Dynavector HX 1.2 mk2 Stereo Power Amplifier. This is a special one, MK II (identifiable by silver rear case and not black), and seldom come on the market. I bought this new and have cherished it. It is in outstanding condition, works perfectly and as advised by the UK Dynavetor agent does not require any servicing (unlike my NAIM equipment). I brought this amp to replace my two NAP250 amps and frankly it knocked the NAIM right out of the park. Only reason I am selling is we have downsized and gone the ‘one box’ route and bought an Accuphase integrated amp. I love the amp and would rather keep it than give it away, so looking for a fair and reasonable sale price. Technical Notes: The Dynavector HX-1.2 is a two channel (stereo) power amplifier rated at around 180 Watts per channel. The HX-1.2 uses special, very linear FET’s in the output stage similar to HEXFET’s ... hence Dynavector power amplifiers being commonly referred to as “HEXFET’s”. The HX-1.2 provides very low distortion* and tremendous dynamic current drive that to some extent renders the power output rating meaningless. The FET’s and associated circuitry used in Dynavector amplifiers’ exhibit none of the typical MOSFET sound noted in conventional FET designs, while retaining all the traditional FET advantages over the commonly used bipolar transistors. The Dynavector amplifier circuitry is symmetrical, deceptively simple and extremely fast. The output stage can deliver very high currents, very quickly into the load allowing the HX- 1.2 to outperform amplifiers many times its power rating. The amplifier is unconditionally stable into all loads and all speaker cables. The input stage includes an input coupling capacitor to protect against any unwanted DC offset destroying the loudspeakers. (For example, when power to some pre-amplifiers is removed while it is still connected to the power amplifier. Note: This is not a problem with the Dynavector pre-amplifiers). From the input coupling capacitor the amplifier is fully DC coupled. The high quality printed circuit board is manufactured in Australia and uses increased thickness, pure Australian copper for the conductive track. Special lead free, high silver content solder is used throughout the amplifier and the wiring is high purity, oxygen free copper with TeflonTM dielectric. The transformer is a special toroidal design, being considerably smaller, lighter and with lower impedance than conventional transformers and other toroids. It is wound with pure Australian copper wire and is available in several voltage ranges. It supplies a linear power supply that is tightly coupled to the amplifier circuitry to minimise losses and maximise transient response & power delivery. The transformer is housed in a shielded enclosure to eliminate the effects of its electromagnetic field on sound quality. The HX-1.2 runs cool and uses side mounted, convection chimney heatsinks. The chassis of the amplifier is non-magnetic and strong, making the whole unit solid and enduring. The amplifier is modular in construction, which allows upgrading if any significant new developments arise. Like all the other Dynavector Amplifier products, the design emphasis is on providing outstanding musical performance with very low noise, wide dynamic range and very low distortion of the musical signal. A great deal of design effort has gone into retaining the intrinsic 3-dimensional nature of real instruments and real music. We use live natural music as our reference and spend a great deal of time attending concerts and evaluating our amplifiers’ performance against this experience. This is the standard against which our amplifiers should be judged. *Distortion. Special Note: Our definition of distortion involves any alteration of the original listening experience. That is all the conventional harmonic distortion, intermodulation distortion technical measurements as well as any change to the original listening experience which includes the instruments’ inherent 3-dimensional spatial aspects, instrument placement, ambience, timbre and dynamics. Most aspects of distortion cannot be measured or even accurately quantified however the human ear can easily hear them. We believe that Dynavector Amplifiers’ offer extremely low distortion and invite you to judge for yourself. Finally it is worth noting that there is only one reference for an audio system and that is real, live, acoustic music. This is a reference Dynavector continually strive to get closer and closer to the real thing. All Dynavector amplifier products are the standard international width of 440mm. Power switch, mains fuse and connectors are on the rear panel. Specifications: Output Power Input Sensitivity for full power Mains Versions Available: Mains Fuse: Mains Connection Dimensions Weight (packed) Power Consumption 180 watts per channel nom. 1.5V RMS 220 - 240 vac 110 vac 100 vac Others available upon request. 4AT Time Delay Standard IEC Connector 440 x 390 x 120 nom. 25kg approx. 800 Watts max. Buyer collects or arranges own courier/shipping. Will not ship direct to overseas (including China) - sorry.

### The Audio Board: www.theAudioBoard.com - The Search Tool for Used High-End Audio Equipment### Best Price MOVING SALE: A moving in the summer forces us to liquidate my stuff before that.I am selling a high-performance Dynavector P-75 Mk ii Moving Magnant and Moving Coil MC Phono Preamplifier with Power Supply The preamp works great and produces wonderful full & clean music both channels. Physical condition is great too; with some wear or scratches due to use. The sale only includes the preamp and power cord only. No manual, box, or any other accessories. I ship worldwide.

### The Audio Board: www.theAudioBoard.com - The Search Tool for Used High-End Audio Equipment### Best Price MOVING SALE: A moving in the summer forces us to liquidate my stuff before that.I am selling a high-performance Dynavector P-75 Mk ii Moving Magnant and Moving Coil MC Phono Preamplifier with Power Supply The preamp works great and produces wonderful full & clean music both channels. Physical condition is great too; with some wear or scratches due to use. The sale only includes the preamp and power cord only. No manual, box, or any other accessories. I ship worldwide.

### The Audio Board: www.theAudioBoard.com - The Search Tool for Used High-End Audio Equipment### Best Price MOVING SALE: A moving in the summer forces us to liquate my stuff before that.I am selling a high-performance Dynavector P-75 Mk ii Moving Magnant and Moving Coil MC Phono Preamplifier with Power Supply The preamp works great and produces wonderful full & clean music both channels. Physical condition is great too; with some wear or scratches due to use. The sale only includes the preamp and power cord only. No manual, box, or any other accessories. I ship worldwide.

### The Audio Board: www.theAudioBoard.com - The Search Tool for Used High-End Audio Equipment### Best Price MOVING SALE: A moving in the summer forces us to liquate my stuff before that.I am selling a high-performance Dynavector P-75 Mk ii Moving Magnant and Moving Coil MC Phono Preamplifier with Power Supply The preamp works great and produces wonderful full & clean music both channels. Physical condition is great too; with some wear or scratches due to use. The sale only includes the preamp and power cord only. No manual, box, or any other accessories. I ship worldwide.