Emotiva XPA-5 Gen2 5 Channel Power Amplifier This amplifier is in good condition and works flawlessly. It comes with its original packaging, user manual, and power cord. There are a few very minor marks on the R rear corner of the amp as shown in the pictures though its nothing that impacts the performance of the amp at all. Do not miss out on your chance to own this incredible amplifier! Specifications Topology: Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 5. Power Output (rated power; THD < .1%): 200 watts per channel; all channels driven; into 8 Ohms. 300 watts per channel; all channels driven; into 4 Ohms. Rated Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz + / - 0.075 dB. Minimum Recommended Load Impedance: 4 Ohms; which equals one 4 Ohm load or two paralleled 8 Ohm loads. Frequency Response: 10 Hz to 80 kHz (+ 0 / - 1.5 dB). THD + noise: < 0.016%. Signal to Noise Ratio (8 Ohm load): > 95 dB at 1 watt (A-weighted). > 119 dB at rated power (A-weighted). Damping Factor (8 Ohm load): > 500. Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts. Power Supply: 60,000 uF of storage capacitance. 1200 VA heavy duty toroidal transformer Input Sensitivity (for rated power; 8 Ohm load): 1.8 V. Gain: 29 dB. Input Connections: Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable. Input Impedance: 33 kohms (balanced). 23.5 kohms (unbalanced). Trigger: Trigger Input: 5 - 20 V (AC or DC); <10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 100 mA. Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). Front Panel Controls and Indicators: Standby; push button (halo ring changes color to indicate Standby or On). Status LEDs; one per channel; blue. Status LEDs change to red to indicate a fault condition. Rear Panel Controls: AC Power switch; rocker switch (switches AC main power). Status LEDs switch; disables front panel Status LEDs and dims Standby button halo. Input selector switches (one per channel); metal toggle switches; select between balanced and unbalanced inputs. Protection: The XPA-5 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. Dimensions: 17” wide x 7.75” high x 19” deep; unboxed (includes feet and binding posts). 23-1/2” wide x 12” high x 24-3/4” deep (boxed). Weight: 70.4 pounds unboxed (81.5 pounds boxed). Check out my other listings. Feel free to ask any questions.I ship items only to buyers with signature required on items above $750.NOTE: Returns not accepted.

Circuit TopologyThe XPA-5 Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection.The XPA-5 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).Audio SpecificationsThe XPA-5 Gen3 features five of our High-Powered Single Channel Modules.Audio Specifications (Five High-Powered Single Channel Modules):Power Output: 300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven. 550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven. 300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven. 490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven. 250 watts RMS/channel; THD<0.1%; 8 Ohms; ALL FIVE channels driven.Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB.THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms.Signal to Noise Ratio (8 Ohm load): > 117 dB; ref FTC rated power; unbalanced input (A-weighted). > 91 dB; ref 1 watt; unbalanced input (A-weighted).Minimum Recommended Load Impedance (per channel): 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads).Damping Factor (8 Ohm load): > 500.Input Sensitivity (for rated power; 8 Ohm load): 1.5 V.Gain: 29 dB.Maximum Power Consumption: 2,000 watts. Note: The values shown refer to the amount of power the amplifier would consume while playing test tones continuously, on all channels, at full power, into a load bank. Therefore they are not at all characteristic of what you would expect when playing music or the sound track from a movie. Normal audio signals are dynamic, so the amount of power they require from second to second varies widely, and the average is far lower than this. With normal content, even playing very loudly, one of our amplifiers will consume far less power than indicated in the chart, so these values should not be considered to be a circuit requirement for normal operation.Input Impedance: 33 kOhms (balanced). 23.5 kOhms (unbalanced).Input And Output ConnectionsInput Connections (High-Powered Single Channel Modules): Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable.Input Connections (Stereo Modules): 2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable.Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts.Trigger: Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 120 mA.Power RequirementsBetween 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).Front panel Controls and IndicatorsStandby: push button (halo ring changes color to indicate Standby or On).Status LEDs: one per channel; blue. Status LEDs change to red to indicate a fault condition.Rear Panel ControlsAC Power switch: rocker switch (switches AC main power).Status LEDs switch: disables front panel Status LEDs and dims Standby button halo.Input selector switches (one per channel): metal toggle switches; select between balanced and unbalanced inputs.Circuit Breaker: press button to reset circuit breaker.ProtectionThe XPA Gen3 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.MechanicalDimensions: 17” wide x 8” high x 19” deep (unboxed; including feet). 17” wide x 7” high x 19” deep (unboxed; without feet). 24-1/2” wide x 12” high x 24-3/4” deep (boxed).Weight: 46 lbs (unboxed). 51 lbs (boxed).

Purchased as refurbished unit directly from Emotiva. 1 owner since. Selling because of an upgrade. Plenty of power for almost all setups. Lightly used as a HT setup in a small apartment living room so never really pushed.Class A/B design with short signal path; Triple Darlington with Toshiba output stages; DualDifferential input; Balanced (XLR) and Un-balanced (RCA);Specifications:5 – independent mono blocks @ 200 wpc into 8 ohms; 350 wpc into 4 ohmsClass A/B design with short signal pathTriple Darlington with Toshiba output stagesDual Differential inputBalanced (XLR) and Un-balanced (RCA)Audiophile quality 5 way binding postTHD+N at rated power output: 0.007%S/N ratio: >100db10 to 120Khz (-3db) and 20 to 20 (with less than .15db deviation)32db gain structure1600VA toroidal transformer60,000uF secondary capacitance70 pounds17” W x 7.75” H x 19” DNo Box. Local pick up in 91677 preferred

This powerful Emotiva XPA-5 Gen 2 amplifier is a must-have for any audio enthusiast. With 5 channels and 300 watts at 4 ohms per channel, this amplifier delivers exceptional sound quality. It is compatible with a variety of audio systems and is guaranteed to enhance your listening experience. This amplifier is in good working condition, and has been thoroughly tested to ensure optimal performance. Upgrade your audio setup today with the Emotiva XPA-5 Gen 2 amplifier. XPA 5 Gen 2 specs: Number of channels:5 Topology:fully discrete, highly optimized dual differential, high current, short signal path Class A/B with premium components throughout Power output (all channels driven): 300 watts RMS @ 4 ohm (0.1% THD) 200 watts RMS @ 8 ohm (0.05% THD) Rated power bandwidth:20 Hz to 20 kHz +/- .075 dB Broadband Frequency response:5 Hz to 100 kHz, +0 -2dB Amplifier gain:29 dB Signal to Noise Ratio: 1 watt: > 95 dB Full power: > 119 dB Input impedance: unbalanced: 23.5 kohms balanced: 33 kohms Power supply:1,200VA toroidal transformer with 60,000uF storage capacitance Dimensions: unboxed: 17 wide x 7 3/4 high x 19 deep boxed: 23 1/2 wide x 12 high x 24 3/4 deep Weight:70.4 lbs Shows min wear if any. No factory. Includes power cord and manual. This thing is heavy! 70lbs Local pick up in Central Arkansas. Bring equipment needed to demo if you need a demo before purchase. Thanks Smoke free home.

I switched to a single 11 channel amp instead of the individual 5 channel amps and a 3 channel for my 11 channel theater. So now I am selling the XPA-5s. Awesome amplifiers. This listing is for one Emotiva XPA-5 (Gen 1) amplifier. It has the silver bars on the front but I do have one or two sets of the black bars, let me know if you want them, I will throw them in for free if I can find them. This will ship in the original box.

Emotiva XPA-5 Gen 1- 5 Channel Amp - only 4 Channels Working. Condition is Used. Shipped with USPS Ground Advantage.

I switched to a single 11 channel amp instead of the individual 5 channel amps and a 3 channel for my 11 channel theater. So now I am selling the XPA-5s. Awesome amplifiers. This listing is for one Emotiva XPA-5 (Gen 1) amplifier. It has the silver bars on the front but I do have one or two sets of the black bars, let me know if you want them, I will throw them in for free if I can find them. This will ship in the original box.

Selling a Gen 2 Emotiva XPA 5. Over 200 watts per channel with all 5 channels driven. This thing is a beast and weighs 80+ lbs. Its in very good condition with a few small blemishes on the side and top. No dents or anything, just scuffs. All 5 channels work perfectly and deliver such effortless power. It will be shipped in the original double boxes from Emotiva, and I try to ship everything within 1 business day. Thanks for looking!

Here is the AI Bot description:Amplify your sound with the Emotiva XPA-5 Power Amplifier. This 5-channel amplifier provides high-quality audio for your music collection. Its perfect for home audio, TV, video, and home audio applications. The XPA-5 is a Gen 1-5 channel power amplifier that has been tested and barely used. With its brand name, Emotiva, you can trust that this power amplifier will provide you with clear and powerful sound. Its designed for audiophiles who want to enhance their listening experience. The XPA-5 is a reliable and efficient choice for those who want to upgrade their home audio system. Here is my description:1. This thing is in perfect working condition. I just tested it, all 5 channels drive with power.2. It is freakin heavy.3. It is in MINT condition. It has been hardly used. Although I was sure to use it 3 times per year to ensure working order.4. Make sure your room is sound-insulated, this thing will drive nearly any set of high-quality speakers, VERY loudly.5. Everything is in its ORIGINAL packaging. Please see the photos.6. I only ship USPS in CONTINENTAL US. No exceptions.7. It is triple-boxed, with foam factory harness plus two heavy cardboard boxes. It weighs nearly 100 LBS! (see note 2 above)8. If youd like me send the interconnects, HDMI and repeater cable I can send separately free of charge.9. Shipping is $75 but will probably cost me more! I am not a scammer, and I do not entertain any OFFERS, trades or swaps, etc. Dont waste my time. Someone will get a beautiful and high-power AMP. Congrat!! BUY WITH CONFIDENCE AND THANKS FOR LOOKING.

Purchased July 2023. Great condition with original box. 250 WPCx5, balanced and RCA inputs.

Emotiva XPA=5 Gen 1 5 channel amp in good condition. Used infrequently, going back to 2 channel. 1800 watts. Plenty of power to drive low ohm, demanding speakers. Minor scuffs, no scratches. Includes power cord. Very heavy. Will be shipped insured. Local pick up available, will invoice for purchase, less shipping charges

Selling a Gen 2 Emotiva XPA 5. Over 200 watts per channel with all 5 channels driven. This thing is a beast and weighs 80+ lbs. Its in very good condition with a few small blemishes on the side and top. No dents or anything, just scuffs. All 5 channels work perfectly and deliver such effortless power. It will be shipped in the original double boxes from Emotiva, and I try to ship everything within 1 business day. Thanks for looking!

This Emotiva XPA-5 Gen 2 amplifier is a powerful addition to your home audio system, delivering 300 watts at 4 ohms to each of its 5 channels and 200 watts at 8 ohms. It is a great investment for any music lover looking for high-quality sound. The amplifier is from the renowned brand Emotiva and is designed for use with home audio systems. It has 5 channels and a maximum output of 300 watts at 4 ohms, making it a great choice for anyone looking for a powerful amplifier. Its sleek design and excellent performance make it a great addition to any home audio setup.

Elevate your home theater experience with the Emotiva XPA-5 Gen3 5 Channel Audiophile Power Amplifier. This power amplifier delivers exceptional sound quality and power without compromising on design and functionality. With five channels, it is perfect for a complete surround sound setup and will take your movie nights to the next level.The Emotiva XPA-5 Gen3 is a top-of-the-line amplifier from a trusted brand. It is built to withstand even the most demanding audio needs and is the perfect addition to any home theater. Why settle for ordinary sound when you can have extraordinary? Invest in the Emotiva XPA-5 Gen3 and experience the power of true audiophile-grade sound. Audio Specifications (Five High-Powered Single Channel Modules): Power Output: • 300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven • 550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven • 300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven • 490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven • 250 watts RMS/channel; THD<0.1%; 8 Ohms; ALL FIVE channels driven Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB) Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms Signal to Noise Ratio (8 Ohm load): • > 117 dB; ref FTC rated power; unbalanced input (A-weighted) • > 91 dB; ref 1 watt; unbalanced input (A-weighted) Minimum Recommended Load Impedance (per channel): 4 Ohms (equals one 4 Ohm load or two paralleled 8 Ohm loads) Damping Factor (8 Ohm load): > 500 Input Sensitivity (for rated power; 8 Ohm load): 1.5 V Gain: 29 dB Maximum Power Consumption: 2,000 watts.

TESTED WORKS With Power Plug .Unit is in very good condition some scratches here and there but otherwise it’s in good working condition. BI-VOLT OF 115V/60Hz-230V/50Hz Emotiva XPA-5. Gen 1-5 Channel Power Amplifier, Tested Works Description Our SKU: EEUS006669379CA-E5TR7LN Item Brand: Emotiva Item MPN: 65465 TESTED WORKS With Power Plug .Unit is in very good condition some scratches here and there but otherwise it s in good working condition. BI-VOLT OF 115V/60Hz-230V/50Hz Please let us know if you have any questions regarding a past or future purchase. Check out our entire store for more great products and deals!! Warranty Our inventory is purchased from various different manufacturers, retailers, and 3rd party sources. We do not represent or make any claim regarding any manufacturers warranty. We do however make every possible attempt to accurately describe the inventory we sell and stand behind it. We offer a no-questions asked 30-day return policy on everything we sell if the item is in the same condition it was sold in. If you have any issues at all with your purchase please feel free to contact us, we want to make it right!! Shipping All items are carefully packed and properly protected for shipment. We use several different carriers and choose the most economical for the item and destination based on the estimated handling and transit time. Please make every attempt possible to verify that part/product being purchased is correct for your application In the event of shipping damage, item not as expected, or any other reason to desire to return the product, please feel to contact us. At this time we do not offer internation shipping. About 8TEN Industries Since 2016, 8TEN Industries has been a leading asset recovery provider supporting national retailers, brands, and manufacturers. Our 60,000 square foot processing and distribution facility located in Cass City, Michigan has allowed us to become industry leader in turning difficult problems for manufacturers into great deals for our customers. More Items Store Contact Follow Us 8TEN Industries

This Emotiva XPA-5 Gen 2 amplifier is a powerful addition to your home audio system, delivering 300 watts at 4 ohms to each of its 5 channels and 200 watts at 8 ohms. It is a great investment for any music lover looking for high-quality sound. The amplifier is from the renowned brand Emotiva and is designed for use with home audio systems. It has 5 channels and a maximum output of 300 watts at 4 ohms, making it a great choice for anyone looking for a powerful amplifier. Its sleek design and excellent performance make it a great addition to any home audio setup.