Description
Emotiva XPA-4 Gen 3 4-Channel Audiophile Multi-Channel Home Theater Power Amplifier For sale is my personal Emotiva XPA-4 Gen 3 multi channel, home theater audiophile power amp. I have had this unit since new and it has always been kept in a temperature controlled, smoke free environment. Im looking to sell as my family is expanding, and Id like to downsize some of my equipment. Please check my other listings for more Hi-Fi gear and media. This unit is equipped with 4 (four) high power mono (single channel) modules from Emotiva. It is in excellent cosmetic condition. Functionally it has been flawless. This amp runs quiet, cool / slightly warm to the touch when pushed, and remains stable throughout. It hasnt given me a problem, and has driven any speaker Ive asked it to easily. Even complex and difficult loads, at unreasonable volume levels, the amp never even went into protection mode. This is true for both stereo and all channel stereo (all four blades) usage. A true foundation for a rock solid listening experience. Please see all the photos for the actual item being sold, which will be received by the buyer. Im happy to say the amp will be shipped in its original packaging. Double boxed, including the user manual, power cable & amplifier birth certificate (seen in photos). Please be aware the packaging from Emotiva has labeling and signage on the exterior, and may be noticeable to wandering eyes. I do my best to ship items quickly upon receipt of payment. Please feel free to message me with any questions. Thanks for looking! From The Manufacturer: Configuration: 4 x High-Powered Single-Channel Modules (four module slots remain available for future expansion) Power output: 260 watts/channel RMS into 8 Ohms; all channels driven 300 watts/channel RMS into 8 Ohms; two channels driven 490 watts/channel RMS into 4 Ohms; two channels driven Circuit TopologyThe XPA-4 Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection.The XPA-4 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).Audio Specifications (Four High-Powered Single Channel Modules):Power Output:• 300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven• 550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven• 300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven• 490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven• 260 watts RMS/channel; THD<0.1%; 8 Ohms; ALL FOUR channels drivenPower Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB)Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dBTHD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 OhmsSignal to Noise Ratio (8 Ohm load):• > 117 dB; ref FTC rated power; unbalanced input (A-weighted)• > 91 dB; ref 1 watt; unbalanced input (A-weighted)Minimum Recommended Load Impedance (per channel): 4 Ohms (one 4 Ohm load or two paralleled 8 Ohm loads)Damping Factor (8 Ohm load): > 500Input Sensitivity (for rated power; 8 Ohm load): 1.5 VGain: 29 dBMaximum Power Consumption: 1,700 watts. Input Impedance:• 33 kOhms (balanced)• 23.5 kOhms (unbalanced)Input And Output ConnectionsInput Connections (High-Powered Single Channel Modules): Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable.Input Connections (Stereo Modules):2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable.Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts.Trigger:• Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.• Trigger Output: 12 VDC; can drive any load up to 120 mA.Power RequirementsBetween 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).Front Panel Controls and Indicators• Standby: push button (halo ring changes color to indicate Standby or On).• Status LEDs: one per channel; blue• Status LEDs change to red to indicate a fault conditionRear Panel Controls• AC Power switch: rocker switch (switches AC main power).• Status LEDs switch: disables front panel Status LEDs and dims Standby button halo.• Input selector switches (one per channel): metal toggle switches; select between balanced and unbalanced inputs.• Circuit Breaker: press button to reset circuit breaker.Dimensions:• 17” wide x 8” high x 19” deep (unboxed; including feet)Weight:• 42 lbs (unboxed) ProtectionThe XPA Gen3 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.
Live search