David Hafler DH-120 amp in good all-around condition. It has a few dings and the Hafler logo on the front isnt perfect, but no major dents or scratches. The book says it delivers 60 watts per channel, but a couple of technical sites Ive visited tested it consistently at 72 wpc. I use it for quite a while and it was always great. Im selling it because I move to some higher-end gear.

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

Hafler DH-120 60 Watt Stereo Power Amplifier - Works Great - Ships by UPS Ground

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

Unit in good condition with a few scratches on front and top, 60 watt into 8 ohms X 2 channels, 10 hz - 40 khz, 120 Vac.

I purchased this a while back and cleaned it up and repainted the face because it was scratched up. It works perfectly.

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

I purchased this a while back and cleaned it up and repainted the face because it was scratched up. It works perfectly.

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

I purchased this a while back and cleaned it up and repainted the face because it was scratched up. It works perfectly.

Unit in good condition with a few scratches on front and top, 60 watt into 8 ohms X 2 channels, 10 hz - 40 khz, 120 Vac.

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

I purchased this a while back and cleaned it up and repainted the face because it was scratched up. It works perfectly.

Unit in good condition with a few scratches on front and top, 60 watt into 8 ohms X 2 channels, 10 hz - 40 khz, 120 Vac.

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

I purchased this a while back and cleaned it up and repainted the face because it was scratched up. It works perfectly.

Unit in good condition with a few scratches on front and top, 60 watt into 8 ohms X 2 channels, 10 hz - 40 khz, 120 Vac.

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

Unit in good condition with a few scratches on front and top, 60 watt into 8 ohms X 2 channels, 10 hz - 40 khz, 120 Vac.

I purchased this a while back and cleaned it up and repainted the face because it was scratched up. It works perfectly.