Shipping: All items will be packed safely in a sturdy package for safe shipping. We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. From a GARRARD LAB 80 Transcription TURNTABLE - this will also fit the LAB 80 MKII FIRST PICTURE SHOWS THE COUNTERWEIGHT MOUNTED. Plated Steel? with satin finish. back turns to screw into the tonearm 1 3/4 x 1 1/8 diameter CONDITION: Like new, works perfectly, no stains, corrosion dents or scratches. I am selling parts from a Garrard Lab 80 turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping. We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. From a GARRARD LAB 80 Transcription TURNTABLE this part can be used on the Original (Mk I) Lab 80 and the Lab 80 Mk II Cueing Lever w the push back Spring. The spring sits in the outer plastic housing, without the spring, the cueing lever will not go back to neutral position. Complete cueing level, spring, washer and C clip for the linkage, roller and pivot axle 3.5 long, ov which 2.25 are above the chassis, lever is 1/2 wide, 1/4 deep on top, solid cast, polished aluminum Condition: LIKE NEW undamaged with glossy surface, no scratches, cracks or dents All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping. We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. BRAND NEW - MADE TO ORIGINAL Garrard Specifications GARRARD USES A LOOSE BALL BEARING VERTICAL PIVOT ON MANY OF THE BETTER OLDER MODELS SUCH AS THE---TYPE A, A-70, SL-72, SL-75, LAB-80, RC88, 88MkII, 98, 121, 210 & OTHERS MODELS IF YOU DONT KNOW THEY ARE THERE and LOOSEN THE PIVOT SHAFT LOCK SCREW--THEY SPILL OUT ALL OVER. THERE ARE 15 or 16 in the bearing race BUT THEY ARE VERY SMALL & EASY TO LOOSE SO WE ARE GIVING YOU 20. IT IS GARRARD PART # 43204 1 Package of 20 Bearing balls for Garrard Tonearm Vertical Pivot Bearing - Brand New Unused. I am selling parts from a Garrard Lab 80 turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. From a GARRARD LAB 80 MKII Transcription TURNTABLE this part can may used on the Original (Mk I) Lab 80, though the lower side of the lever is slightly tapered on the MKI, I have a complete LAB MKI assembly with the casting available in my other listings, pls check the link below FOR SALE IS 1x CONTROL LEVER from the LAB 80 MKII including washer and C Clip, up to 4 Levers available, if you buy all 4, Ill include the 3.5 connection rod. IF you want to buy multiple levers, pls contact me before you buy. so that I can adjust shipping. 1x Control Lever only - as shown in Pictures 2 to 5 FIRST PICTURE IS FOR ILLUSTRATION - Pictures 6&7 show the set of 4 I am selling parts from a Garrard Lab 80 turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts Solid polished metal (aluminum) 2 long, 3/8 wide, upper part 1 1/8 high Condition: EXCELLENT , high gloss polished aluminum, tested work perfectly without any wiggle or sloppinessSome faintest scuffing of polish can be removed with a little metal polish All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from Garrard Type A turntable. Pls check the link below for more parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts This idler wheel for REPAIR/ RE-TYRING: shiny and flexible rubber, but rim has several flat spots, where the turntable was left in On position for a long time, Runs noisy and bumpy Comes from a Type A, used in most RC models from RC88 98 120 Type A to LAB 80Metal plating is shiny, bushing is tight and runs freely. Idler drive wheel for Garrard record changers. Replacement Comments:Replaces Garrard part 53883 used in Type A, Type A Mk II, A70, A70 Mk II, Lab80, Lab80 Mk II, RC88, RC88 Mk II, RC88/3, RC88/4, RC98, RC98/3, RC98/4, RC120, RC121, RC121/3, RC121/4, RC121/11, RC210, T11, TA Mk11, 4SP.Specifications:OD (inches): 2.250ID (inches): 0.170Height (inches): 0.550Thickness (inches): 0.105 I am selling parts from Garrard Type A turntable. Pls check the link below for more parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. 3x MOTOR MOUNT WASHERS & CLIPS from GARRARD A70 Transcription TURNTABLE Will also fit a GARRARD TYPE A and RC88 MK II MOTOR SHOWN IN FIRST PICTURE IS FOR ILLUSTRATION ONLY Washer: .55 diameter, hole about .225. Clips fits into the .175 wide groove of the motor mounting post. CONDITION: Like new, no scratches, faint tarnish spots on some of the washers on one side only, clips are nice blackened spring steel I am selling parts from a Garrard Type A turntable. Pls check the link below for more parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. From a GARRARD LAB 80 Transcription TURNTABLE this part can be used on the Garrard A70, the Original (Mk I) Lab 80 and the Lab 80 Mk IILAST PICTURE SHOWS A SHURE CARTRIDGE MOUNTED WITH THE LONG SCREWS. CARTRIDGE IS NOT INCLUDED I am selling parts from a Garrard Lab 80 turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts THE TONEARM SHOWN IN THE FIRST PICTURE IS FOR ILLUSTRATION ONLY. For sale is HEADSHELL ONLY Original Headshell aluminum cast black high gloss finish, w orig 4 leads and clips Comes with 1/2 long mounting screws and 2mm spacers which are necessary on some cartridges (e.g. Shure) These screws are long enough to securely mount cartridges with deep holes, certain Shure and other cartridges which require longer screws. Condition: LIKE NEW undamaged working great, faint rubbing on the left hand side top edge barely noticeable. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I have a variety of Turntable and Audio connectors, sockets and plugs, pls check my other listingsClick here for more AMP LOK and MOLEX Turntable ConnectorsGarrard Chassis Power Socket - Amplock ConnectorFrom a GARRARD LAB 80 MK I TURNTABLE, this is a standard part that can be used on all later Garrards with the plug in Amplock connector, as well as most Dual BSR, Voice of Music etc Turntables from the 1970s and 80s.AMPLOCK CONNECTOR to the chassis plug complete with isolation sheet and mounting screw.Connector has all 4 pins wired: Black: To motorRed: To switch - this pin is used, when the turntable switches an external ampBrown: : To switchGreen: GroundWires are 1 or longer, The green ground wire loops on the mounting screw, where it connects to the motor ground.Includes insulation plate and mounting screw First Picture shows plugs and wires on the Garrard . This is for ILLUSTRATION ONLY. NOT INCLUDED Condition: Close to NEW, no scratches, cracks or corrosion All items will be safely packed to avoid any damage and promptly shipped. Click here for more Garrard Turntables and Parts Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. Vintage ORTOFON ESL HEADSHELL used on the ESL-1000 Tone ArmHeadshell has issues: Original Grip is missing, headshell got some heat exposure, probably from a soldering iron: bottom edge a bit ragged, the plastic body has slightly sagged, as seen from the front, the left side should is perhaps 1mm lower than the right side. Not sure how this affects the mounting posts, but could possibly be compensated with a spacer.Of the 4 connecting pins, 2 have sunk into the plastic, Condition: Black plastic body with the ESL cover plate taped to the top. 4 leads w original clip Original distance posts but no screws Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. Click here for more Garrard Turntables and PartsUltra Rare BROWN Plastic GARRARD Four Pin HEADSHELL Part No MPM5 used only on the Garrard RC88 MKII Turntable (which is basically a Type A in brown paint) This is a perfect example with a black grip and brown plastic body. Also has the embossed silver Garrard shield to cover the hole on top.Comes with an original Electrovoice flip over crystal cartridge Garrards Description The Garrard Type MPM5 Multi-Purpose pickup case has been designed for use on the Garrard Model RC210 and Type A automatic record changer. This pickup case will, with the aid of the accessories supplied with it. enable a wide range of pickup cartridges to be fitted. A thin bakelite section known as a knockout, which can be easily broken away, is provided in the front of the case through which can pass the knob of turnover type cartridges and a hole is located in the top of the case, covered by the Garrard name plate, for the knob of the turn round stylus type of cartridge. As this pickup case can easily be plugged in and out of the pickup arm, single stylus cartridges can be fitted having a separate case for each type of cartridge. Brown plastic with a red plastic handle. Silver embossed cover plate on top, and comes two two cartridge mounting screws. Pins and cartridge clips silver plated. Two leads are soldered to the cartridge, the other two leads are present with the orig Garrard clips Headshell in New condition: Plastic is clean and glossy. No chips cracks or other problems. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Garrard SP25 MKII Turntable Idler Wheel For Garrard & other turntables With Correct Original 2 Washers & 1 clip Maximum width / diameter 2 inches In Excellent used condition the rubber is supple with no flat spots **Careful packing**

Garrard SP25 MKII Turntable Idler Wheel For Garrard & other turntables With Correct Original 2 Washers & 1 clip In Excellent used condition the rubber is supple with no flat spots **Careful packing**

Item works. One knob is missing on the front right. Apart from that condition is good.

Garrard SP25 MKII Turntable Idler Wheel For Garrard & other turntables With Correct Original 2 Washers & 1 clip In Excellent used condition the rubber is supple with no flat spots **FREE GB POSTAGE** **Careful packing**

Vintage Turntable Deck GARRARD SP25 MKII (FOR PARTS). MADE IN USSR Having a clear out of old vintage turntable partsTHIS HAS BEEN ROBBED OF ITS MOTOR / TRANSRMER Have not tried transformer / motor so unable to say if these work Collection welcome or will post

This Listing is For: A Vintage The Dulcet System, Vintage Garrard RC121 Mkii Tubes Stereo Record Player cabinetNeeds Service For Parts or Repairs I turned the unit on and waited for 15 minutes but nothing happened, I looked inside to see if something was burned out but I did not see anything, I just spent 10 minutes total and I dont have any time to fix it. It comes with a manual.I looked around on the internet for awhile but did not find anything about The Dulcet System Please look at the pictures carefully to get an accurate description of condition and feel free to ask questions. *** Fast Shipping Within The Continental United States*** *Buyers in Hawaii, Alaska, Puerto Rico, Guam, Virgin Island*Please contact me for shipping rates before purchasing *** I ship with UPS/USPS Priority or FedEx ***Depending on your location & at my discretion. Most shipments are sent out within 1 business day after payment is confirmed. Please note that most of my vintage items are likely to show normal signs of use and wear commensurate with age, which may include patina, scratching, small chipping, crazing, paint or finish fade, enamel loss, oxidation, and wear. Please contact me with any issues prior to leaving negative/neutral Feedback or low detail ratings, as I will always do my best to solve any problems that may come up! Payment:All buy it now items require immediate payment.

Vintage Garrard M6/M7 headshell. No cracks. Original leads. Ships quickly. Pro-packed. Please contact me directly with any questions or concerns.

Garrard 70 MKII Transcription Laboratory Turntable, Tonearm & cartridge Will need a service before use, in good condition for age. This item will be well packed for UK delivery. Please do not hesitate to ask any questions. Thank you

Pces Spare Turntable Garrard SP 25 MkIII : Wheel To CamshaftThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Automatic cam wheel for GARRARD vinyl turntable, Type SP 25MkIII.Metal part in good condition, degreased.For replacement or DIY project.Careful packaging.Automatic cam wheel for GARRARD vinyl turntable, Type SP 25MkIII. Metal part in good condition, degreased. For replacement or DIY project. Careful packaging. EAN Non applicable Marque compatible DIY Modèle SP 25 MkIII Marque Garrard Numéro de pièce fabricant 00000000 Numéro de pièce fabricant C58329 Type Roue à cames

Al Pezzo Ricambio Giradischi Garrard SP 25 MkIII : Ruota Con CammeLa descrizione di questo articolo è stata tradotta automaticamente. Se hai dubbi o domande, ti invitiamo a contattarci.Ruota a camma automatica per giradischi in vinile GARRARD, Tipo SP 25MkIII.Parte metallica in buone condizioni, sgrassata.Per sostituzione o progetto fai da te.Imballaggio accurato.Ruota a camma automatica per giradischi in vinile GARRARD, Tipo SP 25MkIII. Parte metallica in buone condizioni, sgrassata. Per sostituzione o progetto fai da te. Imballaggio accurato. EAN Non applicable Marque compatible DIY Modèle SP 25 MkIII Marque Garrard Numéro de pièce fabricant 00000000 Numéro de pièce fabricant C58329 Type Roue à cames

Vintage 1960s Garrard SP25 MKII (2) 4 Speed Turntable Record Deck Shure Cart. Has been in storage for quite a while. The turntable is in a custom made box, the plastic lid has no cracks. The turntable is in good condition. It needs a new plug and the wiring has been joined. There is a dust bug also included

Vintage Garrard Automatic Record Changers Operating Instructions RC.120/121 mkII.

Used condition and as seen in the pics. The plastic lid is in cracked It seems to be in working order but has been in a loft for some years. It is offered for sale as seen and for spares or repairs.Please feel free to ask any questionsMy contact number can be found from the business seller info at the bottom of the listing.You are welcome to collect any of our items from The Vintage Barn Henley-In-Arden B95 5NYYou may collect on a Friday or Saturday between 10am and 4pmTerms & Conditions of sale:We use a variety of different delivery methods which include Parcelforce, Myhermes and Royal Mail depending on the size and weight of your item or your location. We ALWAYS aim to post your items within 2 working days of your cleared payment so they are usually with you pretty quickly. If you have not received your item within a fair time please contact us and we will look into it for you. Please remember that if your item is delayed or not delivered we will look into it and resolve the issue for you but we can only do this if you let us know it has not been received.55

Garrard SP25 MKII Turntable Idler Wheel For Garrard & other turntables With Correct Original 2 Washers & 1 clip In Excellent used condition the rubber is supple with no flat spots **FREE GB POSTAGE** **Careful packing**