Emotiva Ultra Series UPA-2 Stereo Power Amplifier in excellent physical and perfect working condition. Includes power cord, owners manual, trigger cable and original double box packaging. Boxed and ready for shipment. Only selling because I found a newer Classe Sigma AMP2 power amp (I use to have a Classe amp in my system back in the 90s) with XLR inputs which the Emotiva doesnt have. I used the Emotiva UPA-2 amp with my McIntosh MX119 with great success for 2-channel listening. Feel free to ask any questions.

This is a creampuff, mint condition. I have enjoyed this amp for a couple years before I moved to another state. It has been in environmentally controlled storage since Dec 2019. I just dont have the space in my current house for a stereo system, which this was a part of in my previously larger home. It is in the original packaging with box and styrofoam. I unboxed it and it works as great as the day I packed it up. No scratches, dents, or any issues. Sounds great! This auction is just for the power amp, the preamp is separate auction.The last photo is a stock photo from Audioholics. Topology: Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven). Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Minimum Recommended Load Impedance: 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel). Frequency Response: 5 Hz to 80 kHz + 0 / - 2 dB. THD + N: < 0.03% Signal to Noise Ratio (8 Ohm load): 92 dB at 1 watt (A-weighted). 106 dB at rated power (A-weighted). Damping Factor (8 Ohm load): 500 Speaker Output Connections: Full-sized 5-way binding posts; one pair per channel x 2. Power Supply: 350 VA high current ultra-low noise toroidal power transformer. 40,000 uF of storage capacitance. Input sensitivity (for rated power; 8 Ohm load): 1.1 V (for full output; 8 ohms). Gain: 29 dB Input Connections: Unbalanced (RCA); one per channel. Input Impedance: 47 kOhms Trigger: Trigger Input: 5 - 20 V (AC or DC); < 10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 50 mA. Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). Front Panel Controls and Indicators: Standby; push button (changes color to indicate Standby or On). Status LEDs (one per channel); illuminate blue for normal operation or red to indicate a fault (may be disabled by rear panel Status LED switch). Rear Panel Controls: AC Power switch; rocker switch (switches AC mains power). Status LEDs switch; small slide switch on left rear (disables front panel Status LEDs). Protection: The UPA-200 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. If a fault occurs, the UPA-200 will return to Standby mode, the Standby push button will light amber, and the Status LEDs will flash red. Size: unboxed: 17 wide x 3.375 high x 16.5 deep Weight: 24 lbs (net); 32 lbs (boxed) Features: A true audiophile-quality stereo amplifier. Advanced engineering with SMD gain blocks. Wideband, short signal path, class A/B design topology. Top quality parts and construction. Real power easily drives complex loads. Heavy-duty power supply with oversized toroidal transformer. Gold plated five way binding post speaker terminals. Gold plated RCA input terminals. Classic Emotiva styling with rugged solid steel chassis. 15mm solid milled aluminum faceplate. Channel status LED’s. (which can be disabled in stealth mode). Remote trigger input and output. 115 VAC or 230 VAC with automatic detection and switching. Full protection from all common input and output fault conditions. Ship to USA only, payment due within 2 days of auctions end.

This is a creampuff, mint condition. I have enjoyed this amp for a couple years before I moved to another state. It has been in environmentally controlled storage since Dec 2019. I just dont have the space in my current house for a stereo system, which this was a part of in my previously larger home. It is in the original packaging with box and styrofoam. I unboxed it and it works as great as the day I packed it up. No scratches, dents, or any issues. Sounds great! This auction is just for the power amp, the preamp is separate auction.The last photo is a stock photo from Audioholics. Topology: Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven). Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Minimum Recommended Load Impedance: 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel). Frequency Response: 5 Hz to 80 kHz + 0 / - 2 dB. THD + N: < 0.03% Signal to Noise Ratio (8 Ohm load): 92 dB at 1 watt (A-weighted). 106 dB at rated power (A-weighted). Damping Factor (8 Ohm load): 500 Speaker Output Connections: Full-sized 5-way binding posts; one pair per channel x 2. Power Supply: 350 VA high current ultra-low noise toroidal power transformer. 40,000 uF of storage capacitance. Input sensitivity (for rated power; 8 Ohm load): 1.1 V (for full output; 8 ohms). Gain: 29 dB Input Connections: Unbalanced (RCA); one per channel. Input Impedance: 47 kOhms Trigger: Trigger Input: 5 - 20 V (AC or DC); < 10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 50 mA. Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). Front Panel Controls and Indicators: Standby; push button (changes color to indicate Standby or On). Status LEDs (one per channel); illuminate blue for normal operation or red to indicate a fault (may be disabled by rear panel Status LED switch). Rear Panel Controls: AC Power switch; rocker switch (switches AC mains power). Status LEDs switch; small slide switch on left rear (disables front panel Status LEDs). Protection: The UPA-200 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. If a fault occurs, the UPA-200 will return to Standby mode, the Standby push button will light amber, and the Status LEDs will flash red. Size: unboxed: 17 wide x 3.375 high x 16.5 deep Weight: 24 lbs (net); 32 lbs (boxed) Features: A true audiophile-quality stereo amplifier. Advanced engineering with SMD gain blocks. Wideband, short signal path, class A/B design topology. Top quality parts and construction. Real power easily drives complex loads. Heavy-duty power supply with oversized toroidal transformer. Gold plated five way binding post speaker terminals. Gold plated RCA input terminals. Classic Emotiva styling with rugged solid steel chassis. 15mm solid milled aluminum faceplate. Channel status LED’s. (which can be disabled in stealth mode). Remote trigger input and output. 115 VAC or 230 VAC with automatic detection and switching. Full protection from all common input and output fault conditions. Ship to USA only, payment due within 2 days of auctions end.

Emotiva Ultra Series Stereo Power Amplifier UPA-2 Stereo Power Amplifier. Excellent Condition. Includes Power Cord and Operation Manual.

Excellent condition very well taken care of. Comes with black and silver trim plates, power cord and original double box. Does not come with a remote. Enjoy stunning sound quality with this Emotiva UPA-200 Stereo Power Amplifier. This powerful 2-channel amplifier is designed to deliver top-notch audio performance that will satisfy even the most demanding audiophiles. With its sleek black color and compact design, this amplifier is sure to blend seamlessly into your home audio setup. The Emotiva UPA-200 is a high-quality power amplifier that is perfect for anyone who wants to take their audio experience to the next level. Whether you're a music lover or a home theater enthusiast, this amplifier delivers the power and performance you need to enjoy your favorite movies and music in the best possible way.

This is a creampuff, mint condition. I have enjoyed this amp for a couple years before I moved to another state. It has been in environmentally controlled storage since Dec 2019. I just dont have the space in my current house for a stereo system, which this was a part of in my previously larger home. It is in the original packaging with box and styrofoam. I unboxed it and it works as great as the day I packed it up. No scratches, dents, or any issues. Sounds great! This auction is just for the power amp, the preamp is separate auction.The last photo is a stock photo from Audioholics. Topology: Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven). Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Minimum Recommended Load Impedance: 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel). Frequency Response: 5 Hz to 80 kHz + 0 / - 2 dB. THD + N: < 0.03% Signal to Noise Ratio (8 Ohm load): 92 dB at 1 watt (A-weighted). 106 dB at rated power (A-weighted). Damping Factor (8 Ohm load): 500 Speaker Output Connections: Full-sized 5-way binding posts; one pair per channel x 2. Power Supply: 350 VA high current ultra-low noise toroidal power transformer. 40,000 uF of storage capacitance. Input sensitivity (for rated power; 8 Ohm load): 1.1 V (for full output; 8 ohms). Gain: 29 dB Input Connections: Unbalanced (RCA); one per channel. Input Impedance: 47 kOhms Trigger: Trigger Input: 5 - 20 V (AC or DC); < 10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 50 mA. Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). Front Panel Controls and Indicators: Standby; push button (changes color to indicate Standby or On). Status LEDs (one per channel); illuminate blue for normal operation or red to indicate a fault (may be disabled by rear panel Status LED switch). Rear Panel Controls: AC Power switch; rocker switch (switches AC mains power). Status LEDs switch; small slide switch on left rear (disables front panel Status LEDs). Protection: The UPA-200 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. If a fault occurs, the UPA-200 will return to Standby mode, the Standby push button will light amber, and the Status LEDs will flash red. Size: unboxed: 17 wide x 3.375 high x 16.5 deep Weight: 24 lbs (net); 32 lbs (boxed) Features: A true audiophile-quality stereo amplifier. Advanced engineering with SMD gain blocks. Wideband, short signal path, class A/B design topology. Top quality parts and construction. Real power easily drives complex loads. Heavy-duty power supply with oversized toroidal transformer. Gold plated five way binding post speaker terminals. Gold plated RCA input terminals. Classic Emotiva styling with rugged solid steel chassis. 15mm solid milled aluminum faceplate. Channel status LED’s. (which can be disabled in stealth mode). Remote trigger input and output. 115 VAC or 230 VAC with automatic detection and switching. Full protection from all common input and output fault conditions. Ship to USA only, payment due within 2 days of auctions end.

This is a creampuff, mint condition. I have enjoyed this amp for a couple years before I moved to another state. It has been in environmentally controlled storage since Dec 2019. I just dont have the space in my current house for a stereo system, which this was a part of in my previously larger home. It is in the original packaging with box and styrofoam. I unboxed it and it works as great as the day I packed it up. No scratches, dents, or any issues. Sounds great! This auction is just for the power amp, the preamp is separate auction.The last photo is a stock photo from Audioholics. Topology: Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven). Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Minimum Recommended Load Impedance: 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel). Frequency Response: 5 Hz to 80 kHz + 0 / - 2 dB. THD + N: < 0.03% Signal to Noise Ratio (8 Ohm load): 92 dB at 1 watt (A-weighted). 106 dB at rated power (A-weighted). Damping Factor (8 Ohm load): 500 Speaker Output Connections: Full-sized 5-way binding posts; one pair per channel x 2. Power Supply: 350 VA high current ultra-low noise toroidal power transformer. 40,000 uF of storage capacitance. Input sensitivity (for rated power; 8 Ohm load): 1.1 V (for full output; 8 ohms). Gain: 29 dB Input Connections: Unbalanced (RCA); one per channel. Input Impedance: 47 kOhms Trigger: Trigger Input: 5 - 20 V (AC or DC); < 10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 50 mA. Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). Front Panel Controls and Indicators: Standby; push button (changes color to indicate Standby or On). Status LEDs (one per channel); illuminate blue for normal operation or red to indicate a fault (may be disabled by rear panel Status LED switch). Rear Panel Controls: AC Power switch; rocker switch (switches AC mains power). Status LEDs switch; small slide switch on left rear (disables front panel Status LEDs). Protection: The UPA-200 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. If a fault occurs, the UPA-200 will return to Standby mode, the Standby push button will light amber, and the Status LEDs will flash red. Size: unboxed: 17 wide x 3.375 high x 16.5 deep Weight: 24 lbs (net); 32 lbs (boxed) Features: A true audiophile-quality stereo amplifier. Advanced engineering with SMD gain blocks. Wideband, short signal path, class A/B design topology. Top quality parts and construction. Real power easily drives complex loads. Heavy-duty power supply with oversized toroidal transformer. Gold plated five way binding post speaker terminals. Gold plated RCA input terminals. Classic Emotiva styling with rugged solid steel chassis. 15mm solid milled aluminum faceplate. Channel status LED’s. (which can be disabled in stealth mode). Remote trigger input and output. 115 VAC or 230 VAC with automatic detection and switching. Full protection from all common input and output fault conditions. Ship to USA only, payment due within 2 days of auctions end.

Pulled from my theater room setup is this powerful Emotiva UPA-200 Stereo Power Amplifier. Designed to deliver superior and clear sound, its perfect for audiophiles and music enthusiasts. With two channels, this amplifier can cater to your home audio needs and bring out the best in your sound system. The amplifier works and appears like new and was always cooled using an AC Infinity fan so you know it has not been exposed to high temperatures that might lean towards premature failure. I replaced this unit with a 4 channel unit for Atmos speakers, where this drove a 2 channel ATMOS setup previously. Made by Emotiva, a brand known for its high-quality audio products, this amplifier is a great addition to your home entertainment setup. Its model number is UPA-200, making it easy to find compatible accessories for your audio system. Get ready to enjoy your music like never before with this reliable power amplifier.

This is a creampuff, mint condition. I have enjoyed this amp for a couple years before I moved to another state. It has been in environmentally controlled storage since Dec 2019. I just dont have the space in my current house for a stereo system, which this was a part of in my previously larger home. It is in the original packaging with box and styrofoam. I unboxed it and it works as great as the day I packed it up. No scratches, dents, or any issues. Sounds great! This auction is just for the power amp, the preamp is separate auction.The last photo is a stock photo from Audioholics. Topology: Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven). Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Minimum Recommended Load Impedance: 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel). Frequency Response: 5 Hz to 80 kHz + 0 / - 2 dB. THD + N: < 0.03% Signal to Noise Ratio (8 Ohm load): 92 dB at 1 watt (A-weighted). 106 dB at rated power (A-weighted). Damping Factor (8 Ohm load): 500 Speaker Output Connections: Full-sized 5-way binding posts; one pair per channel x 2. Power Supply: 350 VA high current ultra-low noise toroidal power transformer. 40,000 uF of storage capacitance. Input sensitivity (for rated power; 8 Ohm load): 1.1 V (for full output; 8 ohms). Gain: 29 dB Input Connections: Unbalanced (RCA); one per channel. Input Impedance: 47 kOhms Trigger: Trigger Input: 5 - 20 V (AC or DC); < 10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 50 mA. Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). Front Panel Controls and Indicators: Standby; push button (changes color to indicate Standby or On). Status LEDs (one per channel); illuminate blue for normal operation or red to indicate a fault (may be disabled by rear panel Status LED switch). Rear Panel Controls: AC Power switch; rocker switch (switches AC mains power). Status LEDs switch; small slide switch on left rear (disables front panel Status LEDs). Protection: The UPA-200 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. If a fault occurs, the UPA-200 will return to Standby mode, the Standby push button will light amber, and the Status LEDs will flash red. Size: unboxed: 17 wide x 3.375 high x 16.5 deep Weight: 24 lbs (net); 32 lbs (boxed) Features: A true audiophile-quality stereo amplifier. Advanced engineering with SMD gain blocks. Wideband, short signal path, class A/B design topology. Top quality parts and construction. Real power easily drives complex loads. Heavy-duty power supply with oversized toroidal transformer. Gold plated five way binding post speaker terminals. Gold plated RCA input terminals. Classic Emotiva styling with rugged solid steel chassis. 15mm solid milled aluminum faceplate. Channel status LED’s. (which can be disabled in stealth mode). Remote trigger input and output. 115 VAC or 230 VAC with automatic detection and switching. Full protection from all common input and output fault conditions. Ship to USA only, payment due within 2 days of auctions end.

This is a creampuff, mint condition. I have enjoyed this amp for a couple years before I moved to another state. It has been in environmentally controlled storage since Dec 2019. I just dont have the space in my current house for a stereo system, which this was a part of in my previously larger home. It is in the original packaging with box and styrofoam. I unboxed it and it works as great as the day I packed it up. No scratches, dents, or any issues. Sounds great! This auction is just for the power amp, the preamp is separate auction.The last photo is a stock photo from Audioholics. Topology: Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven). Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Minimum Recommended Load Impedance: 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel). Frequency Response: 5 Hz to 80 kHz + 0 / - 2 dB. THD + N: < 0.03% Signal to Noise Ratio (8 Ohm load): 92 dB at 1 watt (A-weighted). 106 dB at rated power (A-weighted). Damping Factor (8 Ohm load): 500 Speaker Output Connections: Full-sized 5-way binding posts; one pair per channel x 2. Power Supply: 350 VA high current ultra-low noise toroidal power transformer. 40,000 uF of storage capacitance. Input sensitivity (for rated power; 8 Ohm load): 1.1 V (for full output; 8 ohms). Gain: 29 dB Input Connections: Unbalanced (RCA); one per channel. Input Impedance: 47 kOhms Trigger: Trigger Input: 5 - 20 V (AC or DC); < 10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 50 mA. Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). Front Panel Controls and Indicators: Standby; push button (changes color to indicate Standby or On). Status LEDs (one per channel); illuminate blue for normal operation or red to indicate a fault (may be disabled by rear panel Status LED switch). Rear Panel Controls: AC Power switch; rocker switch (switches AC mains power). Status LEDs switch; small slide switch on left rear (disables front panel Status LEDs). Protection: The UPA-200 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. If a fault occurs, the UPA-200 will return to Standby mode, the Standby push button will light amber, and the Status LEDs will flash red. Size: unboxed: 17 wide x 3.375 high x 16.5 deep Weight: 24 lbs (net); 32 lbs (boxed) Features: A true audiophile-quality stereo amplifier. Advanced engineering with SMD gain blocks. Wideband, short signal path, class A/B design topology. Top quality parts and construction. Real power easily drives complex loads. Heavy-duty power supply with oversized toroidal transformer. Gold plated five way binding post speaker terminals. Gold plated RCA input terminals. Classic Emotiva styling with rugged solid steel chassis. 15mm solid milled aluminum faceplate. Channel status LED’s. (which can be disabled in stealth mode). Remote trigger input and output. 115 VAC or 230 VAC with automatic detection and switching. Full protection from all common input and output fault conditions. Ship to USA only, payment due within 2 days of auctions end.

This is a creampuff, mint condition. I have enjoyed this amp for a couple years before I moved to another state. It has been in environmentally controlled storage since Dec 2019. I just dont have the space in my current house for a stereo system, which this was a part of in my previously larger home. It is in the original packaging with box and styrofoam. I unboxed it and it works as great as the day I packed it up. No scratches, dents, or any issues. Sounds great! This auction is just for the power amp, the preamp is separate auction.The last photo is a stock photo from Audioholics. Topology: Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven). Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Minimum Recommended Load Impedance: 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel). Frequency Response: 5 Hz to 80 kHz + 0 / - 2 dB. THD + N: < 0.03% Signal to Noise Ratio (8 Ohm load): 92 dB at 1 watt (A-weighted). 106 dB at rated power (A-weighted). Damping Factor (8 Ohm load): 500 Speaker Output Connections: Full-sized 5-way binding posts; one pair per channel x 2. Power Supply: 350 VA high current ultra-low noise toroidal power transformer. 40,000 uF of storage capacitance. Input sensitivity (for rated power; 8 Ohm load): 1.1 V (for full output; 8 ohms). Gain: 29 dB Input Connections: Unbalanced (RCA); one per channel. Input Impedance: 47 kOhms Trigger: Trigger Input: 5 - 20 V (AC or DC); < 10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 50 mA. Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). Front Panel Controls and Indicators: Standby; push button (changes color to indicate Standby or On). Status LEDs (one per channel); illuminate blue for normal operation or red to indicate a fault (may be disabled by rear panel Status LED switch). Rear Panel Controls: AC Power switch; rocker switch (switches AC mains power). Status LEDs switch; small slide switch on left rear (disables front panel Status LEDs). Protection: The UPA-200 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. If a fault occurs, the UPA-200 will return to Standby mode, the Standby push button will light amber, and the Status LEDs will flash red. Size: unboxed: 17 wide x 3.375 high x 16.5 deep Weight: 24 lbs (net); 32 lbs (boxed) Features: A true audiophile-quality stereo amplifier. Advanced engineering with SMD gain blocks. Wideband, short signal path, class A/B design topology. Top quality parts and construction. Real power easily drives complex loads. Heavy-duty power supply with oversized toroidal transformer. Gold plated five way binding post speaker terminals. Gold plated RCA input terminals. Classic Emotiva styling with rugged solid steel chassis. 15mm solid milled aluminum faceplate. Channel status LED’s. (which can be disabled in stealth mode). Remote trigger input and output. 115 VAC or 230 VAC with automatic detection and switching. Full protection from all common input and output fault conditions. Ship to USA only, payment due within 2 days of auctions end.

This is a creampuff, mint condition. I have enjoyed this amp for a couple years before I moved to another state. It has been in environmentally controlled storage since Dec 2019. I just dont have the space in my current house for a stereo system, which this was a part of in my previously larger home. It is in the original packaging with box and styrofoam. I unboxed it and it works as great as the day I packed it up. No scratches, dents, or any issues. Sounds great! This auction is just for the power amp, the preamp is separate auction.The last photo is a stock photo from Audioholics. Topology: Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven). Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Minimum Recommended Load Impedance: 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel). Frequency Response: 5 Hz to 80 kHz + 0 / - 2 dB. THD + N: < 0.03% Signal to Noise Ratio (8 Ohm load): 92 dB at 1 watt (A-weighted). 106 dB at rated power (A-weighted). Damping Factor (8 Ohm load): 500 Speaker Output Connections: Full-sized 5-way binding posts; one pair per channel x 2. Power Supply: 350 VA high current ultra-low noise toroidal power transformer. 40,000 uF of storage capacitance. Input sensitivity (for rated power; 8 Ohm load): 1.1 V (for full output; 8 ohms). Gain: 29 dB Input Connections: Unbalanced (RCA); one per channel. Input Impedance: 47 kOhms Trigger: Trigger Input: 5 - 20 V (AC or DC); < 10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 50 mA. Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). Front Panel Controls and Indicators: Standby; push button (changes color to indicate Standby or On). Status LEDs (one per channel); illuminate blue for normal operation or red to indicate a fault (may be disabled by rear panel Status LED switch). Rear Panel Controls: AC Power switch; rocker switch (switches AC mains power). Status LEDs switch; small slide switch on left rear (disables front panel Status LEDs). Protection: The UPA-200 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. If a fault occurs, the UPA-200 will return to Standby mode, the Standby push button will light amber, and the Status LEDs will flash red. Size: unboxed: 17 wide x 3.375 high x 16.5 deep Weight: 24 lbs (net); 32 lbs (boxed) Features: A true audiophile-quality stereo amplifier. Advanced engineering with SMD gain blocks. Wideband, short signal path, class A/B design topology. Top quality parts and construction. Real power easily drives complex loads. Heavy-duty power supply with oversized toroidal transformer. Gold plated five way binding post speaker terminals. Gold plated RCA input terminals. Classic Emotiva styling with rugged solid steel chassis. 15mm solid milled aluminum faceplate. Channel status LED’s. (which can be disabled in stealth mode). Remote trigger input and output. 115 VAC or 230 VAC with automatic detection and switching. Full protection from all common input and output fault conditions. Ship to USA only, payment due within 2 days of auctions end.

This is a creampuff, mint condition. I have enjoyed this amp for a couple years before I moved to another state. It has been in environmentally controlled storage since Dec 2019. I just dont have the space in my current house for a stereo system, which this was a part of in my previously larger home. It is in the original packaging with box and styrofoam. I unboxed it and it works as great as the day I packed it up. No scratches, dents, or any issues. Sounds great! This auction is just for the power amp, the preamp is separate auction.The last photo is a stock photo from Audioholics. Topology: Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven). Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Minimum Recommended Load Impedance: 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel). Frequency Response: 5 Hz to 80 kHz + 0 / - 2 dB. THD + N: < 0.03% Signal to Noise Ratio (8 Ohm load): 92 dB at 1 watt (A-weighted). 106 dB at rated power (A-weighted). Damping Factor (8 Ohm load): 500 Speaker Output Connections: Full-sized 5-way binding posts; one pair per channel x 2. Power Supply: 350 VA high current ultra-low noise toroidal power transformer. 40,000 uF of storage capacitance. Input sensitivity (for rated power; 8 Ohm load): 1.1 V (for full output; 8 ohms). Gain: 29 dB Input Connections: Unbalanced (RCA); one per channel. Input Impedance: 47 kOhms Trigger: Trigger Input: 5 - 20 V (AC or DC); < 10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 50 mA. Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). Front Panel Controls and Indicators: Standby; push button (changes color to indicate Standby or On). Status LEDs (one per channel); illuminate blue for normal operation or red to indicate a fault (may be disabled by rear panel Status LED switch). Rear Panel Controls: AC Power switch; rocker switch (switches AC mains power). Status LEDs switch; small slide switch on left rear (disables front panel Status LEDs). Protection: The UPA-200 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. If a fault occurs, the UPA-200 will return to Standby mode, the Standby push button will light amber, and the Status LEDs will flash red. Size: unboxed: 17 wide x 3.375 high x 16.5 deep Weight: 24 lbs (net); 32 lbs (boxed) Features: A true audiophile-quality stereo amplifier. Advanced engineering with SMD gain blocks. Wideband, short signal path, class A/B design topology. Top quality parts and construction. Real power easily drives complex loads. Heavy-duty power supply with oversized toroidal transformer. Gold plated five way binding post speaker terminals. Gold plated RCA input terminals. Classic Emotiva styling with rugged solid steel chassis. 15mm solid milled aluminum faceplate. Channel status LED’s. (which can be disabled in stealth mode). Remote trigger input and output. 115 VAC or 230 VAC with automatic detection and switching. Full protection from all common input and output fault conditions. Ship to USA only, payment due within 2 days of auctions end.

Emotiva UPA-200 Stereo Power Amplifier. Unit works great. Comes with power cord. Ships FEDEX, CONUS only. Worldwide shipping via ebay international shipping program.

This is a creampuff, mint condition. I have enjoyed this amp for a couple years before I moved to another state. It has been in environmentally controlled storage since Dec 2019. I just dont have the space in my current house for a stereo system, which this was a part of in my previously larger home. It is in the original packaging with box and styrofoam. I unboxed it and it works as great as the day I packed it up. No scratches, dents, or any issues. Sounds great! This auction is just for the power amp, the preamp is separate auction.The last photo is a stock photo from Audioholics. Topology: Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven). Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Minimum Recommended Load Impedance: 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel). Frequency Response: 5 Hz to 80 kHz + 0 / - 2 dB. THD + N: < 0.03% Signal to Noise Ratio (8 Ohm load): 92 dB at 1 watt (A-weighted). 106 dB at rated power (A-weighted). Damping Factor (8 Ohm load): 500 Speaker Output Connections: Full-sized 5-way binding posts; one pair per channel x 2. Power Supply: 350 VA high current ultra-low noise toroidal power transformer. 40,000 uF of storage capacitance. Input sensitivity (for rated power; 8 Ohm load): 1.1 V (for full output; 8 ohms). Gain: 29 dB Input Connections: Unbalanced (RCA); one per channel. Input Impedance: 47 kOhms Trigger: Trigger Input: 5 - 20 V (AC or DC); < 10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 50 mA. Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). Front Panel Controls and Indicators: Standby; push button (changes color to indicate Standby or On). Status LEDs (one per channel); illuminate blue for normal operation or red to indicate a fault (may be disabled by rear panel Status LED switch). Rear Panel Controls: AC Power switch; rocker switch (switches AC mains power). Status LEDs switch; small slide switch on left rear (disables front panel Status LEDs). Protection: The UPA-200 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. If a fault occurs, the UPA-200 will return to Standby mode, the Standby push button will light amber, and the Status LEDs will flash red. Size: unboxed: 17 wide x 3.375 high x 16.5 deep Weight: 24 lbs (net); 32 lbs (boxed) Features: A true audiophile-quality stereo amplifier. Advanced engineering with SMD gain blocks. Wideband, short signal path, class A/B design topology. Top quality parts and construction. Real power easily drives complex loads. Heavy-duty power supply with oversized toroidal transformer. Gold plated five way binding post speaker terminals. Gold plated RCA input terminals. Classic Emotiva styling with rugged solid steel chassis. 15mm solid milled aluminum faceplate. Channel status LED’s. (which can be disabled in stealth mode). Remote trigger input and output. 115 VAC or 230 VAC with automatic detection and switching. Full protection from all common input and output fault conditions. Ship to USA only, payment due within 2 days of auctions end.

EMOTIVA UPA-200POWER AMPLIFIER 2-CHANNELS100 WATTS PER SIDE VERY GOOD CONDITION IF YOU HAVE ANY QUESTIONSPLEASE FEEL FREE TO ASKBEFORE BIDDING THANK YOU & GOOD LUCK

** If you have a Feedback score of 20 or less, do not purchase this, your transaction will be cancelled** **If Buyer info doesnt match with Ship To info, the transaction will be cancelled** Please read above statements and understand before purchase. Very Good condition Emotiva UPA 200. Comes with a Pangea power cord I upgraded this to. Shipping to contiguous 48, no international shipping.. Specs:Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven).Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Will ship UPS by default,or can use FedEx if you prefer. I dont use Usps. No refunds, this is being sold As-Is, as it is a older used amplifier close to 12 years old now. Buy with confidence, I have perfect feedback since 2005 Can be picked up locally to me in the DFW area, zip code 75075. Thanks.

Perfect condition. Includes power cord. $300 + $50 shipping to CONUS. No International shipping.

** If you have a Feedback score of 20 or less, do not purchase this, your transaction will be cancelled** **If Buyer info doesnt match with Ship To info, the transaction will be cancelled** Please read above statements and understand before purchase. Very Good condition Emotiva UPA 200. Comes with a Pangea power cord I upgraded this to. Shipping with insurance to contigious 48, no international shipping.. Specs:Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven).Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Will ship UPS by default, or can use FedEx if you prefer. I dont use Usps. *******************************************************Will be shipped once Ebay releases funds, usually within 5 days of purchase date. The additional days are in addition to the 3 days Ebay Allows for shipping. If you do not agree with this, dont buy it. I dont consider my items paid for, until funds are released to me by Ebay. ********************************************************* No refunds, this is being sold As-Is, as it is a older used amplifier close to 12 years old now. Buy with confidence, I have perfect feedback Can be picked up locally to me in the DFW area, zip code 75075. Thanks.

Very Good condition Emotiva UPA 200. Comes with a Pangea power cord I upgraded this to. Shipping with insurance to contigious 48, no international shipping.. Specs: Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven). Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Will ship UPS by default, , or can use FedEx if you prefer. I dont use Usps. No refunds, this is being sold As-Is and is a used Amplifier. Buy with confidence, I have perfect feedback and go the extra mile on packing when I ship something. Can be picked up locally to me in the DFW area, zip code 75075. Thanks.

Emotiva UPA-200 Stereo Power Amplifier. Item is used, but in perfect working order. 2-Channels/100 watts per side. Will ship to the continental US. Buyer pays actual shipping costs.