Selling my Harmonic Technology Harmonic Tech ProSilway MKIII+ XLR Audiophile Interconnects. They are 1 meter in length or about 40 inches. The ProSilway MKIII+ conductors used a proprietary mix of silver and copper. I have the Harmonic Tech Magic Link II and the ProSilway MKIII+ are so close sonically I couldnt reliably tell the difference The ProSilway MKIII+ were about half the price of the Magic Link II and are probably just as good or nearly as good The ProSilway MKIII+ is really the sweet spot in the Harmonic Tech lineup for value and performance Honestly for looks and sonics they are better and nicer than the new HT stuff. The ProSilway MKIII+ are hard to find too Unless you want to spend stupid money the HT ProSilway MKIII+ are about the best you are going to find. The Acoustic Zen Matrix Reference II is a well regarded interconnect and the ProSilway MKIII+ is much better. The Matrix Ref II sounded kinda gritty in comparison to the MKIII+, I think because the MKIII+ used silver it sounded smoother and cleaner. Anyways these are used, but are in pretty decent shape...I am super anal with all my gear...you wont be disappointed I cant sell them for any less as all the Ebay fees are expensive and the FREE shipping for me is expensive too I just wanted to add some stuff I can remember. The ProSilway MKI and MKII had the more plain tech flex black jacket with the single line spiralling around it. The ProSilway MKIII had the nicer all black sparkly jacket. The ProSilway MKIII also had twice the silver content in the conductors as the MKII. The MKIII+ had the same type of jacket as the Magic Link II, just a different color. I am not sure if they tweaked or improved the conductors on the ProSilway MKIII+. The ProSilway MKIII+ was the pinacle before being done away with for the newer cheaper HT lines. Even the Magic Link III was downgraded to kind of a cheap look...Magic Link II was better My pics dont do them justice, they are super nice looking and a darn good interconnect period.

Harmonic Tech Pro-Silway MkIII RCA Cables; 31” Pair. Condition is Used. Shipped with USPS Ground Advantage.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Excellent used condition, 10ft pair Harmonic technology MK3 XLR cable. Come with original packaging bag.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Harmonic Technology Pro-Silway ll in good conditionOn May-05-24 at 10:08:48 PDT, seller added the following information: US Shipping only

Item TitleHarmonic Tech Prosilway Mkiii Xlr Cable Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

Excellent used condition, 10ft pair Harmonic technology MK3 XLR cable. Come with original packaging bag.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.