Up for auction is a 6.5 foot long HARMONIC TECH Pro-AC11 CL-3 Single Crystal Copper power cable. This cable was removed from a working studio facility. It has the upgraded Hospital Grade connector. Good luck with the bidding! The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The original retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

HARMONIC TECHNOLOGY PRO 9 REFERENCE SPEAKER CABLES (BI-WIRE) - 5FT WITH HT SPADE CONNECTORS HARMONICS SPADE LUGS ARE MADE WITH SINGLE CRYSTAL TM (OCC) COPPER THIS IS A REFERENCE CABLE IN BOTH SOUND AND DESIGN. THESE CABLES ARE CONFIGURED IN SHOTGUN BI-WIRE WHICH USES 2 PRO 9s CABLES PER SPEAKER - THIS ALLOWS FOR HIGHER CURRENT HANDLING FOR LARGE SPEAKERS AND POWERFUL AMPS. GOOD CONDITION WITH MARKS FROM NORMAL USE / NO ISSUES THESE ARE STIFF CABLES

I am selling my pair of Harmonic Tech Pro9+ speaker cables. These cables live up to their reputation! Price when new was $2200. Feel free to reach out with any questions.

Up for auction is a 6.5 foot long HARMONIC TECH Pro-AC11 CL-3 Single Crystal Copper power cable. This cable was removed from a working studio facility. It has the upgraded Hospital Grade connector. Good luck with the bidding! The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The original retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Description Direct from Japan Please check the image carefully before purchasing. Please feel free to contact us if you have any question. Payment I accept credit cards Apple Pay Google Pay and PayPal. Shipping We will ship to world wide with tracking number. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: Import duties taxes and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Description Direct from Japan Please check the image carefully before purchasing. Please feel free to contact us if you have any question. Payment I accept credit cards Apple Pay Google Pay and PayPal. Shipping We will ship to world wide with tracking number. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: Import duties taxes and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Up for auction is a 6.5 foot long HARMONIC TECH Pro-AC11 CL-3 Single Crystal Copper power cable. This cable was removed from a working studio facility. It has the upgraded Hospital Grade connector. Good luck with the bidding! The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The original retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

DescriptionAuthenticity: 100% AUTHENTIC! If you have any question about the condition, accessories, or anything about the product,Please feel free to message us. We are glad to answer all your concerns. ShippingDHL, Fedex Fastshipping3-10 business days after shipment(Tracking number + Insurance.)PaymentPlease give me the payment within 3days from the date of bid.About UsWe sell our items on other websites and in our retail stores in Japan at the same time.If the item was sold out before your purchase, your order will be cancelled and a full refund will be issued immediately. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you.

DescriptionAuthenticity: 100% AUTHENTIC! If you have any question about the condition, accessories, or anything about the product,Please feel free to message us. We are glad to answer all your concerns. ShippingDHL, Fedex Fastshipping3-10 business days after shipment(Tracking number + Insurance.)PaymentPlease give me the payment within 3days from the date of bid.About UsWe sell our items on other websites and in our retail stores in Japan at the same time.If the item was sold out before your purchase, your order will be cancelled and a full refund will be issued immediately. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you.

Up for auction is a 6.5 foot long HARMONIC TECH Pro-AC11 CL-3 Single Crystal Copper power cable. This cable was removed from a working studio facility. It has the upgraded Hospital Grade connector. Good luck with the bidding! The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The original retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

VERY GOOD PREOWNED CONDITION. 1 M PAIR.

VERY GOOD PREOWNED CONDITION. 1 M PAIR.

A pair of Harmonic Tech 6N Crystal Copper Pro-9+ Bi-Wire Speaker Cables Quantity: 2EA Length: 8ft each ConditionSign for used but overall Great shape.it wiped clean and ready to use. If you have any further questions, please dont hesitate to contact me. Shipping: We do customized packaging. Whatever the shape or size of the items. It is heavy-duty packaging with three layers cardboard. So, The package will deliver safe and secure in your place. prefer fast shipping, You wont have to wait too long. Contact: We all make mistakes dont we?. Because we do not know what will happen, So, if youre not happy with items, Please, feel free contact to me. we will provide you with best solutions and Please give us a second chance to be happy again. Thank you, Seller Note : Please double check your shipping address & contact number before your purchase from our store. We will contact you shortly after your purchased and we will keep you updated. Please keep in touch with our store after purchased. Just in case, we have to contact you by ebay message or by phone. Most items will be shipped within 24 hours.

Up for auction is a 6.5 foot long HARMONIC TECH Pro-AC11 CL-3 Single Crystal Copper power cable. This cable was removed from a working studio facility. It has the upgraded Hospital Grade connector. Good luck with the bidding! The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The original retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a 6.5 foot long HARMONIC TECH Pro-AC11 CL-3 Single Crystal Copper power cable. This cable was removed from a working studio facility. It has the upgraded Hospital Grade connector. Good luck with the bidding! The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The original retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Harmonic Tech XLR -Kabel Truth link XLR ca1,1 m Lieferumfang:Harmonic Tech , Truth Link XLR-ca.1,1 m Stereo Technisch : Voll Funktionstüchtig Optisch : Gebracht mit Gebrauchsspuren siehe Bilder Versand :Wir Versenden mit DHL / Kein Auslandsversand nur innerhalb Deutschland. Kaufpreis :Der Verkaufspreis beinhaltet die gesetzl. Mehrwertsteuer, diese wird jedoch nach §25a UstG (Differenzbesteuerung) auf der Rechnung nicht gesondert ausgewiesen. !!! Original Bilder !!!

Accustic Arts Cd Drive 1 +Dac 1 -MK IV For sale is one used Accustic Arts CD Drive 1 + DAC 1 - MK IV in excellent condition. With remote control. Also included are the following associated cables: 1- Harmonic Tech - Digital platinum XLR cable 1- Acoustic Zen- Krakatoa power cable 1- Acoustic Zen unmarked power cable wich I was told was an early release of a tsunami power cable. * The DAC 1 - MK IV is a 66 Bit/ 1536khz converter. All cables and devices are exact as shown in great working condition Well cared for and lightly used Exact as shown

4 1/2 feet long good condition.