Normal 0 false false false EN-US X-NONE X-NONE NU FORCE ICON INTEGRATED DESKTOP AUDIO AMPLIFIER - WITH A USB DAC INPUT LOOKS TO BE NEW TESTED & WORKING CORRECTLY IN ALL MODES AND JACKS TESTED:RCA INPUTSUSB INPUT FROM A COMPUTER, PLUGGED INTO A WINDOWS COMPUTER, RECOGNIZED IMMEDIATELY IN WINDOWS DEVICE MANAGER AS USB DAC AND PRODUCING SOUND CORRECTLY, SEE LAST PICTURE FOR DEVICE MANAGER HEADPHONE JACK3.5MM REAR INPUT JACKLINE OUT JACK ON REARRJ-45 SPEAKER JACKS INCLUDES:ICON MINI DESKTOP AMPLIFIER, SPEAKER CABLES WITH GOLD MALE BANANA PLUGS, ORIGINAL AC ADAPTER, POWER CORD, USB CORD, SILICONE STAND, MANUAL, 4 STICK ON RUBBER PADS (FOR HORIZONTAL USE) Product highlights: 18 watts x 2 channels into 8 ohms at 1% THD+N24 watts x 2 channels into 4 ohms at 1% THD+Nbuilt-in 96kHz/24-bit USB DAChigh-performance headphone amplifier3.5mm stereo minijack audio input1 pair RCA analog audio inputsstereo minijack audio outputsilicone standRJ-45 speaker connectors (speaker wire included)AC adapter handles worldwide voltages (60W, 100-240VAC)1-1/4W x 6H x 4-1/2Dweight: 1 lb. FeaturesOverview: The icon is a desktop amplifier with a headphone amp and digital to analog converter built in. There are three inputs, USB (digital), stereo RCA, and stereo mini-jack, along with a mini-jack line output and a 3.5mm headphone jack. USB Input: The USB input is designed to connect to your computers USB port, allowing the icon to act as the sound card and amplifier. The input is a USB Type-B port and a USB Type-A to USB Type-B cable is included. Analog Inputs: There are two analog inputs, stereo RCAs and a 3.5mm stereo mini-jack, both on the rear panel. Speaker Outputs: The amplified outputs are RJ-45 terminals and speaker wire is included with the amp (with an RJ-45 connector on one end and two single banana plugs on the other). When using the NuForce S-X speakers, the wire included with the speakers should be used, which has RJ-45 connectors on both ends. Controls: Power: rotary power/volume control on the front panel; controls the volume for both the speaker level and front panel headphone outputs; turn fully counterclockwise to turn the unit offInput: rotary input selector switch; three position, mini-jack, RCA, and USB Connections: Front: 1/8 headphone; stereo; compatible with headphones up to 32 ohms; 31.25 mW x 2 @ 32 ohms; 80 mW x 2 @ 16 ohms; THD+N 0.05%; 20 Hz-20 kHzRear:Power: DC input for use with included power supplyInput 1: stereo mini-jack (3.5mm)Input 2: stereo RCAs; maximum 2.0 voltsInput 3: USB Type-B input; compatible with USB 1.1 and 2.0 (full speed and high speed); USB cable included; 96 kHz maximum sampling rate; 24 bit resolutionSpeaker Output: left and right RJ-45 terminals; muted when headphones are plugged inLine Output: stereo mini-jack; use the icon2 as a preamp or add a powered subwoofer SHIPPING TO A REAL STREET ADDRESS ONLY, NO PO BOXES NO SHIPPING TO ALASKA, HAWAII, P.R

I enjoyed this, works great! Purchased a DAC with optical, no longer need. Original owner.

As seen in the photos, item is in very good condition. Tested and works perfectly. Continental United States only for shipping. No Alaska, Hawaii or Puerto Rico.

Normal 0 false false false EN-US X-NONE X-NONE NU FORCE ICON INTEGRATED DESKTOP AUDIO AMPLIFIER - WITH A USB DAC INPUT LOOKS TO BE NEW TESTED & WORKING CORRECTLY IN ALL MODES AND JACKS TESTED:RCA INPUTSUSB INPUT FROM A COMPUTER, PLUGGED INTO A WINDOWS COMPUTER, RECOGNIZED IMMEDIATELY IN WINDOWS DEVICE MANAGER AS USB DAC AND PRODUCING SOUND CORRECTLY, SEE LAST PICTURE FOR DEVICE MANAGER HEADPHONE JACK3.5MM REAR INPUT JACKLINE OUT JACK ON REARRJ-45 SPEAKER JACKS INCLUDES:ICON MINI DESKTOP AMPLIFIER, SPEAKER CABLES WITH GOLD MALE BANANA PLUGS, ORIGINAL AC ADAPTER, POWER CORD, USB CORD, SILICONE STAND, MANUAL, 4 STICK ON RUBBER PADS (FOR HORIZONTAL USE) Product highlights: 18 watts x 2 channels into 8 ohms at 1% THD+N24 watts x 2 channels into 4 ohms at 1% THD+Nbuilt-in 96kHz/24-bit USB DAChigh-performance headphone amplifier3.5mm stereo minijack audio input1 pair RCA analog audio inputsstereo minijack audio outputsilicone standRJ-45 speaker connectors (speaker wire included)AC adapter handles worldwide voltages (60W, 100-240VAC)1-1/4W x 6H x 4-1/2Dweight: 1 lb. FeaturesOverview: The icon is a desktop amplifier with a headphone amp and digital to analog converter built in. There are three inputs, USB (digital), stereo RCA, and stereo mini-jack, along with a mini-jack line output and a 3.5mm headphone jack. USB Input: The USB input is designed to connect to your computers USB port, allowing the icon to act as the sound card and amplifier. The input is a USB Type-B port and a USB Type-A to USB Type-B cable is included. Analog Inputs: There are two analog inputs, stereo RCAs and a 3.5mm stereo mini-jack, both on the rear panel. Speaker Outputs: The amplified outputs are RJ-45 terminals and speaker wire is included with the amp (with an RJ-45 connector on one end and two single banana plugs on the other). When using the NuForce S-X speakers, the wire included with the speakers should be used, which has RJ-45 connectors on both ends. Controls: Power: rotary power/volume control on the front panel; controls the volume for both the speaker level and front panel headphone outputs; turn fully counterclockwise to turn the unit offInput: rotary input selector switch; three position, mini-jack, RCA, and USB Connections: Front: 1/8 headphone; stereo; compatible with headphones up to 32 ohms; 31.25 mW x 2 @ 32 ohms; 80 mW x 2 @ 16 ohms; THD+N 0.05%; 20 Hz-20 kHzRear:Power: DC input for use with included power supplyInput 1: stereo mini-jack (3.5mm)Input 2: stereo RCAs; maximum 2.0 voltsInput 3: USB Type-B input; compatible with USB 1.1 and 2.0 (full speed and high speed); USB cable included; 96 kHz maximum sampling rate; 24 bit resolutionSpeaker Output: left and right RJ-45 terminals; muted when headphones are plugged inLine Output: stereo mini-jack; use the icon2 as a preamp or add a powered subwoofer SHIPPING TO A REAL STREET ADDRESS ONLY, NO PO BOXES NO SHIPPING TO ALASKA, HAWAII, P.R

Product Description NuForce Icon iDo DAC In simple terms, the iDo is an Apple-compatible, 24-bit, USB Host Mode DAC (maximum resolution, 48kHz/24-bit), coupled with a simple but very high-quality desktop headphone amplifier. Two unexpected but welcome detail touches are that A) the iDo is compatible with—yet does not require—Apple’s option remote control, and B) the iDo DAC section not only provides the expected stereo analog audio outputs but also provides a coaxial S/PDIF digital output. The upshot of this latter feature is that, while the iDo can of course serve as a perfectly satisfying DAC/amp in its own right, it can also be used as a “bridge product” that can pass jitter-reduced digital audio signals from an Apple device on through to a much higher-end DAC, if desired.At the end of the day, though, the real reason to look into how much music from an Apple device can sound when you bypass Apple’s low-cost digital and analog audio circuits altogether, and let a much higher performance outboard DAC and amp handle the job. Readers will rightly ask if going to an outboard DAC/amp really makes all that big a difference (if, indeed, it makes any difference at all). The simple truth, as you’ll learn in this review, the iDo not only makes an audible difference; it makes a hugely audible difference that—once experienced—is pretty hard to resist.OVERVIEWConsider this DAC/headphone amp if:•You want an affordable, sonically compelling USB Host Mode DAC that is geared specifically for use with a wide range of Apple devices.•You’d like an Apple-compatible DAC that not only has analog outputs, but also provides an S/PDIF digital output.•You also want an affordable headphone amp that works with a broad range of headphones and earphones.•You want to see just how much better the audio data stored on your Apple device can sound when you bypass Apple’s low-cost electronics and let a high quality DAC/amp shoulder the workload (trust us on this one; the difference is pretty darned shocking).Look elsewhere if:•You were hoping for a highly versatile multi-input DAC; this one provides a USB input specifically for use with iPods/iPhones, and iPads (i.e., it’s not a general purpose USB input).•You were hoping for a DAC with support for high-res 96/24 or 192/24 digital audio files; this one supports a maximum data rate of 48kHz at 24-bit resolution. Whats Included NUForce Icon iDO Headphone / Low Level Audio DAC Condition Used - These are in excellent condition. I dont even remember using them, as they were in with my other IEMs and I just found them. This tells me they have very little usage. Anyway, theyre in excellent condition. Comes with Westone case, a couple sets of unused tips, cleaning tool and non-OEM MMCX 3.5mm cable. Shipping & Handling All products will be securely wrapped in the condition noted above and shipped via UPS, with insurance. Tracking will be provided upon shipment. I only ship to verified addresses on file with eBay within the United States only. Any purchases over $499 require an adult signature for insurance purposes. Handling may take up to 48 hours, but in most cases, ships within 24 hours. Please understand that UPS may take up to 24 hours for their site to update with tracking status - AFTER the package has been dropped off to their facility. The tracking number posted on the order page in eBay is the correct tracking information. Refund Policy Please read the description carefully. If you require more information, photos, etc. please dont hesitate to ask. All sales are final and I do not accept returns or offer refunds. Damage to products will be handled with UPS. I buy and sell things on eBay for a hobby. PLEASE read my feedback. It says a lot about the people youre doing business with online. Im proud of mine, and I hope you can have confidence in knowing you will be receiving exactly what is being described. My Promise to YOU I promise to be as truthful, descriptive and understanding of all issues and concerns related to your purchase. I want each transaction to go as smooth as possible. I trust you do too! *** THANK YOU for helping me make eBay a great place to buy and sell goods ***

This NuForce package includes a pair of NuForce S-1 desktop speakers AND the NuForce ICON, an integrated desktop audio amplifier.    S-1 desktops speakers are designed to coordinate with the ICON. Items are in excellent working condition, However there is a nick on the top corner of one of the speakers (please see photo). Items will ship in their original packaging.  The speakers will arrive in 1 box and the ICON in a separate box. S-1 Desktop Speakers Speaker specifications: 1)    3.5” Titanium full-range driver 2)    Neodymium magnet 3)    Impedance: 8 Ohm 4)    Sensitivity: 87dB 1W/1m 5)    Frequency Response: 80 Hz to 20 kHz 6)    Maximum power input: 30W 7)    Dimension: 9.5” x 6” x 4.75” 8)    Weight: 5.5 lb each 9)    Product Number: 895029002193 10)   Part Number: NF-S1-SIL-BLUE 11)  Serial No: S1-0200011 12)  Includes a pair of 1 meter speaker cables (RJ45 to RJ45)    ICON The following are included with the ICON: 1)    AC adapter 2)   USB cable – this is an upgraded NuForce gold plated USB cable (see photos) 3)    A pair of 1 meter speaker cables (RJ45 to banana) 4)    AC power cord Note:  The vertical plastic stand that was part of the original ICON package is not included. ICON specifications: 1)    Inputs:     a.      3.5mm Stereo     b.      RCA     c.      USB 2)   Headphone Output:     a.      Maximum output @32 ohm Load: 31.25mW     b.      THD (20Hz – 20KHz) : <0.03%     c.      Frequency Response (20 Hz – 20kHz) < -1dB 3)    Line Out (for Subwoofer) connection 4)    USB DAC 5)    Power = 12WX2 6)    THD+N=0.05%, 1kHz, 2W @ 40ohm load. THD+N=0.06%,1kHz, 2W @ 8ohm load 7)     SNR = 84 db at 7W @ 8ohm 8)     Power Adapter: 12-14V, 25W, 100-240VAC worldwide voltages 9)     Dimension: 6” x 4 ½” x 1” 10)  Weight: 1lb

Normal 0 false false false EN-US X-NONE X-NONE NU FORCE ICON INTEGRATED DESKTOP AUDIO AMPLIFIER - WITH A USB DAC INPUT LOOKS TO BE NEW TESTED & WORKING CORRECTLY IN ALL MODES AND JACKS TESTED:RCA INPUTSUSB INPUT FROM A COMPUTER, PLUGGED INTO A WINDOWS COMPUTER, RECOGNIZED IMMEDIATELY IN WINDOWS DEVICE MANAGER AS USB DAC AND PRODUCING SOUND CORRECTLY, SEE LAST PICTURE FOR DEVICE MANAGER HEADPHONE JACK3.5MM REAR INPUT JACKLINE OUT JACK ON REARRJ-45 SPEAKER JACKS INCLUDES:ICON MINI DESKTOP AMPLIFIER, SPEAKER CABLES WITH GOLD MALE BANANA PLUGS, ORIGINAL AC ADAPTER, POWER CORD, USB CORD, SILICONE STAND, MANUAL, 4 STICK ON RUBBER PADS (FOR HORIZONTAL USE) Product highlights: 18 watts x 2 channels into 8 ohms at 1% THD+N24 watts x 2 channels into 4 ohms at 1% THD+Nbuilt-in 96kHz/24-bit USB DAChigh-performance headphone amplifier3.5mm stereo minijack audio input1 pair RCA analog audio inputsstereo minijack audio outputsilicone standRJ-45 speaker connectors (speaker wire included)AC adapter handles worldwide voltages (60W, 100-240VAC)1-1/4W x 6H x 4-1/2Dweight: 1 lb. FeaturesOverview: The icon is a desktop amplifier with a headphone amp and digital to analog converter built in. There are three inputs, USB (digital), stereo RCA, and stereo mini-jack, along with a mini-jack line output and a 3.5mm headphone jack. USB Input: The USB input is designed to connect to your computers USB port, allowing the icon to act as the sound card and amplifier. The input is a USB Type-B port and a USB Type-A to USB Type-B cable is included. Analog Inputs: There are two analog inputs, stereo RCAs and a 3.5mm stereo mini-jack, both on the rear panel. Speaker Outputs: The amplified outputs are RJ-45 terminals and speaker wire is included with the amp (with an RJ-45 connector on one end and two single banana plugs on the other). When using the NuForce S-X speakers, the wire included with the speakers should be used, which has RJ-45 connectors on both ends. Controls: Power: rotary power/volume control on the front panel; controls the volume for both the speaker level and front panel headphone outputs; turn fully counterclockwise to turn the unit offInput: rotary input selector switch; three position, mini-jack, RCA, and USB Connections: Front: 1/8 headphone; stereo; compatible with headphones up to 32 ohms; 31.25 mW x 2 @ 32 ohms; 80 mW x 2 @ 16 ohms; THD+N 0.05%; 20 Hz-20 kHzRear:Power: DC input for use with included power supplyInput 1: stereo mini-jack (3.5mm)Input 2: stereo RCAs; maximum 2.0 voltsInput 3: USB Type-B input; compatible with USB 1.1 and 2.0 (full speed and high speed); USB cable included; 96 kHz maximum sampling rate; 24 bit resolutionSpeaker Output: left and right RJ-45 terminals; muted when headphones are plugged inLine Output: stereo mini-jack; use the icon2 as a preamp or add a powered subwoofer SHIPPING TO A REAL STREET ADDRESS ONLY, NO PO BOXES NO SHIPPING TO ALASKA, HAWAII, P.R

Two of the analog inputs are loose , but everything works good .

NuForce Icon iDo Apple-Compatible DAC/Headphone Amp (Playback 56). Condition is Used. Shipped with USPS Ground Advantage.

Normal 0 false false false EN-US X-NONE X-NONE NU FORCE ICON INTEGRATED DESKTOP AUDIO AMPLIFIER - WITH A USB DAC INPUT LOOKS TO BE NEW TESTED & WORKING CORRECTLY IN ALL MODES AND JACKS TESTED:RCA INPUTSUSB INPUT FROM A COMPUTER, PLUGGED INTO A WINDOWS COMPUTER, RECOGNIZED IMMEDIATELY IN WINDOWS DEVICE MANAGER AS USB DAC AND PRODUCING SOUND CORRECTLY, SEE LAST PICTURE FOR DEVICE MANAGER HEADPHONE JACK3.5MM REAR INPUT JACKLINE OUT JACK ON REARRJ-45 SPEAKER JACKS INCLUDES:ICON MINI DESKTOP AMPLIFIER, SPEAKER CABLES WITH GOLD MALE BANANA PLUGS, ORIGINAL AC ADAPTER, POWER CORD, USB CORD, SILICONE STAND, MANUAL, 4 STICK ON RUBBER PADS (FOR HORIZONTAL USE) Product highlights: 18 watts x 2 channels into 8 ohms at 1% THD+N24 watts x 2 channels into 4 ohms at 1% THD+Nbuilt-in 96kHz/24-bit USB DAChigh-performance headphone amplifier3.5mm stereo minijack audio input1 pair RCA analog audio inputsstereo minijack audio outputsilicone standRJ-45 speaker connectors (speaker wire included)AC adapter handles worldwide voltages (60W, 100-240VAC)1-1/4W x 6H x 4-1/2Dweight: 1 lb. FeaturesOverview: The icon is a desktop amplifier with a headphone amp and digital to analog converter built in. There are three inputs, USB (digital), stereo RCA, and stereo mini-jack, along with a mini-jack line output and a 3.5mm headphone jack. USB Input: The USB input is designed to connect to your computers USB port, allowing the icon to act as the sound card and amplifier. The input is a USB Type-B port and a USB Type-A to USB Type-B cable is included. Analog Inputs: There are two analog inputs, stereo RCAs and a 3.5mm stereo mini-jack, both on the rear panel. Speaker Outputs: The amplified outputs are RJ-45 terminals and speaker wire is included with the amp (with an RJ-45 connector on one end and two single banana plugs on the other). When using the NuForce S-X speakers, the wire included with the speakers should be used, which has RJ-45 connectors on both ends. Controls: Power: rotary power/volume control on the front panel; controls the volume for both the speaker level and front panel headphone outputs; turn fully counterclockwise to turn the unit offInput: rotary input selector switch; three position, mini-jack, RCA, and USB Connections: Front: 1/8 headphone; stereo; compatible with headphones up to 32 ohms; 31.25 mW x 2 @ 32 ohms; 80 mW x 2 @ 16 ohms; THD+N 0.05%; 20 Hz-20 kHzRear:Power: DC input for use with included power supplyInput 1: stereo mini-jack (3.5mm)Input 2: stereo RCAs; maximum 2.0 voltsInput 3: USB Type-B input; compatible with USB 1.1 and 2.0 (full speed and high speed); USB cable included; 96 kHz maximum sampling rate; 24 bit resolutionSpeaker Output: left and right RJ-45 terminals; muted when headphones are plugged inLine Output: stereo mini-jack; use the icon2 as a preamp or add a powered subwoofer SHIPPING TO A REAL STREET ADDRESS ONLY, NO PO BOXES NO SHIPPING TO ALASKA, HAWAII, P.R

Normal 0 false false false EN-US X-NONE X-NONE NU FORCE ICON INTEGRATED DESKTOP AUDIO AMPLIFIER - WITH A USB DAC INPUT LOOKS TO BE NEW TESTED & WORKING CORRECTLY IN ALL MODES AND JACKS TESTED:RCA INPUTSUSB INPUT FROM A COMPUTER, PLUGGED INTO A WINDOWS COMPUTER, RECOGNIZED IMMEDIATELY IN WINDOWS DEVICE MANAGER AS USB DAC AND PRODUCING SOUND CORRECTLY, SEE LAST PICTURE FOR DEVICE MANAGER HEADPHONE JACK3.5MM REAR INPUT JACKLINE OUT JACK ON REARRJ-45 SPEAKER JACKS INCLUDES:ICON MINI DESKTOP AMPLIFIER, SPEAKER CABLES WITH GOLD MALE BANANA PLUGS, ORIGINAL AC ADAPTER, POWER CORD, USB CORD, SILICONE STAND, MANUAL, 4 STICK ON RUBBER PADS (FOR HORIZONTAL USE) Product highlights: 18 watts x 2 channels into 8 ohms at 1% THD+N24 watts x 2 channels into 4 ohms at 1% THD+Nbuilt-in 96kHz/24-bit USB DAChigh-performance headphone amplifier3.5mm stereo minijack audio input1 pair RCA analog audio inputsstereo minijack audio outputsilicone standRJ-45 speaker connectors (speaker wire included)AC adapter handles worldwide voltages (60W, 100-240VAC)1-1/4W x 6H x 4-1/2Dweight: 1 lb. FeaturesOverview: The icon is a desktop amplifier with a headphone amp and digital to analog converter built in. There are three inputs, USB (digital), stereo RCA, and stereo mini-jack, along with a mini-jack line output and a 3.5mm headphone jack. USB Input: The USB input is designed to connect to your computers USB port, allowing the icon to act as the sound card and amplifier. The input is a USB Type-B port and a USB Type-A to USB Type-B cable is included. Analog Inputs: There are two analog inputs, stereo RCAs and a 3.5mm stereo mini-jack, both on the rear panel. Speaker Outputs: The amplified outputs are RJ-45 terminals and speaker wire is included with the amp (with an RJ-45 connector on one end and two single banana plugs on the other). When using the NuForce S-X speakers, the wire included with the speakers should be used, which has RJ-45 connectors on both ends. Controls: Power: rotary power/volume control on the front panel; controls the volume for both the speaker level and front panel headphone outputs; turn fully counterclockwise to turn the unit offInput: rotary input selector switch; three position, mini-jack, RCA, and USB Connections: Front: 1/8 headphone; stereo; compatible with headphones up to 32 ohms; 31.25 mW x 2 @ 32 ohms; 80 mW x 2 @ 16 ohms; THD+N 0.05%; 20 Hz-20 kHzRear:Power: DC input for use with included power supplyInput 1: stereo mini-jack (3.5mm)Input 2: stereo RCAs; maximum 2.0 voltsInput 3: USB Type-B input; compatible with USB 1.1 and 2.0 (full speed and high speed); USB cable included; 96 kHz maximum sampling rate; 24 bit resolutionSpeaker Output: left and right RJ-45 terminals; muted when headphones are plugged inLine Output: stereo mini-jack; use the icon2 as a preamp or add a powered subwoofer SHIPPING TO A REAL STREET ADDRESS ONLY, NO PO BOXES NO SHIPPING TO ALASKA, HAWAII, P.R

Good condition. No USB cable included. The NuForce uDAC took the head-fi world by surprise when it was launched and set a benchmark for entry level digital to analog converters. uDac Features : Discrete USB audio receiver, D/A converter and headphone ampCoaxial S/PDIF output (turn off volume control to activate)Double jitter-reduction mechanism at data level and at oversampling filter stageHigh voltage 2V analog outputHigh-quality analog volume control Specifications : Input USB (USB 1.1, 2.0 compatible)USB DAC: USB 1.1, 2.0 compatible. USB native bit rate: 32-48kHz, 16-bitMaximum sampling rate: 48kHzResolution: 16-bitsOutput Analog RCA Output = 2VrmsDynamic Range: 110dBTHD+N= -95 dBS/N Ratio: 98dBDigital Output: coaxial RCA 75-ohmHeadphone output jackPower output: 80mW x 2 @16-OhmTHD+N 0.05% Power USB poweredDimensions 68 x 38 x 21 (mm)

viewport content=width=device-width, initial-scale=1> NUFORCE ICON-UDAC2 D/A Converter - excellent Description Model number: ICON-UDAC2Warranty period 3 months Warranty Estimated shipping date 3-4 days later Registration date September 25, 2021 Features/NotesGood sound! small! High cost performance! It is a DACWEB No.2013050000032357[Display based on the Secondhand Goods Business Law: Chiba Prefecture Public Safety Commission No. 441100001459] ?Note only for products that are turned on.?????????????Products that do not turn on are not eligible? The power supply for this product is AC100V 50/60Hz.A transformer may be required in some countries.Please prepare the transformer on the purchase side. Outlet specifications??A typeIf it is different from A type, a converter is required. You in areas other than 100V.If you use the transformer I sell, you can use it in areas other than 100V.ebay.comhttp://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813 ebay.euhttps://www.ebay.com/itm/373547520926ebay.auhttps://www.ebay.com/itm/373547520958We also sell other than ebay.com.Please contact us if you would like to purchase.If you have any other questions, please contact me.* It may not be possible in some areasPlease consider carefully.Payment ??We accept payment by PayPal only. ??Please payment within ??3 days after the auction closed. Shipping free shippingShip by express EMS?or DHL or FedExWe will deliver by the fastest delivery method. Shipment with damage / loss insuranceWith tracking number ??(10-15 days to US) ??(10-30days or more to Other countries) Terms of Sale ??[About returned goods]????Returns are accepted only if the item was ? not the item described in the aution. [Return] Returned goods for personal reasons will not be accepted. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Provided by HARU

Estate auction find, I have no way to test it, no cables, SOLD AS IS PARTS OR REPAIR UNTESTED

NuForce - iCON uDAC2 USB Dac W / Kopfhörer Verstärker Gebrauchte Guter ZustandDas Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns.  NuForce - iCON uDAC2 | USB-DAC mit Kopfhörerverstärker, gebraucht, guter Zustand   Beschreibung Modellnummer: ICON-UDAC2Garantiezeitraum 3 Monate Garantie Voraussichtliches Versanddatum 3-4 Tage später Registrierungsdatum 25. September 2021 Funktionen/AnmerkungenGuter Klang! klein! Hohes Preis-Leistungs-Verhältnis! Es handelt sich um eine DACWEB-Nr.2013050000032357[Anzeige basierend auf dem Secondhand Goods Business Law: Kommission für öffentliche Sicherheit der Präfektur Chiba Nr. 441100001459]Wenn Sie Fragen haben, können Sie mich gerne kontaktieren.Bitte überprüfen Sie den Zustand des Produkts anhand des Fotos.Alle Artikel sind im Bild.?Hinweis nur für eingeschaltete Produkte. Produkte, die sich nicht einschalten lassen, sind nicht berechtigt.?  Die Stromversorgung für dieses Produkt ist AC100V 50/60Hz.In einigen Ländern ist möglicherweise ein Transformator erforderlich.Bitte bereiten Sie den Transformator kaufseitig vor. Steckdosenspezifikationen ?A-TypWenn es sich vom A-Typ unterscheidet, ist ein Konverter erforderlich.     Sie in anderen Bereichen als 100 V.Wenn Sie den von mir verkauften Transformator verwenden, können Sie ihn in anderen Bereichen als 100 V verwenden.eBay.comhttps://www.ebay.com/itm/373547463184Ebay UKhttps://www.ebay.com/itm/373547520813eBay.euhttps://www.ebay.com/itm/373547520926eBay.auhttps://www.ebay.com/itm/373547520958Wir verkaufen auch außerhalb von eBay.com.Bitte kontaktieren Sie uns, wenn Sie einen Kauf tätigen möchten.Wenn Sie weitere Fragen haben, kontaktieren Sie mich bitte.* In einigen Gebieten ist dies möglicherweise nicht möglichBitte überlegen Sie sorgfältig.In meinem Geschäft überprüfe ich die Artikel, die vor dem Versand überprüft werden müssen. Ich mache ein Video der Bestätigung des Vorgangs. Sie können das Video auf YouTube ansehen. Dieser Service gibt Käufern Sicherheit.Zahlung ??Bitte zahlen Sie innerhalb ??3 Tage nach Auktionsende. Versand Versand per Express-EMS, DHL oder FedExWir liefern mit der schnellsten Versandart.Versand mit Schadens-/VerlustversicherungMit einer Verfolgungs Nummer??(10-15 Tage in die USA) ??(10-30 Tage oder mehr in andere Länder) Verkaufsbedingungen ??[Über zurückgegebene Waren]????Rücksendungen werden nur akzeptiert, wenn der Artikel im Originalzustand war?   nicht der in der Auktion beschriebene Artikel.            [Zurückkehren]       Rücksendungen aus persönlichen Gründen werden nicht akzeptiert.    Internationale Käufer – Bitte beachten Sie: Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers. Bitte erkundigen Sie sich vor dem Bieten oder Kaufen beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sein werden.  Bereitgestellt von HARUModellnummer: ICON-UDAC2Garantiezeitraum 3 Monate Garantie Voraussichtliches Versanddatum 3-4 Tage später Registrierungsdatum 25. September 2021 Funktionen/AnmerkungenGuter Klang! klein! Hohes Preis-Leistungs-Verhältnis! Es handelt sich um eine DACWEB-Nr.2013050000032357[Anzeige basierend auf dem Secondhand Goods Business Law: Kommission für öffentliche Sicherheit der Präfektur Chiba Nr. 441100001459]Wenn Sie Fragen haben, können Sie mich gerne kontaktieren.Bitte überprüfen Sie den Zustand des Produkts anhand des Fotos.Alle Artikel sind im Bild.?Hinweis nur für eingeschaltete Produkte. Produkte, die sich nicht einschalten lassen, sind nicht berechtigt.?  Die Stromversorgung für dieses Produkt ist AC100V 50/60Hz.In einigen Ländern ist möglicherweise ein Transformator erforderlich.Bitte bere Digital output Coaxial RCA 75? Number of L/R RCA Inputs 1 MPN Does not apply Brand NuForce UPC Does not apply Model iCON uDAC2 Type Headphone Amplifier; DAC

NuForce - iCON uDAC2 | USB DAC w/ Headphone Amplifier Pre-Owned Good Condition Description Model number: ICON-UDAC2Warranty period 3 months Warranty Estimated shipping date 3-4 days later Registration date September 25, 2021 Features/NotesGood sound! small! High cost performance! It is a DACWEB No.2013050000032357[Display based on the Secondhand Goods Business Law: Chiba Prefecture Public Safety Commission No. 441100001459] If you have any questions, please feel free to contact me.Please check the condition of the product in the photo.All items are in the picture.?Note only for products that are turned on.?????????????Products that do not turn on are not eligible? The power supply for this product is AC100V 50/60Hz.A transformer may be required in some countries.Please prepare the transformer on the purchase side. Outlet specifications??A typeIf it is different from A type, a converter is required. You in areas other than 100V.If you use the transformer I sell, you can use it in areas other than 100V.ebay.comhttp://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813 ebay.euhttps://www.ebay.com/itm/373547520926ebay.auhttps://www.ebay.com/itm/373547520958We also sell other than ebay.com.Please contact us if you would like to purchase.If you have any other questions, please contact me.* It may not be possible in some areasPlease consider carefully.At my shop, I will check the items that need to be checked before shipping.I will take a video of the operation confirmation.You can check the video on YouTube.This service gives buyers peace of mind.Payment ??Please payment within ??3 days after the auction closed. Shipping Ship by express EMS?or DHL or FedExWe will deliver by the fastest delivery method. Shipment with damage / loss insuranceWith tracking number ??(10-15 days to US) ??(10-30days or more to Other countries) Terms of Sale ??[About returned goods]????Returns are accepted only if the item was ? not the item described in the aution. [Return] Returned goods for personal reasons will not be accepted. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Provided by HARU

This NuForce package includes a pair of NuForce S-1 desktop speakers AND the NuForce ICON, an integrated desktop audio amplifier.    S-1 desktops speakers are designed to coordinate with the ICON. Items are in excellent working condition, However there is a nick on the top corner of one of the speakers (please see photo). Items will ship in their original packaging.  The speakers will arrive in 1 box and the ICON in a separate box. S-1 Desktop Speakers Speaker specifications: 1)    3.5” Titanium full-range driver 2)    Neodymium magnet 3)    Impedance: 8 Ohm 4)    Sensitivity: 87dB 1W/1m 5)    Frequency Response: 80 Hz to 20 kHz 6)    Maximum power input: 30W 7)    Dimension: 9.5” x 6” x 4.75” 8)    Weight: 5.5 lb each 9)    Product Number: 895029002193 10)   Part Number: NF-S1-SIL-BLUE 11)  Serial No: S1-0200011 12)  Includes a pair of 1 meter speaker cables (RJ45 to RJ45)    ICON The following are included with the ICON: 1)    AC adapter 2)   USB cable – this is an upgraded NuForce gold plated USB cable (see photos) 3)    A pair of 1 meter speaker cables (RJ45 to banana) 4)    AC power cord Note:  The vertical plastic stand that was part of the original ICON package is not included. ICON specifications: 1)    Inputs:     a.      3.5mm Stereo     b.      RCA     c.      USB 2)   Headphone Output:     a.      Maximum output @32 ohm Load: 31.25mW     b.      THD (20Hz – 20KHz) : <0.03%     c.      Frequency Response (20 Hz – 20kHz) < -1dB 3)    Line Out (for Subwoofer) connection 4)    USB DAC 5)    Power = 12WX2 6)    THD+N=0.05%, 1kHz, 2W @ 40ohm load. THD+N=0.06%,1kHz, 2W @ 8ohm load 7)     SNR = 84 db at 7W @ 8ohm 8)     Power Adapter: 12-14V, 25W, 100-240VAC worldwide voltages 9)     Dimension: 6” x 4 ½” x 1” 10)  Weight: 1lb

This NuForce package includes a pair of NuForce S-1 desktop speakers AND the NuForce ICON, an integrated desktop audio amplifier.    S-1 desktops speakers are designed to coordinate with the ICON. Items are in excellent working condition, However there is a nick on the top corner of one of the speakers (please see photo). Items will ship in their original packaging.  The speakers will arrive in 1 box and the ICON in a separate box. S-1 Desktop Speakers Speaker specifications: 1)    3.5” Titanium full-range driver 2)    Neodymium magnet 3)    Impedance: 8 Ohm 4)    Sensitivity: 87dB 1W/1m 5)    Frequency Response: 80 Hz to 20 kHz 6)    Maximum power input: 30W 7)    Dimension: 9.5” x 6” x 4.75” 8)    Weight: 5.5 lb each 9)    Product Number: 895029002193 10)   Part Number: NF-S1-SIL-BLUE 11)  Serial No: S1-0200011 12)  Includes a pair of 1 meter speaker cables (RJ45 to RJ45)    ICON The following are included with the ICON: 1)    AC adapter 2)   USB cable – this is an upgraded NuForce gold plated USB cable (see photos) 3)    A pair of 1 meter speaker cables (RJ45 to banana) 4)    AC power cord Note:  The vertical plastic stand that was part of the original ICON package is not included. ICON specifications: 1)    Inputs:     a.      3.5mm Stereo     b.      RCA     c.      USB 2)   Headphone Output:     a.      Maximum output @32 ohm Load: 31.25mW     b.      THD (20Hz – 20KHz) : <0.03%     c.      Frequency Response (20 Hz – 20kHz) < -1dB 3)    Line Out (for Subwoofer) connection 4)    USB DAC 5)    Power = 12WX2 6)    THD+N=0.05%, 1kHz, 2W @ 40ohm load. THD+N=0.06%,1kHz, 2W @ 8ohm load 7)     SNR = 84 db at 7W @ 8ohm 8)     Power Adapter: 12-14V, 25W, 100-240VAC worldwide voltages 9)     Dimension: 6” x 4 ½” x 1” 10)  Weight: 1lb

NuForce Icon HDP Headphone Amp / USB DAC / Stereo Preamp / Box Manual ( Black ) Excellent Condition Retailed For $450.00 Used / Excellent Condition / Main Unit / Stand / Power Supply / Manual-Box / Receipt / Great Sounding And Build Quality Product highlights:low-distortion, high-current headphone amplifier (drives headphones up to 600 ohms)THD+N: 0.001% at 1 kHzfrequency response: 10Hz to 100kHz (-0.5dB)signal-to-noise ratio: >100dBbuilt-in high-resolution DAC (192kHz/24-bit for optical and coaxial digital input, 96kHz/24-bit for USB input)digital inputs:RCA coaxial or 3.5mm opticalUSB Type Banalog inputs:1 pair line-level RCA stereo audio3.5mm minijack (overrides RCA inputs when connected)1 pair high-quality, gold-plated RCA analog outputsexternal power supplyremovable non-slip silicone standhigh-quality analog volume control for improved channel tracking at low listening levelshigh-voltage 2V analog outputdigital inputs use no capacitors in the audio signal path for cleaner sound1-5/16W x 6H x 4-3/8D (3-3/16W x 6-3/8H on stand)If connecting to a TV, please make sure you can select PCM output in its audio menu.

This NuForce package includes a pair of NuForce S-1 desktop speakers AND the NuForce ICON, an integrated desktop audio amplifier.    S-1 desktops speakers are designed to coordinate with the ICON. Items are in excellent working condition, However there is a nick on the top corner of one of the speakers (please see photo). Items will ship in their original packaging.  The speakers will arrive in 1 box and the ICON in a separate box. S-1 Desktop Speakers Speaker specifications: 1)    3.5” Titanium full-range driver 2)    Neodymium magnet 3)    Impedance: 8 Ohm 4)    Sensitivity: 87dB 1W/1m 5)    Frequency Response: 80 Hz to 20 kHz 6)    Maximum power input: 30W 7)    Dimension: 9.5” x 6” x 4.75” 8)    Weight: 5.5 lb each 9)    Product Number: 895029002193 10)   Part Number: NF-S1-SIL-BLUE 11)  Serial No: S1-0200011 12)  Includes a pair of 1 meter speaker cables (RJ45 to RJ45)    ICON The following are included with the ICON: 1)    AC adapter 2)   USB cable – this is an upgraded NuForce gold plated USB cable (see photos) 3)    A pair of 1 meter speaker cables (RJ45 to banana) 4)    AC power cord Note:  The vertical plastic stand that was part of the original ICON package is not included. ICON specifications: 1)    Inputs:     a.      3.5mm Stereo     b.      RCA     c.      USB 2)   Headphone Output:     a.      Maximum output @32 ohm Load: 31.25mW     b.      THD (20Hz – 20KHz) : <0.03%     c.      Frequency Response (20 Hz – 20kHz) < -1dB 3)    Line Out (for Subwoofer) connection 4)    USB DAC 5)    Power = 12WX2 6)    THD+N=0.05%, 1kHz, 2W @ 40ohm load. THD+N=0.06%,1kHz, 2W @ 8ohm load 7)     SNR = 84 db at 7W @ 8ohm 8)     Power Adapter: 12-14V, 25W, 100-240VAC worldwide voltages 9)     Dimension: 6” x 4 ½” x 1” 10)  Weight: 1lb

NuForce Icon uDAC 1st generation. Tested and working.

This is a complete audio system for a small room or home office. The Nuforce Icon 2 Integrated Amp with built in USB DAC plus RCA and 3.5mm Stereo Jack inputs. Headphone jack in front. Also included are a pair of matched Nuforce S1 speakers in black. This was a part of my office system running off various Macs: A MacBook Pro and Mac Mini. The sound is pretty amazing coming from these little speakers, which are quite heavy for their size. Overall, everything is in VG condition, the Icon is closer to Excellent. There are some smudges on the speakers and light scratches on the sides of each speaker. One driver has a slight streak of discoloration but none of these things affect the performance. Icon has original packaging, stand, power cable/transformer, manual and special speaker cables for the S1s. A great little system that will surprise you for sure! Icon Specs shown below-note-these speakers take a unique RJ-45 connector and do not use traditional hook up so you will need to use the cables provided. You will need your own USB cable as the original is not included. S1 Speaker Specs:3.5 Titanium full-range driverImpedance: 8 OhmSensitivity 87dB 1W/1m Frequency Response: 80 Hz to 20 kH Maximum power input: 30WIcon Integrated Amp Specs:18 watts x 2 channels into 8 ohms at 1% THD+N24 watts x 2 channels into 4 ohms at 1% THD+Nbuilt-in 96kHz/24-bit USB DAChigh-performance headphone amplifier3.5mm stereo minijack audio input1 pair RCA analog audio inputsstereo minijack audio outputsilicone standRJ-45 speaker connectors (speaker wire included)AC adapter handles worldwide voltages (60W, 100-240VAC)1-1/4W x 6H x 4-1/2Dweight: 1 lb. I will ship anywhere in the US and to select places worldwide-but note this is wired for US. Thanks for looking.

Picked this up at an estate sale full of audio equipment.In excellent condition and appears to be working fine. Product Features: USB DAC and Headphone AmpAudiophile quality conversionUSB DAC offers 24-bit resolution and 48 kHz sampling rate for clean and transparent analog signalUsing analog RCA outputs or single coaxial allow the iDo to be used with a home stereo system3.5mm conventional stereo jack drives headphones up to 300 OhmsDigitally controlled analog volume adjustments offer accurate channel balance, resolution, and clarityAlso available in Silver, Blue, and BlackPackage includes DC power supply and 30-pin charge/sync USB cable Technical Specifications: Input: USBSampling Rate: 48 kHzResolution: 24-BitOutput: Analog RCA or Coaxial RCATotal Harmonic Distortion: 0.01%Frequency Response: 10-20000 HzSNR: >95 dBPower Requirement: 6.5V, 2.3A, 100-240 VACDimensions: 6W x 4-1/2D x 1H Please, Please Ask Questions first. We do not accept returns.We DO Guarantee that the item will arrive exactly as describedWhen an item sells the Seller is charged fees that they can not get back. We can not cancel orders or accept returns after the item has shipped.We also can not cancel orders once the payment has been processed.Thank you for looking and I hope you find a great deal today!

This is a complete audio system for a small room or home office. The Nuforce Icon 2 Integrated Amp with built in USB DAC plus RCA and 3.5mm Stereo Jack inputs. Headphone jack in front. Also included are a pair of matched Nuforce S1 speakers in black. This was a part of my office system running off various Macs: A MacBook Pro and Mac Mini. The sound is pretty amazing coming from these little speakers, which are quite heavy for their size. Overall, everything is in VG condition, the Icon is closer to Excellent. There are some smudges on the speakers and light scratches on the sides of each speaker. One driver has a slight streak of discoloration but none of these things affect the performance. Icon has original packaging, stand, power cable/transformer, manual and special speaker cables for the S1s. A great little system that will surprise you for sure! Icon Specs shown below-note-these speakers take a unique RJ-45 connector and do not use traditional hook up so you will need to use the cables provided. You will need your own USB cable as the original is not included. S1 Speaker Specs:3.5 Titanium full-range driverImpedance: 8 OhmSensitivity 87dB 1W/1m Frequency Response: 80 Hz to 20 kH Maximum power input: 30WIcon Integrated Amp Specs:18 watts x 2 channels into 8 ohms at 1% THD+N24 watts x 2 channels into 4 ohms at 1% THD+Nbuilt-in 96kHz/24-bit USB DAChigh-performance headphone amplifier3.5mm stereo minijack audio input1 pair RCA analog audio inputsstereo minijack audio outputsilicone standRJ-45 speaker connectors (speaker wire included)AC adapter handles worldwide voltages (60W, 100-240VAC)1-1/4W x 6H x 4-1/2Dweight: 1 lb. I will ship anywhere in the US and to select places worldwide-but note this is wired for US. Thanks for looking.