TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I66 Philips MiniWatt HeeRLEN code 3D2 short plates 1,2mA/1,0mA (3,2/3,0) 52/50 Most common Heerlen modelhttp://www.tube-classics.de/TC/Tubes/Valvo%20ECC83/ECC83.htm ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

PHILIPS ECC83 - 12AX7 Price is for 1 NOS or very little used tube. With O-getter with one support, ribbed folded plates and etched code I65 ????9L5 decoded for Heerlen plant in Holland. Tube is produced in the 1960s. Tested STRONG as follow! Ia1 = 0.9 mA | S1 = 1.2 mA/V | Ri1 = 60.6 | ?1 = 72.7 Ia2 = 1.3 mA | S2 = 1.6 mA/V | Ri2 = 52.6 | ?2 = 84.2 Tested at: Uf = 12,6V | Ua = 250V | Ug1 = -2,0VGood begins at: Ia = 0,7mA and 100% is Ia=1.2mA SUPERB MATCHED TUBES! Shipping will be Airmail registered with tracing number. Other shipping methods available on request.

Philips ECC83 Röhre strong tested Röhrenverstärker Tube Triode Heerlen Bitte entnehmen Sie den genauen Zustand und Lieferumfang den Bildern.Die Röhre wurde auf einem Funke W19 als sehr gut geprüft.Die Prüfergebnisse der Prüfung in mA:3,1/3,4 Wir bieten eine Vielzahl an alten Bastel -und Sammelobjekten an.Bitte beachten Sie, dass aufgrund des Alters keine Garantien auf die technischen Funktionen gegeben werden können.The parts are very old, we dont give any guarantee on the technical function. Zahlung Versand Es ist möglich Artikel für den Versand zu kombinieren, die am gleichen Wochenende gekauft werden. Es ist nicht möglich Artikel aus mehreren Wochen zusammen zu versenden. Bitte warten Sie mit der Bezahlung, bis Sie die Rechnung mit kombinierten Versandkosten erhalten. Die angepasste Rechnung erhalten Sie dann Sonntags oder Montags nach Auktionsende. Aufwendiger Versand (klimaneutral) mit DHL Premium in 2-welliger Kartonage und aufwendiger Polsterung! Versand größtenteils plastikfrei, 80 Prozent des Versandmaterial aus recyceltem Altpapier bzw. Second-Hand Kartonagen. WORLDWIDE SHIPPING ON REQUEST! PLEASE ASK BEFORE YOU BUY! Links Unser Shop Verkäuferprofil Bewertungen Shop speichern Kontakt Newsletter Verpassen Sie keine Angebote mehr! Wir informieren Sie über Angebote und Aktionen bequem per E-Mail. Newsletter abonnieren Kontakt Senden Sie uns eine Nachricht

12 x ecc83 12ax7 nos new holland heerlen Made Delta same codeIn action 12 pieces of ecc83 Same code Delta code Holland heerlen Made Nos new of bulk militaryTubes tested perfect new 100% emission

12 x ecc83 12ax7 nos new holland heerlen Made Delta same codeIn action 12 pieces of ecc83 Same code Delta code Holland heerlen Made Nos new of bulk militaryTubes tested perfect new 100% emission

1968/s 4 x matched 12ax7 ecc83 philips holland heerlen Made nos new same code.Delta8LH From military bulk Tubes new never used Perfect and strong tes

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I66 Philips MiniWatt HeeRLEN code 3D2 short plates 1,2mA/1,0mA (3,2/3,0) 52/50 Most common Heerlen modelhttp://www.tube-classics.de/TC/Tubes/Valvo%20ECC83/ECC83.htm ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

2 unidades de Ecc83 Philips, fabricadas en heerlen febrero de 1965. Mismo cdigo de fecha y fabricacin Comprobadas, poco uso Vlvula comprobada: Prueba de voltaje: Va = 250 V, Vg = -2 V Promedio 100% Gm = 1,6 mA/v; Ia = 1,2 mA RESULTADO DE LA PRUEBA: MUY FUERTE Vlvula 1:Gm = 1,6 mA/v ; Ia = 1,37 mA Vlvula 1:Gm = 1,6 mA/v; Ia = 1,36 mA Vlvula 2:Gm = 1,65 mA/v ; Ia = 1,41mA Vlvula 2:Gm = 1,7mA/v; Ia = 1,54 mA

FOR SALE ECC83 Philips Heerlen, strong pair used tube no print, factory and date code readable emission Tube 1: 132/124%Tube 2: 157/136% Gm tube 1: 146/140% tube 2 132/132% price is for the pair of two tubes

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I66 Philips MiniWatt HeeRLEN code 3D2 short plates 1,2mA/1,0mA (3,2/3,0) 52/50 Most common Heerlen modelhttp://www.tube-classics.de/TC/Tubes/Valvo%20ECC83/ECC83.htm ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

Amperex bugle boy 12AX7 ECC83 made in Heerlen Holland 1964 date code ?4J2 tested strong, see pictures

2 Philips ECC83 12AX7 good values made in Heerlen Tested on an AVO MK4 tube tester 1,20 mA - 1,60 mA / V = ????100% Measuring results of this tubes are Tube 1 Section 1 1.30 mA - 1.60 mA / V Section 2 1.20 mA - 1.55 mA / V I65 /I 3 E 3 Tube 2 Section 1 1.20 mA - 1.60 mA / V Section 2 1.10 mA - 1.60 mA / V I65 /I 3 C 1 No gas and shorts

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I66 Philips MiniWatt HeeRLEN code 3D2 short plates 1,2mA/1,0mA (3,2/3,0) 52/50 Most common Heerlen modelhttp://www.tube-classics.de/TC/Tubes/Valvo%20ECC83/ECC83.htm ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

2 Philips ECC83 12AX7 Disc Getter close matched Heerlen, Holland nos condition Tested on an AVO MK4 tube tester 1,20 mA - 1,60 mA / V = ????100% Measuring results of this tubes are Tube 1 Section 1 1.50 mA - 1.80 mA / V Section 2 1.50 mA - 1.80 mA / V I66 /I 1 L 2 Tube 2 Section 1 1.55 mA - 1.85 mA / V Section 2 1.40 mA - 1.80 mA / V I66 /I 1 L 2 No gas and shorts

OFFERED IN PERFECT CONDITION MATCHED PAIR ECC83 HEERLEN BOTH WITH SIMILAR ETS CODE I65 3L1 TESTED ON AVO VCM 163 AND MEASURING EXCELLENT TUBE 1 A1 1.25mA A2 1.35MA TUBE 2 A1 1.30mA A2 1.30MA NEW VALUE AVO = 1.2MA

OFFERED IN PERFECT CONDITION MATCHED PAIR ECC83 HEERLEN BOTH WITH SIMILAR ETS CODE I65 3L1 TESTED ON AVO VCM 163 AND MEASURING EXCELLENT TUBE 1 A1 1.25mA A2 1.35MA TUBE 2 A1 1.30mA A2 1.30MA NEW VALUE AVO = 1.2MA

AmperexBugle Boy12AX7/ECC83Short PlateO-GetterMade in Holland. Label is mostly erased. Date Code: I63 Delta 0L3Made in December 1960 in Heerlen Holland Fully tested by calibrated Hickok 539C tubes testerwith no shorts, leakage or gas. Measurement: 1400/1190where minimum good value is 875 Tested in my preamplifier to make sure working as intended with no issues at all. I will gladly combine shipping upon request. __________ The tube(s) in this sale include a 30-day satisfaction guarantee.I strive to ensure that every buyer has a completely satisfactory purchasing experience.If you are unhappy with your purchase for any reason, you can return the item for a full refund. Please contact me directly prior to opening a return or leaving feedback.I will almost always reply at least within 24 hours to remedy the situation for you with direct communication.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I66 Philips MiniWatt HeeRLEN code 3D2 short plates 1,2mA/1,0mA (3,2/3,0) 52/50 Most common Heerlen modelhttp://www.tube-classics.de/TC/Tubes/Valvo%20ECC83/ECC83.htm ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

OFFERED IN PERFECT CONDITION MATCHED PAIR ECC83 HEERLEN BOTH WITH SIMILAR ETS CODE I65 3L1 TESTED ON AVO VCM 163 AND MEASURING EXCELLENT TUBE 1 A1 1.25mA A2 1.35MA TUBE 2 A1 1.30mA A2 1.30MA NEW VALUE AVO = 1.2MA