The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

This Hafler DH-120 amplifier has been reworked and is fully functioning. It is a great addition to any home audio system. The brand of this amplifier is Hafler. The amplifier falls under the categories of Consumer Electronics, TV, Video & Home Audio, Home Audio, Receivers & Amplifiers, Amplifiers & Preamps. The amplifier is being sold as used. However, it has been reworked to ensure that it is functioning at its best. This Hafler DH-120 amplifier is a great addition to any home audio system.

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

This Hafler DH-120 amplifier has been reworked and is fully functioning. It is a great addition to any home audio system. The brand of this amplifier is Hafler. The amplifier falls under the categories of Consumer Electronics, TV, Video & Home Audio, Home Audio, Receivers & Amplifiers, Amplifiers & Preamps. The amplifier is being sold as used. However, it has been reworked to ensure that it is functioning at its best. This Hafler DH-120 amplifier is a great addition to any home audio system.

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

HAFLER DH-120 POWER AMP CLEAN TESTED. Unit is in good condition Has surface scratches See pictures Model Dh-120 Power cord in good condition Unit works perfectly No operating issues at all Fast 1 day handling time

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985

Hafler decals Hafler in white numbers in white or red you choose when you buy just specify the amp model number(s) and the color of the numbers they will include a Dh or an XL

The Hafler DH-120 is a very high quality 60 watts-per-channel MOSFET class AB stereo power amplifier. MOSFETs are solid-state devices that work on principals more similar to vacuum tubes than bipolar transistors — and it sounds great! This 30-year-old sample easily put out 77 WPC continuous and 118 W burst power into 8?.ts a traditional class AB linear power amplifier in a sheet metal steel case. It has four power MOSFETs (2 per channel) in TO-3 packages mounted to two big, anodized aluminum heat sinks on opposite sides of the case. This also comes with 19 Standard rack mount plate.SpecificationsPower output: 60 watts per channel into 8? (stereo)Frequency response: 10Hz to 40kHzTotal harmonic distortion: 0.006%Damping factor: 50Input sensitivity: 1.1VSignal to noise ratio: 100dBSemiconductors: 22 x transistors, 4 x MOSfet, 23 x diodes, 8 x Zener diodes, 1 x diode bridgeDimensions: 3.75 x 15.75 x 9 inchesWeight: 18lbsYear: 1985