Excellent condition and sound. Includes remote and factory packaging, plus manual and power cord. MSRP was $1195 Has MM phono input, 4 additional analog inputs and pre out. Also includes class A headphone output. 48 states only Online Review from The Audiophile Man 5/2/16 “CONCLUSION Rarely have I heard an integrated amplifier, packed so full of features and available at such a reasonable price, sound so good. The sense of clarity was a joy to behold and gave each piece of music life and sparkle. The instrumental separation was aided by the air and space within the soundstage that offered the performers time while the latter also performed with a sense of relaxation and ease and that allowed the music to flow with a sense of style. There is no doubt, the Heed Elixir is a brilliant amp and the best integrated, at this price point, that I’ve ever heard” FEATURES – 4 analogue and 1 MM phono inputs – class-A headphone amplifier – Transcap – output capacitor technology – discrete bipolar transistor architecture SPECIFICATIONS Inputs:4x line analogue / 1x MM phono Outputs:1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (spekers):10 Hz – 110 kHz Freq. response (preamp):3.5 Hz – 300 kHz Freq. response (headphones):3.5 Hz – 320 kHz Input impedance (line):10 k? Input impedance (MM):47 k? / 100 pF Input sensitivity:135 mV Power (8?):50 W / channel (55 W peak / ch) Power (4?):65 W / channel (90 W peak / ch) Max. consumption:150 W Idle consumption:20 W Weight:6 kg Dimensions (WxHxD):22 x 8.5 x 36 cm

Heed Questar MM für Phono-VorverstärkerGepflegter und voll funktionstüchtiger Gebrauchszustand mit wenigen, normalen Gebrauchspuren (siehe Bilder). Produktinformationen Heed Questar (Herstellerangaben ohne Gewähr)Heed Questar Phonovorverstärker für MM oder MC.Mögen die Questar MM und MC Phono Entzerrer auf den ersten Blick bescheiden wirken, sie sind direkte Abkömmlinge unseres Heed Quasar Phono-Entzerrers: bis auf die fehlenden Einstellmöglichkeiten und das überdimensionale Netzteil des Quasar, sind sie nichts anderes, als auf den MM- oder MC-Einsatz beschränkte a la carte- Portionen des großen Bruders. Hierbei handelt es sich bei den Questar nicht um gewöhnliche, integriert geschaltete Korrektur-Einheiten: sie sind diskret aufgebaute, hochwertige Dual-Mono- Konstruktionen. Sie können an jeden aktiven Eingang eines Voll- oder Vorverstärkers angeschlossen werden.Das technische Konzept der Questars kann im Wesentlichen als eine zweistufige passiv/aktiv-RIAA-Entzerrung bezeichnet werden. Durch die Optimierung der einzelnen Verstärkungsstufen erzielen die Phonoteile einen bestmöglichen Rauschabstand bei höchster Übersteuerungsfestigkeit. Die Ausgangsstufen, reine Class-A-Schaltungen, beinhalten keinen gewöhnlichen Differential-Verstärker. Dadurch lassen sich die Questars mit fast jeder Verstärker- Komponente kombinieren und in nahezu jede Musikanlage integrieren.Längere Kabelwege sind aufgrund der hochwertigen Ausgangsstufen problemlos möglich. Um Störeinstreuungen und Interferenzen zu vermeiden, wurden die Platinen-Layouts auf kürzeste Signalwege ausgelegt. Alle empfindlichen Bereiche sind zusätzlich abgeschirmt und es gibt keine Verkabelungen oder zusätzlichen Lötverbindungen in den Geräten. Die Questar besitzt jeweils hochwertige vergoldete RCA-Anschlüsse.Technische Daten Heed Questar (Herstellerangaben ohne Gewähr)Eingangsspannung/Impedanz 2,5mV/47 kOhm - 220 ?V/100 OhmAusgangsspannung/Impedanz 500 mV/100 OhmBandbreite 10 Hz – 100 kHz/-1 dBRIAA Genauigkeit <0,3 dB über der gesamten BandbreiteRauschabstand (A-gewichtet) 82 dB 74 dBÜbersteuerungsfestigkeit 20 dB 18 dBKanaltrennung (bei 1 kHz) >55 dBMaße (B/H/T ) in cm 9,5/7,2/25Am 24.03.24 hat der Verkäufer die folgenden Angaben hinzugefügt: Angeboten wird nur der Heed Questar MM - Netzteil nicht im Lieferumfang enthalten!

Up for sale is my infrequently used HEED Quasar III phono preamp with separate PSU. I bought this new in 2022 from Analogue Seduction in the UK. It was a major upgrade from the already decent phono pre I had. It shines brightest with a high quality MC cartridge. I was using it with my Rega Planar 3 and Apheta II cart...and I used it also with a very low output Audio Technica MC with excellent results...this thing can really handle very low output carts. This preamp truly elevated my vinyl experience. This is the European version of the Quasar III power supply, Q-PSU. I emailed Hungary-based HEED support to see if I could use a transformer with this. No problem they said, so long as the transformer is double the power requirements of the HEED. For US buyers I will include the pictured transformer at no additional charge, if you need it. Its overkill for the Quasar and dead quiet and runs very cool. If you dont need the transformer, please let me know and I wont ship it, which might save me a bit on shipping. Everything has been working perfectly for me for the past year. What follows are specs and information from HEEDs site and also the conclusion from a review on Stereophile. (As the reviewer notes, the soundstage on this pre is broad. When I got it, it was astoundingly broad, compared to my previous pre.) Trust me...this is a superb preamp that punches well above its weight. Its not inexpensive new (around $1,300 new) and difficult to source in the US. Its well built. The first two pictures in this listing are the actual units themselves. The third photo is from the Stereophile review to show you how well crafted the electronics are. I found HEEDs customer support to be super responsive and if I were building a system all over again, Id be looking at a number of their offerings. From HEED: The signal processing of cartridges is one of the most delicate jobs in amplification. All the more so because it isn’t done merely by boosting a few hundred microvolts to a few hundred millivolts. In fact, at this thousandfold amplification (60 dB) the signal must be processed as cleanly and noise-free as possible. The extremely low signal level and the frequency-dependent amplification which arises from the RIAA equalisation curve applied in the cutting of LPs make the highest demands of the circuit topology and technical realisation of a phono preamplifier. Our award-winning QUASAR phono stage, with its discrete conception and wide range of features, meets the requirements of even top-class turntable/cartridge combinations without being “unreasonable” in the usual high-end fashion. The QUASAR is built in dual-mono configuration from the power supply upwards. There are two separate amplifier stages for MM and MC cartridges, both being fed from their own regulated power supply arrangement. Optimum adjustments to the MC cartridge in use can be applied for sensitivity and load by various settings of the jumpers on the PCB. The two separate outputs with different output levels make it possible to fine match for preamps or recorders.The output stage has huge headroom at extremely low noise levels and, due to its low output impedance and high current delivery, can drive long interconnect cables without any sonic degradation.The enhanced power supply of the QUASAR, the Q-PSU that also can be used as power supply upgrade with other components, is based around a 50 VA toroidal transformer with low-density magnetic field and very little dispersion. This power, together with a fine voltage regulation system, can feed the circuit with the kind of super-clean current usually delivered only by battery-based supplies, even with extreme dynamic swings. FEATURES– separated MM and MC input stages– adjustable MC gain and impedance– discrete bipolar transistor architecture– separated power supply (see Q-PSU) SPECS Inputs:1x MM / 1x MCOutputs:1x 0dBm (High Out)/ 1x -10 dBm (Low Out)Frequency response:3 Hz – 150kHzInput sensitivity (MC):100 / 330 / 600 µVInput impedance (MC):100 / 470 / 1000 ?Input sensitivity (MM):2.5 mVInput impedance (MM):47 k?Gain:50 dB (MM) / 62 – 78 dB (MC)RIAA accuracy:+/- 0.5 dB (20 Hz – 20 kHz)Power supply options:Q-PSU (standard) / Obelisk PX / Thesis PiDimensions (W x H x D):9.5 x 7.5 x 22 cm CONCLUSION from the Stereophile review: I spent many a night with Heed Audios Quasar and Q-PSU, engaged in all the revelry and vinyl music-making excitement they created with boundless enthusiasm and deep soul. Like Heeds Elixir, the Quasar is very well built, and its jacks easily withstood the endless tugs and twists this audio reviewer subjected them to. It exhibited pleasing tonality from LP to LP, resolving each disc with its own unique character and a broad soundstage with a grain-free treble, and plentiful midrange and bass extension. Id long heard about this rather plain-looking, spartan phono stage—how it could transform the sounds of lesser systems, and challenge bigger comers with more hi-fi cred and glossier nameplates. The Heed Quasar is a mighty mite of musical authority, a twin-turbo phono stage that offers plenty of flexibility, a practically bombproof enclosure, and ample musical meat and value for the dollar. My brother already wants to buy one. Radically recommended! SHIPPING: Free in the US and in the original boxes, including the extra pre to power supply cable HEED provides.

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Up for auction is my Heed Questar MC Phono Stage. This is an excellent sounding moving coil phono pre-amp that’s been used with my Thorens TD160 and Ortofon Rondo Red. These stages pack a punch! Seriously weighty bass and middle, amazing for dance, rock and many other genres. Bags of detail and a really stunning sounding phono-stage. Only selling due to an upgrade. Extremely good condition and beautifully made piece of kit. Any questions just ask NB: re-listed due to

Here is an opportunity to get into a real high-end phono preamp for budget money. I am selling my Heed Quasar phono preamp from my own personal collection. I have way too many phono preamps and I will be selling all but one. Thanks for looking and feel free to ask questions and/or advice. This is my hobby and I enjoy helping others when I can. The signal processing of cartridges is one of the most delicate jobs in amplification. All the more so because it isnt done merely by boosting a few hundred microvolts to a few hundred millivolts. In fact, at this thousandfold amplification (60 dB) the signal must be processed as cleanly and noise-free as possible. The extremely low signal level and the frequency-related amplification which arises from the RIAA equalisation curve applied in the cutting of LPs make the highest demands of the circuit topology and technical realisation of a phono preamplifier.The Quasar, with its discrete conception and wide range of features, represents a unique bargain at this price level. The Quasar is built in dual-mono configuration from the power supply upwards. There are two separate amplifier stages for MM and MC cartridges, both being fed from their own regulated power supply arrangement. Optimum adjustments to the cartridge in use can be applied for sensitivity and load by various settings of the jumpers on the PCB. The two separate outputs of the Quasar with different sensitivities make it possible for preamps or recorders to be fed via Low Out, whilst its High Out can drive power amps directly.The output stage has huge headroom at extremely low noise levels and, due to its low output impedance and high current delivery, can drive long interconnect cables without any sonic degradation. The enhanced power supply of the Quasar is based around a 60 VA toroidal transformer with low-density magnetic field and very little dispersion. This power, together with 40,000 mF filtering, can feed the circuit with the kind of super-clean current usually delivered only by battery-based supplies, even with extreme dynamic swings.The entirely discrete conception, as well as the short signal paths of the Quasar, combine the best audiophile tradition with innovative circuit design. This new phono preamplifier makes analogue high-end reproduction affordable at last! The Quasar was awarded first prize for Best Phonostage in 2002 at the biannual Image Hifi Awards in Germany, one of Europes premier hi-fi accolades.Specifications:MM input: 5 mV /47 kOhm / 100 pFMC input: adjustableSensitivity: 100 µV - 200 µV - 600 µVImpedance: 100 Ohm / 220 Ohm / 470 OhmOutput voltage: Low Out: 220 mV/100 OhmOutput voltage: High Out: 775 mV (0 dBm)/ 22 Ohm MSRP: $1299.99 Reviewed very highly in Stereophile https://www.stereophile.com/content/heed-audio-quasar-phono-preamplifier Please ask questions before purchasing

Up for auction is my Heed Questar MC Phono Stage. This is an excellent sounding moving coil phono pre-amp that’s been used with my Thorens TD160 and Ortofon Rondo Red. These stages pack a punch! Seriously weighty bass and middle, amazing for dance, rock etc (if your a smooth jazz fan then maybe not for you) Extremely good condition and beautifully made piece of kit. Any questions just ask

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Heed Questar MC + Q-PSU III, inkl. OVP und Zubehr, Zustand neuwertig ohne Mngel oder Defekten. Worldwide shipping, please contact me about Shipping Costs before purchasing. Value of shipping that You see is valid only for EU-Countries. Privatverkauf daher keine Garantie und Rcknahme meinerseits.

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier