Dynavector dv 20 b type 2 in ovp und Messprotokoll.Ich habe es angeschlossen und es funktioniert tadellos.Was mir aufgefallen ist, dass der Nadelschutz etwas leichtgängig ist und in der offenen Stellung nicht einrastet.Den Nadelschutz kann man so weit über den Tonabnehmer klappen, dass dieser in der oberen Position bleibt. MC High Output (3,6 mV Ausgangsspannung)

Dynavector dv 20 b type 2 in ovp und Messprotokoll.Ich habe es angeschlossen und es funktioniert tadellos.Was mir aufgefallen ist, dass der Nadelschutz etwas leichtgängig ist und in der offenen Stellung nicht einrastet.Den Nadelschutz kann man so weit über den Tonabnehmer klappen, dass dieser in der oberen Position bleibt. MC High Output (3,6 mV Ausgangsspannung)

Dynavector DV 507 dynamic balance type Tone Arm In Excellent Condition JPN Used Shipping??? Please select the delivery method from the following. Expedited shipping Delivery method : DHL or FedEx or Japan Post *It will arrive in 7-14 days *DHL, FedEx : With Tracking number and insurance. *Japan Post : No Tracking number and insurance. International Buyers - Please Note:??? Important duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with you countrys customs office to determine what these additional costs will be prior to bidding or buying. We wont under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. We will decline to large price reduction offers. Please make offers up to 20%. *Notes (Please read before purchasing.) If the buyers address in a remote location, an additional $25 is required. If the buyer cancels due to personal reasons, 4% of the selling price will be charged as a cancellation fee. Please be careful not to cancel after purchase.

A late Friend of mine bought this Dynavector XX2 mk2 cartridge soon before he had a fall that broke an ankle, and, then he stopped using his turntable. I’d be surprised if there is more than 100 hours on this cartridge. He left it to me, and as much as I’d like to use it, I need to pay bills. It will come with the paper work, and screw’s, stylus brush and the shabby box I used tape on to keep it closed. It will be packed with care and here’s an opportunity to get a great cartridge that sells for 2150.00 for much less. Item has a few very minor scratches which can be seen in the many photos supplied. I had a tough time trying to get a good shot of the stylus tip, so there are many attempts at that here. The cantilever is straight, and, the tip is intact as it should be. This Cartridge has an Alnico Magnet, and that’s always desirable, no mater what it’s use is. Guitar pickups, Speakers, and cartridges. This alone makes it a more expensive option in the Dynavector line. The DV XX-2 mk ii was the first cartridge (actually, version 1) to feature a magnetic flux damper (patent) and softened magnetism (patent) processes that reject the magnetic fluctuation that is detrimental to a moving coil cartridges performance. The The DV XX-2 MKII retains the benefit of the flux damper but features the Alnico-5 magnet and the similar rigid construction to the Te Kaitora Rua. Alnico magnets exhibit high magnetic flux density combining with a low coercive therefore magnetic resistance is lower than other magnetic types such as rare earth and ferrite, providing the exceptional stability of the XX-2 MKII output voltage. There is also the additional advantage of low magnetic and electrical resistance contributing to a discernable improvement in sound quality. The XX-2MKII also exhibits deep powerful bass, treble is both clear and lively possessing none of the hardness found in many moving coil designs. The XX-2MKII also features a 6 mm solid boron cantilever fitted with a Pathfinder Line contact stylus. PCOCC (pure copper ohno continuous casting process) copper wire is used for the coil. The output voltage of 0.28mV is higher than that of the XX-2 and 6 ohms impedance are suited to most moving coil phono stages. For ridgity of construction the XX-2 MKII cartridge body is machined from 7075 aluminium the hardest available. However, having only a total weight of only 8.9 grams it is suitable for a variety of popular tonearms. Specifications Type Low output moving coil cartridge with Alnico magnet and Flux damper Output Voltage 0.28mV (at 1KHz, 5cm/sec.) Channel Separation 30 dB (at 1KHz) Channel balance 1.0 dB (at 1KHz) Frequency response 20 - 20,000Hz (± 1dB) Compliance 10 mm/N Tracking force 1.8 - 2.2 g Impedance 6 ohms Recommended load impedance > 30 ohms Cantilever 6mm length 0.3 mm dia. solid boron Stylus tip PF Line contact shape, stylus radius: 7 x 30 micron Weight 8.9 g

Dynavector DV-505 Bi-Axis Inertia Controlled Dynamic Balance Type Tone Arm Blue Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents.Output from both channels. Each adjustment point, operation feeling. Height adjustment, etc. The appearance is a beautiful product without any noticeable scratches. Overview As is commonly known, a pickup cartridge generates electricity by cantilever motion relative to motion of cartridge proper. While cantilever stylus precisely traces signals recorded in groove of disk, cartridge proper receives those signals faithfully provided that it is held motionless (free of vibration). Hence, the great role of a tone arm. How should cartridge be held motionless without adverse effects on signal trackability? The DV-505 has solved this problem by adopting the unique (vertical/horizontal) Bi-axis system. The horizontally movable main arm is of sufficient weight for vibration-free operation, and the adverse effect of weight on signal trackability is nullified by use of an angular-radial compound bearing design. Conversely, the vertically movable sub-arm is made so light that it never lets the stylus jump the groove of even a disk with warp(s) previously unnegotiable. Also, the DV-505 employs a double damper method -- inertia controlled dynamic damping type plus electro-magnetic damping type -- to introduce an ideal solution to the problem of tone arm resonance in low frequency range. This has generally been neglected about audio equipment that absolutely requires a flat frequency characteristic. Specifications Type:Bi-axls inertia controlled dynamic balance type tone armTotal length:335mm (including shell)Effective length:241mmOverhang:15mmOffset angle:21.5 degreeHeight:72mm (liftable to max. 94mm)Height adjustability:37-70mm (at sub arm center)Optimum cartridge weight:0 - 23g (or up to 35g including headshell)Tracklng force adjustability:0 - 3g by 0.25g stepLateral tracking angle error: -1.1 degree to +2.2 degree(0 degree at inner band of record disk, 2.2 degree at outside)Motion sensitivity:Lateral -- less than 50 mg ,Vertical -- less than 50 mgNet weight: 1,250 gOutput connector:5P connector with low resistance cord 0.025 ohms/m, 37pF/mHead connector:EIA standards Accessories Main weightSub weights x 3 (large/medium/small)Lateral weightsInside force canceller weightPHONO cableAccessory bushingsBase fixing screws x 4TemplateInstruction Manual × 2 (Original Japanese/English)Styrofoam case (no original box) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Dynavector DV505 Dynamic Balance Type Tone Arm. This unit is in good working condition (please see photos).

Excellent condition, working. Selling as shown. Comes in original box with manual. Ships out on next business day via US Mail

Dynavector Dv505 Plattenspieler PeripheriegeräteDas Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns.ZahlungSeien Sie versichert, dass unser Shop eine Vielzahl von Zahlungsmethoden anbietet.Bitte zahlen Sie innerhalb von 5 Tagen nach Auktionsende.Über unsWir sind in Japan ansässig. Überprüfen Sie bei elektrischen Produkten den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. Es ist uns eine Freude, Sie glücklich zu machen, indem wir Ihnen unseren empfohlenen Artikel vorschlagen.Wenn Sie Fragen oder Wünsche zu Artikeln haben, wenden Sie sich bitte an uns.Internationale Käufer – Bitte beachten Sie:-Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers.- Bitte erkundigen Sie sich vor dem Bieten/Kauf beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sein werden.-Diese Gebühren werden normalerweise von der ausliefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten.-Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbieten ein solches Verhalten.]]>Wir sind in Japan ansässig. Überprüfen Sie bei elektrischen Produkten den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. -Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers. -Diese Gebühren werden normalerweise von der ausliefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten. -Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbiete Capacity NA Item Width NA Compatible Product Line NA Country/Region of Manufacture NA Unit Quantity NA Type NA Brand Dynavector Plug Regional Fitment NA California Prop 65 Warning NA Item Length NA Year Manufactured NA Unit Type NA Country Japan UPC NA Compatible Model NA Item Weight NA Manufacturer Warranty NA Item Height NA Features NA Color NA Compatible Brand NA MPN NA

PaymentRest assured that our store offers a variety of payment methods.Please pay within 5 days after auction is finished. About UsWe are located in Japan.For electrical products check the manufacturer and product and convert to the voltage of each country.We plan to ship by FedEx or DHL.Please contact us as the shipping fee can be changed in some cases. Its our pleasure to make you happy by proposing our recommend item.If you have any questions or request about items please feel free to ask us. International Buyers - Please Note:-Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.-Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.-These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.-We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior.>

Free eBay listing template designed by dewiso.com Features and further detailsPackage Includes: Main weightSub weight x 3 (A, B, C type)Head shellPHONO cableBase fixing screws x 3Instruction Manual (original)Template (original)Contact us We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond to you within 24 hours and do our best to help you out! We encourage our customers to contact us with any questions or concerns! Wed like to be sure you are completely satisfied with your purchase.ShippingWe ship within 5 days of receiving your order. Shipping includes tracking. Expedited shipping- EMS or FedEx or DHL Standard shipping- AIR MAIL or FedEx or DHLReturnsReturns are accepted ONLY if the item was not the item described. In that case, you need to prove it to us. International Buyers - Please Note1. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. 2. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. 3. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Dynavector Dv505 Disque Lecteur PériphériquesCette fiche produit est originalement écrite en anglais. Veuillez trouver ci dessous une traduction automatique en français. Si vous avez des questions veuillez nous contacter.PaiementSoyez assuré que notre magasin offre une variété de méthodes de paiement.Veuillez payer dans les 5 jours suivant la fin de lenchère.À proposNous sommes situés au Japon. Pour les produits électriques, vérifiez le fabricant et le produit et convertissez-les à la tension de chaque pays. Nous prévoyons dexpédier par FedEx ou DHL. Veuillez nous contacter car les frais dexpédition peuvent être modifiés dans certains cas. Cest avec plaisir que nous vous ferons plaisir en vous proposant notre article recommandé.Si vous avez des questions ou des demandes concernant des articles, nhésitez pas à nous les demander.Acheteurs internationaux - Veuillez noter :-Les droits dimportation, les taxes et les frais ne sont pas inclus dans le prix de larticle ou les frais dexpédition. Ces charges sont sous la responsabilité de lacheteur.-Veuillez vérifier auprès du bureau de douane de votre pays pour déterminer quels seront ces coûts supplémentaires avant denchérir/acheter.-Ces frais sont normalement perçus par la société de livraison de fret (expédition) ou lorsque vous récupérez larticle - ne les confondez pas avec des frais dexpédition supplémentaires.-Nous ne marquons pas les valeurs des marchandises en dessous de la valeur ou ne marquons pas les articles comme - des cadeaux - Les réglementations gouvernementales américaines et internationales interdisent un tel comportement.]]>Nous sommes situés au Japon. Pour les produits électriques, vérifiez le fabricant et le produit et convertissez-les à la tension de chaque pays. Nous prévoyons dexpédier par FedEx ou DHL. Veuillez nous contacter car les frais dexpédition peuvent être modifiés dans certains cas. -Les droits dimportation, les taxes et les frais ne sont pas inclus dans le prix de larticle ou les frais dexpédition. Ces charges sont sous la responsabilité de lacheteur. -Ces frais sont normalement perçus par la société de livraison de fret (expédition) ou lorsque vous récupérez larticle - ne les confondez pas avec des frais dexpédition supplémentaires. -Nous ne marquons pas les valeurs des marchandises en dessous de la valeur ou ne marquons pas les articles comme - des cadeaux - Les réglementations gouv Capacity NA Item Width NA Compatible Product Line NA Country/Region of Manufacture NA Unit Quantity NA Type NA Brand Dynavector Plug Regional Fitment NA California Prop 65 Warning NA Item Length NA Year Manufactured NA Unit Type NA Country Japan UPC NA Compatible Model NA Item Weight NA Manufacturer Warranty NA Item Height NA Features NA Color NA Compatible Brand NA MPN NA

Dynavector Dv505 Plattenspieler PeripheriegeräteDas Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns.ZahlungSeien Sie versichert, dass unser Shop eine Vielzahl von Zahlungsmethoden anbietet.Bitte zahlen Sie innerhalb von 5 Tagen nach Auktionsende.Über unsWir befinden uns in Japan. Überprüfen Sie für elektrische Produkte den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. Es ist uns eine Freude, Sie glücklich zu machen, indem wir Ihnen unseren empfohlenen Artikel vorschlagen.Wenn Sie Fragen oder Wünsche zu Artikeln haben, wenden Sie sich bitte an uns.Internationale Käufer – Bitte beachten Sie:-Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers.- Bitte erkundigen Sie sich vor dem Bieten/Kauf beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sein werden.-Diese Gebühren werden normalerweise von der liefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten.-Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbieten ein solches Verhalten.]]>Wir befinden uns in Japan. Überprüfen Sie für elektrische Produkte den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. -Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers. -Diese Gebühren werden normalerweise von der liefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten. -Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbieten ein Capacity NA Item Width NA Compatible Product Line NA Country/Region of Manufacture NA Unit Quantity NA Type NA Brand Dynavector Plug Regional Fitment NA California Prop 65 Warning NA Item Length NA Year Manufactured NA Unit Type NA Country Japan UPC NA Compatible Model NA Item Weight NA Manufacturer Warranty NA Item Height NA Features NA Color NA Compatible Brand NA MPN NA

Dynavector Dv505 Giradischi PerifericheQuesto foglio informativo sul prodotto è stato originariamente stilato in lingua inglese. Si prega di consultare appresso una traduzione automatica dello stesso in lingua italiani. Per ogni domanda, si invita cortesemente a contattarci.PagamentoSiate certi che il nostro negozio offre una varietà di metodi di pagamento.Si prega di pagare entro 5 giorni dal termine dellasta.Chi siamoCi troviamo in Giappone. Per i prodotti elettrici, controllare il produttore e il prodotto e convertirli alla tensione di ciascun paese. Prevediamo di spedire tramite FedEx o DHL. Vi preghiamo di contattarci poiché in alcuni casi le spese di spedizione possono essere modificate. È nostro piacere renderti felice proponendoti il ??nostro articolo consigliato.Se hai domande o richieste sugli articoli, non esitare a chiederci.Acquirenti internazionali - Nota:-I dazi doganali, le tasse e le spese non sono inclusi nel prezzo dellarticolo o nelle spese di spedizione. Queste spese sono a carico dellacquirente.-Si prega di verificare con lufficio doganale del proprio paese per determinare quali saranno questi costi aggiuntivi prima dellofferta/acquisto.-Queste spese vengono normalmente riscosse dalla società di spedizione (spedizione) o al momento del ritiro dellarticolo - non confonderle con spese di spedizione aggiuntive.-Non contrassegniamo i valori della merce al di sotto del valore né contrassegniamo gli articoli come - regali - Le normative governative statunitensi e internazionali vietano tale comportamento.]]>Ci troviamo in Giappone. Per i prodotti elettrici, controllare il produttore e il prodotto e convertirli alla tensione di ciascun paese. Prevediamo di spedire tramite FedEx o DHL. Vi preghiamo di contattarci poiché in alcuni casi le spese di spedizione possono essere modificate. -I dazi doganali, le tasse e le spese non sono inclusi nel prezzo dellarticolo o nelle spese di spedizione. Queste spese sono a carico dellacquirente. -Queste spese vengono normalmente riscosse dalla società di spedizione (spedizione) o al momento del ritiro dellarticolo - non confonderle con spese di spedizione aggiuntive. -Non contrassegniamo i valori della merce al di sotto del valore né contrassegniamo gli articoli come - regali - Le normative governative statunitensi e internazionali vietano tale comportam Capacity NA Item Width NA Compatible Product Line NA Country/Region of Manufacture NA Unit Quantity NA Type NA Brand Dynavector Plug Regional Fitment NA California Prop 65 Warning NA Item Length NA Year Manufactured NA Unit Type NA Country Japan UPC NA Compatible Model NA Item Weight NA Manufacturer Warranty NA Item Height NA Features NA Color NA Compatible Brand NA MPN NA

PaymentRest assured that our store offers a variety of payment methods.Please pay within 5 days after auction is finished. About UsWe are located in Japan.For electrical products check the manufacturer and product and convert to the voltage of each country.We plan to ship by FedEx or DHL.Please contact us as the shipping fee can be changed in some cases. Its our pleasure to make you happy by proposing our recommend item.If you have any questions or request about items please feel free to ask us. International Buyers - Please Note:-Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.-Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.-These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.-We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior.>

Dynavector DV10X4 MKII High Output Cartridge - Opened Box. One Dynavector DV10X4 MKII High Output Cartridge complete with connectors and screwdriver for sale. Note: I do not know whether this has been used or not. I am assuming not because the wiring is still in the bag. Only bid if you accept that the stylus may or may not be new. Thanks for looking Insured shipping by Royal Mail Security marked Payment by eBay! Any questions please ask. Note 2 if you know how to test with a multimeter then I’m happy to do so!.. also I could test in on my 1210 MK2 if the cartridge is compatible?

DescriptionUsed Condition? Operation?We have confirmed the operation of our equipment.?Output from both channels?Descent speed of the lifter (Oil replenished)? Each adjustment point, operation feeling?Height adjustment, etc.There is no problem in operation. ? commodity contentsManufacturer: DynavectorModel number: DV-507Total length: about 255mm (not including shell)Cartridge usage range: 15g ~ 35g (including shell) ?Accessories?Main weight?Sub weight x 3 (A, B, C type)?Head shell?PHONO cable?Base fixing screw x 3Please check the status description. PolicyPaymentPlease pay within 5 days after auction is finished.About UsAll of our goods are genuine articles. Moreover, we sell honestly. Please contact me, if you have your question.International Buyers - Please Note:Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

PREOWNED - $2150 LIST! - FULLY TESTED - INCLUDES ORIGINAL BOX, MANUAL, CASE, MOUNTING HARDWAREThe DV XX-1 was the first cartridge to feature a magnetic flux damper (patent) and softened magnetism (patent) processes that reject the magnetic fluctuation that is detrimental to a moving coil cartridges performance. The The DV XX-2 MKII retains the benefit of the flux damper but features the Alnico-5 magnet and the similar rigid construction to the Te Kaitora Rua. Alnico magnets exhibit high magnetic flux density combining with a low coercive therefore magnetic resistance is lower than other magnetic types such as rare earth and ferrite, providing the exceptional stability of the XX-2 MKII output voltage. There is also the additional advantage of low magnetic and electrical resistance contributing to a discernable improvement in sound quality. The XX-2MKII also exhibits deep powerful bass, treble is both clear and lively possessing none of the hardness found in many moving coil designs. The XX-2MKII also features a 6 mm solid boron cantilever fitted with a Pathfinder Line contact stylus. PCOCC (pure copper ohno continuous casting process) copper wire is used for the coil. The output voltage of 0.28mV is higher than that of the XX-2 and 6 ohms impedance are suited to most moving coil phono stages. For ridgity of construction the XX-2 MKII cartridge body is machined from 7075 aluminium the hardest available. However, having only a total weight of only 8.9 grams it is suitable for a variety of popular tonearms. Type Low output moving coil cartridge with Alnico magnet and Flux damper Output Voltage 0.28mV (at 1KHz, 5cm/sec.) Channel Separation 30 dB (at 1KHz) Channel balance 1.0 dB (at 1KHz) Frequency response 20 - 20,000Hz (± 1dB) Compliance 10 mm/N Tracking force 1.8 - 2.2 g Impedance 6 ohms Recommended load impedance > 30 ohms Cantilever 6mm length 0.3 mm dia. solid boron Stylus tip PF Line contact shape, stylus radius: 7 x 30 micron Weight 8.9 g

Item TitleDynavector Dv505 Record Player Peripherals Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

Here is a very rare opportunity to buy an unused, never fitted, essentially brand new mostly still originally packaged, Dynavector DV 507 MK2 Tonearm. This was purchased a while ago for a Thorens TD124, at a price of around £6,000 if recalled correctly. The arm itself was unpacked for inspection only, and the base mount only was handled to prepare for mounting to a Thorens TD 124 armboard, but sadly illness prevented the build going any further and it was put back away and the project shelved. Obviously it also comes with all cables, hardware, weights, templates, paperwork, protractor, etc etc, to repeat, this is brand new and never used or fitted to a turntable, only partially opened, inspected, the base mount offered up to a Thorens TD124 armboard, and packed away again, thats it! We have just sold the TD124 turntable, so this Tonearm is now surplus and for sale, and we may included the new Thorens armboard if the right price is achieved Using online retailers as guide prices, mk2 507 seem to priced at around the £4k mark for USED examples, but this has never been fitted, or met a turntable, played a record, or even seen light of day mostly! Potentially at £4195 it is cheap, but were open to sensible offers and invite negotiations. Collection in person is from Nottingham, but clearly it could be packaged and dispatched due to its small size, however, I will leave it up to the buyer to find and book a reliable courier service who they trust and can insure a £4k parcel value. Payment must be in person with cash, or direct person to person bank transfer, unless the buyer is prepared to cover the extra fees involved with paypal etc? Please feel free to discuss any aspect of this sale with me via messaging or better yet a good old natter! (O7875749472) Thanks for looking, and happy shopping... Heres the marketing info and specs The Long-Awaited Debut of the Dynavector DV 507MKII Tonearm:The new MKII version of the Dynavector DV 507 tonearm has made its long-awaited debut, building on the strengths of the original DV 507 which has enjoyed the highest reputation among audiophiles world-wide since its appearance in 1984.As it is a bi-axis inertia controlled tonearm the DV 507, no matter the type of cartridge can trace the music signal grooves cut in the recording with extreme accuracy. The DV 507 also provides superb tracking ability on warped recordings. Resolution and musical detailing are quite remarkable.Special Features:High precision all stainless steel bearings:The use of precision stainless steel bearings give superb dynamic sensitivity and a stabilised tracking performance without any deterioration through ageing.Non-contact electro-magnetic damper:The use of new type damper with a powerful Neodymium magnet gives better damping and ensures that any adverse effects on tracking performance are minimised.Large arm lift:A larger arm lift gives a stable lift action which maintains its performance over long periods enabling cartridges to be raised and lowered without stress.Detachable headshell plug in connector:The use of a new type of plug-in connector ensures that good contact is maintained with the Rhodium coated headshell contact pin during long-term use.New style headshell and lead wires:The new style headshell is suitable for use with a wide variety of cartridges. It is machined from aluminium alloy and has an EIA standard connector. This allows the cartridge to be rigidly mounted and the azimuth adjustment. Pure 6N wire is used in lead wires for the headshell and internal wires of the arm.High-quality arm cable:A machined aluminium connector is used. The 5 PIN connector conforms to the DIN standard. Double balanced type shield wire and 4N OFC / 6N hybrid construction arm cable.Advantages of Bi-Axis Inertia Controlled Dynamic Balance Type Tonearm:A tone arm is required to operate in two important ways so as to ensure that the cartridge can reproduce faithfully the signal from the record groove.First, there is the need to support the cartridge so that the transfer of the cantilever motion accurately mirrors the audio signal.Secondly, it must maintain an excellent tracking ability for warped records since few records are perfectly flat.These requirements can conflict with each other. However, the bi-axis tonearm provides an effective solution to the problem.Main Features: Electro Magnetic Damping System for accurate trackingArm Lift providedEasy Height AdjustmentDynamic Balance Tracking Force AdjusterDynamic Damper installed in sub armTo make the DV 507 MKII compatible with a wide variety of turntables, the overall length and height of the arm have both been reduced compared to the earlier versions. The DV505 and DV501 have enjoyed an excellent reputation in the European audio market since being awarded the Design and Engineering Award at C.E.S. Chicago in 1977,1982 and 1985.The DV507MKII has important sonic improvements as well as being easier to install and use. It includes all of the technology of our tonearm design developed since the DV505 and 501.Bi-axis inertia separation for accurate signal reproduction and superb tracking ability:Bi-axis inertia separation may sound complex but it simply refers to a tone arm having two arms which operate independently in the horizontal and vertical planes. In contrast, a conventional tonearm has only one arm which moves both horizontally and vertically. This is called a gimbal type tonearm and the inertia for both planes is the same.The DV507 bi-axis tone arm has a large inertia for horizontal movement and a very small inertia for vertical movement. We shall now explain the reasons why this is advantageous.It is well known that a cartridge generates an audio signal by the differential motion between the cantilever and the cartridge body. Consequently, if the supporting point of the cartridge (the tonearm) vibrates, the tonearm motion affects the audio signal.In these conditions, the signal, which causes the tonearm to vibrate is of low frequency and large amplitude.In the currently used 45-45 stereo record cutting procedure, low frequency signals are almost entirely recorded in a horizontal direction. This means that the low frequency signal, which can cause vibration in the tone arm, exists only as a horizontal force.The tonearm therefore must have sufficient effective mass and rigidity in the horizontal plane in order to provide a stable platform for the cartridge.On the other hand, for the mid to high frequencies, the effective mass of the tonearm should not be too large since the combined mass of the cartridge and the head shell need to be taken into account as well. In particular, where records have a warped surface, the vertical effective mass needs to be small enough to ensure a good tracking ability on such surfaces.To summarise; the tone arm should have a large effective mass and enough damping in the horizontal plane and at the same time a small effective mass in the vertical plane.These conditions are almost impossible to achieve with a tone arm of conventional design using a simple gimbal pivoting system. To solve the problem, Dynavector designed a bi-axis, inertia controlled tonearm where the shorter and lightweight vertical sub arm is placed at the end of the horizontal main arm. This is the special feature of our design.To illustrate how the system works in practice, the following measurements will be of interest: Cartridge behaviour with two different types of tone arm was analysed when tracing warped discs. Fig. 1 is with a conventional tone arm and Fig. 2 with the DV507.In these figures line A refers to the displacement of the record surface and line B the behaviour of the cartridge body. With a conventional tonearm, the displacement of the cartridge is much larger than the actual warp on the disc. At times the cantilever does not touch the record surface. However, the DV507 shows a much better tracking ability because of its low vertical inertia. Neodymium magnet for eddy current dynamic damping:A non-contact, electromagnetic damping mechanism has been designed to prevent sound distortion and poor tracking performance arising from arm resonances induced by low frequencies.In this system, a curved rod attached to the rear of the arm is mounted in a magnetic field supplied by two powerful neodymium magnets. Any minute movement of the rod, due to an un-damped arm resonance, causes an eddy current to be induced in the rod, which in turn interacts with the magnetic field to return the system to its rest state.As already demonstrated in our DV505 and DV501 arms, this damping system is highly reliable as there is no performance loss with extended use. Expensive Neodymium magnets are employed because of their superior properties and the thicker copper damping plate used gives a much better damping action.Dynamic Balance Tracking Force Mechanism:The tracking force is applied by a precision spiral spring device. This dynamic balance system maintains an unvarying tracking force regardless of any record warp. Tracking force is easily adjusted by turning a calibrated dial.High precision, stainless steel bearings are used in the sub arm. By having a long span bearing support, the dynamic sensitivity has been further improved. The vertical shaft to which the sub arm is attached has a smooth bearing action, an important factor for the arms operation and sound reproduction quality. Thus tracking ability has been significantly improved and the bearing mechanism performance enhanced.Dynamic Damper in the sub armMost tonearms have some frequency response irregularity in the mid-low range at about 100-150Hz. This is called multi-resonance or anti-resonance. To eliminate such unwanted resonances, a dynamic damper has been installed in the bottom of the sub arm. This solution was developed after much theoretical consideration and experimentation. Ease of handling and operation:A larger arm lift has been provided to ensure ease of operation so that cartridges can be raised and lowered without stress. The arm lift has also been improved to provide long-term stability of performance.To adjust the VTA (Vertical Tracking Angle of the stylus to the record surface) more easily, a height adjusting lever is provided. The height can be adjusted more precisely than with other systems, within a range of 0 to 7mm.The anti-skating force is set using a dial indicator. The anti-skating force can be adjusted even while playing a record.Simplified Installation:The overall length of the DV507MKII has been shortened and is now similar to conventional tonearms in spite of its bi-axis design. It is thus easy to install on most turntables.A fixing hole with a diameter of 29 mm is needed to install the DV507MKII on the turntable board. The distance from the centre of the fixing hole on the arm board to the centre of the turntable spindle should be 226 mm. Specifications:Type:Bi-Axis inertia controlled Dynamic and Eddy Current Damping Dynamic Balance type tone armOverall length:306mm. With head shell: max 326 mmEffective length:241mm (i.e. tonearm pivot point to cartridge stylus point)Overhang:15mmOffset angle:21.5 degreeHeight:59mm lifts up to 92mmHeight adjustment range:39mm-72mm at sub arm centreDepth:36mm without connecting cableOptimum cartridge weight:15-35 g, including headshellHorizontal tracking angle error:-1.1 degree - +2.2 degree , 0 degree at inner band of record, 2.2 degree at outsideTracking force adjustment range:0-38 g by 0.2 g stepSensitivity:Horizontal: less than 50 micrograms, Vertical: less than 40 microgramsNet weight:1,380 gOutput connection:5P connectorHeadshell connection:EIA standards 4 Pin connectorAccessories:Low resistance (0.046 ohms/m, 54pF/m) high quality arm cable, Milled aluminium headshell weight 15.4 g. Mounting template for the arm

Dynavector Dv505 Plattenspieler PeripheriegeräteDas Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns.ZahlungSeien Sie versichert, dass unser Shop eine Vielzahl von Zahlungsmethoden anbietet.Bitte zahlen Sie innerhalb von 5 Tagen nach Auktionsende.Über unsWir befinden uns in Japan. Überprüfen Sie für elektrische Produkte den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. Es ist uns eine Freude, Sie glücklich zu machen, indem wir Ihnen unseren empfohlenen Artikel vorschlagen.Wenn Sie Fragen oder Wünsche zu Artikeln haben, wenden Sie sich bitte an uns.Internationale Käufer - Bitte beachten Sie:-Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren gehen zu Lasten des Käufers.-Bitte erkundigen Sie sich beim Zollamt Ihres Landes, welche zusätzlichen Kosten vor dem Bieten/Kaufen anfallen.- Diese Gebühren werden normalerweise von der liefernden Spedition (Spedition) erhoben oder wenn Sie den Artikel abholen - verwechseln Sie sie nicht mit zusätzlichen Versandkosten.- Wir kennzeichnen Warenwerte nicht unter Wert oder Artikel als - Geschenke - Die US-amerikanischen und internationalen Regierungsvorschriften verbieten ein solches Verhalten.]]>Wir befinden uns in Japan. Überprüfen Sie für elektrische Produkte den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. -Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren gehen zu Lasten des Käufers. -Bitte erkundigen Sie sich beim Zollamt Ihres Landes, welche zusätzlichen Kosten vor dem Bieten/Kaufen anfallen. - Diese Gebühren werden normalerweise von der liefernden Spedition (Spedition) erhoben oder wenn Sie den Artikel abholen - verwechseln Sie sie nicht mit zusätzlichen Versandkosten. - Wir kennzeichnen Warenwerte nicht unter Wert oder Artikel als - Geschenke - Die Capacity NA Item Width NA Compatible Product Line NA Country/Region of Manufacture NA Unit Quantity NA Type NA Brand Dynavector Plug Regional Fitment NA California Prop 65 Warning NA Item Length NA Year Manufactured NA Unit Type NA Country Japan UPC NA Compatible Model NA Item Weight NA Manufacturer Warranty NA Item Height NA Features NA Color NA Compatible Brand NA MPN NA

pleasE read!!!! MY auction carefully and comepletely!!! b e f o r e bidDING!!! THANK YOU PLEASE NOTE ~~~ DISCLAIMER~~~ “Warranty / Guaranty / Exchange / Refund / Returns & Other Important Information,” PLEASE READ! IMPORTANT THE ITEM(S) ADVERTIZED IN THIS EBAY AUCTION ARE BEING SOLD IN AS-IS CONDITION. NO WARRANTIES OR GUARANTEE’S ARE GIVEN EXPRESSED OR IMPLIED. ITEMS MAY “APPEAR” TO WORK / FUNCTION BUT ARE “NOT” FULLY TESTED UNLESS STATED AS SO “SPECIFICALLY” IN THE AUCTION DESCRIPTION. PICTURES SHOWN ARE OF THE ACTUAL ITEM(S) BEING ADVERTIZED FOR SALE. NO EXCHANGES NO REFUNDS / NO RETURNS ACCEPTED. ALL SALES WILL BE FINAL. PLEASE BID ACCORDINGLY “BY PLACING YOUR BID YOU HAVE ACCEPTED THIS DISCLAIMER UNCONDITIONALLY” HERE WE A VINTAGE audiofile HIGH END “DYNAVECTOR DV 20B TYPE 2 CARTRIDGE WITH SHELL” IN THE ORIGINAL BOX WITH FULL DOCUMENTAION ! VERY HIGH OUTPUT 3.6mv very flat frequency responseSpecifications DV/20B Type2Output Voltage: 3,6 mV at 1 kHz, 5cm/secSeparation: Over 20 dB at 1 kHzFrequency Response: 20 - 40,00 HzStylus: Elliptical (0,3 x 0,7 mil)Cantilever: Straight Solid BeryliumCompliance: 24 x 10¯?? cm/dynWiring Impedance: R = 510? L = 1,0 mHTracking Force: 1,8 grTotal Weight: 5,3 gr fibre-glass reinforced body documentation from bruel & kjcer copenhagen denmark please note : **needs stylus** please look at the pictures shown ***UNTESTED sold AS SHOWN *** FROM MY SADDLE RIVER NJ ESTATE THAT IS PET FREE / DUST FREE / SMOKE FREE WHAT YOU SEE IN THE PICTURES IS WHAT YOU WILL RECEIVE. SO DON’T MISS IT ! BID now for the LOW starting bid of just $265.00 !! OR BUY ~ IT ~ NOW FOR $850 Plus $13.00 shipping ! VINTAGE DYNAVECTOR from JAPAN SOLD AS SHOWN ( UNTESTED ) NO RETURNS FOR ANY REASON SOLD AS-IS THANK YOU FOR LOOKING SORRY NO INTERNATIONAL BIDDERS $265 .00 OPENING BID !!!! BIDDING STARTS AT JUST $265.00 don’t WAIT TILL THE LAST MINUTE & LET IT GET AWAY secure your bid now! Happy bidding to all!!! IMPORTANT! IF YOU HAVE ZERO FEEDBACK PLEASE CONTACT ME BEFORE YOU BID OR YOUR BID WILL BE CANCELLED NO EXCEPTIONS!!! I try to describe items to the best of my ability, What I may think is ok, you may not. Please ask any questions before bidding, as items are sold as is. SHIPPING FLAT RATE OF JUST $13.00 NO SHIPPING TO HAWAII / PUERTO RICO OR ALASKA PAYMENT TERMS: PAYMENT IS DUE NO LATER THAN 2 DAYS FROM THE CLOSE OF THE AUCTION BID WITH CONFIDENCE AS I HAVE OVER 1300 POSITIVE FEEDBACKS, CHEERS FROM NJPIANOSTAR/NEW JERSEY’S PREMIER ENTERTAINER/PIANIST SARAH THE PIANO GIRL