clear sound and accurate communication.Comfortable to holding.Speaker microphone for ICOM Mobile Radio 8-Pin Plug HM-36Compatible with ICOM radios:IC-718 IC-78 IC-765 IC-761 IC-7200 IC-7600Material:PC + metalcolour:blackPackage Contents:1 * HM-36 8 Pin microphone For ICOM IC-28 IC-78 IC-755 IC-7200 IC-7600 Radio
Product Description Details: * brand new and high quality *Compatible with Icom OPC-025D, Kenwood PG-2Z *Compatible transceiver use 6 pin power plug *Compatible model: For Kenwood: TS-50s TS-60s TS-140 TS-440, TS-450, TS-570, T 000 etc. For Icom: IC-706 IC-718 IC-746 IC-756 etc. For Alinco: DX-70T DX-70TH DX-77 etc. *16AWG wire, 30Amp fuse *Cable length: 1m (Approx.) Package Contents: 1*Power Cord Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Payment Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.Delivery details We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address. Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Contact us We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via Ask seller a question . We will reply your email within 24 working hours.
HM-36 Hand Speaker Mic microphone for ICOM Radio IC-718 IC-78 IC-765 IC-761 U5N1 & high quality.Clear sound and accurate communication.Comfortable to holding.Speaker microphone for ICOM Mobile Radio 8-Pin Plug HM-36Compatible with ICOM radios:IC-718 IC-78 IC-765 IC-761 IC-7200 IC-7600Material:PC + metalcolour:blackPackage Contents:1 * HM-36 8 Pin microphone For ICOM IC-28 IC-78 IC-755 IC-7200 IC-7600 Radio
Product Description Details: * brand new and high quality *Compatible with Icom OPC-025D, Kenwood PG-2Z *Compatible transceiver use 6 pin power plug *Compatible model: For Kenwood: TS-50s TS-60s TS-140 TS-440, TS-450, TS-570, T 000 etc. For Icom: IC-706 IC-718 IC-746 IC-756 etc. For Alinco: DX-70T DX-70TH DX-77 etc. *16AWG wire, 30Amp fuse *Cable length: 1m (Approx.) Package Contents: 1*Power Cord Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Payment Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.Delivery details We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address. Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Contact us We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via Ask seller a question . We will reply your email within 24 working hours.
Live search