Harmonic Tech Pro-AC11 Power Cable Very nice condition. Light use. Factory terminated. Hospital grade - Hubbell Items Will Be Shipped Fully Insured! Please Check Out My Other Items! Included!Pro-AC11 power cable PayPal! Item To Be Paid Within 48 Hours After Sale!Confirmed Address Only!No PO Boxes!As Is!

Used,excellent condition

VERY GOOD CONDITION. PREOWNED.

Harmonic Technology PRO 11+6N SINGLE CRYSTAL COPPER SPEAKER CABLES 5 feet length, approximately 1.5 meters BananasFLAWLESS PERFECT

Selling my Harmonic Technology Harmonic Tech ProSilway MKIII+ XLR Audiophile Interconnects. They are 1 meter in length or about 40 inches. The ProSilway MKIII+ conductors used a proprietary mix of silver and copper. I have the Harmonic Tech Magic Link II and the ProSilway MKIII+ are so close sonically I couldnt reliably tell the difference The ProSilway MKIII+ were about half the price of the Magic Link II and are probably just as good or nearly as good The ProSilway MKIII+ is really the sweet spot in the Harmonic Tech lineup for value and performance Honestly for looks and sonics they are better and nicer than the new HT stuff. The ProSilway MKIII+ are hard to find too Unless you want to spend stupid money the HT ProSilway MKIII+ are about the best you are going to find. The Acoustic Zen Matrix Reference II is a well regarded interconnect and the ProSilway MKIII+ is much better. The Matrix Ref II sounded kinda gritty in comparison to the MKIII+, I think because the MKIII+ used silver it sounded smoother and cleaner. Anyways these are used, but are in pretty decent shape...I am super anal with all my gear...you wont be disappointed I cant sell them for any less as all the Ebay fees are expensive and the FREE shipping for me is expensive too I just wanted to add some stuff I can remember. The ProSilway MKI and MKII had the more plain tech flex black jacket with the single line spiralling around it. The ProSilway MKIII had the nicer all black sparkly jacket. The ProSilway MKIII also had twice the silver content in the conductors as the MKII. The MKIII+ had the same type of jacket as the Magic Link II, just a different color. I am not sure if they tweaked or improved the conductors on the ProSilway MKIII+. The ProSilway MKIII+ was the pinacle before being done away with for the newer cheaper HT lines. Even the Magic Link III was downgraded to kind of a cheap look...Magic Link II was better My pics dont do them justice, they are super nice looking and a darn good interconnect period.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Harmonic Tech Pro-Silway MkIII RCA Cables; 31” Pair. Condition is Used. Shipped with USPS Ground Advantage.

Experience high-quality sound with these Harmonic Technology Pro-9+ Crystal Copper Reference Speaker Cables (pair). With a length of 10 ft (3m), these cables are perfect for connecting your speakers to your amp. The spade connectors ensure a secure and reliable connection. Cables and spades are in great condition.

I recently purchased a large lot of super high quality stereo cables, all came from a audiophile. I believe the previous owner liked to experiment with different cables. Harmonic Technology FANTASY Speaker Cables, one pair (two cables) with 2 spade connectors on one termination, 4 spade connectors on opposite termination. Could probably be changed to other type of connector if someone had the skill / tools. Cables are 10 feet in length each. Cables are in excellent physical condition. Came from an audiophile estate, so obviously these were at least used (some scratches on the spades), then probably swapped for other cables. Previous owner was a cable hoarder for lack of a better term. Connectors are labeled Harmonic Technology Fantasy Speaker Cable - 11 AWG Single Crystal and look to be in superb condition. I did not test these cables so they are sold as-is, no returns or refunds. By bidding/buying, you agree to these terms. I have no stereo gear here that will accept such large-size cables. These things appear to be capable of jump-starting a Cat bulldozer. They are quite impressive in person. Im sure they would make any compatible system sound great. Cables include the original zippered carry case as shown. See my other auctions for other cables, Cardas, Audioquest, Harmonic Technology, Blue Jeans as well as many others.

Used,good condition

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

pair of harmonic technology magic link one cables plus 1 single digital one cable total 3.

DescriptionAuthenticity: 100% AUTHENTIC! If you have any question about the condition, accessories, or anything about the product,Please feel free to message us. We are glad to answer all your concerns. ShippingDHL, Fedex Fastshipping3-10 business days after shipment(Tracking number + Insurance.)PaymentPlease give me the payment within 3days from the date of bid.About UsWe sell our items on other websites and in our retail stores in Japan at the same time.If the item was sold out before your purchase, your order will be cancelled and a full refund will be issued immediately. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Herzlich willkommen bei Retro Audio, dem führenden Fachgeschäft für High Fidelity des vergangenen Jahrhunderts im Herzen Berlins. Wir führen eine feine Auswahl an klassischen Hifi-Komponenten, vom Tonbandgerät über den Röhrenverstärker bis hin zu Lautsprechern aller Art. Unser Know How reicht von den 60er Jahren bis weit in die 90er Jahre herein und wir beraten Sie gern in unseren Geschäftsräumen. Ebenfalls sind wir Ihr Ansprechpartner in sachen Restauration, Reparatur und Ankauf. Kommen Sie einfach mal vorbei und lassen Sie sich entführen in eine Ära, in der Qualität und Wirtschaftlichkeit noch kein Gegensatz war. Erleben Sie den Klang der Zeit bei Retro Audio in Berlin. SIE KÖNNEN UNS DIREKT PER EMAIL ODER TELEFONISCH ÜBER DIE HOTLINE KONTAKTIEREN, ALLE KONTAKT-DATEN FINDEN SIE UNTEN IM IMPRESSUM HARMONIC TECH PRESISION LINK RCA CABLE 150cm LEGENDE State of the Art sehr selten, technisch und optisch einwandfrei, mit leichten Gebrauchsspuren, top sound, den Zustand bitte den Fotos entnehmen. International bidders are welcome very rare, technically and optically flawless, top sound, with slight signs of use, please refer to the photos for the condition. Shipment the World: 35 Euro. Direkt vor dem Versand werden unsere HiFi-Komponenten wiederholt einer technischer Prüfung unterzogen, wodurch die Versandszeit etwas länger dauern kann. Diesbezüglich bitten wir Sie um Nachsicht. 12 Monaten Gewährleistung Danke für Ihren Kauf Die Zufriedenheit unserer Kunden ist für uns das wichtigste. Denn nur ein zufriedener Kunde gibt uns das Gefühl alles richtig gemacht zu haben. Trotz all unseres Engagements und sorgfältiger Vorbereitungen könnenwir leider nicht immer garantieren das alles glatt läuft. Deshalb bitte ich Sie aufrichtig: Sollten irgendwelche Probleme auftreten oder sollten Sie unzufrieden sein bitte kontaktieren Sie mich. Ich werde alles in meiner Macht stehende tun damit wir gemeinsam die Probleme beheben. SIE KÖNNEN UNS DIREKT PER EMAIL ODER TELEFONISCH ÜBER DIE HOTLINE KONTAKTIEREN, ALLE DATEN FINDEN SIE UNTEN IM IMPRESSUM Retro-Audio-Foto-Berlin

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

I recently purchased a large lot of super high quality stereo cables, I will be listing some today and more in the future. all came from a audiophile. I believe the previous owner liked to experiment with different cables. this auction is for a Harmonic Tech Digital Cable Cyberlink Silver. Cable is 42 inches long from end to end. Is terminated with an RCA-type connector on each end, but center pin is hollow. I am unable to test since I dont own any equipment that uses such a connector. White/clear outer jacket is intact but one section has a little discoloration. See my other auctions for other cables, Cardas, Audioquest as well as many others.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

1m Pair of harmonic truth link XLR connectors Used in good working order

Up for sale is an Auralic Altair Wireless Streaming DAC. Model: Altair Color: Silver Voltage: 115V, but can be easily converted to 230V Internal Storage: 2TB Factory Installed Physical Condition: 8/10 Except for a very small scratch on the side it is in perfect condition Functional Condition: The Altair was tested and fully functional. Tobacco/Pet Free: Yes Included are: Altair Remote 2x Antenna Harmonic Tech Pro-AC11 Power Cable Original box Description: Assembling all the components for a feature-rich, wireless digital streaming Hi-Fi audio system that sounds great can be a formidable and expensive undertaking. That’s why we built an outstanding DAC and gave it the ability to stream ultra-high-resolution digital music. The ALTAIR Wireless Streaming DAC connects to just about everything, all on its own. It’s a lot of technology in a single box that opens your system to the world. Specifications: Frequency Response: 20 - 20KHz, +/- 0.1dB* THD+N: <0.0003%, 20Hz-20KHz at 0dBFS Dynamic Range: 124dB, 20Hz-20KHz, A-weighted Lossless: AIFF, ALAC, APE, DIFF, DSF, FLAC, OGG, WAV and WV Lossy: AAC, MP3, MQA and WMA PCM: 44.1KHz to 384KHz in 32Bit*** DSD: DSD64(2.8224MHz), DSD128(5.6448MHz), DSD256(11.2896MHz)**** Control Software: AURALiC Lightning DS for iOS. AURALiC Lightning DS for web browser (device setting only). OpenHome compatible control software (BubbleUPnP, Kazoo). Roon (Roon Core required separately) Streaming Inputs: Network shared folder, USB Drive, Internal Music Storage**, uPnP/DLNA Media Server, native TIDAL and Qobuz Sublime+ streaming, Internet Radio, Spotify Connect, AirPlay, Bluetooth, Songcast, RoonReady Digital Inputs: 1*AES/EBU, 1*Coaxial, 1*Toslink, 1*USB device to computer Balanced Output: XLR (4Vrms at 0dBFS, output impedance 10ohm) Unbalanced Output: RCA (2Vrms at 0dBFS, output impedance 50ohm) Headphone Output: 6.35mm Headphone Jack (output impedance 5ohm) Wired: Gigabit Ethernet. Wireless: 802.11b/g/n/ac Tri-Band WiFi Power Consumption: Sleep: <10W. Playback: 35W at max. Dimensions: 13 x 9 x 2.6 in. (33cm x 23cm x 6.5cm) Weight: 7.0 lbs (3.2kg) Review: Home Theater Audio: “THE AURALIC ALTAIR is well worth its $1899 price tag: a technologically advanced dac and high-resolution dsd/dxd network streamer with excellent sound and build quality.” MSRP $2,298, I am asking $899.99 Shipping: Shipping inside the USA is $49.99. International Shipping is calculated exact by USPS. Shipping weight is 25 lbs and the box measures 20x13x5 International Shipping: When I ship International I am not responsible for any loss/damage during shipping and any Customs duties/fees/charges/taxes.