fonolab Tamura MC-20 Custom Step-Up transformer with the LOAD EQ correction modules NEW FUNCTION ADDED: The transformer is equipped with a demagnetization function. The Demagnetizer switches demagnetizes the cartridge and the step-up transformer. Please push both buttons simultaneously and hold them for ten seconds while listening to music from the record. As long as you press the buttons, the music stops. A cartridge and a transformer are demagnetized by the interchange signal of the LP. MC-20 features: It has separates transformers inside: the input for 3ohm is connected to the output for 4.7kohm. Also, the input for both 20ohm and 40ohm are connected to the next output for 4.7kohm. MC step-up transformer which has both ultra-wide band and ultra-small distortionPermalloy toroidal core transformers (specially manufactured by Tamura Corp.) is used for each channel The custom-made aluminum case equipped with highly efficient internal damping materials with 2mm solid copper shielding elementsStainless-steel non-magnetic screws to minimize the influence of the magnetic distortion; thereby the clear sound has been realized LC-OFC is used for the wiring material High quality Gold-plated brass RCA connectors with Teflon insulation Suitable for almost all MC cartridges (Koetsu, Van den Hul, Ortofon, Lyra etc.) with LP playing of fine quality. The transformers are thoroughly demagnetized and checked in our laboratory. Specifications: Input impedance: 3 / / 20 / 40 Ohms Output impedance: 4,7k Ohms Frequency response: 5Hz to 80kHz (+-1.0dB) Ratio: 1:50,1 / / 1:20 / 1:14,1 Located in the Czech Republic, no special fees for EU customers. Express Shipping : 3 - 10 days.Standard Shipping : 7 -14 days.Economy Shipping : 10 - 28 days. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility.

fonolab Tamura MC-20 Custom Step-Up transformer with the LOAD EQ correction modules NEW FUNCTION ADDED: The transformer is equipped with a demagnetization function. The Demagnetizer switches demagnetizes the cartridge and the step-up transformer. Please push both buttons simultaneously and hold them for ten seconds while listening to music from the record. As long as you press the buttons, the music stops. A cartridge and a transformer are demagnetized by the interchange signal of the LP. MC-20 features: It has separates transformers inside: the input for 3ohm is connected to the output for 4.7kohm. Also, the input for both 20ohm and 40ohm are connected to the next output for 4.7kohm. MC step-up transformer which has both ultra-wide band and ultra-small distortionPermalloy toroidal core transformers (specially manufactured by Tamura Corp.) is used for each channel The custom-made aluminum case equipped with highly efficient internal damping materials with 2mm solid copper shielding elementsStainless-steel non-magnetic screws to minimize the influence of the magnetic distortion; thereby the clear sound has been realized LC-OFC is used for the wiring material High quality Gold-plated brass RCA connectors with Teflon insulation Suitable for almost all MC cartridges (Koetsu, Van den Hul, Ortofon, Lyra etc.) with LP playing of fine quality. The transformers are thoroughly demagnetized and checked in our laboratory. Specifications: Input impedance: 3 / / 20 / 40 Ohms Output impedance: 4,7k Ohms Frequency response: 5Hz to 80kHz (+-1.0dB) Ratio: 1:50,1 / / 1:20 / 1:14,1 Located in the Czech Republic, no special fees for EU customers. Express Shipping : 3 - 10 days.Standard Shipping : 7 -14 days.Economy Shipping : 10 - 28 days. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility.

This 12V step-up USB cable enables you to power up to two (2) computer fans at full speed from a conventional USB port.Cool down a wide variety of electronics devices that output USB power once powered on (consoles, networking applicances, professional equipment, etc.)12V voltage step-up circuit: Inside the USB housing is a voltage boost circuit that takes 5V and outputs up to 12V 0.4A for full power operation. Additional devices such as fan hubs and speed controller can also be used.RoHS Compliant. This cable features all black connectors and a high density sleeve for durability and minimal wire visibility.Cable Length (Including Connectors): 22"e; / 55cmThe CRJ Electronics USB fan cable line of products offers people a convenient way of powering PC fans with a standard USB port. Featuring an internal voltage step-up module you can power up to two 3-pin or 4-pin PC fans with 12V power for full speed operation. It is important to not exceed the current limitation of 0.4 Amps @ 12V (5W) which is a design limitation of conventional USB ports.