Working record player with good needle from vintage Fisher multi-component system from the 80s. If you dont have a component system with a head unit amplifier, it works using a pre-amp I bought (included with power cord) to work with any speaker with a headphone jack input (You plug record player AC cord into pre-amp, then pre-amp to speaker. (Youll need an AC plug to headphone jack cord to run from the pre-amp to your speaker). Reject button doesnt work, but the lift stick does (serves same basic purpose). Does not automatically take needle off at conclusion of record. Records sounds really good using this setup. The arm weight isnt adequate, so you have to put a dime on top (included and attached). I think this is because the original needle attachment weighed more. I replaced the needle when the original broke. I designed a box with holes matching the cords and speed switch because the player doesnt have a dust cover. I would use this box to ship it in, and you could then keep it if you want to use with the player.

Working record player with good needle from vintage Fisher multi-component system from the 80s. If you dont have a component system with a head unit amplifier, it works using a pre-amp I bought (included with power cord) to work with any speaker with a headphone jack input (You plug record player AC cord into pre-amp, then pre-amp to speaker. (Youll need an AC plug to headphone jack cord to run from the pre-amp to your speaker). Reject button doesnt work, but the lift stick does (serves same basic purpose). Does not automatically take needle off at conclusion of record. Records sounds really good using this setup. The arm weight isnt adequate, so you have to put a dime on top (included and attached). I think this is because the original needle attachment weighed more. I replaced the needle when the original broke. I designed a box with holes matching the cords and speed switch because the player doesnt have a dust cover. I would use this box to ship it in, and you could then keep it if you want to use with the player.

Working record player with good needle from vintage Fisher multi-component system from the 80s. If you dont have a component system with a head unit amplifier, it works using a pre-amp I bought (included with power cord) to work with any speaker with a headphone jack input (You plug record player AC cord into pre-amp, then pre-amp to speaker. (Youll need an AC plug to headphone jack cord to run from the pre-amp to your speaker). Reject button doesnt work, but the lift stick does (serves same basic purpose). Does not automatically take needle off at conclusion of record. Records sounds really good using this setup. The arm weight isnt adequate, so you have to put a dime on top (included and attached). I think this is because the original needle attachment weighed more. I replaced the needle when the original broke. I designed a box with holes matching the cords and speed switch because the player doesnt have a dust cover. I would use this box to ship it in, and you could then keep it if you want to use with the player.

Working record player with good needle from vintage Fisher multi-component system from the 80s. If you dont have a component system with a head unit amplifier, it works using a pre-amp I bought (included with power cord) to work with any speaker with a headphone jack input (You plug record player AC cord into pre-amp, then pre-amp to speaker. (Youll need an AC plug to headphone jack cord to run from the pre-amp to your speaker). Reject button doesnt work, but the lift stick does (serves same basic purpose). Does not automatically take needle off at conclusion of record. Records sounds really good using this setup. The arm weight isnt adequate, so you have to put a dime on top (included and attached). I think this is because the original needle attachment weighed more. I replaced the needle when the original broke. I designed a box with holes matching the cords and speed switch because the player doesnt have a dust cover. I would use this box to ship it in, and you could then keep it if you want to use with the player.

Working record player with good needle from vintage Fisher multi-component system from the 80s. If you dont have a component system with a head unit amplifier, it works using a pre-amp I bought (included with power cord) to work with any speaker with a headphone jack input (You plug record player AC cord into pre-amp, then pre-amp to speaker. (Youll need an AC plug to headphone jack cord to run from the pre-amp to your speaker). Reject button doesnt work, but the lift stick does (serves same basic purpose). Does not automatically take needle off at conclusion of record. Records sounds really good using this setup. The arm weight isnt adequate, so you have to put a dime on top (included and attached). I think this is because the original needle attachment weighed more. I replaced the needle when the original broke. I designed a box with holes matching the cords and speed switch because the player doesnt have a dust cover. I would use this box to ship it in, and you could then keep it if you want to use with the player.

Vintage Fisher Studio Standard MT-911 Servo Drive Stereo Record Turntable ST-09D. Cosmetically the unit is in really good condition clean looking. The turntable does not have the cover and does not come with a needle. Unit has only been dry tested, meaning: I only powered it on and moved the arm Over. The tune table engaged and stopped when replaced. With that being said I am pretty confident it works so I will allow up to 5 days after delivery to request a refund. Note(I don’t do partial refunds) so if it does not work you can request a return. Please keep all packaging and return item in same condition. Bundled with fast free shipping and local pickup welcomed! Lot#0.19FEB1819

Fisher MT-914A Full Automatic Stereo Turntable Record Player FULLY WORKINGVG CONDITION COMES WITH 45 ADAPTERTHERE IS NO DUST COVER NO OTHER ACCESSORIES

Fisher MT-911 Turntable Record Player HiFi Stereo Vintage Home Audio PARTS NEEDS STYLUS. Everything appears to functions as intended but the needle is broken. No dust cover.

This Fisher Studio Standard turntable with Servo belt drive is a vintage gem. Its sleek design is timeless. The brand itself is well-known for producing top-notch audio equipment, making this turntable a must-have to spin your vinyl. No dust cover and no stylus both of which can be replaced at minimal expense to give you a high quality device. Belt is in tact and everything is in working order. Arm lifts and returns as it should.

Fisher Studi0 Standard MT-9115 Semi Automatic Turntable Tested. I don’t know a lot about it other than it wasn’t used much and powered right up for me.

Thank you for browsing my listing. This item is a Vintage Fisher Servo drive Semi automatic turntable MT-911A With Manual. I tested it, playing a couple of records with no issue. Please refer to the pictures for the condition. If you have any questions, please do not hesitate to contact me prior to your purchase. I have a 30 day DOMESTIC return policy on this listing. Return shipping will be paid by the buyer and the item must be in the same condition as it is now. Only the purchase price will be refunded after the item is returned.

Fisher MT-911 service manual. This is an original factory released manual, not a copy.In good used condition. We will include a stiff cardboard insert and a Please Do Not Bend sticker to help preserve the integrity of the manual

Das angebotene Produkt ist NICHT für andere ähnliche Modelle geeignet ! Die genaue Bezeichnung Ihres Gerätes finden Sie entweder auf der Gerätefront, Geräterückseite, Geräteunterseite oder in den seitlichen Kabelfächern. The offered product may NOT be used for any other similar models ! The accurate name of your device can be found either on the front, rear or bottom side or at side cable trays.Antriebsriemen für Fisher MT 913 Plattenspieler1 FlachriemenDrive Belt for Fisher MT 913 Turntable1 flat beltBlackReel Angebotsnummer 6656.4 - 20835

Das angebotene Produkt ist NICHT für andere ähnliche Modelle geeignet ! Die genaue Bezeichnung Ihres Gerätes finden Sie entweder auf der Gerätefront, Geräterückseite, Geräteunterseite oder in den seitlichen Kabelfächern. The offered product may NOT be used for any other similar models ! The accurate name of your device can be found either on the front, rear or bottom side or at side cable trays.Antriebsriemen für Fisher MT 91 Plattenspieler1 FlachriemenDrive Belt for Fisher MT 91 Turntable1 flat beltBlackReel Angebotsnummer 6652.4 - 20833

Das angebotene Produkt ist NICHT für andere ähnliche Modelle geeignet ! Die genaue Bezeichnung Ihres Gerätes finden Sie entweder auf der Gerätefront, Geräterückseite, Geräteunterseite oder in den seitlichen Kabelfächern. The offered product may NOT be used for any other similar models ! The accurate name of your device can be found either on the front, rear or bottom side or at side cable trays.Kit 27 für Fisher MT 913 Plattenspieler1 Sinterlager Öl 10ml1 FlachriemenKit 27 for Fisher MT 913 Turntable1 glide bearing oil 10ml1 flat beltBlackReel Angebotsnummer 6656.52 - 20836

Das angebotene Produkt ist NICHT für andere ähnliche Modelle geeignet ! Die genaue Bezeichnung Ihres Gerätes finden Sie entweder auf der Gerätefront, Geräterückseite, Geräteunterseite oder in den seitlichen Kabelfächern. The offered product may NOT be used for any other similar models ! The accurate name of your device can be found either on the front, rear or bottom side or at side cable trays.Kit 27 für Fisher MT 91 Plattenspieler1 Sinterlager Öl 10ml1 FlachriemenKit 27 for Fisher MT 91 Turntable1 glide bearing oil 10ml1 flat beltBlackReel Angebotsnummer 6652.52 - 20834

Das angebotene Produkt ist NICHT für andere ähnliche Modelle geeignet ! Die genaue Bezeichnung Ihres Gerätes finden Sie entweder auf der Gerätefront, Geräterückseite, Geräteunterseite oder in den seitlichen Kabelfächern. The offered product may NOT be used for any other similar models ! The accurate name of your device can be found either on the front, rear or bottom side or at side cable trays.Antriebsriemen für Fisher MT 1913 Plattenspieler1 FlachriemenDrive Belt for Fisher MT 1913 Turntable1 flat beltBlackReel Angebotsnummer 6499.4 - 20669

Das angebotene Produkt ist NICHT für andere ähnliche Modelle geeignet ! Die genaue Bezeichnung Ihres Gerätes finden Sie entweder auf der Gerätefront, Geräterückseite, Geräteunterseite oder in den seitlichen Kabelfächern. The offered product may NOT be used for any other similar models ! The accurate name of your device can be found either on the front, rear or bottom side or at side cable trays.Kit 27 für Fisher MT 1913 Plattenspieler1 Sinterlager Öl 10ml1 FlachriemenKit 27 for Fisher MT 1913 Turntable1 glide bearing oil 10ml1 flat beltBlackReel Angebotsnummer 6499.52 - 20670