Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The original retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

HARMONIC TECHNOLOGY PRO 9 REFERENCE SPEAKER CABLES (BI-WIRE) - 5FT WITH HT SPADE CONNECTORS HARMONICS SPADE LUGS ARE MADE WITH SINGLE CRYSTAL TM (OCC) COPPER THIS IS A REFERENCE CABLE IN BOTH SOUND AND DESIGN. THESE CABLES ARE CONFIGURED IN SHOTGUN BI-WIRE WHICH USES 2 PRO 9s CABLES PER SPEAKER - THIS ALLOWS FOR HIGHER CURRENT HANDLING FOR LARGE SPEAKERS AND POWERFUL AMPS. GOOD CONDITION WITH MARKS FROM NORMAL USE / NO ISSUES THESE ARE STIFF CABLES

I am selling my pair of Harmonic Tech Pro9+ speaker cables. These cables live up to their reputation! Price when new was $2200. Feel free to reach out with any questions.

Up for auction is a 6.5 foot long HARMONIC TECH Pro-AC11 CL-3 Single Crystal Copper power cable. This cable was removed from a working studio facility. It has the upgraded Hospital Grade connector. Good luck with the bidding! The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The original retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a 6.5 foot long HARMONIC TECH Pro-AC11 CL-3 Single Crystal Copper power cable. This cable was removed from a working studio facility. It has the upgraded Hospital Grade connector. Good luck with the bidding! The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The original retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a 6.5 foot long HARMONIC TECH Pro-AC11 CL-3 Single Crystal Copper power cable. This cable was removed from a working studio facility. It has the upgraded Hospital Grade connector. Good luck with the bidding! The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The original retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

VERY GOOD PREOWNED CONDITION. 1 M PAIR.

VERY GOOD PREOWNED CONDITION. 1 M PAIR.

A pair of Harmonic Tech 6N Crystal Copper Pro-9+ Bi-Wire Speaker Cables Quantity: 2EA Length: 8ft each ConditionSign for used but overall Great shape.it wiped clean and ready to use. If you have any further questions, please dont hesitate to contact me. Shipping: We do customized packaging. Whatever the shape or size of the items. It is heavy-duty packaging with three layers cardboard. So, The package will deliver safe and secure in your place. prefer fast shipping, You wont have to wait too long. Contact: We all make mistakes dont we?. Because we do not know what will happen, So, if youre not happy with items, Please, feel free contact to me. we will provide you with best solutions and Please give us a second chance to be happy again. Thank you, Seller Note : Please double check your shipping address & contact number before your purchase from our store. We will contact you shortly after your purchased and we will keep you updated. Please keep in touch with our store after purchased. Just in case, we have to contact you by ebay message or by phone. Most items will be shipped within 24 hours.

Up for auction is a 6.5 foot long HARMONIC TECH Pro-AC11 CL-3 Single Crystal Copper power cable. This cable was removed from a working studio facility. It has the upgraded Hospital Grade connector. Good luck with the bidding! The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The original retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a 6.5 foot long HARMONIC TECH Pro-AC11 CL-3 Single Crystal Copper power cable. This cable was removed from a working studio facility. It has the upgraded Hospital Grade connector. Good luck with the bidding! The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Up for auction is a pair of Harmonic Tech Pro-Silway II XLR cables. They are 16 feet long measured from the edge of each connector. Its 15 10 of cable to the start of each connector. These cables were pulled from a high end system and were tested as working 100%. I have borrowed this description from the Reference AudioVideo website. The conduction wire is a bi-metal hybrid, consisting of four filaments to optimize both bass and treble frequencies. Half of the filaments are designed for the midrange/treble signal and consist of two isolated strands of pure silver, cast to a purity level of 7N (99.99997%) and of course, is made with Single Crystal TM (OCC) technology. The remaining two filaments consist of Single Crystal copper and optimize the bass range, adding a fuller tone quality. The braided outer shield is pure silver plated on copper and was designed to isolate the delicate signal from RFI noise fields. A second defense noise barrier is provided in the form of an aluminum-coated Mylar shield situated closer to the conductors to ensure a very high signal-to-noise ratio. This Twin-Shield design will give you the ultimate in clarity and 3-D imaging with a velvety-black background silence due to elimination of electromagnetic interference, whether generated by RFI (radio frequency interference), digital noise, or A.C. generated hum. All insulation consists of either Teflon tape or air-foamed PE (polyethylene using the air bubbles as the main dielectric). Although very expensive to produce, air-foamed PE has the best dialectric constant of any generally available material Again, from their site. Technical Data: XLR/Balanced TerminationsCapacitance per foot = 19 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 OhmTechnical Data: RCA/Single Ended TerminationsCapacitance per foot = 32 pF Inductance per foot = 0.43 uH Resistance per foot = 0.011 Ohm The original retail price for these cables is/was $439 per meter, approx $2000 per cable, $4000 for the pair. The actual item is pictured in the post. I have done my best to accurately and faithfully describe this item. Therefore, please look carefully at all the pictures. Zoom in and out and review all photos. Please contact us if you have any questions about the item before purchasing. SHIPPING INFORMATION: This item goes out with FEDEX Ground, which means about 2-7 business days to reach you. Items get packed and shipped within 1 business day. All shipments are provided with tracking information. Some items may require signature confirmation. If the package arrives damaged (ripped, crushed, open box etc.), please take a picture of the package and do not accept it. Contact me and the refund process will begin. This item is only available for domestic U.S sale. No international sales.

Harmonic Technology Pro 9+ Hi-End LS Kabel 2.5m!. ????????? ??????: Gebraucht. ?????????: Sparversand aus dem Ausland.

Listing is for 2 HARMONICTECH 5 PRO-SILWAY AUDIO CABLES FREE SHIPPING! Feel free to contact me with any questions. Be sure to add me to your favorites list! Check out my other items! MY POLICY Due to the many changes with Ebay its now imperative to set expectations for the many complexities of an Ebay transaction. Some of the items I sell are obtained used, and in some instances, my personal stuff. I also consign items for others. If it is not in the picture it is not included unless otherwise noted. If you are not sure please ask. In some cases, defects can occasionally be overlooked, unknown, etc. Every effort will be made to correct any issues. Im not here to rip you off, get one over on you, or defraud you! I solely perform all the photos, listings, shipping, and customer support. All effort is made to be responsive and efficient in all transactions.

Up for sale is a pair of Harmonic Technology ProSilway MKII RCA interconnect cables for your preamplifier, power amplifier, CD player, or DAC. They are a 1.5m (5 feet) pair and in perfect condition.

Up for sale is a pair of Harmonic Technology ProSilway MKII XLR balanced interconnect cables for your preamplifier, power amplifier, CD player, or DAC. They are a pair over 4.0 meters (166 inches) long each and in perfect condition.

Harmonic Tech Pro-AC11 Power Cable Very nice condition. Light use. Factory terminated. Hospital grade - Hubbell Items Will Be Shipped Fully Insured! Please Check Out My Other Items! Included!Pro-AC11 power cable PayPal! Item To Be Paid Within 48 Hours After Sale!Confirmed Address Only!No PO Boxes!As Is!

VERY GOOD CONDITION. PREOWNED.

Harmonic Technology PRO 11+6N SINGLE CRYSTAL COPPER SPEAKER CABLES 5 feet length, approximately 1.5 meters BananasFLAWLESS PERFECT

Selling my Harmonic Technology Harmonic Tech ProSilway MKIII+ XLR Audiophile Interconnects. They are 1 meter in length or about 40 inches. The ProSilway MKIII+ conductors used a proprietary mix of silver and copper. I have the Harmonic Tech Magic Link II and the ProSilway MKIII+ are so close sonically I couldnt reliably tell the difference The ProSilway MKIII+ were about half the price of the Magic Link II and are probably just as good or nearly as good The ProSilway MKIII+ is really the sweet spot in the Harmonic Tech lineup for value and performance Honestly for looks and sonics they are better and nicer than the new HT stuff. The ProSilway MKIII+ are hard to find too Unless you want to spend stupid money the HT ProSilway MKIII+ are about the best you are going to find. The Acoustic Zen Matrix Reference II is a well regarded interconnect and the ProSilway MKIII+ is much better. The Matrix Ref II sounded kinda gritty in comparison to the MKIII+, I think because the MKIII+ used silver it sounded smoother and cleaner. Anyways these are used, but are in pretty decent shape...I am super anal with all my gear...you wont be disappointed I cant sell them for any less as all the Ebay fees are expensive and the FREE shipping for me is expensive too I just wanted to add some stuff I can remember. The ProSilway MKI and MKII had the more plain tech flex black jacket with the single line spiralling around it. The ProSilway MKIII had the nicer all black sparkly jacket. The ProSilway MKIII also had twice the silver content in the conductors as the MKII. The MKIII+ had the same type of jacket as the Magic Link II, just a different color. I am not sure if they tweaked or improved the conductors on the ProSilway MKIII+. The ProSilway MKIII+ was the pinacle before being done away with for the newer cheaper HT lines. Even the Magic Link III was downgraded to kind of a cheap look...Magic Link II was better My pics dont do them justice, they are super nice looking and a darn good interconnect period.