TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC (how they test it with ROETEST V10)Va=90V Vg1=-1,2V Ia=15mA (Va=100V Vg1=-1,2V Ia=17mA) HICKOK TV7D/U EV2-1030 B21 D min=50 (100%=84) EV7-6080 B21 D min=50 (100%=84)Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 14,4/13,0 (17,1/15,4) 80/75 VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 14,6/13,1 (16,4/16,0) 76/75 ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC (how they test it with ROETEST V10)Va=90V Vg1=-1,2V Ia=15mA (Va=100V Vg1=-1,2V Ia=17mA) HICKOK TV7D/U EV2-1030 B21 D min=50 (100%=84) EV7-6080 B21 D min=50 (100%=84)Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 12,5/15,0 (15,1/16,8) 68/74 ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC (how they test it with ROETEST V10)Va=90V Vg1=-1,2V Ia=15mA (Va=100V Vg1=-1,2V Ia=17mA) HICKOK TV7D/U EV2-1030 B21 D min=50 (100%=84) EV7-6080 B21 D min=50 (100%=84)Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 12,0/12,5 (14,2/14,5) 68/71 ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC (how they test it with ROETEST V10)Va=90V Vg1=-1,2V Ia=15mA (Va=100V Vg1=-1,2V Ia=17mA) HICKOK TV7D/U EV2-1030 B21 D min=50 (100%=84) EV7-6080 B21 D min=50 (100%=84)Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 12,0/13,6 (14,2/15,7) 69/64 VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 12,9/13,1 (15,4/16,0) 67/65 ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC (how they test it with ROETEST V10)Va=90V Vg1=-1,2V Ia=15mA (Va=100V Vg1=-1,2V Ia=17mA) HICKOK TV7D/U EV2-1030 B21 D min=50 (100%=84) EV7-6080 B21 D min=50 (100%=84)Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 15,2/12,2 (18,0/14,1) 75/69 VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 15,2/12,4 (17,9/14,6) 75/70 ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC (how they test it with ROETEST V10)Va=90V Vg1=-1,2V Ia=15mA (Va=100V Vg1=-1,2V Ia=17mA) HICKOK TV7D/U EV2-1030 B21 D min=50 (100%=84) EV7-6080 B21 D min=50 (100%=84)Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 12,0/13,6 (14,2/15,7) 69/64 VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 12,9/13,1 (15,4/16,0) 67/65 ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC (how they test it with ROETEST V10)Va=90V Vg1=-1,2V Ia=15mA (Va=100V Vg1=-1,2V Ia=17mA) HICKOK TV7D/U EV2-1030 B21 D min=50 (100%=84) EV7-6080 B21 D min=50 (100%=84)Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 11,8/12,5 (14,3/14,8) 69/76 ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC (how they test it with ROETEST V10)Va=90V Vg1=-1,2V Ia=15mA (Va=100V Vg1=-1,2V Ia=17mA) HICKOK TV7D/U EV2-1030 B21 D min=50 (100%=84) EV7-6080 B21 D min=50 (100%=84)Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 16,6/12,4 (19,1/14,5) 82/64 ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC (how they test it with ROETEST V10)Va=90V Vg1=-1,2V Ia=15mA (Va=100V Vg1=-1,2V Ia=17mA) HICKOK TV7D/U EV2-1030 B21 D min=50 (100%=84) EV7-6080 B21 D min=50 (100%=84)Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 12,8/11,5 (15,4/14,1) 73/68 ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC (how they test it with ROETEST V10)Va=90V Vg1=-1,2V Ia=15mA (Va=100V Vg1=-1,2V Ia=17mA) HICKOK TV7D/U EV2-1030 B21 D min=50 (100%=84) EV7-6080 B21 D min=50 (100%=84)Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 12,9/13,5 (16,3/16,4) 75/74 VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 13,6/12,9 (16,6/15,9) 73/77 ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC (how they test it with ROETEST V10)Va=90V Vg1=-1,2V Ia=15mA (Va=100V Vg1=-1,2V Ia=17mA) HICKOK TV7D/U EV2-1030 B21 D min=50 (100%=84) EV7-6080 B21 D min=50 (100%=84)Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 16,7/13,7 (19,2/16,0) 79/67 ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC (how they test it with ROETEST V10)Va=90V Vg1=-1,2V Ia=15mA (Va=100V Vg1=-1,2V Ia=17mA) HICKOK TV7D/U EV2-1030 B21 D min=50 (100%=84) EV7-6080 B21 D min=50 (100%=84)Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWATT STRAIGHT ARM RING GETTER MICA SPRING GOLD PINS F8K3 code 12,6/13,8 (15,1/16,8) 71/68 ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

- Paire de tubes E188CC Dario miniwatt , match pair - Code VR7-F8K4 - Marquage vert , pins gold - Test ok - Ancien stock dune administration Française , services publics - Tubes sans emballages - Envoi France : 7 euros- Envoi Union Européenne : 15 euros- Pour un envoi hors Union Européenne me contacter pour le prix

Philips Holland E188CC Röhre miniwatt CCa E88CC Die Röhre ist augenscheinlich. gebraucht Siehe Bilder Ich verkaufe die Röhre ausdrücklich als ungetestet Und auf Grund des Alters ohne Garantie auf Funktion und schließe einen Umtausch aus. Für Versand außerhalb der EU erfragen Sie bitte die Versandkosten

Philips Holland E188CC Röhre miniwatt CCa E88CC Die Röhre ist augenscheinlich. gebraucht Siehe Bilder Ich verkaufe die Röhre ausdrücklich als ungetestet Und auf Grund des Alters ohne Garantie auf Funktion und schließe einen Umtausch aus. Für Versand außerhalb der EU erfragen Sie bitte die Versandkosten

Philips Holland E188CC Röhre miniwatt CCa E88CC Die Röhre ist augenscheinlich. gebraucht Siehe Bilder Ich verkaufe die Röhre ausdrücklich als ungetestet Und auf Grund des Alters ohne Garantie auf Funktion und schließe einen Umtausch aus. Für Versand außerhalb der EU erfragen Sie bitte die Versandkosten

Philips Holland E188CC Röhre miniwatt CCa E88CC Die Röhre ist augenscheinlich. gebraucht Siehe Bilder Ich verkaufe die Röhre ausdrücklich als ungetestet Und auf Grund des Alters ohne Garantie auf Funktion und schließe einen Umtausch aus. Für Versand außerhalb der EU erfragen Sie bitte die Versandkosten

Philips Holland E188CC Röhre miniwatt CCa E88CC Die Röhre ist augenscheinlich. gebraucht Siehe Bilder Ich verkaufe die Röhre ausdrücklich als ungetestet Und auf Grund des Alters ohne Garantie auf Funktion und schließe einen Umtausch aus. Für Versand außerhalb der EU erfragen Sie bitte die Versandkosten

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=90V Vg1=-1,2V Ia=15mA HICKOK TV7D/U (6922 tube)EV2-1030 B21 D min=50EV7/6080 B21 D min=50Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWatt RING GETTER MICA SPRING GOLD PINS F8L1 code 13,8mA/14,6mA 85/90 VR7 MINIWatt RING GETTER MICA SPRING GOLD PINS F8L1 code 14,7mA/14,0mA 93/88 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=90V Vg1=-1,2V Ia=15mA HICKOK TV7D/U (6922 tube)EV2-1030 B21 D min=50EV7/6080 B21 D min=50Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWatt RING GETTER MICA SPRING GOLD PINS F8L1 code 16,2mA/15,5mA 94/89 VR7 MINIWatt RING GETTER MICA SPRING GOLD PINS F8L1 code 16,0mA/16,2mA 90/94 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=90V Vg1=-1,2V Ia=15mA HICKOK TV7D/U (6922 tube)EV2-1030 B21 D min=50EV7/6080 B21 D min=50Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWatt RING GETTER MICA SPRING GOLD PINS F8L1 code 15,4mA/15,8mA 90/94 VR7 MINIWatt RING GETTER MICA SPRING GOLD PINS F8L1 code 15,8mA/15,1mA 95/88 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

Röhre E188CC tube Philips Miniwatt SQ ( Special Quality) NOS, OVP, ungebraucht neuwertig Code: VR8 2E5 Biete z.Z. über 250 Auktionen mit Röhren an. Sehen Sie in meinem Ebay-Shop unter Röhren und Auktionen nach. Dabei ist bestimmt etwas. Versandrabatt Ja. 1x der höchste Versand der angegeben ist - die anderen Artikel die ersteigert werden, werden kostenlos mitgeliefert. Normal 0 21 false false false MicrosoftInternetExplorer4 Röhren Telefunken, Röhren Siemens, Röhren Lorenz, Röhren RFT, Röhren ITT, Röhre Brandes, TungSol, Wehrmacht Röhre, Senderöhre, Empfänger Röhre, ECC 83SS , EL 84, Ziffernanzeigen, Wehrmachts-Röhre, Röhre RS, Röhrenverstärker, Endstufen, Röhrenprüfgerät, 6AS7, TUBE, VALVO, ED-Post-Röhre, AD1, RS237, Triode, Konvolut, E88CC, E803CC, EL34, E280F, E130L, KC1, ECC2000, RL12P10, RD12TA, ECC801S

E188CC MINIWATT Siemens MINIWATT Tube TSF LAMPE

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=90V Vg1=-1,2V Ia=15mA HICKOK TV7D/U (6922 tube)EV2-1030 B21 D min=50EV7/6080 B21 D min=50Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) VR7 MINIWatt RING GETTER MICA SPRING GOLD PINS F8L1 code 15,4mA/15,8mA 90/94 VR7 MINIWatt RING GETTER MICA SPRING GOLD PINS F8L1 code 15,8mA/15,1mA 95/88 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...