fidelity-research FR FR-6E Stereo Moving Magnet MM Cartridge Phono Pick-up Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance is a beautiful product without any noticeable scratches. w/ Headshell (FR-S2) Specifications MM typeOutput voltage 7mV(5cm/sec)Needle pressure 2~2.5gPlayback frequency bandwidth 20-20,000HzChannel separation 24dB/1kHzCompliance 10×10-6cm/dyneLoad resistance 50k??Impedance 0.8k?/1kHz?Needle tip 0.2 x 0.8milWeight 5.5g Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

fidelity-research FR-64S Tonearm w/ Weight PHONO Oil Refilled Cable Lifter Japan Description Condition: Used fidelity-research FR-64S TonearmTo reduce vibration, this tonearm uses stainless steel, which is three times stronger than the aluminum alloy included with the cable. It is designed to be easy to use and allows you to balance the cartridge over a wide range. It is a very popular tonearm that is said to have enthusiasts worldwide.?ConditionEach part has been polished and cleaned.There are some fine scratches, but overall there are no noticeable scratches and it is shiny and in good condition. There is no major damage to the accessories such as cables. Overall, it is in good condition. Considering the age, we judge it to be a good product.?OperationIt works well.It has been confirmed to work with our equipment.?Output from both channels?Lifter descent speed (oil refilled)?All adjustments, operation feel, height adjustment ..etc.are in good working order.?Product DetailsManufacturer: fidelity-researchModel Number: FR-64S?Accessories?Standard Weight?Lateral Weight?Inside force Weight (small)?Mounting Nut/Washer?PHONO Cable?Instruction Manual (copy)?Template (copy) All my products are 100% Authentic.Please feel free to contact us if you have any question.Please check the picture. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. Yamaha YSP-2700 Digital Sound Bar Projector Black Wi-Fi Music Cast YSP2700 Japan

Fidelity-research FRT-3 Toroidal Transformer In Excellent Condition Item Description This unit is in excellent condition (please see photos). This Transformer has been checked and tested and confirmed working perfectly. The knob is not original. Shipping Policy We ship the item via DHL with a tracking number. The item will arrive in approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be before bidding or buying. Except in the case of faulty or damaged items, refunds do not include any return shipping or shipping charges. Your return shipping charge will be deducted from your refund if you receive any.

Description Manufacturer: fidelity-research Model number: FR-64S There are some small scratches, but overall there are no noticeable scratches and it is shiny and in good condition. The cables and other accessories are also in good condition. Accessories Standard weight Lateral weight Inside force weight (small) Mounting nut/washer PHONO cable Instruction manual (copy) Template (copy) Includings are all shown in the photos. Please check the photos carefully. Please contact us if you have any questions. Thank you for visiting. Shipping I send a product by FEDEX or EMS. I attach the tracking number. Please bid it without worrying ? Can not be bundled. Returns Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 14 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 14 days of the receipt of the item. Please contact me first for return before you ship it back to me. The postage of the returned goods is a buyer burden. International Buyers Please Note : Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Tone arm fidelity-research FR-64S PHONO cable etc. included Lifter oil refilled Description Condition: Used Tone arm fidelity-research FR-64S PHONO cable etc. included Lifter oil refilled Audio Station fidelity-research FR-64S Tone arm with cable etc. This tone arm is made of stainless steel, which is three times stronger than aluminium alloys, to reduce vibration. Designed for ease of use with a wide range of cartridge balancing. It is also designed for ease of use, with a wide range of cartridge balancing capability. This is a very popular tone arm that is said to have enthusiasts all over the world. Condition: Each part has been polished/cleaned. There are some minor scratches. The overall condition is good, with no noticeable scratches and a glossy finish. There are no major damages to the accessories such as cables. It is in good condition overall. Considering the age of the product, we judge it to be in good condition. This is a used product that has been used for a number of years. Please bid with the understanding that there may be scratches, dullness and a sense of use associated with age and use. The criteria for judgment regarding the condition check column are The selection is made by our staff based on a certain standard of our company which deals with vintage audio. There is a possibility that there is a difference with the standard of the customer because there is an individual difference in the way of feeling of the state. Please check the images carefully and make your own judgement. We are happy to answer any questions you may have about the condition of the product, so please feel free to contact us. Operation: Good operation. We have checked the operation with our equipment. Output from both channels. The lifters descent speed (oil replenished). Adjustment points and operating feel. Height adjustment, etc. No problems with operation. Product details Manufacturer: fidelity-research Model number: FR-64S Accessories Standard weights Lateral weights Inside force weight (small) Mounting nut/washer PHONO cable Instruction manual (copy) Template (copy) Payment Please pay within 5 days after the auction closed. Shipping Only residents of the purchasing area are eligible to make purchases. If you really want the product and are not a resident, please contact us separately for assistanceTo save on shipping costs, foldable clothes and bags may be shipped folded. Please understand this. Returns Returns are free of charge, and refunds will be processed through eBay. However, please note that returns due to size or specification differences on the buyers end will not be accepted under any circumstances. Each brand has its own size and specification characteristics. For example, EU sizes or measurements in centimeters may vary slightly depending on the brand. International Buyers - Please Note: Import duties, taxes, and additional charges are not covered within the listed item price or shipping fees. These expenses fall under the responsibility of the purchaser.Before engaging in any bidding or purchasing activity, its advisable to consult with your countrys customs office to ascertain the potential costs involved.Typically, these additional charges are collected by the shipping company upon delivery or during item retrieval. Its crucial to distinguish these charges from supplementary shipping fees to avoid confusion.Adherence to governmental regulations prohibits the undervaluation of merchandise or mislabeling items as gifts. All products and shipments originate from Japan. In cases where specific details are not provided, the standard voltage for electrical appliances is typically AC100V. For instance, consider the voltage disparity between Japan and the United States, where the standard voltage diverges to AC200V. This discrepancy underscores the necessity of employing a voltage transformer to mitigate the risk of electrical malfunctions. Therefore, ensuring compatibility with electrical specifications is imperative for seamless functionality and longevity of your appliances.

FIDELITY-RESEARCH FR-64 TONEARM BLACK LIMITED VERSION SHELL/CABLE ETC EXCELLENT Description ?? Condition: Used Please confirm the condition by reviewing the images carefully. ?? FIDELITY-RESEARCH FR-64 BLACK LIMITED VERSION TONE ARM SHELL/CABLE ETC. INCLUDED THE FR-64 TONE ARM IN A BLACK COLOR WAS SOLD AS A LIMITED EDITION. WITH VERY FEW PRODUCED, IT IS A HIGHLY RARE ITEM. CONDITION: EACH PART HAS BEEN POLISHED/CLEANED. THE ARM HAS NO NOTICEABLE DAMAGE AND RETAINS A GOOD SHINE, INDICATING IT IS IN EXCELLENT CONDITION. THE INCLUDED SHELL/CABLE AND OTHER ACCESSORIES ALSO SHOW NO SIGNIFICANT WEAR. OVERALL CONDITION: THE ITEM IS IN GOOD CONDITION CONSIDERING ITS AGE. WE HAVE JUDGED IT TO BE A QUALITY PRODUCT. PLEASE NOTE THAT THIS IS A USED ITEM WITH SIGNS OF WEAR AND TEAR DUE TO AGE AND USAGE. WE ASK THAT YOU BID WITH AN UNDERSTANDING OF THESE ASPECTS. THE CONDITION ASSESSMENT IS BASED ON OUR COMPANY’S STANDARD FOR VINTAGE AUDIO EQUIPMENT. PLEASE BE AWARE THAT INDIVIDUAL PERCEPTIONS OF CONDITION MAY VARY, SO WE ENCOURAGE YOU TO CAREFULLY EXAMINE THE IMAGES AND MAKE YOUR OWN JUDGMENT. WE ARE ALSO HAPPY TO ANSWER ANY QUESTIONS YOU MAY HAVE REGARDING THE CONDITION. OPERATION: OPERATION IS EXCELLENT. WE HAVE CONFIRMED OPERATION USING OUR COMPANYS EQUIPMENT: OUTPUT FROM BOTH CHANNELS LIFTER DESCENT SPEED (OIL REPLENISHED) FUNCTION OF ALL ADJUSTMENT POINTS AND OPERATION HEIGHT ADJUSTMENT, ETC. THERE ARE NO OPERATIONAL ISSUES. WE CONDUCT THOROUGH CHECKS OF OUR PRODUCTS, BUT IF AN INITIAL OPERATIONAL FAILURE OCCURS, WE OFFER FREE REPAIR OR REFUND WITHIN ONE WEEK OF RECEIPT. PLEASE REST ASSURED THAT IF THERE IS AN OPERATIONAL FAILURE, WE WILL COVER THE RETURN SHIPPING COSTS. FOR RETURNS DUE TO REASONS OTHER THAN INITIAL OPERATIONAL FAILURE, PLEASE NOTE THAT THE BUYER WILL BE RESPONSIBLE FOR RETURN SHIPPING COSTS. AFTER RECEIVING THE RETURNED ITEM, WE WILL CHECK THE CONDITION AND ISSUE A REFUND. PRODUCT CONTENT: MANUFACTURER: FIDELITY-RESEARCH MODEL NUMBER: FR-64 BLACK INCLUDED ACCESSORIES: MAIN WEIGHT LATERAL WEIGHT INSIDE FORCE CANCELLER WEIGHT (SMALL) HEADSHELL (FR-S/3) MOUNTING NUTS/WASHERS PHONO CABLE (FR) USER MANUAL (COPY FOR FR-64) TEMPLATE (COPY FOR FR-64) ?? Please feel free to ask any questions. We will respond within 48 hours. The product description may use automatic translation by AI. There may be some minor translation errors or unnatural parts. If any questions arise due to this, please be sure to ask before making a purchase. We will make every effort to address any questions before the purchase. Shipping ?? Items would generally be dispatched within 6 working days. ?? Most items will be shipped using FeDex, DHL or UPS which is reliable and arrives quickly. ?? Please note that for special items, or depending on the destination country, different shipping methods may be used. ?? Depending on the country, certain items such as watches and sunglasses may experience delays during customs clearance. Please be aware of this in advance. ?? As liquids are difficult to export, ink will not be included with pens, etc. Even if there are ink bottles in the images, the contents will be removed before shipping. International Buyers - Please Note: ?? Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. ?? Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. ?? These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?? The customs declaration amount will be based on the selling price on eBay. It is illegal to underdeclare the declared amount, a practice commonly referred to as undervaluing, so it must not be done under any circumstances. Similarly, declaring items as gifts is also not permitted.

DiscriptionFidelity-Research FRT-4 Step-up Transformer MC Cartridge donut type USED Japan Fidelity Research Fidelity Research FRT-4 FRs unique doughnut/ring type toroidal transformerFour transformers for each impedance. Double-layered steel and aluminum alloy housing. The FRT-4 is a very popular MC step-up transformer, and is a very extravagant model that incorporates four of FRs unique doughnut-shaped/ring-core transformers to perfectly match the impedance of various cartridges. Please feel free to contact us if you have any question. Please check the condition of the product with the photo.All items are what you see in the photos. I am selling different colors of the same product and selling as a set, so please take a look at my store. ShippingWe usually ship within 10 business days of receiving cleared payment. We ship using FedEx, DHL, UPS, Japan Post. If you wish to specify a shipping company, please purchase the following links at the same time. Some items may not be shipped by the specified method. In that case, we will refund your money.FedEx DHL UPS Japan Post Combine shipping welcome!! If you wish to combine it, please contact us before payment. Even items with free shipping may incur an additional cost, called a remote area fee depending on the region.(This is especially common in Australia.) In such cases, please note that it will cost about $20-$30 in addition to the price of the item.*Return* Under eBays return policy, we accept free returns for 60 days. If you dont like it, you can return it, so buy with confidence. International Buyers - Please Note:Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. Other If you have any questions, please feel free to contact us. I also have a variety of other Japanese items for sale, please see my profile. Visit my store I am a beginner, but I try to be polite. Please feel free to contact me if you have any requests. I will surely find it for you.

fidelity-research FR-54 Static Balance Type Tonearm Pickup Arm Vintage Audio #3 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels Lifter descent speed (oil replenished) Each adjustment point, operation feeling Height adjustment, etc. Polished and cleaned for each part. The appearance is a beautiful product without any noticeable scratches. Please refer to the photo. *All accessories are shown in the photos.*Turntables and other equipment shown in the photo, are for presentation purposes only and are not included in the product. Specifications Overall length: 335mmEffective length: 245mmOverhang: 15mmNeedle pressure application range: 0 to 3g (0.25g step)Arm height adjustment: 24-65mmCompatible cartridge weight: (including shell) 15-32gTracking error: +2.25° to -1.35Mounting hole diameter: 21mmAttached shell weight? FR-S/2:12g Accessories Main weightInside force canceller weight (already installed)Head shell (fidelity-research)PHONO cable (fidelity-research)Nuts and washersInstruction manual (original)(Japanese)Template (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

fidelity-research RS-141 High-density Fabricated Highly Rigid Aluminum Headshell Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Specifications Weight : 14g Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

fidelity-research FR FR-7f Shell Integrated Stereo Moving Coil MC Cartridge #4 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance is a beautiful product without any noticeable scratches. The cantilever is not broken or bent. Stylus tip and damper are in good condition. Original case included. Overview Shell-integrated MC cartridge, an improved version of the FR-7. It uses a unique push-pull power generation system with a 2-magnet, 4-pole magnetic circuit.This system generates power at four points, so that a large output voltage can be obtained even with a low-impedance coil. In addition, although the general system generates canceled current in the generator circuit, the FR-7fs magnetic circuit can generate positive output in the opposite direction even in the region where canceled current occurs. This improves the phase and crosstalk characteristics as well as the electrical conversion efficiency, resulting in higher output power. A samarium-cobalt magnet is used as the magnetic circuit material. These magnets have a higher coercive force and are less likely to self-demagnetize than ordinary alnico magnets, thus maintaining the initial characteristics of the magnetic circuit for a long period of time. The generator coil uses a completely air-core coil without a winding frame, which prevents unwanted magnetic materials from moving within the generator field and fundamentally eliminates distortion of the reproduced signal. The effective mass of the resonator is also reduced to about 2/3, resulting in a smaller mechanical impedance in the high frequency range. For the needle tip, a unique refined-contact needle made of solid 0.15 mm square diamond is used.The new method of using a refined contact needle combines the advantages of a line-contact needle with those of an oval needle, making it less susceptible to adverse effects (noise, etc.) caused by the warping of the disc and dust in the sound groove. The new needle is less susceptible to the adverse effects (e.g., noise) of warpage and dust in the sound grooves of a disc, and generates very little scratch and surface noise, resulting in a clear and uninterrupted playback sound. A special aluminum alloy cantilever is used for the cantilever.This is a straight cantilever made of a highly corrosion-resistant special aluminum alloy with optimum heat-hardening treatment (ceramic treatment) to minimize the moment of inertia and deflection during high-speed movement. The leading part of the string holder extends to the front of damper B, which makes the fulcrum position clearer. This clarifies the cantilever vibration fulcrum position and minimizes the cantilever vibration distance variation at each frequency.In addition, the string wire used to tension the cantilever is made of a material with a very high spring coefficient and little change over time, which contributes to the improvement of the square wave characteristics. A dual damper system is employed, with two layers of dampers with different rubber coefficients to effectively dump the mid-high and mid-low frequencies of the vibration frequency respectively, enabling ideal tracing over the entire reproduction frequency range.In addition, the rubber coefficients of damper A and B are different to reduce the total effect of temperature on tracing performance, mechanical impedance characteristics, and reproduced sound. To solve the problem of coil lead wires vibrating with the cantilever, coil lead wires are inserted and crimped between dampers A and B to eliminate unwanted power generation by the lead wires. The head shell is shaped to completely remove dead space that could cause parasitic vibration, which is detrimental to sound quality. The shell is made of a special aluminum alloy, which is impact-machined (cold-forged) to further increase rigidity and prevent split resonance. The cartridge body is made of epoxy resin, which was selected through careful audibility tests. To improve the lack of strength caused by rattling between the arm and connector section, a special stainless steel locking plate is used in place of the conventional guide pin. This allows for a more integrated connection with the arm, and the level can be maintained correctly. Specifications Type: MC CartridgeOutput voltage 0.15mV(3.54cm/sec., 45?)0.2mV(5cm/sec., 45?)Output power 2x10-8W(5cm/sec.45?)Needle pressure 2g to 3gCoil impedance 2?Load impedance 3?Playback frequency range 10Hz to 45kHzChannel balance 1dB(1kHz)Channel separation -28dB(1kHz)Compliance 7x10-6cm/dyne(100Hz, 20°C)Needle tip 0.15mm square refined-contact solid diamond needleWeight 30g Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

fidelity-research FR FR-6E Stereo Moving Magnet MM Cartridge Phono Pick-up Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance is a beautiful product without any noticeable scratches. w/ Headshell (FR-S2) Specifications MM typeOutput voltage 7mV(5cm/sec)Needle pressure 2~2.5gPlayback frequency bandwidth 20-20,000HzChannel separation 24dB/1kHzCompliance 10×10-6cm/dyneLoad resistance 50k??Impedance 0.8k?/1kHz?Needle tip 0.2 x 0.8milWeight 5.5g Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

FR fidelity-research FR-64S Dynamic Balanced Stainless Steel Tonearm Vintage #6 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished).Each adjustment point, operation feeling. Height adjustment, etc. Polished and cleaned for each part. The appearance is a beautiful product without any noticeable scratches.Please refer to the photo. Specifications Overall length: 325mmEffective length: 245mmOverhang: 15mmNeedle pressure application range: 0 to 5 gArm height adjustment: 25-60mmCompatible cartridge weight: (including shell) 17-44g, 7-31g (using W-170)Tracking error: + 2.25 ° to -1.35 ° (inner circumference 0)Mounting hole diameter: 31?mm Accessories Standard WeightsLateral weightsInside force weight (small)Mounting nut/washerPHONO cableInstruction Manual (copy) (Japanese)Template (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

fidelity-research FR FR-64 Dynamic Balance Type Tonearm Pickup Arm Vintage Audio #8 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels Lifter descent speed (oil replenished) Each adjustment point, operation feeling Height adjustment, etc. Polished and cleaned for each part.The appearance is a beautiful product without any noticeable scratches. Please refer to the photo. *There are no accessories other than those shown in the photo.*Turntables and other equipment shown in the photo, are for presentation purposes only and are not included in the product. Specifications Overall length: 311mmEffective length: 245mmOverhang: 15mmNeedle pressure application range: 0 to 3gArm height adjustment: 27 to 55mmCompatible cartridge weight (including shell): 13 to 24gMounting hole diameter?28mm Accessories Main weight (integrated weight shaft)Lateral weightsInside force canceller weightMounting nut/washerPHONO cable (FR) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

fidelity-research FR-64 Dynamic Balance Type Tonearm Pickup Arm Audio w/Box #4 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels Lifter descent speed (oil replenished) Each adjustment point, operation feeling Height adjustment, etc. Polished and cleaned for each part. There are some minor scratches and dullness in some parts, but overall, it is good with no noticeable flaws. Please refer to the photo. *There are no accessories other than those shown in the photo.*Turntables and other equipment shown in the photo, are for presentation purposes only and are not included in the product. Specifications Overall length: 325mmEffective length: 245mmOverhang: 15mmNeedle pressure application range: 0 to 5gArm height adjustment: 25 to 60mmCompatible cartridge weight: (including shell) 11-32g, 17-44g (with W-210)Tracking error: +2.25° to -1.35° (inner circumference 0)Mounting hole diameter: 31?mm Accessories Standard WeightsLateral weightsInside force weight x 2 (large/small)Head shell/lead wire (FR-S/3)Mounting nut/washerPHONO cableLead plateHexagonal wrenchCartridge fixing screwsWrenchInstruction Manual (original) (Japanese)Template (original)Original box *The original box is damaged due to age. Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

[Product] Fidelity-Research FR-54 Tone Arm Sub Weight 37g Description Condition: Used [Product] Fidelity-Research FR-54 Tone Arm Sub Weight 37g For Sale: Custom Sub-Weight for Fidelity-Research FR-54 Tonearm, 37g Description This is a custom-made 37g sub-weight designed for the Fidelity-Research FR-54 tonearm. It is intended to be used to achieve zero balance when the combined weight of the cartridge and shell is too heavy. Specifications Size: The inner diameter matches the outer diameter of the tonearm shaft. Please refer to the image for specific dimensions. Material: Sub-weight: Stainless steel (SUS304) Securing piece: Brass (C3604) Black color: PLA (a type of plastic) Note: Non-magnetic materials suitable for audio components are used. Please verify the material of any components without material markings. Condition Please refer to the images. As this is a handmade product, there may be machine marks or chuck marks. Please note that the original inner O-ring and felt are not included. How to Use When the combined weight of the cartridge and shell is heavy and zero balance cannot be achieved, place this sub-weight behind the main weight and adjust the balance. Please measure the tracking force with a precision gauge. This item expands the range of available cartridges and shells. Please note that zero balance is not guaranteed in all cases. Included Items Weight Securing piece (M3 screw) Black color (for decoration) Note The tonearm and measuring instrument shown in the reference image are not included. This is a handmade product, and there may be slight variations in appearance. Please ensure that the material of any additional components you may use is suitable for audio equipment. Payment Please pay within 5 days after the auction closed. Shipping Only residents of the purchasing area are eligible to make purchases. If you really want the product and are not a resident, please contact us separately for assistanceTo save on shipping costs, foldable clothes and bags may be shipped folded. Please understand this. Returns Returns are free of charge, and refunds will be processed through eBay. However, please note that returns due to size or specification differences on the buyers end will not be accepted under any circumstances. Each brand has its own size and specification characteristics. For example, EU sizes or measurements in centimeters may vary slightly depending on the brand. International Buyers - Please Note: Import duties, taxes, and additional charges are not covered within the listed item price or shipping fees. These expenses fall under the responsibility of the purchaser.Before engaging in any bidding or purchasing activity, its advisable to consult with your countrys customs office to ascertain the potential costs involved.Typically, these additional charges are collected by the shipping company upon delivery or during item retrieval. Its crucial to distinguish these charges from supplementary shipping fees to avoid confusion.Adherence to governmental regulations prohibits the undervaluation of merchandise or mislabeling items as gifts. All products and shipments originate from Japan. In cases where specific details are not provided, the standard voltage for electrical appliances is typically AC100V. For instance, consider the voltage disparity between Japan and the United States, where the standard voltage diverges to AC200V. This discrepancy underscores the necessity of employing a voltage transformer to mitigate the risk of electrical malfunctions. Therefore, ensuring compatibility with electrical specifications is imperative for seamless functionality and longevity of your appliances.

FIDELITY-RESEARCH FR-7F CARTRIDGE MC TYPE NEEDLE COVER INCLUDED TURNTABLE PARTS Description ?? Condition: Used Please confirm the condition by reviewing the images carefully. ?? Fidelity-Research FR-7f MC Cartridge with Stylus Cover Condition: The cartridge is in excellent condition with no noticeable scratches and a shiny appearance. The cantilever shows no signs of bending or damage. The stylus tip and damper are also in good condition, and the stylus cover is free from major damage. Overall, the cartridge is in a clean state and is considered to be in very good condition given its age. Please note that this is a used item, and some minor scratches, scuffs, or signs of use may be present. Please bid with this in mind. The condition of the item has been assessed based on our company’s standards for vintage audio equipment. Individual perceptions of condition may vary, so please review the images carefully and make your own judgment. Feel free to contact us with any questions about the condition. Operation: The cartridge has been tested with an appropriate tracking force of 2g to 3g. It performs well with both channels producing good sound. There are no issues with its operation. We conduct thorough checks, but if there are any initial functional problems, we offer free repair or a refund within one week of receipt. If there is a defect, return shipping will be covered by us. For returns other than initial defects, the return shipping cost will be the responsibility of the buyer. We will inspect the returned item and issue a refund after confirming its condition. Product Details: Manufacturer: Fidelity-Research Model: FR-7f Tracking Force: 2g to 3g Product Details: Link to product details Included: Stylus Cover Note: The photo includes everything that is part of the sale. Please review the images to ensure you understand what is included. ?? Please feel free to ask any questions. We will respond within 48 hours. The product description may use automatic translation by AI. There may be some minor translation errors or unnatural parts. If any questions arise due to this, please be sure to ask before making a purchase. We will make every effort to address any questions before the purchase. Shipping ?? Items would generally be dispatched within 6 working days. ?? Most items will be shipped using FeDex, DHL or UPS which is reliable and arrives quickly. ?? Please note that for special items, or depending on the destination country, different shipping methods may be used. ?? Depending on the country, certain items such as watches and sunglasses may experience delays during customs clearance. Please be aware of this in advance. ?? As liquids are difficult to export, ink will not be included with pens, etc. Even if there are ink bottles in the images, the contents will be removed before shipping. International Buyers - Please Note: ?? Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. ?? Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. ?? These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?? The customs declaration amount will be based on the selling price on eBay. It is illegal to underdeclare the declared amount, a practice commonly referred to as undervaluing, so it must not be done under any circumstances. Similarly, declaring items as gifts is also not permitted.

Thank you for looking at my shop!?Hope you have the best shopping! ! ??CONDITION LEVEL?? New-Unused-Excellent-Very Good-Good-Acceptable-Junk Condition:Good Operation: OK ? Operation: Good We have confirmed that it works using our own equipment. ?Output from both channels ?Lifter descent speed (oil refilled) ?Each adjustment, operation feel ?Height adjustment, etc. No problems with operation. Appearance: Beautiful ? Condition: Each part has been polished/cleaned. The arm is shiny with no noticeable scratches and in good condition. The accessories such as cables also show no major damage. ????PAYMENTS???? ?We accept PayPal and all major Debit / Credit Cards. ?We can only ship your item after your payment clears. ?We ship within 10 days of payment. ????CHECKOUT???? ?Please check your address before paying because we can ONLY ship to addresses that are entered before placing the order. ?We cannot change an address after the order has already been placed. ????SHIPPING???? ?Packages:Box or envelope and Bubble wrup ?Packages usually leave our warehouse within 10 days of payment. ?We provide valid Tracking Numbers for all orders. ????INTERNATIONAL PACKAGES???? ?All our international packages ship under the Fedex or Japan Post or DHL. ????CUSTOMER SERVICE???? ?If you have any questions or issues, we are at your service. ?You can email us anytime through eBay messages. ??RETURN INFORMATION?? ?We offer a standard FREE 30 days refund or exchange policy. ?Item must be returned in original condition in order to receive a full refund. ????Customs duty???? ?Import duties, taxes, and charges are not included in the item price or shipping cost. ?These charges are the buyers responsibility. ?Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. ?We cant not reply gifts or unreasonable requests such as declared amount.

????Including & Condition Details: As shown in photos. ????Shipping: FedEx fidelity-research FR-64SThis Tonearm uses stainless steel, which is three times stronger than the aluminum alloy that comes with the cable, to reduce vibration. It has been designed with utmost care in terms of ease of use, allowing cartridge balance to be achieved over a wide range. This is a very popular tonearm that is said to have enthusiasts all over the world. ?ConditionEach part has been polished/cleaned.There is no noticeable damage and the arm is shiny and in very good condition. There is no major damage to the cables or other accessories. It is in very good overall condition. Considering its age, we judge it to be a very good product. ?OperationThe operation has been confirmed using our equipment.?There is no problem with the operation, such as the output from both channels, the lowering speed of the lifter (oil has been refilled), each adjustment point, operational feel, and height adjustment. ?Product ContentsManufacturer: fidelity-researchModel number: FR-64S ?Accessories?Standard weight?Lateral weight?Inside force weight (small)?Mounting nut/washer?PHONO cable?Instruction manual (original)?Template (copy) ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Fidelity-Research FR-S/2 Aluminum Diecast Headshell Payment PayPal ONLY. Please pay within 5 days after auction is finished. Shipping We ONLY ship to buyers Paypal registered address. ReturnsItems that are faulty beyond the description given on our auction site should be returned for a full refund.Please contact us by e-mail if items delivered are faulty. However, please send the item back to us. About usOur product is 100% authentic! We dispatch items from Japan. We provide our goods and services based on our motto “Your complete satisfaction is our ultimate goal”. Therefore, please rest assured and make your bid with ease. Please Note International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior.

Fidelity-Research FR-S/3 Aluminum Diecast Headshell Payment PayPal ONLY. Please pay within 5 days after auction is finished. Shipping We ONLY ship to buyers Paypal registered address. ReturnsItems that are faulty beyond the description given on our auction site should be returned for a full refund.Please contact us by e-mail if items delivered are faulty. However, please send the item back to us. About usOur product is 100% authentic! We dispatch items from Japan. We provide our goods and services based on our motto “Your complete satisfaction is our ultimate goal”. Therefore, please rest assured and make your bid with ease. Please Note International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior.

listing many other similar items! >>>Visit StoreDescription Condition: Used Brand: Fidelity-Research FR-54 / Tonearm for Record Player/Turntable Fidelity-Research FR-54It is a beautiful item with no noticeable scratches.No tail end logoIt has a simple design that is easy to handle, with no sensitive parts, and the sound is light and clear, and the sound is good (my impression).The arm lifter has been refilled with oil and descends slowly with a sense of luxury.Includes phono cable and instruction manual (copy)There are dullness and scratches on the metal due to storage, which are difficult to see in the image.The item you will receive will be the one in image 9.Props for photography such as installation stand are not included. Please check the picture for the condition of the product. Please refrain from nervous people and those who seek perfection.I am waiting for a question by a message?There may be an error in the Item specifics. ?Please give priority to photos and descriptions. Please read the full item description and contact us with any questions you may have prior to purchasing.Please let me know if there are any other products you want. Even if the condition is Unused, it has been handed to someone once, so we list it as a used item. Please purchase only if you understand the second hand product. The items we are selling are used in Japan. You may need a transformer for use in your country.Payment Please pay within 5 days after auction is finished.Shipping We ship to world wide for free by SAL(With tracking number). All items will be carefully packed and shipped to you directly from Japan.International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Provided by HARU

listing many other similar items! >>>Visit StoreDescription Condition: Used Brand: M3742 Fidelity-Research FR-1MK2 MC type cartridge for Record Player/Turntable M3742 Fidelity-Research FR-1MK2 MC type cartridge with shellThe listing is for the main unit only.Please judge from the photo. There are scratches and dirt.?Operation confirmedAccessories: None Please check the picture for the condition of the product. Please refrain from nervous people and those who seek perfection.I am waiting for a question by a message?There may be an error in the Item specifics. ?Please give priority to photos and descriptions. Please read the full item description and contact us with any questions you may have prior to purchasing.Please let me know if there are any other products you want. Even if the condition is Unused, it has been handed to someone once, so we list it as a used item. Please purchase only if you understand the second hand product. The items we are selling are used in Japan. You may need a transformer for use in your country.Payment Please pay within 5 days after auction is finished.Shipping We ship to world wide for free by SAL(With tracking number). All items will be carefully packed and shipped to you directly from Japan.International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Provided by HARU

Description*Please see the photos and buy only if you are satisfied with the item.Fidelity-Research Fidelity-Research TOROIDAL TRANSFORMER FRT-4 MC step-up transformer. We are unable to check the operation, so please treat as junk, 3N.If you have any concerns about the product, please contact us directly.ShippingItem will be shipped via FEDEX.Please allow 5 business days for handling time.Shipping from Japan.It takes approximately 4 to 7 days for the product to arrive it is shipped.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Thank you for your understanding.

Fidelity-Research FR-64S Tonearm Used DescriptionWe have not been able to confirm the operation of the system because we do not have the equipment or environment to check it in detail. PaymentPlease pay within 3days after your purchase.Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 3-7 business days. (except for Saturday, Sunday and national holiday in JAPAN ) Weekends are not available because FedEx or DHL are closedInternational Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.