Dynavector DV-20x2 phono cartridge for sale. This is upgraded version with brand new boron cantilever with line contact stylus. It is eventually DV-XX2 cartridge with the same body, coils, cantilever/stylus and specifications.The cartridge sounds amazing as its big brother DV-xx2. The cartridge has only 5 hours on new stylus-just to confirm the sound quality. Specifications: Output: 2.8 mVTracks: 1.8-2.2 gLoads: 150 OhmsUnloads: 5 OhmsCompliance: 12 Sell: $699 Shipping inside USA: $5Worldwide shipping: $23

I am the original owner of this Dynavector DV XX2MKII MC Cartridge. It has been used exclusively with a VPI Aries 3 Turntable and the JMW 10.5i tonearm. The XX2MKII has been one of the most musical cartridges I have had in my system to date. At the original retail cost of $2,100 its performance is well above this price point. A sweet spot in the Dynavector line. Cartridge is in excellent condition and has been used with extreme care in a no children, no pet, no smoking environment. Selling as I have upgraded my system. Cartridge will be shipped in its original package plus additional packing materials and exterior box. No international shipping. Continental US ONLY. Thanks for looking.

A late Friend of mine bought this Dynavector XX2 mk2 cartridge soon before he had a fall that broke an ankle, and, then he stopped using his turntable. I’d be surprised if there is more than 100 hours on this cartridge. He left it to me, and as much as I’d like to use it, I need to pay bills. It will come with the paper work, and screw’s, stylus brush and the shabby box I used tape on to keep it closed. It will be packed with care and here’s an opportunity to get a great cartridge that sells for 2150.00 for much less. Item has a few very minor scratches which can be seen in the many photos supplied. I had a tough time trying to get a good shot of the stylus tip, so there are many attempts at that here. The cantilever is straight, and, the tip is intact as it should be. This Cartridge has an Alnico Magnet, and that’s always desirable, no mater what it’s use is. Guitar pickups, Speakers, and cartridges. This alone makes it a more expensive option in the Dynavector line. The DV XX-2 mk ii was the first cartridge (actually, version 1) to feature a magnetic flux damper (patent) and softened magnetism (patent) processes that reject the magnetic fluctuation that is detrimental to a moving coil cartridges performance. The The DV XX-2 MKII retains the benefit of the flux damper but features the Alnico-5 magnet and the similar rigid construction to the Te Kaitora Rua. Alnico magnets exhibit high magnetic flux density combining with a low coercive therefore magnetic resistance is lower than other magnetic types such as rare earth and ferrite, providing the exceptional stability of the XX-2 MKII output voltage. There is also the additional advantage of low magnetic and electrical resistance contributing to a discernable improvement in sound quality. The XX-2MKII also exhibits deep powerful bass, treble is both clear and lively possessing none of the hardness found in many moving coil designs. The XX-2MKII also features a 6 mm solid boron cantilever fitted with a Pathfinder Line contact stylus. PCOCC (pure copper ohno continuous casting process) copper wire is used for the coil. The output voltage of 0.28mV is higher than that of the XX-2 and 6 ohms impedance are suited to most moving coil phono stages. For ridgity of construction the XX-2 MKII cartridge body is machined from 7075 aluminium the hardest available. However, having only a total weight of only 8.9 grams it is suitable for a variety of popular tonearms. Specifications Type Low output moving coil cartridge with Alnico magnet and Flux damper Output Voltage 0.28mV (at 1KHz, 5cm/sec.) Channel Separation 30 dB (at 1KHz) Channel balance 1.0 dB (at 1KHz) Frequency response 20 - 20,000Hz (± 1dB) Compliance 10 mm/N Tracking force 1.8 - 2.2 g Impedance 6 ohms Recommended load impedance > 30 ohms Cantilever 6mm length 0.3 mm dia. solid boron Stylus tip PF Line contact shape, stylus radius: 7 x 30 micron Weight 8.9 g

PREOWNED - $2150 LIST! - FULLY TESTED - INCLUDES ORIGINAL BOX, MANUAL, CASE, MOUNTING HARDWAREThe DV XX-1 was the first cartridge to feature a magnetic flux damper (patent) and softened magnetism (patent) processes that reject the magnetic fluctuation that is detrimental to a moving coil cartridges performance. The The DV XX-2 MKII retains the benefit of the flux damper but features the Alnico-5 magnet and the similar rigid construction to the Te Kaitora Rua. Alnico magnets exhibit high magnetic flux density combining with a low coercive therefore magnetic resistance is lower than other magnetic types such as rare earth and ferrite, providing the exceptional stability of the XX-2 MKII output voltage. There is also the additional advantage of low magnetic and electrical resistance contributing to a discernable improvement in sound quality. The XX-2MKII also exhibits deep powerful bass, treble is both clear and lively possessing none of the hardness found in many moving coil designs. The XX-2MKII also features a 6 mm solid boron cantilever fitted with a Pathfinder Line contact stylus. PCOCC (pure copper ohno continuous casting process) copper wire is used for the coil. The output voltage of 0.28mV is higher than that of the XX-2 and 6 ohms impedance are suited to most moving coil phono stages. For ridgity of construction the XX-2 MKII cartridge body is machined from 7075 aluminium the hardest available. However, having only a total weight of only 8.9 grams it is suitable for a variety of popular tonearms. Type Low output moving coil cartridge with Alnico magnet and Flux damper Output Voltage 0.28mV (at 1KHz, 5cm/sec.) Channel Separation 30 dB (at 1KHz) Channel balance 1.0 dB (at 1KHz) Frequency response 20 - 20,000Hz (± 1dB) Compliance 10 mm/N Tracking force 1.8 - 2.2 g Impedance 6 ohms Recommended load impedance > 30 ohms Cantilever 6mm length 0.3 mm dia. solid boron Stylus tip PF Line contact shape, stylus radius: 7 x 30 micron Weight 8.9 g