Vintage 12AX7 / ECC83 Miniwatt Dario, 1964 Neuf.

Vintage 12AX7 / ECC83 Miniwatt Dario, 1964 Neuf.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I66 Philips MiniWatt HeeRLEN code 3D2 short plates 1,2mA/1,0mA (3,2/3,0) 52/50 Most common Heerlen modelhttp://www.tube-classics.de/TC/Tubes/Valvo%20ECC83/ECC83.htm ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I66 MINIWATT SHORT GREY RIBBED PLATES DIMPLE GETTER ?0J1 code 1,5mA/1,2mA (3,8/3,3) 1,5mA/1,5mA (3,8/3,8) 60/54; 57/50 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN MINIWATT ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?N bottom code 1,5mA/1,6mA (3,7/3,9) 56/58 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

Vintage 12AX7 / ECC83 Miniwatt Dario, 1964 Neuf.

2x Philips Miniwatt ECC83 Röhre getestet mit dem Neuberger RPM 375 - bei diesem Gerät sind 1,2mA = 100%die Werte von einer Röhre sind 1,6 / 1,6mA - bei der anderen sind sie 1,3 / 1,4mA die bereitgestellten Fotos zeigen den angebotenen Artikelaußerdem zeigen sie die Bestandteile der Lieferungweitere Artikel finden Sie in meinem Shop

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN MINIWATT ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?N bottom code 1,5mA/1,6mA (3,7/3,9) 56/58 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I66 MINIWATT SHORT GREY RIBBED PLATES DIMPLE GETTER ?0J1 code 1,5mA/1,2mA (3,8/3,3) 1,5mA/1,5mA (3,8/3,8) 60/54; 57/50 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

Vintage 12AX7 / ECC83 Miniwatt Dario, 1964 Neuf.

paire (2) de 12AX7 / ECC83 MINIWATT DARIO VÉRITABLE 12AX7/ ECC83 MINIWATT DARIO MC2 FABRICATION : FRANCE CODES MC2 LONG PLATE 17MM CODES TUBES IDENTIQUES : MC2 F8J5 TUBES testé METRIX U61 Valeurs fabriquant 100% = 1,2ma / 1,2ma , 1,6ma/v , 1,6ma/v @250/--2 Valeurs metrix U61 tube 1 = 1 ma / 1 ma , 2 ma/v , 2 ma/v @250/--2 Valeurs metrix U61 tube 2 = 1 ma / 1 ma , 2 ma/v , 2 ma/v @250/--2 EXPÉDITION MONDIAL

Vintage 12AX7 / ECC83 Miniwatt Dario, 1964 Neuf.

PHILIPS Miniwatt Mullard ECC83 12AX7 Blackburn code I61 B1A-B1B .Testate e funzionanti. Coppia matched Gm=1600/1600 1.0/1.0ma Gm=1600/1600 0.9/1.0ma Foto reali dell'oggetto in vendita

2 x ECC 83 Valvo - Philips Miniwatt - tested on Neuberger RPM 370 Tube 1 - (1,65 mA/1,50 mA) code I65 delta2 D4 Tube 2 - (1,65 mA/1,60 mA) code I65 delta3 F4 100% = (1,20 mA) Versandkosten/Shipment cost - Germany - EUR 5,49 (DHL-Paket) / EU - EUR 12,99 (DHL - registered airmail) Europe - EUR 17,49 (DHL - registered airmail) Worldwide - EUR 22,49 (DHL - registered airmail) No shipment to Russia and Ukraine Privatverkauf - Keine Garantie - Keine Rücknahme. Private sale - no return - no refund. Please note - the auction price do not include any import taxes or duty. so you need to pay the V.A.T. or GST by yourself. no add. cost for combine shipping

Heute biete ich Ihnen folgendes an: 6 X ECC83 = 12AX7A = 12AX7 Philips Miniwatt / unbenutzt technischer Zustand: sehr guter Zustand optischer Zustand: sehr guter Zustand Falls Sie den oben aufgeführten Artikel ersteigern und diesen persönlich bei mir abholen, so können wir diesen sehr gerne gemeinsam auf den von mir angegebenen Zustand hin überprüfen. No shipping to USA

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I66 Philips MiniWatt HeeRLEN code 3D2 short plates 1,2mA/1,0mA (3,2/3,0) 52/50 Most common Heerlen modelhttp://www.tube-classics.de/TC/Tubes/Valvo%20ECC83/ECC83.htm ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I66 MINIWATT SHORT GREY RIBBED PLATES DIMPLE GETTER ?0J1 code 1,5mA/1,2mA (3,8/3,3) 1,5mA/1,5mA (3,8/3,8) 60/54; 57/50 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) mCN MINIWATT ULTRA RARE COPPER ANODES LONG GREY PLATES 45° D-FOIL GETTER mCn ?N bottom code 1,5mA/1,6mA (3,7/3,9) 56/58 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...